Added common code for charger profile override for fast charging.
Fast charging configs can be defined in the respective board battery
file and use the common code for imposing the custom data.
BUG=chrome-os-partner:59393
BRANCH=none
TEST=Enabled the config on Reef. Manually overrode the temperature
and voltage. Observed correct charge profile config is selected
for each tests.
Change-Id: I075d271258470b98d38e4d5395d749469d3fd469
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/407928
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In some cases, the virtual battery code creates
transactions that violate SB spec.
One example:
If the host command is structured as two messages -
a write to 0x03 (reg addr), followed by two bytes of write data,
the first byte of the second message (write data) will be sent to
virtual_battery_read(), as if it were a reg read request.
Let's do the following change for virtual battery:
1. Parse the command more carefully with state machines.
2. Support write caching for some critical registers.
3. Cache more attributes (0x03 and 0x0f).
BUG=chrome-os-partner:59239, chromium:659819
BRANCH=none
TEST='power_supply_info' works on kevin
Change-Id: Icdeb12b21f0dc3c329f29b206b7b9395ca4c9998
Reviewed-on: https://chromium-review.googlesource.com/407987
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
If battery is not present, input current is set to PD_MAX_CURRENT_MA.
If the input power set is greater than the maximum allowed system power,
system might get damaged. Hence, limit the input current to meet maximum
allowed input system power.
BUG=chrome-os-partner:58498
BRANCH=none
TEST=Manually tested on Reef. Removed the battery & using 'charger'
console command observed the following.
With Zinger charger at 20V - Input current is set to 2.25A
With Type-C & other chargers - Input current is set to 3A
Change-Id: Ife8686f322e095aa74b740a7c469bfe87107fb9a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/397865
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
ARM systems currently use SBS kernel driver which talks to the battery
through I2C passthu in the EC. Instead when asking for battery
information try getting it from the charge state machine first, and
then try the battery if charge state does not have the information.
This reduces latency by cutting out the battery response time.
BUG=chromium:484841
BRANCH=none
TEST=check that power_supply_info works properly on Jerry
Change-Id: If4da15ccabe412adc31fc94b189089ebb3e9265c
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/307905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
On samus it is possible to have AC plugged in but have the battery
discharging. So, add a new variable to charge state machine for
battery charging status and use that where necessary. For example,
the low battery shutdown code should now be based on whether or
not battery is charging rather than if AC is present.
This also changes the hibernate behavior when battery is low. The
change is to wait 30 seconds in G3 of low battery with no charging
before hibernating because for some chargers, like a USB PD charger,
the charger may increase it's current limit after a little bit of
time.
BUG=chrome-os-partner:34485
BRANCH=samus
TEST=test on samus. use low power charger and make sure that
ectool battery shows the "DISCHARGING" flag. use zinger and see
"CHARGING" flag. also use power_supply_info to make sure that
the battery state accurately reflects reality.
Change-Id: I8ac0267dd393071c4ca1fa24fbc9a13bf27848a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/235491
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Currently charge state machine resets input current limit to default
every time AC is connected. Problem is by the time charge state machine
gets around to setting input current, it could have already been set
by successful PD negotiation, and this ends up overriding that value.
This fix has the state machine store desired input current limit, as
determined from PD negotation or any other place, and send last desired
input current limit on AC connect.
BUG=chrome-os-partner:24461
BRANCH=none
TEST=load on samus, test toggling between "pd 0 dev 5" and "pd 0 dev 20",
and test plugging and unplugging zinger numerous times, and verify charger
command always gives the expected input current limit based on PD
negotiation.
Change-Id: I18d8acc9e2085739e783c9c70c682d46bcce7fdb
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211639
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This replaces the obsolete and temporary (ha!) EC_CMD_CHARGE_DUMP host
command with EC_CMD_CHARGE_STATE. This is used to monitor and adjust the new
charge state implementation, including any board-specific customizations.
This command is a single catch-all command with multiple subcommands
(similar to EC_CMD_LIGHTBAR_CMD) so that we don't have to keep adding new
top-level host commands just to support incremental changes.
BUG=chrome-os-partner:23776
BRANCH=ToT
TEST=manual
From the AP, try these commands:
ectool chargestate show
ectool chargestate param
ectool chargestate param <NUM>
ectool chargestate param <NUM> <VALUE>
Watch the EC console and use its "chg" command to verify the effects of
setting various params.
Note: the Samus-specific fast-charging profile override is param 0x10000.
You can check it with the EC console "fastcharge" command.
Change-Id: Iad2f773a085bc25c05073b3eed9866f122ae9d78
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193305
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is a complete rewrite of the charge_state task used by x86 platforms.
Rather than having a bunch of state-specific functions, each with their own
error handling and special cases, this is organized like so:
Forever:
1. Read everything we can from the battery and charger.
2. Figure out what we'd like to do (including error handling).
3. Allow for customization to override that.
4. Do it.
Things I need to file bugs for are marked with "TODO(wfrichar)". I'll file
the bugs after this CL goes in, so that they'll have something relevant to
refer to.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=manual
make buildall -j
Try it on Samus, watch it charge from nearly empty to full, both with and
without fastcharge enabled.
Also undefine CONFIG_BATTERY_PRESENT_CUSTOM, plug and unplug the battery to
be sure the trickle charging logic is correct when it can't tell if the
battery is present.
Change-Id: I3935cd3b87f322eb52178f8a675a886c16b75d58
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191767
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Remove copied code from V1 implementation, reduce to bare minimum needed to
satisfy external dependencies.
Don't actually enable it for any platforms, though.
BRANCH=ToT
BUG=chrome-os-partner:23776
TEST=make buildall -j
It's used by anything and doesn't do anything if it was, but test
compilation of the changed sources by defining CONFIG_CHARGER_V2.
Change-Id: Iea37d0b4fc48c8ebf7f7088cd1674d6e275d03d4
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190853
Reviewed-by: Randall Spangler <rspangler@chromium.org>
