This unifies the PWM module interface for LM4 and STM32. Now PWM
channels are defined in board.h/board.c. Instead of calling functions
named pwm_set_fan_duty(x), one can now use pwm_set_duty(PWM_CH_FAN, x),
which prevents additional functions added when we have a new PWM
channel.
BUG=chrome-os-partner:18343
TEST=Limit input current on Spring.
TEST=Check power LED in S0/S3/S5 on Snow.
TEST=Check keyboard backlight functionality on Link.
TEST=Check fan speed control/detecting on Link.
BRANCH=None
Change-Id: Ibac4d79f72e65c94776d503558a7592f7db859dc
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/64450
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Test config is now in test/test_config.h. Let's remove the unused config
lines in board/host/board.h.
BUG=chrome-os-partner:19235
TEST=Pass all tests.
BRANCH=None
Change-Id: Ic8f7f4dcf8e0ad5f8800fe8ad2ae89b604a239f4
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66742
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Problems with existing thermal control loop:
* Not multi-board friendly. thermal.c only supports Link and needs
refactoring. Temp thresholds and fan speeds are hard-coded.
* Only the PECI temp is used to determine the fan speed. Other temp sensors
are ignored.
* Has confusing data structures. Values in the CPU temp thresholds array mix
ACPI thresholds with fan step values.
With this change, the thermal task monitors all temp sensors in order to
perform two completely independent functions:
Function one: Determine if the host needs to be throttled by or informed of
any thermal events.
For thermal events, each temp sensor will have three threshold levels.
TEMP_HOST_WARN
* When any sensor goes above this level, host_throttle_cpu(1) will be called
to ask the CPU to slow itself down.
* When all sensors drop below this level, host_throttle_cpu(0) will be called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_HIGH
* When any sensor goes above this level, chipset_throttle_cpu(1) will be
called to slow the CPU down whether it wants to or not.
* When all sensors drop below this level, chipset_throttle_cpu(0) will be
called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_SHUTDOWN
* When any sensor is above this level, chipset_force_shutdown() will be
called to halt the CPU.
* Nothing turns the CPU back on again - the user just has to wait for things
to cool off. Pressing the power button too soon will just trigger shutdown
again as soon as the EC can read the host temp.
Function two: Determine the amount of fan cooling needed
For fan cooling, each temp sensor will have two levels.
TEMP_FAN_OFF
* At or below this temperature, no active cooling is needed.
TEMP_FAN_MAX
* At or above this temperature, active cooling should be running at maximum.
The highest level of all temp sensors will be used to request the amount of
active cooling needed. The function pwm_fan_percent_to_rpm() is invoked to
convert the amount of cooling to the target fan RPM.
The default pwm_fan_percent_to_rpm() function converts smoothly between the
configured CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX for percentages
between 1 and 100. 0% means "off".
The default function probably provide the smoothest and quietest behavior,
but individual boards can provide their own pwm_fan_percent_to_rpm() to
implement whatever curves, hysteresis, feedback, or other hackery they wish.
BUG=chrome-os-partner:20805
BRANCH=none
TEST=manual
Compile-time test with
make BOARD=falco runtests
On the EC console, the existing fan commands should work correctly:
faninfo - display the fan state
fanduty NUM - force the fan PWM to the specified percentage (0-100)
fanset RPM - force the fan to the specified RPM
fanset NUM% - force the fan to the specified percentage (0-100) between
its configured minimum and maximum speeds from board.h
(CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX)
fanauto - let the EC control the fan automatically
You can test the default pwm_fan_percent_to_rpm() with
fanset 1%
faninfo
The fan should be turning at CONFIG_PWM_FAN_RPM_MIN. Let the EC control it
automatically again with
fanauto
Also on the EC console, the thermal settings can be examined or changed:
> temps
PECI : 327 K = 54 C
ECInternal : 320 K = 47 C
G781Internal : 319 K = 46 C
G781External : 318 K = 45 C
>
> thermalget
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 0 0 0 G781Internal
3 0 0 0 0 0 G781External
>
> help thermalset
Usage: thermalset sensor warn [high [shutdown [fan_off [fan_max]]]]
set thermal parameters (-1 to skip)
>
> thermalset 2 -1 -1 999
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 999 0 0 G781Internal
3 0 0 0 0 0 G781External
>
From the host, ectool can be used to get and set these parameters with
nearly identical commands:
ectool thermalget
ectool thermalset 2 -1 -1 999
Change-Id: Idb27977278f766826045fb7d41929953ec6b1cca
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This tests that command history is as expected. Also fix a bug that some
checks in console_edit test are skipped.
BUG=chrome-os-partner:19236
TEST=Pass console_edit test.
BRANCH=None
Change-Id: Ifbd3d1690f25b35bf5efe523e656b013aa534d26
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64837
GPIO alternate functions used to be configured throughout the code,
which made it hard to tell which ones you needed to configure yourself
in board.c. It also sometimes (chip/lm4/i2c.c) led to GPIOs being
configured as alternate functions even if they weren't used on a given
board.
With this change, every board has a table in board.c which lists ALL
GPIOs which have alternate functions. This is now the only place
where alternate functions are configured. Each module then calls
gpio_init_module() to set up its GPIOs.
This also fixes a bug where gpio_set_flags() ignored most of the flags
passed to it (only direction and level were actually used).
On stm32f, gpio_set_alternate() does not exist, and pins are
configured via direct register writes from board.c. Rather than
attempt to change that in the same CL, I've stubbed out
gpio_set_alternate() for stm32f, and will fix the register writes in a
follow-up CL.
