No need to have two implementations of this now.
BUG=chromium:611535
BRANCH=none
TEST=make runtests; emerge-kevin coreboot depthcharge
Change-Id: Id3348eae80c5d85451981a44729164ff59f88648
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/399121
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Originally, we didn't trust the firmware to provide these functions from
a standard library. Now, with coreboot, we do.
BUG=chromium:611535
BRANCH=none
TEST=make runtests; emerge-kevin coreboot depthcharge
Change-Id: I4e624c40085f2b665275a38624340b2f6aabcf11
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/399120
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Add a new crossystem value "battery_cutoff_request" to indicate that
next reboot should cut-off battery and shutdown during firmware stage.
This request is primarily for factories to ship devices in an safe
state. Previously we have done same thing by running "ectool battery-cutoff"
but that creates a problem which "ectool" (and the one to request for
cut-off) must live in developer mode while the device must be shipped
in normal mode. The mode transition was solved by setting
"disable_dev_request=1", but that flag is may get lost on x86 systems
(having NV storage in CMOS) when the battery is cut-off .
From the experience from Ryu, such settings (dev mode transition and
battery cut-off) should be done together inside firmware execution so we
can create a new flag, battery_cutoff_request, to finalize device
properly.
BRANCH=none
BUG=chromium:601705
TEST=emerge-chell depthcharge vboot_reference chromeos-bootimage
crossystem battery_cutoff_request=1
# Unplug AC adapter
reboot
# See device rebooted and then shutdown immediately.
# Press power button and system won't boot.
# Attach AC adapter and now system boots.
CQ-DEPEND=CL:337596,CL:338193
Change-Id: I73ccae15b337cd65786106646546c67c155b8fa6
Reviewed-on: https://chromium-review.googlesource.com/337602
Commit-Ready: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This flag will be used by the firmware updater to indicate that RO
software sync should be attempted.
BUG=chrome-os-partner:48703
BRANCH=None
TEST=make runtests
Change-Id: I42090ac47da45c724e66334648ab447ad3c21178
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/320621
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In developer mode, this option will make the system try to boot into
a legacy OS first after the 30 second timeout. This removes the need to
press a key during boot to try legacy mode and the need to remove the
write protect screw to boot legacy as default.
BUG=chromium:310697
BRANCH=none
TEST=make runtests
Change-Id: I9a9f64c14ad015e21d08eec36e8fc187189cd2f2
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/304077
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When a TPM goes from the disabled state to the enabled state, it must
reboot after being enabled, before it can be initialized. In vboot1,
TLCL was part of vboot and this was handled internally. In vboot2, the
caller must set a context flag, so that vboot can decide whether to
allow the reboot, or whether to go directly to recovery mode. This
check is necessary to handle the following cases:
1) The device is booting normally, but the TPM needs a reboot. This
should simply reboot, without going to recovery mode.
2) The device is booting in recovery mode, but the TPM needs a reboot.
If this is the first time it asked us, allow the reboot.
3) The TPM asked for a reboot last time, so we did. And it's still
asking. Don't reboot, because that runs the risk that whatever is wrong
won't be fixed next boot either, and we'll get stuck in a reboot loop
that will prevent recovery. Boot into recovery mode.
Add a new NvStorage bit to track whether the TPM requested a reboot on
the previous boot. That's better than what we did in vboot1, where we
used a special recovery request. Vboot1 couldn't track getting stuck in
a reboot loop in normal mode, only in recovery mode. The new code can
catch both.
BUG=chrome-os-partner:45462
BRANCH=ryu
TEST=make runtests
Change-Id: I2ee54af107275ccf64a6cb41132b7a0fc02bb983
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300572
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
1. Change offset 8 to hold all misc settings (fastboot, boot_on_ac
detect) instead of only fastboot settings.
2. Add flag to hold state of boot_on_ac_detect (If set to 1, AP should
start booting as soon as AC is connected in off-state).
BUG=chrome-os-partner:41680
BRANCH=None
TEST=Compiles successfully. make runtests successful.
Change-Id: I64b3fc69bd52cbcaf5899c953ccafa2e81b5b8a5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/289900
Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Add a new flag to nvstorage for controlling fastboot capabilities
offered in firmware in dev-mode. By default, value of this flag would
be ignored in normal mode. Thus, when fastboot-based recovery is
entered from normal mode, only limited capability would be available
in firmware.
