Allow the host to self-report its sleep state through
EC_CMD_HOST_SLEEP_EVENT, which will typically be sent with SUSPEND
param when the host begins its sleep process. While the host has
self-reported that it is in SUSPEND, don't assert the interrupt
line, except for designated wake events.
BUG=chrome-os-partner:56156
BRANCH=None
TEST=On kevin, run 'ectool hostsleepstate suspend', verify that
interrupt assertion is skipped for battery host event. Run 'ectool
hostsleepstate resume' and verify interrupt is again asserted by the
battery host event.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I74288465587ccf7185cec717f7c1810602361b8c
Reviewed-on: https://chromium-review.googlesource.com/368391
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Moved link layer-specific constants into link layer .h file.
Renamed data channel function to better represent its function.
TEST=make BOARD=hadoken
BUG=None
BRANCH=None
Change-Id: I239d535cf3725bf003443fc211fc802bc8aee13f
Signed-off-by: Levi Oliver <levio@google.com>
Reviewed-on: https://chromium-review.googlesource.com/367805
Commit-Ready: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Re-wrote ble_radio_init to work with both data and
advertising packets. Updated all calls to refactored function.
RADIO_PCNF0_ADV renamed because it applies to advertisement and
data packet formats. Updated all references to this value.
TEST=make BOARD=hadoken
BUG=None
BRANCH=None
Change-Id: I0fdbe0eb146ce5cbc40e3ac67bf4d0e5465dcc2f
Signed-off-by: Levi Oliver <levio@google.com>
Reviewed-on: https://chromium-review.googlesource.com/367732
Commit-Ready: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Add espi driver for x86-based platform which support espi interface such
as skylake and so on.
Added source:
1. espi.c: Add drivers which supports the utilities of peripheral and
virtual-wire channels so far.
2. espi.h: Add espi virtual-wire declaration for power sequence FW.
Modified sources:
1. lpc.c: Add interrupts and initialization steps for espi.
2. gpio.c: Add interrupt handler of espi reset.
BRANCH=none
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
Change-Id: Ie80afe79d85aba47fc0b72898a8374c2898ec114
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/366181
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If an HPD IRQ event is seen, make note of it and keep the status set
until informing the host.
BUG=chrome-os-partner:55925
BRANCH=None
TEST=Manual on kevin, trigger HPD event, verify that event bit is set in
reply to first host command and not subsequent host commands.
Change-Id: I0900a683dcb344d5d4d03a1fa6e3d8de913597b2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366990
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Sometimes a perfectly sane image enters rolling reboot mode in case
some data change triggered a bug which prevents the normal startup and
causes a reset.
The most likely task causing in in case of cr50 would be the tpm task.
Let's add another check of the restart counter: should it reach the
value of 50, do not start the TPM task.
BRANCH=none
BUG=chrome-os-partner:55708
TEST=with this code plus an unaligned access introduced in tpm
initialization sequence in both RW_A and RW_B, program the full
image on the dev board.
Observe the device reset 50 time is rapid succession and then
stop with the following message on the console:
Bldr |511709
retry|50
Himg =4F992103..408D193E
Hfss =384E4655..EE13EBD0
Hinf =44D21600..B70529BD
jump @00044000
--- UART initialized after reboot ---
[Reset cause: rtc-alarm]
[Image: RW, cr50_v1.1.5044-8d6f7a2+ private-cr51:v0.0.68-633229c ...
+ cryptoc:v0.0.4-5319e83 2016-08-07 19:37:16 vbendeb@kvasha]
[0.004130 Inits done]
[0.006919 Active NVram partition set to 0]
Console is enabled; type HELP for help.
> system_rolling_reboot_suspected: roling reboots suspected. Try \
powercycling to clear
this condition.
[0.010502 Task 2 (TPM) exited!]
Change-Id: I6b08c5c1a02da9edf9bdf394e57cc56d2e595ad1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366892
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The nvmem space defined in the ec code base for the cr50 board is used
by the TPM2 library, which has its own nvram size definition. The two
definitions must match.
On top of the fact that the definitions are not locked to each other,
there is a third completely unrelated nvram size definition in
board/cr50/board.c.
This patch unifies nvmem size definitions between cr50 and tpm2
repositories by adding a compile time check for the size to be the
same on both sides.
Also, it turns out that two certificates (RSA and ECC) together do not
quite fit into the cr50 TPM nvram. Hence the total allocated nvmem
space is being increased to 20K (note that the actual nvram size
available to the TPM is less than half of this).