BUG=chrome-os-partner:21618
BRANCH=peppy (fixes I2C1 being initialized even though those pins are used
for other things)
TEST=boot link, falco, pit, spring
Change-Id: I40f47025d8f767e0723c6b40c80413af9ba8deba
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64400
We've been declaring a bunch of statically-sized arrays:
extern struct foo_t foo[FOO_COUNT];
And then initializing them like so:
struct foo_t foo[FOO_COUNT] = {
/* blah */
};
That only catches cases where we initialize with too many entries. It
doesn't catch cases where we haven't initialized enough. This change tests
for both cases like so:
extern struct foo_t foo[];
struct foo_t foo[] = {
/* blah */
};
BUILD_ASSERT(ARRAY_SIZE(foo) == FOO_COUNT);
The affected arrays are:
adc_channels[ADC_CH_COUNT]
gpio_list[GPIO_COUNT]
temp_sensors[TEMP_SENSOR_COUNT]
x86_signal_list[X86_SIGNAL_COUNT]
i2c_ports[I2C_PORTS_USED]
BUG=chrome-os-partner:18343
BRANCH=falco,peppy
TEST=build all platforms
All platforms should still build, all tests should still pass.
Change-Id: Ibb16dc3201f32df7cdc875648e89ba4ffb09f733
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63833
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Some chargers can run in a "turbo" mode, which lets it draw from the battery
to provide extra power to the AP in short bursts. In order for this to work
properly, the EC has to watch the current closely to make sure specific
limits are observed. It also has to recognize specific adapters, since those
limits vary depending on the rated power that the adapter can provide.
This adds the basic functionality, plus a test for it.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
make BOARD=${BOARD} runtests
On Falco, you can also use the "adapter" EC command to see what's going on.
Try replacing the adapters and running that command to be sure they're
correctly identified, too:
> adapter
Adapter 65W (590mv), turbo 1, AP_throttled 0
>
We currently support 45W, 65W, and 90W adapters. Unknown adapters are
treated as 65W, but don't enable turbo mode.
Change-Id: I7e5407db825ce7e596cb495fb8cb4d1dd1ff639c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63372
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We can't change CONFIG_ options from the gcc commandline, because
include/configs.h explicitly undefs them again. So for some tests, we add a
-DFOO to the command line and then put this in the source:
This change just uses TEST_FOO instead of FOO, so it's more obvious what's
happening.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
No functional change, just renaming. Run
make BOARD=${BOARD} runtests
Everything should still pass.
Change-Id: I17e10180f8d779dff0961cf411f5b61cfc70c316
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63371
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
CONFIG_FMAP is now defined by default, because all platforms other
than the host unit tests use it.
No functional changes, just renaming config options and removing dead code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie6496310c822491068e2fa6976933486f26badb0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63271
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This change moves vendor specific temperature ranges to battery pack
files or board setup files. And added a host test case to verify that
does not change x86 smart battery charging state machine behavior.
BUG=chrome-os-partner:21181
BRANCH=None
TEST=manual
build test: util/ecmakeall.sh
hosttests: make hosttests && make runtests
Change-Id: I48e76826b5555f64b78e3c063ce5f02416c72aa2
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62978
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just renaming config options.
Remove README, now that all options described in it have been moved to
config.h, and the remaining information is out of date. (Yes, we
should have a README which describes the organization of the EC
repository, but that's a matter for another CL; this one's about
cleaning up config options.)
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Iafefbe94369f1217c698f11d358bc0ecac2bdfde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63145
Reviewed-by: Vic Yang <victoryang@chromium.org>
All of these were defined on all but a few platforms, and those
explicitly #undef them. So define them as enabled by default in
config.h so the board.h files are cleaner.
No functional changes; just rearranging/renaming config constants.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; FEATURES=test emerge-falco chromeos-ec
Change-Id: I1201a1472ae29641e9e219c2a0347691ca64cd28
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63102
Reviewed-by: Vic Yang <victoryang@chromium.org>
Both of these are included via common.h, which is in turn included by
most other header files. Directly including board.h or config.h is
redundant and discouraged.
No code changes, just removing #includes.
This is in preparation for making a top-level config.h file, but that
change will be easier to review if it doesn't touch as many files.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I204bcebe5607c6e6808821eb071cfc31d2a93a7c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62121
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This tests host event and hook are triggered when AC status changes.
BUG=chrome-os-partner:19236
TEST=Pass the test.
BRANCH=None
Change-Id: I9e4263f3f6e273bfb0b24671a4e5c56b20a04e1a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61554
Reviewed-by: Randall Spangler <rspangler@chromium.org>
GPIO_ENTERING_RW is an enum, not a macro, so the #ifdef evaluated to false.
BUG=chrome-os-partner:20761
BRANCH=spring
TEST=compile on all platforms; mccroskey doesn't break
Change-Id: Ib50989c7d2e47ab573ebc242259709b1712297ea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61295
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This enables ASSERT() for easier debugging.
BUG=chrome-os-partner:19235
TEST=Add ASSERT(0) in lid_sw test and see error message:
ASSERTION FAIL: test/lid_sw.c:91:run_test - 0
BRANCH=None
Change-Id: I7df7d5984e5d787fdc5ad2b6b24fec669e95c97e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56691
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is the first version of pthread-based RTOS emulator. With this, we
will be able to test high-level modules entirely on the host machine.
BUG=chrome-os-partner:19325
TEST='make runtests' and see tests passing.
BRANCH=None
Change-Id: I1f5fcd76aa84bdb46c7d35c5e60ae5d92fd3a319
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49954
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