After switching to dev-mode, this flag can be set automatically by
user script after performing the wipe or it can be set manually using
crossystem. When fastboot-based recovery is entered from dev mode and
this flag is set, it will provide full fastboot capability in the
firmware.
BUG=chrome-os-partner:40196
BRANCH=None
TEST=Compiles successfully for smaug. make runalltests successful.
Change-Id: I761a9ab304dd90f0b73081acc9ce1f8d9052325f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/271369
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
For test purposes it should be possible to clear the wipeout request
raised by firmware.
BRANCH=none
BUG=chrome-os-partner:36059
TEST=verified that crossystem wipeout_request=0 changes the bit from 1
to 0, and wipeout_request=1 does not change it from 0 to 1.
Change-Id: Ic45ec03ed3e40e6fee4244804b8c231ee88af95b
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/262466
Reviewed-by: Randall Spangler <rspangler@chromium.org>
It has become necessary to be able to "factory reset" certain devices
on firmware request. The best mechanism for this is NVRAM, as the
request needs to be detected very early in the boot process, before
other means of communications with the upper layers are available.
A previously unused NVRAM bit (bit 0x08 at offset zero) is taken for
this purpose.
A new flag is introduced to allow the firmware to signal the need to
assert this bit.
A new variable name/parameter ('wipeout_request') added to crossystem
to provide user space access to the setting of the dedicated NVRAM
bit.
BRANCH=storm
BUG=chrome-os-partner:37219
TEST=with all the patches applied, on storm, holding the recovery
button at startup for 10 seconds, causes 'crossystem
wipeout_request' to report '1'.
Change-Id: If1f6f061ce5b3f357b92aaa74cb129671dc30446
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/259857
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This gives recovery mode information on two boots back instead of one,
which may be handy for debugging.
It also allows determining whether a failure of the current boot
should try the other slot or go to recovery, using only information
stored in NV storage.
Added crossystem support for printing the fields, and unit tests.
BUG=chrome-os-partner:32585
BRANCH=none
TEST=make runtests; VBOOT2=1 make runtests
Change-Id: Ia9f4186210d30217b902db7c513ae4ab8851f8f4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221230
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
We've been creating and linking against a library called "libvboot_host.a"
for two different reasons. The main purpose is to build the vboot_reference
tools found in the utility/ directory. But there are some external userspace
programs that would also like to use some functions in this library.
This change establishes libvboot_host.a as the library for use by external
userspace programs only, and creates a new libvboot_util.a library that's
only used inside this source tree to build the vboot utilities.
BUG=chromium:231567
BRANCH=ToT
TEST=manual
Build and run the local tests:
make runalltests
make clean
Build Link firmware and all the utilities:
emerge-link chromeos-base/vboot_reference \
sys-boot/depthcharge \
sys-boot/coreboot \
chromeos-base/chromeos-ec \
chromeos-base/chromeos-firmware-link \
chromeos-base/chromeos-cryptohome \
chromeos-base/update_engine \
chromeos-base/chromeos-installer \
chromeos-base/chromeos-login \
chromeos-base/verity
Build Lumpy utilities, which include the 32-bit cros_installer:
emerge-lumpy chromeos-base/vboot_reference \
chromeos-base/chromeos-login \
chromeos-base/verity \
chromeos-base/update_engine \
chromeos-base/chromeos-installer \
chromeos-base/chromeos-cryptohome
Change-Id: Ie81ff1f74a6356cb8fab7d98471139d7758c4f19
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207016
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We use a few bytes of battery-backed nvram to save some flags across
reboots. However if the battery discharges completely, these flags are lost.
There aren't any security issues with that since they reset to safe values,
but some of the flags are used to configure how the system boots in
dev-mode.
If a dev-mode user has completely replaced ChromeOS with some other OS, then
she often needs to set the dev_boot_usb and/or dev_boot_legacy flags as well
in order to boot it using Ctrl-U or Ctrl-L. If the battery dies, then those
flags are cleared, and the only way to make the Chromebook boot again is by
going through recovery, which wipes the disk.
This change uses a new NV space in the TPM to back up some of the nvram
flags. These nvram fields will be backed up:
block_devmode
dev_boot_legacy
dev_boot_signed_only
dev_boot_usb
fwupdate_tries
loc_idx
Because writing to the TPM space is slow and limited to an unspecified but
finite number of cycles, we only back up the fields when specifically
requested by the new backup_nvram_request flag. This flag will be set by
crossystem whenever it is used to change any of the fields listed above. The
backup will be attempted at the NEXT boot (because the TPM is locked after
booting), and the backup_nvram_request flag will be cleared if the backup
was successfull.
