This workaround ensure that we can successfully get
register latch.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=chrome-os-partner:55044
TEST=We simulate the delay time between first and second read,
and prove this method can avoid latch fail.
Change-Id: I7cafb53a8efbb2eee09af29d7365806dc0deb762
Reviewed-on: https://chromium-review.googlesource.com/358730
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Default setting is at 48MHz.
For PLL frequency at 24MHz:
1. USB module can't work, it requires 48MHz to work.
2. SSPI clock frequency is divide by two.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. uart, i2c, timer, and pd modules are function normally
at different PLL frequency settings.
2. use 'flashrom' utility to flash EC binary with different
PLL settings.
Change-Id: Iabce4726baff493a6136136af18732b58df45d7f
Reviewed-on: https://chromium-review.googlesource.com/347551
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We have a limitation for EC interrupt vector registers.
System may read incorrect interrupt number in ISR so we need to add
a workaround to prevent it.
The following is a example that got incorrect interrupt number:
1. REG IVCTx = 0x10. (no interrupt pending)
2. EC INT6 interrupt occurs (IVCTx = 0x16) and jump to ISR.
3. Read interrupt vector register to determine interrupt number.
4. Higher priority interrupt of same interrupt group occurs
(for example: INT134, IVCTx = 0x96) while the system is reading the
interrupt vector register for EC INT6, we may end up with an incorrect
interrupt number between 0x16 and 0x96.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. EC interrupts work normally: WUI (GPIO interrupt), timer, uart,
LPC, I2C, and PECI.
2. Console command 'taskinfo'.
Change-Id: I54e61f417ad506eb3b4cd5d0652f64eed9a28a17
Reviewed-on: https://chromium-review.googlesource.com/322097
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. In combinational mode and clock source is 8MHz,
if timer 3 counter register always equals to 7, then timer 4 will be a
32-bit MHz free-running counter.
2. Fix TIMER_32P768K_CNT_TO_US(), each count should be 30.5175 us,
not 32.768us.
3. Fix TIMER_CNT_8M_32P768K().
4. Make sure LPC wake up interrupt is enabled before entering doze /
deep doze mode.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. Console commands: 'gettime', 'timerinfo', 'waitms', and 'forcetime'.
2. Enabled Hook debug, no warning message received (48hrs).
3. Tested ectool command 'version' x 2000.
Change-Id: I796d985361d3c18bc5813c58705b41923e28c5b1
Reviewed-on: https://chromium-review.googlesource.com/310039
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Implement deep doze mode for CONFIG_LOW_POWER_IDLE.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=test the following items in deep doze mode.
1. WUI interrupts wake-up OK. (For example, power button, lid,
uart rx, keyboard ksi, and so on)
2. LPC access interrupt wake-up OK.
3. Enabled Hook debug, no warning message received (48hrs).
Change-Id: I8702a112632cb6c1c0fa75d682badf272130a7d4
Reviewed-on: https://chromium-review.googlesource.com/307060
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
[chip config]
1. No hardware specific udelay().
2. Enable watchdog.
[watchdog]
3. Watchdog period is "CONFIG_WATCHDOG_PERIOD_MS" of config.h.
4. Watchdog auxiliary timer period is "CONFIG_AUX_TIMER_PERIOD_MS".
[task and irq]
5. Write 1 to clear interrupt pending status, no |.
6. A global variable for store interrupt number of software interrupt.
[uart]
7. Always reset UART module before config it.
[hwtimer]
8. Use more external timers for HW timer module.
[task]
9. Fix task profiling.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=[watchdog]
1. console "waitms 1100", only pre-watchdog warning message.
2. console "waitms 1600", warning message and watchdog reset.
[hwtimer]
3. console commands "gettime", "timerinfo", and "forcetime".
4. enable hook debug and there is no delayed by more than 10%
warning message over 48 hours.
5. There is no watchdog reset too.
[task]
6. console 'taskinfo'
Task Ready Name Events Time (s) StkUsed
0 R << idle >> 00000000 32.927724 308/512
1 HOOKS 00000000 0.034267 372/768
2 R CONSOLE 00000000 0.116763 468/768
3 HOSTCMD 00000000 0.000641 372/512
4 KEYPROTO 00000000 0.000042 212/512
5 KEYSCAN 00000000 0.000908 356/512
IRQ counts by type:
38 2932
155 1
158 261
160 67
Service calls: 87
Total exceptions: 3348
Task switches: 167
Task switching started: 0.001999 s
Time in tasks: 33.282819 s
Time in exceptions: 0.164717 s
Change-Id: I234085cec231cd855d2a5e639ea1b0966c61d796
Reviewed-on: https://chromium-review.googlesource.com/296939
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
symptom:
Unexpected watchdog reset console message if watchdog is enabled.
The IPC value of pre-watchdog warning is in idle task.
duplicate:
set time_us = 0xff000000 when timer init, watchdog will reset after
about 18 seconds.
also fix:
reload the watchdog counter while flash write.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. enable watchdog.
2. no unexpected watchdog reset.
3. ectool "flashwrite 0x20000 ec.RW.bin" no watchdog reset.
Change-Id: Ife10c2ead9c76462a865e694543e862b387d3b49
Reviewed-on: https://chromium-review.googlesource.com/292071
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Watchdog module added. Off by default because of following limitations:
- When programming, the WD fires, and programming fails. For now, you
have to program twice.
BRANCH=none
BUG=chrome-os-partner:23575
TEST=Manually wrote in a while(1); and made sure watchdog warning
triggers first, prints IPC register, and then soon after the watchdog
timer resets the chip.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Change-Id: Ia83f58f3ae108f755d2f139ada22a22e2fbdc2fa
Reviewed-on: https://chromium-review.googlesource.com/177397
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Initial support for the ITE IT8380 chip with the following peripherals :
- 8250-like UART module.
- HW timer (with a 128-us tick period).
- GPIO with pins initialization and edge interrupt support.
other functions are stubbed.
- Clock : basic fixed frequency setup only.
It also add the dev board configuration as a test vehicle.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23575
TEST=make BOARD=it8380dev
on IT8380 dev board, use the EC serial console, use gettime from
console.
Change-Id: Id4bf37d1beb21d1a4bee404c9a0bc500025fe787
Reviewed-on: https://chromium-review.googlesource.com/175481
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
