Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Refactored keyboard scan enable/disable flag such that it is a mask of
potential disable sources. When all disable sources are off, scanning is
enabled, otherwise scanning is disabled. This fixes a recently introduced
bug in which enabling/disabling keyboard scanning due to lid angle in S3
was interfering with enabling/disabling keyboard scanning due to power
button. This also allows for easy expansion for future causes for disabling
keyboard scanning.
BUG=chrome-os-partner:27851
BRANCH=rambi
TEST=Manual tests with a glimmer. Used the ksstate console command to
check state of keyboard scanning under all permutations of power button
pressed/unpressed, lid switch open/closed, and lid angle in tablet position
vs. laptop positon.
Change-Id: Ied4c5ebb94510b1078cd81d71373c0f1bd0d6678
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194287
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added a sub-command to the motionsense host command (0x2b) for getting/setting
the lid angle at which the keyboard is disabled as a wake source in S3. The
value can be anywhere from 0 to 360 degrees, default set to 180. Note, this
only takes affect for boards that have CONFIG_LID_ANGLE_KEY_SCAN defined.
Modified ectool motionsense command to use new host sub-command.
Also modified the lid angle measurement in the EC to be in the range [0, 360],
instead of [-180, 180], and changed casting of lid angle as an int to round
to nearest.
BUG=none
BRANCH=rambi
TEST=Tested on a glimmer:
Using default keyboard disable lid angle of 180, made sure that when lid
angle is past 180, key presses do not wake system, and when lid angle is
less than 180, key presses do wake up system.
Used ectool motionsense kb_wake to set the keyboard disable lid angle to 0.
Made sure that keyboard never wakes up the system. Set keyboard disable lid
angle to 360 and made sure that the keyboard always wakes up the system.
Change-Id: I437164c6e38c29169ef6e20e86c9cf2a1c78f86e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193663
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194172
Added ability to disable the keyboard to wake from suspend when the lid
is outside a certain angle range. This has been added to glimmer by
defining CONFIG_LID_ANGLE_KEY_SCAN in its board.h.
Also modified the lid angle calculation to include a reliability
flag which can be used to tell when the hinge aligns too closely
with gravity and the lid angle value is unreliable.
BUG=none
BRANCH=rambi
TEST=Tested on a glimmer:
In S3, verified that when the lid is open past ~180 deg, the keyboard
does not wake the machine. Also verified that if you align hinge with
gravity, the keyboard enabled/disabled status remains the same (since
we can't actually trust the lid angle value).
Change-Id: I45b2c7c3c4bbcae61d3a0f8b5baa461ab8dabfb0
Original-Change-Id: If1a1592d259902d38941936961854b81b3a75b95
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190061
Reviewed-on: https://chromium-review.googlesource.com/191612
Reviewed-by: Randall Spangler <rspangler@chromium.org>