BRANCH=none
BUG=chrome-os-partner:55898
TEST=tpm does not lock up any more when 'tpm_client --own' is ran on the
Kevin-tpm2 command line
CQ-DEPEND=CL:367010
Change-Id: I20b4f54118bd2fa12e5bd5741d6c58fbe91f65d1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366796
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Servo_micro sets usb config maxpower to 100mA.
Servo_v4 is set to self powered as it's powered by a
shared vbus and not be the bub it's connected to.
cr50 is self powered as no power is transmitted as part of CCD.
* Add CONFIG_USB_MAXPOWER_MA to define USB maximum power draw requested
per board.
* Add CONFIG_USB_SELF_POWERED to indicate that a device is not
powered by allocated USB power.
BUG=chromium:631302
TEST=lsusb reports 100mA bMaxPower (micro), Self powered (v4)
BRANCH=None
Change-Id: I79b8ce46f32d94f16104a4a8080104e30dce7f2c
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/363153
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a case statement to handle HCI commands.
Add a test commands.
Try to match the hcitool syntax, so the same commands
can be executed on a Linux host.
Added lcmd (long cmd) to pass more parameters in fewer arguments
BUG=None
BRANCH=None
TEST=Use HCI commands to configure an advertiser and listen for
it using `hcitool lescan` on the host.
Change-Id: Ie28038847c9549eb1c27a605aa0fbad5efd3b2c7
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362145
Commit-Ready: Dan Shi <dshi@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
I keep thinking this refers to "Embedded Controller" instead of
"Elliptic Curve Cryptography". Make it clearer.
There's no functional change, I'm just renaming a constant.
BUG=none
BRANCH=none
TEST=make buildall; run tests on Cr50 dev board
make -C test/tpm_test && sudo ./test/tpm_test/tpmtest.py
Change-Id: Iaf2e2839e88fdbbcb1a712934be56a0dd47e4a70
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366752
Reviewed-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
There are few reasons why the SoC may reboot which we haven't
been reporting (they just show up as "[Reset cause: other]").
This adds a bit of decoding to explain some of those "other"
reasons.
BUG=none
BRANCH=none
TEST=make buildall; try on Cr50
I tested one of the new reasons using "crash hang". It shows up
correctly as "{Reset cause: security]". I haven't specifically
tested all of the new reasons, but since this is basically just a
change to console message they should work too. I'll double-check
those cases once some blocking bugs are fixed.
Change-Id: I46daed29d7e37bda9034a3486127bed0ea25f803
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366400
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reef doesn't have the battery temperature sense pin connected to
the charger, hence reading the battery temperature from the battery
registers.
BUG=chrome-os-partner:55834
BRANCH=none
TEST=Using 'battery' & 'temps' console command verified,
temperature readings are same from both the commands.
Change-Id: I897e453296151f31344f3e0434202baa67c7025d
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/365970
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
There is just one version of Cr50 firmware for all boards
that it's used on. However, on some boards the AP communicates
to the TPM via a SPI interface (i.e. Kevin) and on others, the
AP communicates via an I2C interface (i.e. Reef). In order to
dynamically discover which interface to configure, there are
strapping resistors added to the board which enables the Cr50
to detect which configuration to implement.
This CL is a first pass and is only looking at DIOA1 which is
pulled high for SPI and pulled low for I2C configurations.
The strapping resistor should be read when the AP is in reset
prior to it attempting to drive any of the lines used for
strapping. To ensure this condition is met, Cr50 will only
check the strapping options following a POR (power on reset).
Once the configuration type is discovered, a 'long_life'
register is used to hold the result so that the result can
always be available. The long_life register contents remain
unchanged until a subsequent power down event.
BRANCH=none
BUG=chrome-os-partner:50728
TEST=manual
Tested on Kevin and Reef. Verfifed by reading the stored value
that the SPI configuraiton is detected for Kevin and the I2C
interface is detected on Reef. In addition, verified on Kevin
that the Cr50 FW version is correctly reported to the AP which
means that TPM register reads via the slave SPI are functioning.
Change-Id: Ibd7624ad8e3b4126f6346dce0bc72f62a3cc6d18
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/363014
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
As a temp measure until a proper solution is implemented, reset the
restart counter when the PCR_Read command is issued by the host.
This is a good indication that Chrome OS is through the boot process,
as PCR value is used to determine the boot mode.
