The register format of INA231 and INA219 are very much alike. In our
use case, we only need to use different coversion coefficient.
BRANCH=None
BUG=chrome-os-partner:32764
TEST='ina 0' on Plankton V2.
TEST=Build twinkie.
Change-Id: I9c8e21e30ed844566793dcc1221f865400c3d90d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223370
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Previously our accel / gyro drivers assumed that we had exactly two of
each identical part in the system. Some systems may have different
configurations, so allow this to be specified at the board-level.
Note that our motion_sense algorithm currently assumes that we have one
accelerometer in the lid and one in the base -- we'll need to fix that
in another CL.
BUG=chrome-os-partner:27320
TEST=Compile-only. Tested in future Samus commit.
BRANCH=None.
Change-Id: I1fae1f6c578fedebe78b473a5d66a5794ccaae00
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212321
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This is a complete rewrite of the charge_state task used by x86 platforms.
Rather than having a bunch of state-specific functions, each with their own
error handling and special cases, this is organized like so:
Forever:
1. Read everything we can from the battery and charger.
2. Figure out what we'd like to do (including error handling).
3. Allow for customization to override that.
4. Do it.
Things I need to file bugs for are marked with "TODO(wfrichar)". I'll file
the bugs after this CL goes in, so that they'll have something relevant to
refer to.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=manual
make buildall -j
Try it on Samus, watch it charge from nearly empty to full, both with and
without fastcharge enabled.
Also undefine CONFIG_BATTERY_PRESENT_CUSTOM, plug and unplug the battery to
be sure the trickle charging logic is correct when it can't tell if the
battery is present.
Change-Id: I3935cd3b87f322eb52178f8a675a886c16b75d58
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191767
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add support TI BQ24773 1S/2S/3S NVDC battery charger.
This is not a "Smart Battery" compliant charger IC, it should and cannot
use the sbc_ helpers.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=on FruitPie, run "charger" command on the EC console,
add the charger task and see the battery charging.
Change-Id: I6f470184f0ce424a05007e493d802dcdb2156477
Reviewed-on: https://chromium-review.googlesource.com/191212
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Added accelerometer driver for kxcj9 accelerometers. Currently
the accelerometers aren't being used by anything, but there are
console commands, accelwrite and accelread, to perform transactions.
BUG=none
BRANCH=rambi
TEST=Used EC console commands to test that accelerometers respond
and data looks reasonable.
Original-Change-Id: I6ddcf04ec278adeacb148c19b10c3c296b467954
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/184693
Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 5e1d2052b034b2400b98b2126243e01397a2ce56)
Conflicts:
board/clapper/board.c
board/clapper/board.h
board/glimmer/board.c
board/glimmer/board.h
Change-Id: If8744ddc3273fc08e29830adfd068dc302dd120a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187432
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows local and remote temp values to be added
to a board's list of temp sensors. It also adds a
'tmp432' EC console command to query temps
and set alert thresholds. Fractional degrees are not
supported. DPTF support is not addressed.
BUG=chrome-os-partner:23985
BRANCH=none
TEST=Add tmp432 support to a board with the sensor
then run the 'tmp432' and 'temps' EC console commands.
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: Ifee47cf4d4cf5eedef9ef2bfa2149f183f1d7a7b
Reviewed-on: https://chromium-review.googlesource.com/178688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>
This adds the driver and a console command to read an Intersil ISL29305
light sensor connected to the EC.
BUG=chrome-os-partner:23380
BRANCH=samus
TEST=manual
Run the "als" command from the EC console, while pointing the sensor in
various directions. It should give higher numbers when facing a light
source. If you get "Error 1", it means the ALS isn't powered.
Change-Id: I855ed64dab7fc60e29126ab3e97669be24dc6a64
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176056
The common/ subdir was getting cluttered. Move drivers for external
components to a new driver/ tree, and move what used to be called
chipset_*.c to a new power/ directory.
This does not move/rename header files or CONFIG options. That will
be done in subsequent steps, since moving and modifying .c files in
the same CL is harder to review.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I67a3003dc8564783a320335cf0e9620a21982d5e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173601
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