Note that this CL is for Top of Trunk only. The firmware will create the
required TPM spaces on systems that have never been booted, but we don't yet
have a secure or reliable method to update existing systems.
FYI, on Link, determining that the TPM's backup NV space doesn't exist adds
about 6ms to the boot time. If it does exist, the backup_nvram_request flag
is cleared automatically so it won't check until it's set again.
BUG=chromium:362105
BRANCH=ToT (only!)
TEST=manual
Testing this is a long and involved process. Read on...
First, there are host-side tests for it. In the chroot:
cd src/platform/ec
make runtests
Second, to test on a completely NEW system that was first booted with a BIOS
that contains this CL, do this:
Enter dev-mode
Use crossystem to set values for the fields listed above
Confirm that "backup_nvram_request" is set to 1
Reboot
Use crossystem to confirm that "backup_nvram_request" is now 0
Remove the battery and the AC
Reattach either battery or AC so it will boot again
Use crossystem to confirm that the backed up fields are still good, while
the others have been reset to default values
Switch to normal mode
Remove the battery and the AC
Reattach either battery or AC so it will boot again
Look at the bios info in chrome://system to see what crossystem says
Confirm that the dev_boot_* flags are all 0, while the others are restored
Third, to set things up to test this on an existing system (I used Link),
you have update the BIOS, delete both the Kernel and Firmware NV spaces in
the TPM, then reboot so that the BIOS will create the Backup, Kernel, and
Firmware spaces. It will only do that if they're all missing.
Open it up, disable write-protect, attach a servo, etc.
Switch to dev-mode, log in.
Run make_dev_firmware.sh
Reboot in recovery mode, and insert a USB stick with a test image on it.
NOTE: In order to fiddle with the TPM, we'll *always* have to boot in
recovery mode, since that's the only time the TPM is left unlocked. That's
NOT the same as pressing Ctrl-U at the scary boot screen. The rest of
these steps assume you've booted in recovery mode and are running from the
test image on the USB stick.
Run
make_dev_ssd.sh --remove_rootfs_verification --recovery_key
Reboot (recovery mode)
Run
mv /etc/init/tcsd.conf /etc/init/tcsd.conf.disabled
Reboot (recovery mode).
Run "tpmc getvf". It should say
deactivated 0
disableForceClear 0
physicalPresence 1
physicalPresenceLock 0
bGlobalLock 0
Run "tpmc geto". It should say
Owned: no
Now you'll need to build the "tpm-nvtool" utility. In the chroot:
cd src/third_party/tpm/nvtool
make
Copy that to the DUT, in /usr/local/bin.
Now run
tcsd
tpm-nvtool --list | grep Index
You may see a number of spaces, but you should at least see these:
# NV Index 0x00001007
# NV Index 0x00001008
Run
tpm_takeownership
It will prompt you for two passwords (and confirm each one). Respond with
something you can remember like "google".
Run
tpm-nvtool --release --index 0x1007 --owner_password "google"
tpm-nvtool --release --index 0x1008 --owner_password "google"
Verify that it worked with
tpm-nvtool --list | grep Index
Power off.
Using servo, flash the new BIOS that has this CL in it.
Power on, normally this time (not recovery mode). If all goes well, it
should create the correct NV spaces and boot into the SSD. Copy tpm-nvtool
into this image too, and run
tpm-nvtool --list | grep Index
You should now see at least these spaces:
# NV Index 0x00001007
# NV Index 0x00001008
# NV Index 0x00001009
Now you're ready to test the backup/recover feature.
Change-Id: I00031fa0774720147327e2ae0f37e26b34b86341
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202138
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
This just adds a one-byte field in the nvstorage region for use in debugging
hard-to-catch errors. There's no official meaning or expectation for this
field. It's just a handy place to emit some information.
BUG=chrome-os-partner:11534
BRANCH=parrot
TEST=manual
Just change the value and ensure that it persists across a (working) reboot.
