At other times, the battery should follow the normal charging rules.
Using the trickle charging logic has 2 problems here:
1) Battery voltage is near maximum, so trickle charging logic starts
out with voltage less than the actual battery voltage, and less than
the charging spec.
2) Trickle charging only exits when battery requests more current
(which it won't if it's near full) or on 4-hour timeout, not when
battery reads 100%. So this can cause overcharging.
Note that we still limit the charging current to what the battery asks
for, but if that's less than the minimum current from the charger we
simply provide the minimum and don't fiddle with the voltage since
that may interfere with the battery's ability to determine it's fully
charged.
BUG=chrome-os-partner:14402
BRANCH=link
TEST=manual
1. charge laptop to full
2. quickly unplug and plug charger
3. look at debug log; should either not charge at all (if charge is currently
100%) or charge at 8400mV (if charge is less than 100%).
Change-Id: Ifd5a9eb2e9bb791f74196713b645d1c9211eb736
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/33729
Reviewed-by: Rong Chang <rongchang@chromium.org>
When AC power is not connected, EC doesn't update battery information in
mapped memory. This makes battery information unavailable is AC is not
present when EC boots.
BUG=chrome-os-partner:12858
TEST=Unplug AC and reset EC. Run ectool and check we can see battery
info.
BRANCH=link
Change-Id: I23339962a6aa1bbbf6806c1184b96e949466208f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30820
Reviewed-by: Rong Chang <rongchang@chromium.org>
The serial console was showing that the CPU was being forcefully shut down,
but I couldn't figure out why. Add a debug message so I'll know next time.
BUG=none
TEST=none
BRANCH=none
Change-Id: I6216711d03fd5e08190b9f0528a4bd8948b74dd8
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30606
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:12353
TEST=hack the thermal monitoring and/or battery code to trigger a shutdown
then see that the events get set
Change-Id: I5ef2ac03cdd793ab0c50c0db518cba1ede3ea036
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29429
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
It is possible that power LED goes off while AC still connected. Let's
set power LED periodically to aviod this problem.
BUG=chrome-os-partner:10386
TEST=Disconnect power LED while leave AC connected. Check LED goes off.
Connect LED again and check it comes back after few seconds.
Change-Id: I2a199446be5da772af8027b735b9f431f697bacd
Reviewed-on: https://gerrit.chromium.org/gerrit/29403
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
This removes a bunch of unnecessary typecasts, since you can assign
to/from void * without them. This also uncovered a few cases where
const was being cast away for the input params; now fixed.
BUG=none
TEST=mkbp hash from u-boot console, and/or system boots ok
Change-Id: Ic314b9d2ca06226ea8a09703ef5c1a912eb7146d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28500
BUG=chrome-os-partner:8039
TEST=manual
Boot the system, look at the lightbar. It should pulse colors slowly on
battery, faster on AC.
Change-Id: I0184973d11eda51db87d652aa2c92995f5a25588
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27810
Use these functions to get charging state and battery percent. Use
power_ac_present() from power_button.h to find out if AC adapter is present.
BUG=chrome-os-partner:8039
TEST=none
Change-Id: Ied670c297be316b0b8fa56a450a1566470099b5b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27830
Currently the only way to exit force idle state is to unplug AC power.
Let's add a host command to do so.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:9716
TEST=# ectool chargeforceidle 0
- Check nothing happened
# ectool chargeforceidle 1
- Power LED blinking green. Check current = 0.
# ectool chargeforceidle 0
- Power LED back to yellow. Check charging.
Change-Id: Ia8f504b6cf9f42b7d57af3ce2d240f3b00a095f1
Reviewed-on: https://gerrit.chromium.org/gerrit/27768
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Commit-Ready: Vic Yang <victoryang@chromium.org>
When battery is nearly full, battery sometimes demands for very low
current and we are actually trickle charging. This causes the last part
of charging process very long, but the actual charged amount is only few
mAh. Let's set power LED to green in this case so that user doesn't feel
the device is charging forever.
BUG=chrome-os-partner:11248
TEST=Charge the battery to nearly full. Disconnect and connect AC power.
Check the power LED is green when we are trickle charging.
Change-Id: Ide108778232e9f1d3abe6b61af7518af25040d10
Reviewed-on: https://gerrit.chromium.org/gerrit/27264
Commit-Ready: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Link battery pack specification suggested a lower charging current
when voltage pass 8.0V. But the lowering the current in constant
current phase leads voltage drop. And the battery goes back to
high current zone, < 8.0V.
This CL adds a 10 seconds debounce time to prevent charging current
change too quickly.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:9572
TEST=manual
watch battery V+ on oscilloscope when charging voltage cross 8.0V
Change-Id: I002f941e33b029e38f813ab2e292c6b73a054352
Reviewed-on: https://gerrit.chromium.org/gerrit/27275
Commit-Ready: Rong Chang <rongchang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
This command should only be accessible when flash write protect is
unlocked.
BUG=chrome-os-partner:9716
TEST= - Check we can charge and discharge normally.
