Files
OpenCellular/common/flash.c
Randall Spangler 05bd0cdec7 Rename mixed-case config constants
This renames constants used in compiler conditionals to uppercase.
   BOARD_foo
   CHIP_foo
   CHIP_FAMILY_foo
   CHIP_VARIANT_foo
   CORE_foo

Mixed-case constants are still defined by the makefile, but are now no
longer used.  I will make one more pass in a week or so to catch any
that are part of someone else's CL, since otherwise this change might
silently merge correctly but result in incorrect compilation.  Then I
will remove defining the mixed-case constants.

BUG=chromium:322144
BRANCH=none
TEST=Build all boards.  Also, "git grep 'BOARD_[a-z]'" should return no
     results (similarly for CHIP, CORE, etc.)

Change-Id: I6418412e9f7ec604a35c2d426d12475dd83e7076
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179206
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
2013-12-16 20:28:32 +00:00

690 lines
18 KiB
C

/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Flash memory module for Chrome EC - common functions */
#include "common.h"
#include "console.h"
#include "flash.h"
#include "gpio.h"
#include "host_command.h"
#include "shared_mem.h"
#include "system.h"
#include "util.h"
#include "vboot_hash.h"
/*
* Contents of erased flash, as a 32-bit value. Most platforms erase flash
* bits to 1.
*/
#ifndef CONFIG_FLASH_ERASED_VALUE32
#define CONFIG_FLASH_ERASED_VALUE32 (-1U)
#endif
/* Persistent protection state - emulates a SPI status register for flashrom */
struct persist_state {
uint8_t version; /* Version of this struct */
uint8_t flags; /* Lock flags (PERSIST_FLAG_*) */
uint8_t reserved[2]; /* Reserved; set 0 */
};
#define PERSIST_STATE_VERSION 2 /* Expected persist_state.version */
/* Flags for persist_state.flags */
/* Protect persist state and RO firmware at boot */
#define PERSIST_FLAG_PROTECT_RO 0x02
/**
* Get the physical memory address of a flash offset
*
* This is used for direct flash access. We assume that the flash is
* contiguous from this start address through to the end of the usable
* flash.
*
* @param offset Flash offset to get address of
* @param dataptrp Returns pointer to memory address of flash offset
* @return pointer to flash memory offset, if ok, else NULL
*/
static const char *flash_physical_dataptr(int offset)
{
return (char *)((uintptr_t)CONFIG_FLASH_BASE + offset);
}
/**
* Read persistent state into pstate.
*
* @param pstate Destination for persistent state
*/
static void flash_read_pstate(struct persist_state *pstate)
{
memcpy(pstate, flash_physical_dataptr(PSTATE_OFFSET), sizeof(*pstate));
/* Sanity-check data and initialize if necessary */
if (pstate->version != PERSIST_STATE_VERSION) {
memset(pstate, 0, sizeof(*pstate));
pstate->version = PERSIST_STATE_VERSION;
}
}
/**
* Write persistent state from pstate, erasing if necessary.
*
* @param pstate Source persistent state
* @return EC_SUCCESS, or nonzero if error.
*/
static int flash_write_pstate(const struct persist_state *pstate)
{
struct persist_state current_pstate;
int rv;
/* Check if pstate has actually changed */
flash_read_pstate(&current_pstate);
if (!memcmp(&current_pstate, pstate, sizeof(*pstate)))
return EC_SUCCESS;
/* Erase pstate */
rv = flash_physical_erase(PSTATE_OFFSET, PSTATE_SIZE);
if (rv)
return rv;
/*
* Note that if we lose power in here, we'll lose the pstate contents.
* That's ok, because it's only possible to write the pstate before
* it's protected.