BRANCH=none
BUG=chrome-os-partner:55667
TEST=installed the new image on a Kevin cr50 and rebooted it in normal
and recovery modes, observed on the cr50 console the message like
> system_process_retry_counter:retry counter 1
Change-Id: Ib55e161d5edbf8f6e2d387fd756b94aa53c20ed8
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/364311
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
'+' flag can be used with signed integer type (%d) and causes positive
integers to be prefixed with '+' (e.g. +1745). This emphasizes output
values as a signed value. It can be mixed with left-justification flag
'-': %-+8d. It's ignored when used with unsigned integer or non-integer
types: %u, %x, %p, %s, %c, etc.
BUG=none
BRANCH=none
TEST=make buildall &&
int32_t d = 1745;
CPRINTS("'%-+8d'", -d); /* '-1745 ' */
CPRINTS("'%-+8d'", d); /* '+1745 ' */
CPRINTS("'%d'", d); /* '1745' */
CPRINTS("'%+08d'", -d); /* '000-1745' */
CPRINTS("'%+08d'", d); /* '000+1745' */
CPRINTS("'%+d'", -d); /* '-1745' */
CPRINTS("'%+d'", d); /* '+1745' */
CPRINTS("'%+s'", "foo"); /* 'foo' */
CPRINTS("'%-+8s'", "foo"); /* 'foo ' */
CPRINTS("'%+08x'", d); /* '000006d1' */
CPRINTS("'%+u'", d); /* '1745' */
Change-Id: I8dcd34b0cf03dbefc500b9c98fea235d85bde8d3
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/363924
When the case close debug (CCD) feature is provided by an external chip
(e.g security chip or TCPC), we still need to be able to detect debug
accessory with Rd/Rd (by setting Rp/Rp when VBUS is detected without
seeing Rp).
Add a CONFIG_CASE_CLOSED_DEBUG_EXTERNAL configuration parameter for this
case.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:55410
TEST=manual:on Kevin, enable CONFIG_CASE_CLOSED_DEBUG_EXTERNAL,
plug a SuzyQ (with Rd/Rd) and verify that the device in debug mode
when transitioning to S5.
Change-Id: Ie04a000a7b0eb670e3808f7bca1180298dfcd9db
Reviewed-on: https://chromium-review.googlesource.com/363400
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The SoC looks for two RO images at reset, and is typically
configured for two RW images as well. This CL reports version
strings for all those images, as well as identifying the active
RO and RW copies.
Since the RO image doesn't contain a version string, we create
one using the epoch_, major_, minor_, and img_chk_ members of its
signed header.
BUG=chrome-os-partner:55558
BRANCH=none
TEST=make buildall; run on Cr50 hardware
The "version" command now includes information like this:
RO_A: * 0.0.2/a3c3d5ea
RO_B: 0.0.2/8895c9eb
RW_A: cr50_v1.1.4965-a6c1c73-dirty
RW_B: * cr50_v1.1.4959-2f49d5c
The '*' indicates the active image.
The test/tpm_test/tpmtest.py program has been updated to request
the version information at startup, and it also now reports
similar information, just all on one line:
RO_A:* 0.0.2/a3c3d5ea RO_B: 0.0.2/8895c9eb RW_A: cr50_v1.1 ...
The active images are marked with a '*' following the ':', so
that the same regexp can match either format:
($ro, $rw) = m/RO_[AB]:\s*\*\s+(\S+).*RW_[AB]:\s*\*\s+(\S+)/s;
Change-Id: Ic27e295d9122045b2ec5a638933924b65ecc8e43
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362861
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This change implements logic for installing
endorsement certificates in the RW section.
The endorsement certificates are initially
provisioned in a fixed RO flash region and
are copied in the RW TPM data region (once
this region has been initialized).
Also add code for reading from the info bank,
which is where the endorsement seed is
initially stored.
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
BUG=chrome-os-partner:50115
TEST=TCG tests running
Change-Id: Id8c16d399202eee4ac0c4e397bdd29641ff9d2f3
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/362402
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
The clock() function was introduced to provide free running clock for
the TPM2 library, which expects this clock to run with a millisecond
resolution.
This patch fixes the bug where the function in fact was returning the
clock running at a microsecond resolution.
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
BUG=chrome-os-partner:50115
TEST=with the appropriate modification of the user of this function
all lockout related TCG tests pass.
