Since that already monitors the WP signal for reporting it as a
switch. And if we have that code in two places and the WP signal
polarity changes, we'll inevitably forget to change it in the other
place...
BUG=chrome-os-partner:11150
TEST=manual
flashinfo -> WP pin asserted
remove WP screw
flashinfo -> WP pin deasserted
Change-Id: I6091c8bb470c357e02ede8a5b184b2a76b70dc60
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27720
Keyboard scan module now owns the recovery key state on all platforms.
And clean up a few comments to linux kernel style
BUG=chrome-os-partner:10890
TEST=manual
- Power on system. Should boot normally.
- Power+Refresh+D. Should turn dev switch on.
- Power+Refresh+F. Should turn dev switch off.
- Power+Esc. Should reboot system. Power button should power on normally.
- Power+Refresh+Esc. Should power on into recovery mode.
- Then press power to shut system down.
- Power button should power on normally (not back into recovery mode).
Change-Id: I4d16e1e8b039efeacbd41e8acec115844bc8457d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26147
Reviewed-by: Simon Glass <sjg@chromium.org>
Keyboard recovery used to persist until the next time the EC was
reset. It should release the next time the user turns on the system
via the lid or power button.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:10034
TEST=manual
1. power system on normally. not in recovery.
2. press Power+Esc+Refresh. System turns on into recovery.
3. shut system down
4. power system on with lid-open. System boots normally.
5. repeat steps 2-3, then power system on with power button. System boots normally.
Change-Id: I455c7191d128614629c50ba27d7ef977e414fe90
Reviewed-on: https://gerrit.chromium.org/gerrit/24409
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
(Touchscreen was already disabled in S5)
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9736
TEST=from console, 'gpioget touchscreen_resetn' in these cases:
1) system is off -> 0
2) system is on with lid open -> 1
3) system is on with lid closed -> 1
4) system is suspended with lid open -> 1
5) system is suspended with lid closed -> 1
6) system is shut back down -> 0
7) suspend system with lid open, THEN close lid -> 0
Change-Id: I5fc80b72ea9dcfbf11f5280d79ae805c2ef1b6df
And start wiring to x86_power so it can detect AC state changes
(needed to enable/disable turbo).
*YES*, this compiles for BDS/Daisy now...
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9069
TEST=plug/unplug AC power and look for "x86 AC on" / "x86 AC off" in debug log
Change-Id: I8399fab9637d6635a1c615f07448fd45b86bc25f
This covers modules which need to initialize before task_start(), but
don't particularly care in what order they're initialized.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I69829aac8d1c3c14ee04916a794b84bbf03a09eb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7499
TEST=press and release power button; should see debug messages
Change-Id: I8909ae4643afc98753edb690771618ad43135e3e
