Remove code for preventing PD negotiation until the battery
is at some minimum SOC. This was originally necessary because
transitioning voltages would cause the source voltage to go
briefly to 0V, which would kill power to the system unless
the battery was at some minimum level of charge. But, that
isn't true anymore. It is safe to transition up or down in
voltage and the source voltage should never drop to 0V.
BUG=chrome-os-partner:29499
BRANCH=none
TEST=make -j buildall. No need to do any more testing because
this code has been disabled for a while.
Change-Id: I8a3dca117f01f0f9c7d04b5d489e4a8588a89be6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211021
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Revert
- https://chromium-review.googlesource.com/#/c/205145/2
- https://chromium-review.googlesource.com/#/c/205147/4
Now using the real AC_PRESENT gpio signal instead of whether or
not the PD MCU negotiated for 20V.
BUG=chrome-os-partner:29841, chrome-os-partner:29842
BRANCH=none
TEST=tested on a board with reworked AC_PRESENT signal. Verified
that gpio is correctly reporting state of AC and is charging when
AC is plugged in. Tested the no battery case to make sure
board powers on and stays on with just a charger. Also tested the
dead battery case by plugging in a dead battery, then plugging in
a charger and making sure system powers on and starts charging.
Change-Id: I4424771c91c8a2aa19eda68a8b5194e9265d529c
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/206598
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add a retry mechanism for EC to PD host commands to make the
communication channel more robust.
BUG=none
BRANCH=none
TEST=run on system to verify that we don't drop host commands
to PD MCU.
Change-Id: Ida6f02a149e4dd9e85a5aac21790928b16864104
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205148
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The ACOK input to the EC is not connected to the charger so
that signal cannot be relied on for AC presence. Instead
have the PD report when it negotiates to 20V and when it
disconnects and have the EC use that for AC presence.
BUG=chrome-os-partner:29841
BRANCH=none
TEST=test charging with zinger on samus system.
Change-Id: Ia9096a24ab05d110e31910218dc8c214a846a9a4
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205145
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Use a EC to PD host command to notify the PD MCU when a battery
is present and charged enough that it is ok to negotiate for a
higher power. The PD MCU will not negotiate until the host command
is received, which allows the system to be powered without a
battery or with a dead battery with 5V.
BUG=chrome-os-partner:28611
BRANCH=none
TEST=Tested on a samus:
1) Tested the normal case of battery charged and plugged in. When
charger is plugged in, the device immediately starts negotiating
for 20V and starts charging.
2) Tested with no battery. Plug in a charger, samus boots and stays
alive. VBUS measured at 5V. When a battery is plugged in, device
negotiates for 20V and starts charging.
3) Tested dead battery by taking a battery with no charge, and
plugging in zinger. Everything boots, but PD does not negotiate
for power. Then when battery reaches 1%, PD negotiates and zinger
switches to 20V without causing a reboot.
Change-Id: Iaa451403674e86cddbd3fe80e9503584910be576
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/201958
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
