This CL builds upon earlier firmware and kernel changes (see CLs
related to the same bug, chromium-os:12522).
ARM firmware now simulates both Nvram storage and VDAT buffer, the
structures the x86 version uses extensively to communicate back and
forth between firmware/kernel/userland.
So, to make crossystem work on arm, all what's needed is to provide
architecture specific interface to Nvram and VDAT simulation, and
architecture specific processing for variables which are accessed on
ARM platforms in a different way.
The few discrepancies and platform specifics which had to be addressed
for ARM specifically are as follows:
- the Nvram contents are cached in the shared memory and available for
reading as part of /sys/kernel/debug/chromeos_arm. When writing
Nvram, the same file needs to be written, but only the 16 bytes
(representing the Nvram contents) are aacepted.
- the VDAT buffer also comes from the shared memory (as part of the
same sysfs file)
- when crossystem starts, it needs to read in this shared memory
contents, a` weak' function VbArchInit() is being added such that it
is provided on ARM platforms only, on x86 an empty stub is called.
- current developer/recovery request/ro firmware switch states are
retrieved through GPIO drivers. The GPIO numbers are defined in the
file, the GPIO driver is supposed to be configured before
crsossystem can operate.
- the BINF values are supplied through an array within shared memory,
it would be easy to refactor both x86 and ARM use the same code to
process BINF values, but with this submission the code is duplicated
to minimize x86 impact.
- the following crossystem variables do not have ARM equivalents,
thier values are reported as '(error)':
recoverysw_ec_boot
savedmem_base
savedmem_size
BUG=chromium-os:12522
TEST=manual:
. bring up a kaen system
. execute the following script to enable the appropriate GPIOSs:
for gpio in 56 59 168; do echo $gpio > /sys/class/gpio/export; done
. run `crossystem' and observe reasonable output values
. to verify that it reads GPIOs properly, try
echo $(./crossystem recoverysw_cur)
with the miniservo 'GOOG_REC' button pressed and released, observe
different readings (note that the state of the button is reversed,
the released button is reported as '1')
. to verify the write capabilities, note that the nvram contents can
be accessed using the following shell commands
echo 3 > /proc/sys/vm/drop_caches
2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && \
od -t x1 /tmp/blk | head -1
(the first command cause the device cache dropped, and the second
command accesses the device contents.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
localhost var # echo $(./crossystem fwb_tries)
10
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 0a 00 be 00 00 00 00 00 00 00 02 00 00 00 a2
localhost var # ./crossystem fwb_tries=9
localhost var # echo $(./crossystem fwb_tries)
9
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 09 00 be 00 00 00 00 00 00 00 02 00 00 00 8a
localhost var #
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Change-Id: Ie4c6ff44441d98a42b1057953208fdb90c08f46d
Reviewed-on: http://gerrit.chromium.org/gerrit/113
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
A convenient value that firmware to identity the blank screen.
TEST=emerge-tegra2_seaboard vboot_reference-firmware successfully
BUG=chromium-os:1305
Change-Id: Ib38f0c5ba571e95c966ae58c81d22487e416e666
R=clchious@chromium.org
Review URL: http://codereview.chromium.org/6712029
Change-Id: I5ed3509a9d4e578cd2e98f493dab59bc2fbd5827
R=dlaurie@chromium.org
BUG=chrome-os-partner:2748
TEST=manual
crossystem fwb_tries=3
(reboot)
crossystem tried_fwb
(should print 1)
crossystem fwb_tries=0
(reboot)
crossystem tried_fwb
(should print 0)
In dev mode...
Boot a kernel signed with the same key as in the firmware
crossystem kernkey_vfy
(should print sig)
Boot a kernel signed with a different key than the firmware
crossystem kernkey_vfy
(should print hash)
Review URL: http://codereview.chromium.org/6711045
R=reinauer@chromium.org
BUG=chrome-os-partner:2578
TEST=manual
crossystem vdat_timers
should show 'LFS=0,0 LF=number1,number2 LK=number3,number4'
where number1 < number2 < number3 < number4
crossystem vdat_lfdebug
run from a dev mode console, should show
'check=12,0 index=0x00 tpmver=(hex number) lowestver=(hex number)'
crossystem vdat_flags
run from a dev mode console, flags should be 0x04.
Review URL: http://codereview.chromium.org/6685068
Change-Id: Id7b958ae300d10cdcdc1b17a1bb17b7e5069166f
Change-Id: I8d52765227fd3355431bebc77dfbe0106c889eca
BUG=chrome-os-partner:2748
TEST=compiles; will be porting to H2C next
Review URL: http://codereview.chromium.org/6672068
Change-Id: Ib147be7442b93ef429a9796e2b76bee27347e0b3
R=adlr@chromium.org
BUG=13150
TEST=manual
On a current firmware (0052G1+), use 'crossystem vbtest_errfunc=3
vbtest_errno=3' to force a reboot to recovery mode. Then use
'crossystem recovery_reason' to check the recovery reason.