Signed-off-by: nagendra modadugu <ngm@google.com>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/361180
(cherry picked from commit b4e78b309900402499b8742199fb4536570d3000)
(cherry picked from commit fefaa02a4f2c807a3ad50137bd7dba7f5f081c31)
Change-Id: Ic02fffca610426d22e58609eb8c3693aec96ad5c
Reviewed-on: https://chromium-review.googlesource.com/362118
For now the presence of both RSA and EC certificates at fixed NVRAM
indices is considered evidence of TPM being through manufacturing.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied TPM manufacturing status is
properly detected at startup.
Change-Id: Iff3861603272cdfb58ebc523458c114685b2429f
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362351
Reviewed-by: Marius Schilder <mschilder@chromium.org>
This copies the generic USB update code into common
so it can be used on other platforms. There should be
no functional change. cr50 folks want no change to their
code so vbendeb@chomium.org will refactor this back
together at a later date.
BUG=chromium:571476
TEST=none
BRANCH=none
Change-Id: I710afb22940013e7db5d8694898b90c0ae245777
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362131
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
This allows us to specify the polarity of the alert signal for
each TCPC chip onboard, even if we have multiple instances of
the same chip.
BUG=none
BRANCH=none
TEST=built and booted on reef
Change-Id: I06a58c4e26892843243e8e98f2c86c6d3a696eb1
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360948
Reviewed-by: Shawn N <shawnn@chromium.org>
Currently, the matrix keyboard protocol does not have support for
handling non-matrixed keys. This commit adds support for buttons which
do not appear in the keyboard matrix as well as switches.
Additionally, the keyboard FIFO is now just a general MKBP events FIFO
which MKBP events are free to use. Now, buttons and switches wil join
the key matrix event.
BUG=chrome-os-partner:54988
BUG=chrome-os-partner:54976
BUG=chromium:626863
BRANCH=None
TEST=Flash kevin, and verify that keyboard is still functional.
TEST=make -j buildall
CQ-DEPEND=CL:358926
Change-Id: If4ada904cbd5d77823a0710d4671484b198c9d91
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/358633
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When the debug cable is disconnected the a USB suspend interrupt is
triggered and puts the chip to sleep before rdd can detect a change on
the cc lines and disconnect from CCD. This prevents the DEBUG_STATE_MAP
from being reset to detect the debug connect and is left detecting the
disconnect. Since the debug accessory is already disconnected the RDD
interrupt will wake up the chip right after it goes to sleep.
The UTMI and PIN wake source still cause the chip to wake up before the
RDD interrupt, so disable those to test this change.
BUG=chrome-os-partner:54796
BRANCH=none
TEST=Disable wake pin and utmi wake sources. Put cr50 to sleep. Attach a
reworked suzy q and make sure cr50 wakes up. Detach it and check that it
goes back to sleep. Do that a couple of times. Check CCD is still
enabled when the debug accessory is detected and disabled on
disconnect.
Change-Id: I58a012895bc874dcdd512aa84de9a917469f3139
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360234
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Added code to get the VBUS level by reading the charger registers.
BUG=chrome-os-partner:55117
BRANCH=none
TEST=Manually tested on Amenia, VBUS_VAL (5Ch) & VCC_VAL (5Eh)
registers are updated with the correct VBUS value on the
respective ports.
Change-Id: I3b019b2d87e4c347f12596df387a2a659092ae25
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/359416
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
When cr50 is not trying to do ccd, we dont need to monitor the devices.
Disable device state detection interrupts and the AP and EC UARTs.
BUG=none
BRANCH=none
TEST=gru and kevin monitor devices correctly when ccd is enabled, and
dont monitor anything when it is disabled.
Change-Id: Ic3f5974320486ff6dd0147c490a1c294cc2f6a76
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356770
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
cts.tasklist contains tasks run only for CTS. These tasks are added to the
tasks registered in ec.tasklist with higher priority. This design allows
board directories to be free from CTS stuff.
cts.tasklist can be placed in each suite directory (cts/suite/cts.tasklist).
If a suite does not define its own cts.tasklist, the common list is used
(i.e. cts/cts.tasklist).
BUG=chromium:624520
BRANCH=none
TEST=Ran the followings:
make buildall
make CTS_MODULE=gpio BOARD=nucleo-f072rb
make CTS_MODULE=gpio BOARD=stm32l476g-eval
Change-Id: Ibb242297ee10a397a8fcb6ff73d8cbc560daa885
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359445
Reviewed-by: Chris Chen <twothreecc@google.com>
The first time you use this with a particular th,
connect only th and run ./cts.py --th
Then connect both boards and you can run
./cts.py to build/flash both boards.
