This allows boards to detect the battery and return the correct temp
ranges, which will be needed for upcoming boards.
In the board-specific implementations, it's pretty much just moving
the fields from one const struct to another, so the impact is minor.
BUG=chrome-os-partner:24310
BRANCH=none
TEST=build all platforms; verify pit and rambi still charge
Change-Id: I7be075b3abb4039577f6362316adc1860c121d5c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178424
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Smart batteries can report capacity in mAh or 10mW units. We forced
the units to mAh in charge_state.c's main loop, but that doesn't
guarantee that they're actually set before the capacity is read. It's
cleaner to check the capacity reporting mode when actually reading the
capacity.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=battery command reports the same capacity data before/after change
(on rambi, design=2940 mAh)
Change-Id: I4a4c80eaade72bb09627d5d65693c097e264a992
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176154
The charge state machine asks for all of this stuff at the same time
anyway. Bundling it into a single function removes a number of
redundant (and painfully slow) I2C reads.
Also refactor the battery debug command so it doesn't have so many
local variables all in one function; it was consuming considerably
more stack space than any other debug command.
Spring still needs low-level access to the smart battery, so move the
two functions it needs directly into the Spring implementation.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=charge/discharge rambi, pit and spring; watch debug messages and
LED and output of 'battery' debug command. All should behave the
same as before. Then run 'taskinfo' and see that the console task
has at least 20 bytes unused.
Change-Id: I951b569542e28bbbb58853d62b57b0aaaf183e3f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177797
Bolt uses Link's battery, but doesn't override the smart battery charge
profile with CONFIG_BATTERY_VENDOR_PARAMS. But the image still compiles and
includes the battery_vendor_params() function, although it's never called.
This CL stops doing that.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
Build all targets.
Confirm that Link still has battery_vendor_params():
$ make BOARD=link
$ nm build/link/common/charge_state.o | grep vendor
U battery_vendor_params
$ nm build/link/driver/battery/link.o | grep vendor
00000009 T battery_vendor_params
$
Confirm that Bolt does not have battery_vendor_params():
$ make BOARD=bolt
$ nm build/bolt/common/charge_state.o | grep vendor
$ nm build/bolt/driver/battery/link.o | grep vendor
$
Change-Id: I48a535208bdcfd3d2cb26f6f15a28a728dbe4d0b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175731
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The smart battery status register holds some useful info. This displays it
along with all the other stuff.
This decodes the alarm and status bits, but not the error code, since that
field is only valid immediately after a failed i2c transaction (that's how
the battery indicates error). Since we do all sorts of automatic battery
probing in other threads, that value will never be reliable when we run the
"battery" console command.
BUG=none
BRANCH=none
TEST=manual
Run "battery". You should see a new line amongst the output:
Status: 0x00c0 DCHG INIT
Change-Id: I5e684198af2cf7767f89786c91a7d946ad95d4c2
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175659
Previously, it was really confusing whether I2C_PORT_HOST meant the
port where the EC was the master, or the port used to talk to the AP.
No functional changes, just a global find/replace and some tidying of
unused comments.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: Ia591ba4577d3399729556e0234ba0db3a0e3c5ea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174546
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Rather than hackily sending a host response before sending the battery
cutoff command, just put the cutoff command in a deferred function
call and respond normally to the host command.
BUG=chrome-os-partner:23568
BRANCH=none
TEST=On battery power, 'ectool batterycutoff' prints success, then the
system loses power due to battery cutoff.
Change-Id: Ic42d08ef94a10f89d093290cda63da01fca985a5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174573
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The common/ subdir was getting cluttered. Move drivers for external
components to a new driver/ tree, and move what used to be called
chipset_*.c to a new power/ directory.
This does not move/rename header files or CONFIG options. That will
be done in subsequent steps, since moving and modifying .c files in
the same CL is harder to review.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I67a3003dc8564783a320335cf0e9620a21982d5e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173601
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
