This change corrects charger interrupt event handling, charger enable
gpio, battery full condition, EC deep sleep mode support when AC
unplugged, and lid controlled power off.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BRANCH=snow
BUG=chrome-os-partner:12573,12574,12575
TEST=manual
- ec console command 'gpioget':
- SPI1_MISO should be 0 when AP off
- CHARGER_EN should be 0 after AC unplugged
- charging led should be off after AC unplugged
- when battery remaining charge < 3%, system should be powered off
without AC.
- ec console command 'sleepmask 0', turn off AP:
- deep sleep only when AC unplugged
Change-Id: I0f63835dae67d90de7a8c8c6c3537ca9a16faed4
Reviewed-on: https://gerrit.chromium.org/gerrit/30316
Commit-Ready: Rong Chang <rongchang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
It was previously only enabled for 1500us during boot, but in a way
that triggered a needless round of notifications to other modules.
This is cleaner.
This also fixes adc_init() not initializing the task IDs to wake when
interrupts come in, and removes some unneeded code from other init
functions.
BUG=chrome-os-partner:12472
TEST=boot system and run adc command. Should still provide reasonable data.
Change-Id: I9ae5857d988c727caf5d53f551a2f12b30974c0f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29806
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
When the AP is not running and we have enough time go to STOP mode
instead of simple idle.
The EC consumption should drop from 12mW to a few mW.
This is currently not activated by default, you need to type "sleepmask
0" in the EC console to activate it.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8866
TEST=on Snow, check the software is still working properly when STOP
mode is activated and measure power consumption on 3v_alw rail.
Change-Id: I231d76fe6494c07b198c41694755b82d87c00e75
Reviewed-on: https://gerrit.chromium.org/gerrit/29315
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
This saves power.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8798
TEST=manual
Get a proto1 system modified with INA current sensor
1) From chroot:
dut-control i2c_mux_en:on i2c_mux:rem
dut-control pp3300_alw_mv pp3300_alw_ma
2) From EC console:
pll
(this should turn the PLL back on; it'll report clock frequency ~66MHz)
3) From chroot:
dut-control i2c_mux_en:on i2c_mux:rem
dut-control pp3300_alw_mv pp3300_alw_ma
Current (ma) should be bigger than in step 1
Change-Id: I806953684c57fd60bf481acb01dddffe2f2ad0ed
Add nopll command to turn off the PLL, reducing the system clock to 16Mhz.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8798
TEST=manual
boot system
press power button to boot x86
temps // should print all temperatures
timerinfo
timerinfo
timerinfo // convince yourself this is counting up at about 1MHz
nopll // this drops the system clock to 16MHz
temps // should still print all temperatures
timerinfo
timerinfo
timerinfo // should still be counting up at about 1MHz
Change-Id: Ie29ceb17af348148bffadf63d60c1b731f4c3f6d
