Even when CONFIG_RESTRICTED_CONSOLE_COMMANDS is enabled, there
are many commands that can't do anything dangerous. This marks
some of those commands as safe to use, even when restrictions are
enforced.
I'm only marking commands that are used by the Cr50, since that's
the only board that has restrictions.
BUG=chrome-os-partner:55322
BRANCH=none
TEST=make buildall, test on Cr50 hardware
Change-Id: I6289d332830175b6adcb6b20cb4c21d01d27a25e
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/376188
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
GPIO console commands currently only show input voltage level,
and can only set level on predefined outputs.
This change allows GPIOs to be cycled between output, input,
and alternate function, as well as displaying the mode and
asserted level (if any) in gpioget.
This change creates CONFIG_CMD_GPIO_EXTENDED
as the internal gpio interface needs to be changed to support
this, and I can't test the other architectures. It may be
worthwhile to add this for all, or not.
This change is also necessary also for servo micro JTAG and PD
UART support, as several pins are tied together on the flex
and stm32 outputs need to be variously active or in high-z
depending on mode.
BUG=chromium:571477
TEST=gpioget <0|1|IN|A|ALT>; gpioget;
BRANCH=None
Change-Id: Iba32992db6244ee1e654db840d1c9c11dd2a0993
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/338885
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
These commands, like other users of GPIOs should be able to use the
public GPIO API, and thus do not need to be coupled directly to the
GPIO common code.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Manually verified console commands on discovery board
Change-Id: I6e38b9d103590d4f7c72813a33437067716a858c
Reviewed-on: https://chromium-review.googlesource.com/329992
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Its implementation is the same on all platforms.
No functional changes, just renaming/moving.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I78741c6587ea61e7ac8edae5a509502b7ab5078b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47898
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This removes a bunch of unnecessary typecasts, since you can assign
to/from void * without them. This also uncovered a few cases where
const was being cast away for the input params; now fixed.
BUG=none
TEST=mkbp hash from u-boot console, and/or system boots ok
Change-Id: Ic314b9d2ca06226ea8a09703ef5c1a912eb7146d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28500
These commands are used in factory test. If system is locked, GPIO
commands are disabled for security reason.
BUG=chrome-os-partner:11164
TEST= - 'ectool gpioget enable_backlight' gives 1.
- 'ectool gpioset enable_backlight 0' turns off display.
- Lock system. Check these commands return error.
Change-Id: I3ea41285075ebe963ba7d30e4ae183cef9b1c105
Reviewed-on: https://gerrit.chromium.org/gerrit/27019
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Additional help messages and usage are gated by
CONFIG_CONSOLE_CMDHELP, so we can turn it on if there's space (adds
about 3KB to image size) and turn it off when there isn't.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual
1) help
2) help list
3) help gpioset
4) gpioset -> wrong number of params
5) gpioset fred 0 -> param1 bad
6) gpioset cpu_prochot fred -> param2 bad
Change-Id: Ibe99f37212020f763ebe65a068e6aa83a809a370
This is referenced by various files, so should be in the gpio.h header.
BUG=none
TEST=manual:
build and boot on daisy, see that USB download still works
build on all platforms
Change-Id: If579c975ef6c82988b9e411eeaa97c950d9efce4
Signed-off-by: Simon Glass <sjg@chromium.org>
This completes console output cleanup. The remaining calls to
uart_puts() and uart_printf() actually need to be that way.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
Change-Id: Ib1d6d370d30429017b3d11994894fece75fab6ea
The GPIO console commands are common to all platform, let's push them in
the common code.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make BOARD=link && make BOARD=bds && make BOARD=discovery
on BDS console, try gpioget command.
Change-Id: I26e6d26b8d661e78b80d5d5f665e81f4daef0c11