*/
/* Rewrite the data */
return flash_physical_write(PSTATE_OFFSET, sizeof(*pstate),
(const char *)pstate);
}
int flash_dataptr(int offset, int size_req, int align, const char **ptrp)
{
if (offset < 0 || size_req < 0 ||
offset + size_req > CONFIG_FLASH_SIZE ||
(offset | size_req) & (align - 1))
return -1; /* Invalid range */
if (ptrp)
*ptrp = flash_physical_dataptr(offset);
return CONFIG_FLASH_SIZE - offset;
}
int flash_is_erased(uint32_t offset, int size)
{
const uint32_t *ptr;
if (flash_dataptr(offset, size, sizeof(uint32_t),
(const char **)&ptr) < 0)
return 0;
for (size /= sizeof(uint32_t); size > 0; size -= 4, ptr++)
if (*ptr != CONFIG_FLASH_ERASED_VALUE32)
return 0;
return 1;
}
int flash_write(int offset, int size, const char *data)
{
if (flash_dataptr(offset, size, CONFIG_FLASH_WRITE_SIZE, NULL) < 0)
return EC_ERROR_INVAL; /* Invalid range */
#ifdef HAS_TASK_VBOOTHASH
vboot_hash_invalidate(offset, size);
#endif
return flash_physical_write(offset, size, data);
}
int flash_erase(int offset, int size)
{
if (flash_dataptr(offset, size, CONFIG_FLASH_ERASE_SIZE, NULL) < 0)
return EC_ERROR_INVAL; /* Invalid range */
#ifdef HAS_TASK_VBOOTHASH
vboot_hash_invalidate(offset, size);
#endif
return flash_physical_erase(offset, size);
}
int flash_protect_ro_at_boot(int enable)
{
struct persist_state pstate;
int new_flags = enable ? PERSIST_FLAG_PROTECT_RO : 0;
/* Read the current persist state from flash */
flash_read_pstate(&pstate);
if (pstate.flags != new_flags) {
/* Need to update pstate */
int rv;
/* Fail if write protect block is already locked */
if (flash_physical_get_protect(PSTATE_BANK))
return EC_ERROR_ACCESS_DENIED;
/* Set the new flag */
pstate.flags = new_flags;
/* Write the state back to flash */
rv = flash_write_pstate(&pstate);
if (rv)
return rv;
}
#ifdef CONFIG_FLASH_PROTECT_NEXT_BOOT
/*
* Try updating at-boot protection state, if on a platform where write
* protection only changes after a reboot. Otherwise we wouldn't
* update it until after the next reboot, and we'd need to reboot
* again. Ignore errors, because the protection registers might
* already be locked this boot, and we'll still apply the correct state
* again on the next boot.
*
* This assumes PSTATE immediately follows RO, which it does on
* all STM32 platforms (which are the only ones with this config).
*/
flash_physical_protect_ro_at_boot(new_flags);
#endif
return EC_SUCCESS;
}
uint32_t flash_get_protect(void)
{
struct persist_state pstate;
uint32_t flags = 0;
int not_protected[2] = {0};
int i;
/* Read write protect GPIO */
#ifdef CONFIG_WP_ACTIVE_HIGH
if (gpio_get_level(GPIO_WP))
flags |= EC_FLASH_PROTECT_GPIO_ASSERTED;
#else
if (!gpio_get_level(GPIO_WP_L))
flags |= EC_FLASH_PROTECT_GPIO_ASSERTED;
#endif
/* Read persistent state of RO-at-boot flag */
flash_read_pstate(&pstate);
if (pstate.flags & PERSIST_FLAG_PROTECT_RO)
flags |= EC_FLASH_PROTECT_RO_AT_BOOT;
/* Scan flash protection */
for (i = 0; i < PHYSICAL_BANKS; i++) {
/*
* Is this bank part of RO? Needs to handle PSTATE not
* immediately following RO code, since it doesn't on link.
*/
int is_ro = ((i >= RO_BANK_OFFSET &&
i < RO_BANK_OFFSET + RO_BANK_COUNT) ||
(i >= PSTATE_BANK &&
i < PSTATE_BANK + PSTATE_BANK_COUNT)) ? 1 : 0;
int bank_flag = (is_ro ? EC_FLASH_PROTECT_RO_NOW :
EC_FLASH_PROTECT_ALL_NOW);
if (flash_physical_get_protect(i)) {
/* At least one bank in the region is protected */
flags |= bank_flag;
if (not_protected[is_ro])
flags |= EC_FLASH_PROTECT_ERROR_INCONSISTENT;
} else {
/* At least one bank in the region is NOT protected */
not_protected[is_ro] = 1;
if (flags & bank_flag)
flags |= EC_FLASH_PROTECT_ERROR_INCONSISTENT;
}
}
/*
* If the RW banks are protected but the RO banks aren't, that's
* inconsistent.