It's only updated at specific points under very exacting error conditions,
so all we really want to test is that it works as a place to store some
extra info.
crossystem recovery_subcode
crossystem recovery_subcode=14
reboot
crossystem recovery_subcode
The recovery_subcode byte is at index [6] of the VbNv.raw bytes that appear
when you press TAB, so you can find it there too:
VbNv.raw: 60 20 00 00 00 00 0e 00 00 00 00 00 00 00 00 65
Decimal 14 == 0x0e
Change-Id: I1930b8f81a03ab838dbee99a8d72c35a444efdfd
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/39803
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This option is disabled per default and can be enabled with
crossystem dev_boot_legacy=1
or by setting the GBB flag
GBB_FLAG_FORCE_DEV_BOOT_LEGACY 0x00000080
BUG=chrome-os-partner:6108
TEST=crossystem dev_boot_legacy=1
boot to dev mode screen, press CTRL-L, see SeaBIOS start
(other CLs needed)
BRANCH=link
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I593d2be7cff5ca07b8d08012c4514a172bd75a38
Reviewed-on: https://gerrit.chromium.org/gerrit/31265
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
This adds two new flags to crossystem:
clear_tpm_owner_request
clear_tpm_owner_done
The first one requests that the firmware clear the TPM owner on the
next boot. When the firmware does this, it will set
clear_tpm_owner_request=0, and set clear_tpm_owner_done=1. The OS can
use the done-flag as a hint that trusted things guarded by the TPM are
no longer trustable.
BUG=chromium-os:31974
TEST=manual
crossystem
// both flags initially 0
crossystem clear_tpm_owner_request=1
crossystem clear_tpm_owner_done=1
// request=1, done=0; done can be cleared but not set by crossystem
reboot
tpmc getownership
// owned=no
crossystem
// request=0, done=1
crossystem clear_tpm_owner_done=0
crossystem
// both flags 0 again
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I49f83f3c39c3efc3945116c51a241d255c2e42cd
Reviewed-on: https://gerrit.chromium.org/gerrit/25646
For fastest boot, we don't want to load the VGA Option ROM every time, but
only when we need it. Coreboot does that loading, but it can't always know
when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're
in dev-mode or not). By the time we get to U-Boot, it's too late, so we need
two extra bits - one for vboot to tell coreboot to load the Option ROM and
another for coreboot to let vboot know it's been done.
BUG=chrome-os-partner:8789
TEST=manual
The only visible change is that crossystem will now have an "oprom_needed"
flag that can be set or cleared. Nothing actually pays attention to it yet,
though.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I521a6afdfb8ea17a8148b32eeb858844c981de9c
Reviewed-on: https://gerrit.chromium.org/gerrit/26272
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Confirmed via codesearch that these fields are not used outside of
vboot_reference itself, and the only use inside vboot_reference is one
test which checked that the test error generation itself worked.
BUG=chromium-os:31668
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Ic393e126ca2853f7aaff19ffd6fcdbdb1c47689f
Reviewed-on: https://gerrit.chromium.org/gerrit/24895
Reviewed-by: Simon Glass <sjg@chromium.org>
BUG=chrome-os-partner:9707
TEST=manual
make
make runtests
You can also test it by clearing the TPM, then manually looking at the TPM
regions. In dev-mode, clear the regions and you'll see something like this:
localhost ~ # tpmc read 1007 a
1 0 0 0 0 0 0 0 0 0
localhost ~ # tpmc read 1008 d
1 4c 57 52 47 0 0 0 0 0 0 0 0
localhost ~ #
Go back to normal mode and reboot, and you'll see something like this:
localhost ~ # tpmc read 1007 a
2 0 1 0 1 0 0 0 0 4f
localhost ~ # tpmc read 1008 d
2 4c 57 52 47 1 0 1 0 0 0 0 55
localhost ~ #
The important things are that the first number is now 2, instead of 1, and
the last number is not zero (it's a checksum, so it'll vary depending on the
other numbers, which will themselves vary according to the firmware and
kernel versions).
Change-Id: Ia4040311c2a4b2819792549b883377c8b6b89d48
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/22856
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When you enter dev-mode,
Pressing Ctrl-U to boot from USB is DISABLED.
Booting any self-signed kernel from the SSD is ENABLED.
This replaces the "crossystem dev_boot_custom" argument with
"crossystem dev_boot_signed_only", which has the opposite polarity.
So if you want to dev-mode to only boot official kernels, you have to
explictly set it that way. If you leave dev-mode and then come back,
it will go back to the conditions shown above.
