Update source and sink capacity tables for all PD boards. As
per spec, the first entry in both tables must be a fixed power
supply PDO. Added dual-role capable bit to fixed PDOs and added
new state variable to keep track of that information for each
port. This will be used to make decisions in charge manager and
to pass up via host commands.
BUG=chrome-os-partner:28869
BRANCH=samus
TEST=make buildall. use "pd 1 status" to check
if part partner is dual-role capable and check zinger is not,
C to A receptable adapter is not, and another samus is.
Change-Id: I49f034a372bc145cd524577c17ca210eec4c1013
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227170
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Add flag for whether or not device plugged into a given port is a
dual-role PD device. For now, the dual-role flag is always 0, but
need to add the flag to the host command now for compatibility
in the future.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=load onto samus, run ectool --name=cros_pd usbpdpower and
verify that for anything plugged in it says "dedicated charger"
Change-Id: I2d3c8c149802492f27a87a47aaa68fbf505ee7a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226820
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Get type-c port power info including power role, charger type,
and charging info. Also added host command to get number of type-c
ports.
Also adds new charging suppliers for pericom identified chargers
including DCP, CDP, SDP, proprietary, and other chargers. Priority
of these for charging is set in samus board file.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=run 'ectool --name=cros_pd usbpdpower' and verify correct
status with minimuffin, zinger, and type-C to type-A adapter.
Change-Id: I1dabbe7de4185a23df5684a5ea9a2d944f1f6ff5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223523
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow the list of charge suppliers and port selection priority to be
specified at the board level.
BUG=chrome-os-partner:32650
TEST=Manual on samus_pd. Plug + unplug PD and BC1.2 chargers, verify
that PD is always preferred and higher power port / supplier is always
selected.
BRANCH=Samus
Change-Id: Ic867a40120c809111bf76bf290ed6f204eab1168
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225292
Reviewed-by: Alec Berg <alecaberg@chromium.org>
charge_manager is intended to manage charge limits from various tasks
(typically PD charge tasks and USB / BC 1.2 charge tasks). These tasks
can update the charge limit of a port by calling charge_manager_update
(thread-safe function). If the charge limit has changed,
charge_manager_refresh will be queued as a deferred task, which will
select the "best" charge port and set the proper charge limit.
In order to use charge_manager, a board needs to do the following:
1. Declare PD_PORT_COUNT in usb_pd_config.h
2. Implement board_set_charge_limit
3. Implement board_set_active_charge_port
4. Call charge_manager_update whenever the available charge on a port changes.
BUG=chrome-os-partner:31361
TEST=Manual on samus_pd, with subsequent commit. Insert and remove
various chargers, check console to verify PD charger always has priority
and correct current limit is set based upon 'best' charger.
BRANCH=samus
Change-Id: Iede120b69e0b46ed329bcf9b7e07c39ba5e9f77b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222723
Reviewed-by: Alec Berg <alecaberg@chromium.org>
