This is keyboard test mechanism request for "multiple key press test",
we can thru the testing to scan out kso ksi pins shortting or keyboard has
multiple key pressing, below was the testing steps:
1. Turn off internal keyboard scan function.
2. Set all scan & sense pins to input and internal push up.
3. Set start one pin to output low.
4. check other pins status if any sense low level.
5. repeat step 3~4 for all keyboard KSO/KSI pins.
6. Turn on internal keyboard scan function.
BUG=chrome-os-partner:49235
BRANCH=ToT
TEST=manual
Short any KSO or KSI pins and excute "ectool kbfactorytest", it shows failed.
if no pins short together, it shows passed.
Change-Id: Id2c4310d45e892aebc6d2c0795db22eba5a30641
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/332322
Reviewed-by: Shawn N <shawnn@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
CONFIG_ macros should be set directly. Expanding the task names in the same
way made it difficult to tell what was a configuration choice and what was
due to changes in ec.tasklist
BUG=chrome-os-partner:18343
TEST=build all, run link
BRANCH=none
Change-Id: Ib82e34f974238ee2dd216f33b701b6f4c6a4f1f1
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49098
Reviewed-by: Randall Spangler <rspangler@chromium.org>
These were previously duplicated between multiple keyboard_scan.c and
board.c files, and there were a bunch of different constants #defined
to be 13.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
Change-Id: I91bf9d56d2a56ff25ff307ff10883ca87b6937e5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46165
This is the low-level platform-dependent interface to drive keyboard
columns, read rows, and handle keyboard interrupts.
Both lm4 and stm32 had something like this before, but the interfaces
weren't fully explicit or compatible.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=manual
- Build all platforms.
- Boot system and test typing on keyboard.
- Hold power+refresh+esc to test boot key detection; should go to recovery.
Change-Id: Ie3bcc1d066a4da5204f0e236daeb52c4064a6213
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46156