*
* Note that we check this before adding in the physical flags below,
* since some chips can also protect ALL_NOW for the current boot by
* locking up the flash program-erase registers.
*/
if ((flags & EC_FLASH_PROTECT_ALL_NOW) &&
!(flags & EC_FLASH_PROTECT_RO_NOW))
flags |= EC_FLASH_PROTECT_ERROR_INCONSISTENT;
/* Add in flags from physical layer */
return flags | flash_physical_get_protect_flags();
}
int flash_set_protect(uint32_t mask, uint32_t flags)
{
int retval = EC_SUCCESS;
int rv;
/*
* Process flags we can set. Track the most recent error, but process
* all flags before returning.
*/
if (mask & EC_FLASH_PROTECT_RO_AT_BOOT) {
rv = flash_protect_ro_at_boot(
flags & EC_FLASH_PROTECT_RO_AT_BOOT);
if (rv)
retval = rv;
}
/*
* All subsequent flags only work if write protect is enabled (that is,
* hardware WP flag) *and* RO is protected at boot (software WP flag).
*/
if ((~flash_get_protect()) & (EC_FLASH_PROTECT_GPIO_ASSERTED |
EC_FLASH_PROTECT_RO_AT_BOOT))
return retval;
if ((mask & EC_FLASH_PROTECT_RO_NOW) &&
(flags & EC_FLASH_PROTECT_RO_NOW)) {
rv = flash_physical_protect_now(0);
if (rv)
retval = rv;
}
if ((mask & EC_FLASH_PROTECT_ALL_NOW) &&
(flags & EC_FLASH_PROTECT_ALL_NOW)) {
rv = flash_physical_protect_now(1);
if (rv)
retval = rv;
}
return retval;
}
/*****************************************************************************/
/* Console commands */
/**
* Parse offset and size from command line argv[shift] and argv[shift+1]
*
* Default values: If argc<=shift, leaves offset unchanged, returning error if
* *offset<0. If argc<shift+1, leaves size unchanged, returning error if
* *size<0.
*/
static int parse_offset_size(int argc, char **argv, int shift,
int *offset, int *size)
{
char *e;
int i;
if (argc > shift) {
i = (uint32_t)strtoi(argv[shift], &e, 0);
if (*e)
return EC_ERROR_PARAM1;
*offset = i;
} else if (*offset < 0)
return EC_ERROR_PARAM_COUNT;
if (argc > shift + 1) {
i = (uint32_t)strtoi(argv[shift + 1], &e, 0);
if (*e)
return EC_ERROR_PARAM2;
*size = i;
} else if (*size < 0)
return EC_ERROR_PARAM_COUNT;
return EC_SUCCESS;
}
static int command_flash_info(int argc, char **argv)
{
int i;
ccprintf("Physical:%4d KB\n", CONFIG_FLASH_PHYSICAL_SIZE / 1024);
ccprintf("Usable: %4d KB\n", CONFIG_FLASH_SIZE / 1024);
ccprintf("Write: %4d B (ideal %d B)\n", CONFIG_FLASH_WRITE_SIZE,
CONFIG_FLASH_WRITE_IDEAL_SIZE);
ccprintf("Erase: %4d B (to %d-bits)\n", CONFIG_FLASH_ERASE_SIZE,
CONFIG_FLASH_ERASED_VALUE32 ? 1 : 0);
ccprintf("Protect: %4d B\n", CONFIG_FLASH_BANK_SIZE);
i = flash_get_protect();
ccprintf("Flags: ");
if (i & EC_FLASH_PROTECT_GPIO_ASSERTED)
ccputs(" wp_gpio_asserted");
if (i & EC_FLASH_PROTECT_RO_AT_BOOT)
ccputs(" ro_at_boot");
if (i & EC_FLASH_PROTECT_ALL_AT_BOOT)
ccputs(" all_at_boot");
if (i & EC_FLASH_PROTECT_RO_NOW)
ccputs(" ro_now");
if (i & EC_FLASH_PROTECT_ALL_NOW)
ccputs(" all_now");
if (i & EC_FLASH_PROTECT_ERROR_STUCK)
ccputs(" STUCK");
if (i & EC_FLASH_PROTECT_ERROR_INCONSISTENT)