- Connect AC and force idle. Check battery current is 0 mA.
Change-Id: I74a318c1f5562d6a23b722736615fd1f883dc35a
Reviewed-on: https://gerrit.chromium.org/gerrit/27259
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:11090
TEST=suspend laptop, then press power button; should resume from suspend
Change-Id: I36b7c62b2e115bb97d37defcd3c783af0f91d5f8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26730
And fix returning memory-mapped string length on LPC as well.
BUG=chrome-os-partner:11090
TEST=manual
from EC, 'hostevent set 0x40000'
from host, 'ectool eventget' --> should print 0x40000
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9edbd0a1468b5d4160ce67c471332226e51fa868
Reviewed-on: https://gerrit.chromium.org/gerrit/26719
Reviewed-by: Simon Glass <sjg@chromium.org>
Also add snprintf(), and %X format code.
BUG=chrome-os-partner:10206
TEST=timerinfo; should print correctly. 'ectool battery' on host side should print same serial as 'battery' on EC console.
Change-Id: I5c9f69d1a20ee5d0a59440c122655adbf62c9aea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/24635
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
And start wiring to x86_power so it can detect AC state changes
(needed to enable/disable turbo).
*YES*, this compiles for BDS/Daisy now...
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9069
TEST=plug/unplug AC power and look for "x86 AC on" / "x86 AC off" in debug log
Change-Id: I8399fab9637d6635a1c615f07448fd45b86bc25f
Preparatory work to use common host command code between ARM and x86.
Just rename constants, do not change the binary API.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I534d427c9b50103273835a6f32a0ddb622c762b3
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=taskinfo; note that number of IRQ8 (I2C0) exceptions goes up more slowly
Change-Id: Ib93aaab80fdd19b7a35aec43903393baf506f2e8
This change adds battery operating temperature check. Host and EC
will be turned off when overtemp. EC can be waked up by predefined
external signals like key press or AC_PRESENT gpio.
For safty reason, this change does not check battery temperature
after EC deep sleep.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:8451,9108
TEST=none
Mock battery_temperature() fucntion to test.
Change-Id: I3203515b3df86192f690f9b98901020209ce49b3
This adds a 'ch' command which prints/sets which channels are active
This handles all the async output; the remaining debug commands will
be refactored to use ccprintf() / ccputs() in a followup CL.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
ch --> all channels active
ch 0x100 -> just port80 active
powerbtn -> system boots; only port 80 codes shown on console
Change-Id: I9efc43acec919b62b78c2c82c61946d32380adfe
Adding trickle charging mode to precharge batteries with
voltage lower than minimal design value. This CL adds
control to charger voltage to track battery input current
change.
To prevent battery from deeply discharging, this CL preserves
3% of the design capacity.
Minor bug fixes include error state check and charger control
logic.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:8660,8661
TEST=manual
Plug AC power, the power adapter led should be
'yellow'. On the EC serial console, type 'battery'
and 'charger' commands.
Battery input current should staid close to its
desired current.
A deeply discharged battery (5.5V) should be revived to
a healthy state after 30 minutes ~ 4 hours.
Change-Id: Ibaa2396c6b751639d98db32f5919b1e8ec700e40
This data is used to populate the _BIF/_BIX packages in ACPI
but it currently needs an EC command to retrieve that isn't
easy to query in ACPI since it isn't using standard EC RAM.
1) Export these additional fields in init() state:
- Design Capacity of Full
- Design Voltage
- Last Full Charge Capacity
- Cycle Count
- Manufacturer String
- Model String
- Serial Number String
2) Fix an issue where battery current was not reported when
the battery was charging.
3) Remove the command interface so there is no duplication.
BUG=chrome-os-partner:7734
TEST=using (not yet published) coreboot to read battery status
via ACPI and verify that battery removal/insertion events
are properly handled.
Change-Id: If337aad3255e5b1a0f85168838f1dd86a32bbeb3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
This CL adds battery SMI events. And refactors the charging state
machine by adding share state context for all handlers.
Power events are moved to common handler. Minor clean up on console
output messages.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:7526,7937,8450
TEST=manual:
Watch console message when connecting/disconnecting AC adapter and
battery. Check the state transition.
Change-Id: I42eec4f87a9d49bd193cb9dde9080e3dfccbb77c
Also prints the current timer value when inits are done, and when the
watchdog task first gets to run (after all higher priority tasks sleep
at least once).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: I342f86ad087fd18ab064a10a5bcdd0b69ee373d0
This CL adds a charge state machine for SMB compliant battery pack.
Vendor specific charge constraints can be applied through function
call, defined in battery_pack.h .
BUG=chrome-os-partner:7526
TEST=Attach EC serial console
Unplug AC adapter: state ==> "discharge"
Plug AC adapter: state ==> "charge"
Battery full: state ==> "idle"
Unplug battery: state ==> "error"
Change-Id: Iabff0988a6067d37c17c11b060bbb7e66505c118
