Add build information (date/time/builder) which can be displayed at the
EC console.
Generate a version from the board name and the branch tag.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chromium-os:27013
TEST=on BDS, run version command on the console.
inspect the built binary.
Change-Id: Idb1f68898ba6b811d02919f17ab4536ed9f8934a
We used to have flaky PECI temperature read so we ignored failure. Now
the PECI temperature read seems to work fine so we should have it report
error on failure.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:7493
TEST=When powered off, 'temps' shows error on PECI temperature reading.
Change-Id: I161a8f84f66ba06959c21838ee364b2f8d8b4945
This is necessary to support SCI/SMI events.
Note that this breaks compatibility with previous ectool builds - and
probably also breaks flashrom support.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8253
TEST='ectool hello' and 'ectool flashinfo' still work
and 'ectool usbchargemode 3 1' fails with error 2
Change-Id: If39e5b6e7cdcec1b5ec765594e8492925b430b10
Currently if ENABLE_VS is off, each time we poll TMP006 sensors, it
takes 1 second for each sensor to return ERROR. Checking for power
before polling help to reduce the time spent on temperature polling.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8275
TEST=Manual test
Change-Id: I2da83f09cccc331074f9bb5483b2ba92c0865742
Add console command 'autofan' to turn on automatic fan speed control.
Also modify 'fanset' to disable automatic control before setting fan
speed.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8250
TEST=Manual test
Change-Id: I2db85ce2e754bba21567b2c92e4476049d517627
Implement LPC commands and ectool commands to
1. Set/get threshold temperature values.
2. Toggle on/off automatic fan speed control.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8251
TEST=Manual test
Change-Id: Ia4282a6fa47a838aed26540f33c1eb7acc92ef0e
The debug message is larger than UART transmit buffer so we have to
flush the output manually.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8265
TEST='tmp006' shows debug message of all TMP006 sensors.
Change-Id: I81793504e1a345b172567d3e877ee8740b85640c
The previous TX might end in the middle of the buffer filling and stop
TX. So we need to check if we want to restart the transmission.
With 1-byte deep FIFO, it's easy to trigger that race condition.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run console commands with lots of traces on BDS, Link and ADV and check
we are not stuck.
Change-Id: Ia57e974a3a51af694e736d4cf36d9d01eafd2251
If the last command is saved at the beginning of the buffer, loading
this command will lead to a character missing.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8261
TEST=Manual
Change-Id: I0afd4a264f342137955075fe2950444691f79d35
The thermal engine monitors the temperature readings from all sensors.
For each sensor, five threshold temperatures can be set:
1. Low fan speed.
2. High fan speed.
3. SMI warning.
4. Shutdown CPU.
5. Shutdown everything we can.
Each of these thresholds can be set to either a fixed value or disabled.
Currently the real implementation of SMI warning and shutting down is
left as TODO, as indicated in the comment.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8250
TEST=Manually change threshold value to test all actions can be triggered.
Change-Id: If168dcff78ef2d7a3203cb227e1739a08eca961e
'tempremote' is a debug command used to assess temperature calculation of
TMP006 sensor. Remove it since we have finished TMP006 module.
Also add back the fixed-point algorithm that is lost in rebasing earlier.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:7801
TEST=none
Change-Id: Ic3555c1a04d2c0483075262e3ab53842f7bd43d8
Actual RPM is now read from LPC mapped space. Modify this command to
return target RPM so we can verify EC receives target RPM.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8238
TEST=Get the same value after setting target RPM.
Change-Id: I9bcc9edd327cec1311b51fd0fcbc4a43b353daff
Temperature reading should be -1 on sensor failure.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8241
TEST="gpioset enable_vs 0" and "temps" gives "Error"
"gpioset enable_vs 1" and "temps" gives correct reading.
Change-Id: Ide82bd3433d3de12a749b0ee85f1ae1c6b12c5e5
We now read temp sensor readings using the EC mapped space.
So we don't need this command.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8239
TEST="ectool temps 0" works.
Change-Id: I47f425e45cea992b19734f39ac6d9f6db6433d39
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8097
TEST=manual
faninfo
should report fan is disabled
powerbtn
system turns on, fan turns on
faninfo
should report fan is enabled
powerbtn
system turns off, fan turns off
faninfo
should report fan is disabled again
Change-Id: I1be67004edb23ccd18ad434c9340bfbecc22e7c4
On bds, always send the keyboard scan code for the power button.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: I56ad8c9dd67edfd54190d64f16742896a86b9ac1
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8097
TEST=manual
faninfo
should report fan is disabled
powerbtn
system turns on, fan turns on
faninfo
should report fan is enabled
powerbtn
system turns off, fan turns off
faninfo
should report fan is disabled again
Change-Id: I8e94c142bf18d07f83bac05287bcd503a098cee7
Add a task to update temperature values in LPC mapped value space every
second. Also modify ectool to read directly from LPC mapped space.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8065
TEST="ectool temps" gives same result as "temps" from ec console.
Change-Id: Idcdef8d822724f9bd22d7e819c717cba5af5eb77
Update the timeouts during the power on sequence as recommended by
Frank.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run EC firmware on ADV board and let Frank control he likes the
signals.
Change-Id: I7391a1cdd5ad74e0c22e15eb996955c5b7719154
The PMIC_ACOK signal is active-low.
Let's drive it correctly.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On ADV board, check that a short key press on the power button is
now able to start the board
Change-Id: Iea71939aeb532618019a9e7774721703c632976f
Either a 8-second press on the power button or the XPSHOLD signal going
down (triggered the AP/PMIC shutdown sequence) will trigger a shutdown
of the system and switch off all power rails.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=on Discovery, test manually various power key press duration and
see power on/power off traces.
Change-Id: Ic37e4a51fe6b131034e24c55f05dae8119ce9992
A temperature polling task is added to achieve temporal correction and
also reduce the latency of reading temperature.
Factor out sensor specific part to keep code clean.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:7801
TEST=On link, 'temps' shows all temperature readings.
Cover each sensor with hand and see object temperature rise.
Compilation succeeded on bds/adv/daisy/discovery.
Change-Id: I3c44c8b2e3ab2aa9ce640d3fc25e7fba56534b86