It should be 71. It's not. (You'll get a range of other error reasons
due to a different firmware bug.)
Review URL: http://codereview.chromium.org/6670040
I re-factored the extend call into its own module, since it doesn't necessarily
need to be couple with rollbackfirmwaresetup.
BUG=chrome-os-partner:2372
TEST=Tried emerge-x86-generic and emerge-arm-generic vboot_reference.
Change-Id: I0d3115b10b686133e63e304570325ebdbd50ae3a
Review URL: http://codereview.chromium.org/6696006
Change-Id: I976c11c82c3d665a4feb88226e919f16c2440f60
BUG=chrome-os-partner:1657
TEST=manual - see below
make && make runtests
Then test verifying a test image in both dev mode (-b1, no key specified) and recovery mode (key specified)
build/utility/load_kernel_test -b1 ~/b/USB_images/0.11.224.0-alex/chromiumos_test_image.bin
build/utility/load_kernel_test ~/b/USB_images/0.11.224.0-alex/chromiumos_test_image.bin tests/devkeys/recovery_key.vbpubk
And make sure the firmware with this change actually boots to USB and SSD.
NOTE: u-boot-next needs to change to work with this change. will attempt a follow-up CL with that change
Review URL: http://codereview.chromium.org/6626045
(somehow that never got committed)
Change-Id: I304e594066c5dd72fc7cf37d31e27b1096ae1a38
BUG=12282
TEST=make && make runtests
Review URL: http://codereview.chromium.org/6610019
Fix try_b processing
And move key block flags check up in LoadFirmware(), which speeds up
boot when the dev switch is off because it doesn't do a signature
check and then throw it out.
BUG=12282
TEST=build firmware, try by hand
Review URL: http://codereview.chromium.org/6596081
Change-Id: I10474e9e0ae324906dfe02a351347d04ce847f67
Change-Id: I19f402904978581eb5ca990ffbdf2f762b48c217
BUG=12282
TEST=make H2C firmware and verify using crossystem utility
(set fwb_tries, reboot, verify that mainfw_act is B)
Review URL: http://codereview.chromium.org/6597018
1) Did firmware attempt RW slot B before slot A?
2) Did firmware check the kernel keyblock signature, or just its hash?
Added crossystem support as well.
BUG=chrome-os-partner:1657
TEST=make && make runtests
Review URL: http://codereview.chromium.org/6597011
Change-Id: I0d743ae87cedd938ba988170793717d3fdbd8ce9
In order to run test cases in both Linux user mode and u-boot command
mode. The API header tlcl.h must be accessed by both ebuilds.
Change-Id: Ic027dc118f26666b88bf54c511e2455a55e4eb8f
BUG=chromium-os:10497
TEST=emerge vboot_reference-firmware successfully
Review URL: http://codereview.chromium.org/6469089
LZMA has better compression ratio and is also supported in u-boot already.
ARM BIOS will use LZMA to compress BMP files.
BUG=chromium-os:11017
TEST=manual
$ make
$ make runbmptests
Change-Id: I6b791e3284b65eb3085b0de548bd241eab2ee598
Review URL: http://codereview.chromium.org/6523019
Works for getting switch positions, hwid, fwid.
BUG=chrome-os-partner:1940
TEST=ran manually on Mario and Alex
Review URL: http://codereview.chromium.org/6413002
Change-Id: I874df3b5adf872fec2d36e574cb4b8b4a72d331c
This replaces http://codereview.chromium.org/6307007. The only difference is
the Makefile. The vboot_reference ebuild has been changed so that we only
attempt to build bmpblk_utility on the host.
Change-Id: I4902703baba155e0d2d7646d19b233aa695c282f
BUG=chromium-os:11017,chromium-os:10599
TEST=none
No test needed. If buildbot is green, it's verified.
Review URL: http://codereview.chromium.org/6334111
Revert "This change define the data structure of bmp block and implements the create more of bmpblk_utility. It reads a YAML config file, parse the informations, and creates bmpblock file as output."
This reverts commit 95b0ae01ea.
BUG=none
TEST=emerge-x86 vboot_reference
TBR=waihong@chromium.org
Change-Id: If1692ca12ddb61b7814ca7dddccee5a395c8bed1
The list mode and extract mode will be implemented later.
Change-Id: I2b34b323814b1d6b0a369b0e4b2bfa7cf960ff4a
BUG=chromium-os:11017
TEST=build and run, use bvi to check its output.
Review URL: http://codereview.chromium.org/6307007
