In old clock driver, the relationships between each clock sources are
ambiguous. For example, we treat OSC_CLK and FM_CLK as the same but
sometimes they're not on npcx5. (Only one OSC_CLK definition cannot
present the npcx ec's clock tree very well.) This CL added FM_CLK,
CORE_CLK, and APBx_CLK definitions and used macro functions to confine
the limitation of each clock sources in clock_chip.h to make it more
clearly.
We also modified the uart driver and fixed its source clock to 15MHz so
far in this CL. Since npcx7 already supports uart wake-up mechanism, we
removed the functions of switching pins from UART to GPIO by CHIP_FAMILY
definitions for saving code space.
It also includes:
1. Remove useless CHIP_VERSION definition.
2. Move frequency multiplier values M/N for OSC_CLK to clock_chip.h
3. Add clock_get_fm_freq() for the modules rely on it. Ex, peci.
4. Add clock turbo utilities for npcx7 series.
5. Support uart wake-up mechanism for npcx7 series.
BRANCH=none
BUG=none
TEST=No build errors for all boards using npcx5 series.
Build poppy board and upload FW to platform. No issues found.
Passed clock turbo, sysjump and wake-up from UART signals stress
tests on npcx796f evb.
Change-Id: Id01a8a5d0263f0d2438e6346dfa33bcdef2be56e
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/486821
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Our UART interrupt must be able to preempt our SHI_CS interrupt,
otherwise console input may be lost. Adjust our relative IRQ priorities
to accommodate this.
BUG=chrome-os-partner:55920
BRANCH=None
TEST=Run `echo "kbpress 11 4 1" > /dev/pts/17` on kevin 200 times from
the recovery screen, verify that all input is received by the EC.
Change-Id: I36203511f5883272287ac22d0704098fbd933758
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366622
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>
We found the deviation of ITIM32 is huge since apb2's clock isn't divisible
by 1MHz. (The default resolution of hwtimer is 1us.)
The solution is set the freq of apb2 the same as core clock. Note apb2 is
twice value of original one. It will increase power consumption slightly.
But we found the difference is acceptable no matter core clock is 15M
or 13MHz.
In this version, we also use the arrays to adjust i2c bus timing if
bus' freq is 400K or 1MHz for all source clock freqs of i2c.
Modified sources:
1. i2c.c: Support all source clock freqs of i2c for best bus timing.
2. clock.c: Set divider of apb2 if it's clock isn't divisible by 1MHz.
3. uart.c: Modified baud-rate for apb2 which is the same as core clock.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I6089caaaf9aa16186d7c6acf6f5fea0682a55655
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/327120
Reviewed-by: Randall Spangler <rspangler@chromium.org>
To get better power consumption in S0, we add FW support for
CONFIG_LOW_POWER_S0.
Before entering deep idle in S0, we must enable Host interrupt to wake up
EC if it needs to service LPC bus.
This version also add a new bit of sleep_mask (SLEEP_MASK_FAN) in system.h
to prevent EC enter deep idle if fan's duty isn't zero. Normally, the freq of
PWM fan is 25 kHz. It means we must select apb2 clock as the source clock of
PWM fan. Or fan would stop when ec enters deep idle because of no PWM signal.
In hwtimer.c, we reset the preload counter to maximum value in ITEI32's ISR
since preload counter is changed by __hw_clock_source_set all the time.
We also found there're no event set if it's deadline is over 32 bits but
current source clock isn't. To prevent ec doesn't wake-up in deep-idle even if
ITIM32 expires, FW set an event for ITIM32 after process_timers().
Modified sources:
1. wheatley/board.h: Add CONFIG_LOW_POWER_S0 definition.
2. clock.c: Enable Host interrupt for LPC.
3. clock.c: Disable LP_WK_CTL for better power consumption.
4. gpio.c: Add ISR for Host interrupt.
5. uart.c: Introduce bit 6 of USTAT to make sure transmitting is completed.
6. register.h: Add uart_clear_pending_wakeup function.
7. hwtimer.c: Fixed watchdog issue when ITIM32 is closed to overflow.
8. fan.c: Enable deep sleep if duty cycle is zero.
9. include/system.h: Add SLEEP_MASK_FAN for fan control loop.