BUG=chrome-os-partner:5954
TEST=manual
Just run the factory flow. It was broken; this should fix it (except for any
workarounds that were added while it was broken; those may need to be
reverted).
Change-Id: I13e0edbc0e77c5d6ea609dabf771085006cd1805
Reviewed-on: https://gerrit.chromium.org/gerrit/11853
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Although we're now using a single unified BIOS, it is pretty nice to be able
to get a shell in developer mode while still using verified boot for the
kernel and filesystem. Alex & ZGB implemented this by requiring the dev-mode
user to install a special dev-mode BIOS. We don't do that, but we DO require
setting a special flag with "crossystem" to accomplish the same thing.
In order to allow booting a self-signed kernel, you must boot in developer
mode, open a shell, and run this:
crossystem dev_boot_custom=1
Special note to internal developers: If you're in the habit (as I am) of
booting directly from a USB stick in dev-mode, you'll have to run this:
crossystem dev_boot_custom=1 dev_boot_usb=1
Just using dev_boot_usb=1 is no longer enough, because the USB kernel is
signed using the recovery key and by pressing Ctrl-U, we validate it with
the kernel data key. That worked before this change because any self-signed
kernel was fine, and that's how the USB key was treated. Now it actually
requires a verified signature until you enable dev_boot_custom=1 also.
BUG=chrome-os-partner:5954
TEST=manual
Boot once in normal mode, which clears the special flags. Then switch to
developer mode. You should be able to boot and get a root shell.
Run
crossystem dev_boot_usb=1
Obtain a USB recovery image that's keyed differently. For example, if you're
testing with dev-keys, use a PVT-signed image or vice-versa.
Reboot into dev-mode with the USB recovery stick inserted. At the dev-mode
screen, press Ctrl-U. You should hear a single beep, but it should not boot.
Press Ctrl-D to boot from the hard drive, log in to a shell and run
crossystem dev_boot_custom=1
Repeat the previous test. This time when you press Ctrl-U, it should boot
the recovery image. Turn the system off before it does anything.
That's it.
Change-Id: I1811ee9a188974b3f94c83c52b00b60028b86c69
Reviewed-on: https://gerrit.chromium.org/gerrit/11442
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chromium-os:17433
TEST=make && make runtests. Additional manual tests:
0. Insert a valid dev-signed USB key.
1. Boot with dev switch off.
`crossystem dev_boot_usb` should print 0.
2. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Ctrl+U at dev screen should beep, but not boot USB.
3. Type `crossystem dev_boot_usb=1`. Should succeed.
`crossystem dev_boot_usb` should print 1.
4. Reboot system.
At the dev mode warning, press Ctrl+U
System should boot from USB key
`crossystem dev_boot_usb` should print 0.
5. Flip dev switch off.
`crossystem dev_boot_usb` should print 0.
6. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Note that this does not apply to Cr-48, Alex, or ZGB.
Change-Id: Idf85fdd642f38f531c89e5fa5b1679e84936d4da
Reviewed-on: http://gerrit.chromium.org/gerrit/3875
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I5ed3509a9d4e578cd2e98f493dab59bc2fbd5827
R=dlaurie@chromium.org
BUG=chrome-os-partner:2748
TEST=manual
crossystem fwb_tries=3
(reboot)
crossystem tried_fwb
(should print 1)
crossystem fwb_tries=0
(reboot)
crossystem tried_fwb
(should print 0)
In dev mode...
Boot a kernel signed with the same key as in the firmware
crossystem kernkey_vfy
(should print sig)
Boot a kernel signed with a different key than the firmware
crossystem kernkey_vfy
(should print hash)
Review URL: http://codereview.chromium.org/6711045
Fix try_b processing
And move key block flags check up in LoadFirmware(), which speeds up
boot when the dev switch is off because it doesn't do a signature
check and then throw it out.
BUG=12282
TEST=build firmware, try by hand
Review URL: http://codereview.chromium.org/6596081
Change-Id: I10474e9e0ae324906dfe02a351347d04ce847f67
1) Did firmware attempt RW slot B before slot A?
2) Did firmware check the kernel keyblock signature, or just its hash?
Added crossystem support as well.
BUG=chrome-os-partner:1657
TEST=make && make runtests
Review URL: http://codereview.chromium.org/6597011
Change-Id: I0d743ae87cedd938ba988170793717d3fdbd8ce9
