Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add a X-macro CONFIG_LID_SWITCH_GPIO_LIST to be able to optionally
specify more than one GPIO to check to find out whether the lid is open.
By default, use GPIO_LID_OPEN as before.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:42110
TEST=on Smaug EVT2, define CONFIG_LID_SWITCH_GPIO_LIST as
LID_GPIO(GPIO_LID_OPEN) LID_GPIO(GPIO_BASE_PRES_L) and play with magnets
and the genuine lid, check we get the right "lid open" / "lid close"
messages on the console.
Change-Id: I9e7c67bb39f36f254d31d5861d535d69db754faa
Reviewed-on: https://chromium-review.googlesource.com/287852
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Factory test process need lid switch no function or keep lid opened
BUG=chrome-os-partner:33304
BRANCH=paine,yuna
TEST=Run command "ectool forcelidopen 1" and "reboot". Then lid close
quickly, the system boot as lid opened.
Deault value or run command "ectool forcelidopen 0" make the device normal.
Change-Id: I94527b7ef7f9efe779c6b86f3eab651f99af6000
Signed-off-by: Henry Hsu <Henry.Hsu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/230180
Reviewed-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-by: Bowgo Tsai <bowgotsai@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The power button code is platform-independent. This change splits the
code out of the LM4 switch.c module so that a subseqent change to
STM32 platforms can start using it.
BUG=chrome-os-partner:18945
BRANCH=none
TEST=manual
1. Power+refresh+esc goes to recovery mode,
2. Press power button at recovery screen turns off.
3. With system off, power button turns system on.
4. Press power button for a second; screen locks.
5. Press power button while typing; blocks keystrokes while it's pressed.
6. Hold power button down for 8 sec; system forced to shutdown.
7. From EC console, with system on:
hostevent clear
hostevent -> event 0x04 is clear
press power button
hostevent -> event 0x04 is set
8. From EC console, with system off:
powerbtn -> system turns on
powerbtn 5000 -> system turns off, just like power button was held for 5 sec
Change-Id: If2a9b02514a201e1d03c857d128e2ccab51a16ef
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49217
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Link uses LID_SWITCH_L but it means the same thing as LID_OPEN. Changing
it to LID_OPEN so that all boards use the same name.
No functional changes, just renaming.
BUG=chrome-os-partner:18343
TEST=build link, bds
BRANCH=none
Change-Id: I74893e1365ad3068f13e7fe948f1a54c6c6301bb
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48893
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is now consistent with other boards.
No functional changes, just renaming,
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build link, bds
Change-Id: Ifd7c1ec608ab61f5f66800e91803ffafe1d944b6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48804
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This will allow ARM code to use the same lid switch code (in a subsequent CL).
BUG=chrome-os-partner:18343
BRANCH=none
TEST=open lid; system boots. close lid; system suspends. open lid; resumes.
Change-Id: I83536a3ad24c4446dccf8a6b6e296756659070a8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47043
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
