This produces a host binary running on the application processor and
which is able to re-flash th EC firmware over the AP-to-EC link (either
LPC or I2C).
The payload (ie the EC firmware) to use is embedded inside the flasher
binary.
This is just aimed at testing and developer upgrade. The auto-update
flow is using flashrom.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=build for link/daisy/snow/bds and tests
On Snow, run burn_my_ec from the serial console and see that the EC was
correctly re-flashed.
Change-Id: I7f90e773678a7ef3d8dc6dbacf54e80f3294607b
Reviewed-on: https://gerrit.chromium.org/gerrit/24236
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Allow to use EC tool on ARM based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On Daisy, ectool version
Change-Id: If7f52de827d0bcffb39af0553245cce4e02b9b48
Preparatory work to re-use the tools on ARM boards using I2C
communications.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make BOARD=link && make BOARD=bds && make BOard=DAISY
Change-Id: I31d41f30c3231a4a9349b939bf6bba871ed4c383
BUG=chrome-os-partner:7459
TEST=manual
In the chroot:
cd src/platform/ec
make BOARD=link
The firmware image (build/link/ec.bin) is signed with dev-keys. Reflash the
EC and try it, and it should verify and reboot into RW A.
Additional tests (setting USE_RO_NORMAL, poking random values into VBLOCK_A
or FW_MAIN_A to force RW B to run, etc.) are left as an exercise for the
reader. I've done them and they work, though.
Change-Id: I29a23ea69aef02a11aebd4af3b043f6864723523
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:7839
TEST=manual
cd src/platform/ec
make BOARD=link
copy ./build/link/util/lbplay to the host and run it as root.
Change-Id: I6a4a842b7500751185c8f4c2744f4389226bae9b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
When run with BOOT0=1 and BOOT1=0, the STM32L enters a system monitor
which allows flashing over the serial port (USART1 pins PA9 and PA10).
Implement commands to flash and run a program from a linux Host.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=on a serial port connected to Discovery board pins PA9 and PA10,
run manually the various tools commands.
Change-Id: I42f95ed50a56d82d728989149b3e47210af9dc96
This provides a pty for the EC UART channel on the BD-ICDI-B FTDI
daughtercard for EC debugging.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=make && build/bds/util/ec_uartd (with EC attached to FTDI board)
Change-Id: I51fe50d0da6345962affb860b923425197a04fa1
Build is the system doing the build (e.g. 64-bit linux) and host is the
target platform on top of the ec (e.g. 32-bit Chromium OS).
Necessary to get ectool properly compiling for Chromium OS.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=make && file build/bds/util/ectool; ectool should be a 32-bit binary
Change-Id: I50eba4c164ece236646a7c6087b1b86769beeb28