BRANCH=None
BUG=None
TEST=manual
- Enter chroot
- Navigate to ec/cts
- Connect only th
- 'sudo ./cts.py --th'
- './cts.py -b'
- Exit chroot
- Connect both boards
- './cts.py -f'
Each board should flash successfully
Change-Id: Ib14fccabcd9fdad04f9b92817da597bc0dcb3d89
Reviewed-on: https://chromium-review.googlesource.com/358100
Commit-Ready: Chris Chen <twothreecc@google.com>
Tested-by: Chris Chen <twothreecc@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
If the EC has CONFIG_HOSTCMD_RTC set to 'y', then export this via the
features host command. The kernel can then use this feature to expose
an RTC device under /dev/rtc*.
Signed-off-by: Stephen Barber <smbarber@chromium.org>
BRANCH=none
BUG=chrome-os-partner:54639
TEST=`ectool inventory` shows RTC on kevin
Change-Id: I644c8e61c4d9f691cc6ca94ef60bee4384c21660
Reviewed-on: https://chromium-review.googlesource.com/359414
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
elm EC console output is very spammy, as EC_CMD_MOTION_SENSE_CMD
is called every 100ms, so we want to set "hcdebug" to "off" as
the default (which still includes errors, but no "normal"
commands).
BRANCH=none
BUG=chrome-os-partner:55001
TEST=make buildall -j
TEST=Flash elm EC, see that output is fairly quiet.
Change-Id: I70d91c291d934b4f032e5c57f3c333e2c10b93bc
Reviewed-on: https://chromium-review.googlesource.com/359112
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Currently, it is assumed the host will sooner or later retrieve the
events from the sensor ring: It is only used by Android and the sensor
HAL is enabling the ring buffer at boot.
But if nobody processes the ring, and the ring is almost full, the EC will
generate interrupt for every new events.
This can happen with ARC, where events generated for ChromeOS
will be in the ring but nobody will process them until Android is
started.
Add a command to allow sending ring MKBP events. It will be used when
the IIO ring buffer is enabled / disabled.
It also can be used for preventing raising interrupt when the device is
about to go to sleep.
BRANCH=ryu,cyan
BUG=b:25425420,b:27849483
TEST=Check with fiforead that no events are queued when IIO ring
buffer is disabled.
Check with ectool and androsensor that interrupt generation stops.
Change-Id: Ibc85eed2e0eae3a9ec07d191e692118bc2fd0dab
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356689
For certain board configurations, KSI2 will be stuck asserted for all
scan columns if the power button is held. We must be aware of this case
in order to correctly handle recovery mode key combinations.
BUG=chrome-os-partner:54602
BRANCH=None
TEST=Manual on gru. Do three-key salute, verify EC detects recovery mode.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I03d76e1121107484f79520745858388f6cae096c
Reviewed-on: https://chromium-review.googlesource.com/357590
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Changes were submitted for ec_commands.h but only in the braswell tree.
Merge in ToT for future reference.
BRANCH=none
BUG=chrome-os-partner:50627
TEST=compile.
Change-Id: I74f6ce3c5fd2a628879593a65506d10c44ee574d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356551
Not everything with a temperature sensor uses thermal throttling. This
change modifies the conditional build to enable building temp sensor
source without thermal throttling.
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I8c0753f12899e9f203c04477ae520bcda40d5fd8
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356484
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Added console commands for the debugging purpose
psys - Can be used to measure the system power
amonbmon - Can be used to measure AMON/BMON voltage diff, current
BUG=chrome-os-partner:54273
BRANCH=none
TEST=Manually tested on Amenia
psys - Ran fish task and observed psys value changes.
amonbmon - AMON & BMON voltage & current are same as measured
across sense resistors.
Change-Id: I6653e814d9b00efe7dae9ce1fbd7ddbc2356f8e0
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/353043
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
For designs where the host SOC is responsible for setting the USB-C SS
mux, the EC must track the desired mux state and inform the host when
the desired state changes. Then, the host must ask the EC for the new
desired state and set the mux accordingly.
BUG=chrome-os-partner:52639
BRANCH=None
TEST=Manual on gru with subsequent commit.
Attach USB dongle in port 1 and DP dongle in port 0, then verify `ectool
usbpdmuxinfo` output:
Port 0: DP
Port 1: USB
Flip DP dongle and verify output changes:
Port 0: DP INV
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6a99ce93a76c3197f9195cfaa25c5217d09aeb75
Reviewed-on: https://chromium-review.googlesource.com/355281
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