10. core/cortex-m/task.c: Add "isb" to flash the garbage data in the
instruction pipeline.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ibe3630d0d68cf3f32206adb2afa1b5958916a2be
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/324651
Reviewed-by: Shawn N <shawnn@chromium.org>
We found the deviation of 115200 UART baud-rate is too large when core
clock is 16 or 12MHz. It causes failure during FAFT since sometime EC
could not receive correct commands to proceed test. We adjusted core
clock from 16/12 to 15/13 to reduce the deviation of 115200. Both of
them have run FAFT and stress tests for weeks and no UART issues were
found.
Since the lowest source clock of i2c is 6.5MHz, we modified tSCLL, tSCLH
and hold time directly for better i2c timing when freq is 400K. And if
freq is 100K, we introduced normal mode to handle it.
Modified sources:
1. clock.c: Adjust core clock from 16/12 MHz to 15/13 MHz.
2. clock_chip.h: Set target core clock as 15 MHz.
3. uart.c: Add baud-rate support for 15/13 MHz.
4. register.h: Add new register definitions of SMBus.
5. i2c.c: Modified tSCLL, tSCLH and hold time directly for better i2c
timing.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ie5d22e87875c064b49338046c99a178f8fadf32b
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/322320
Reviewed-by: Shawn N <shawnn@chromium.org>
Support lower core CLK frequency and configure the baudrate parameter of console
UART for current core CLK.
Modified drivers:
1. clock.c: Support lower core CLK frequency.
2. uart.c: Add baudrate setting for differenct core CLK.
3. clock_chip.h: Set default core CLK to 16MHz.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Id83ecf92c19bec508ec84e2d271d7e1fa278774f
Signed-off-by: CHLin <chlin56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/319030
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Add npcx_evb_arm board-level driver for arm-based platform.
Add header.c: for booting from NPCX5M5G A3 Booter.
Remove lfw folder due to those functionalitie have been replaced with Booter
Modified drivers for
Patch Set 1:
1. flash.c: Implement UMA lock, tri-state and selection register lock functionalities
2. hwtimer.c: Add ITIM32 for hwtimer
3. lpc.c: Add checking for LRESET
4. system.c: Modified CODERAM_ARCH functions for NPCX5M5G A3 Booter.
5. uart.c: Add support for module 2
Patch Set 2:
6. lpc.c: Modified lpc_get_pltrst_asserted() func
Patch Set 3:
7. minimize the changes for CONFIG_CODERAM_ARCH in common layer
8. comments of Patch Set1/2
Patch Set 4:
9. Modified CONFIG_RO_MEM_OFF point to ro image and keep header as a part of ec.RO.flat.
10. Fixed RO_FRID and RW_FRID issues which caused by CONFIG_CODERAM_ARCH.
Patch Set 5:
11. Modified system.c in common folder for supporting *_STORAGE_OFF.
12. Use *_STORAGE_OFF in firmware_image.lds.S to indicate flat file layout in flash.
Patch Set 6:
13. rebase to newest version
14. system.c: Modified for the newest include/system.h
Patch Set 7:
15. Merge from version 0625
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ifd7c10b81b5781ccd75bb2558dc236486976e8ed
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/272034
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Add npcx_evb in board folder for testing
Add shared-spi arch support in common layer.
Modified drivers for
1. Fan.c: console command “pwmduty”.
2. Pwm.c: for the issue when set duty to 0.
3. System.c: for hw reset only during system reset.
4. Flash.c: Fixed access denied bug of the flash driver for host command.
5. Comments from Patch Set 1
6. Comments from Patch Set 3 (except sha256.c)
7. Add openocd and flash_ec support for npcx_evb
8. Add little FW and spi-flash upload FW in chip folder
9. Add optional make rules for PROJECT_EXTRA
10.Replace CONFIG_SHRSPI_ARCH with CONFIG_CODERAM_ARCH and remove changes
in common layer sources for shared-spi arch. (except sysjump)
11.Find the root cause of JTAG issue and use workaround method
with SUPPORT_JTAG in clock.c
12 Execute hibernate in low power RAM for better power consumption
13 Add workaround method for version console command
14 Modified coding style issues by checkpatch.pl tool
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I5e383420642de1643e2bead837a55c8c58481786
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233742