ccputs(" INCONSISTENT");
ccputs("\n");
ccputs("Protected now:");
for (i = 0; i < CONFIG_FLASH_PHYSICAL_SIZE / CONFIG_FLASH_BANK_SIZE;
i++) {
if (!(i & 31))
ccputs("\n ");
else if (!(i & 7))
ccputs(" ");
ccputs(flash_physical_get_protect(i) ? "Y" : ".");
}
ccputs("\n");
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(flashinfo, command_flash_info,
NULL,
"Print flash info",
NULL);
static int command_flash_erase(int argc, char **argv)
{
int offset = -1;
int size = CONFIG_FLASH_ERASE_SIZE;
int rv;
if (flash_get_protect() & EC_FLASH_PROTECT_ALL_NOW)
return EC_ERROR_ACCESS_DENIED;
rv = parse_offset_size(argc, argv, 1, &offset, &size);
if (rv)
return rv;
ccprintf("Erasing %d bytes at 0x%x...\n", size, offset, offset);
return flash_erase(offset, size);
}
DECLARE_CONSOLE_COMMAND(flasherase, command_flash_erase,
"offset [size]",
"Erase flash",
NULL);
static int command_flash_write(int argc, char **argv)
{
int offset = -1;
int size = CONFIG_FLASH_ERASE_SIZE;
int rv;
char *data;
int i;
if (flash_get_protect() & EC_FLASH_PROTECT_ALL_NOW)
return EC_ERROR_ACCESS_DENIED;
rv = parse_offset_size(argc, argv, 1, &offset, &size);
if (rv)
return rv;
if (size > shared_mem_size())
size = shared_mem_size();
/* Acquire the shared memory buffer */
rv = shared_mem_acquire(size, &data);
if (rv) {
ccputs("Can't get shared mem\n");
return rv;
}
/* Fill the data buffer with a pattern */
for (i = 0; i < size; i++)
data[i] = i;
ccprintf("Writing %d bytes to 0x%x...\n",
size, offset, offset);
rv = flash_write(offset, size, data);
/* Free the buffer */
shared_mem_release(data);
return rv;
}
DECLARE_CONSOLE_COMMAND(flashwrite, command_flash_write,
"offset [size]",
"Write pattern to flash",
NULL);
static int command_flash_wp(int argc, char **argv)
{
if (argc < 2)
return EC_ERROR_PARAM_COUNT;
if (!strcasecmp(argv[1], "enable"))
return flash_set_protect(EC_FLASH_PROTECT_RO_AT_BOOT, -1);
else if (!strcasecmp(argv[1], "disable"))
return flash_set_protect(EC_FLASH_PROTECT_RO_AT_BOOT, 0);
else if (!strcasecmp(argv[1], "now"))
return flash_set_protect(EC_FLASH_PROTECT_ALL_NOW, -1);
else if (!strcasecmp(argv[1], "rw"))
return flash_set_protect(EC_FLASH_PROTECT_ALL_AT_BOOT, -1);
else if (!strcasecmp(argv[1], "norw"))
return flash_set_protect(EC_FLASH_PROTECT_ALL_AT_BOOT, 0);
else
return EC_ERROR_PARAM1;
}
DECLARE_CONSOLE_COMMAND(flashwp, command_flash_wp,
"<enable | disable | now | rw | norw>",
"Modify flash write protect",
NULL);
/*****************************************************************************/
/* Host commands */
static int flash_command_get_info(struct host_cmd_handler_args *args)
{
struct ec_response_flash_info_1 *r = args->response;
r->flash_size = CONFIG_FLASH_SIZE;
r->write_block_size = CONFIG_FLASH_WRITE_SIZE;
r->erase_block_size = CONFIG_FLASH_ERASE_SIZE;
r->protect_block_size = CONFIG_FLASH_BANK_SIZE;
if (args->version == 0) {
/* Only version 0 fields returned */
args->response_size = sizeof(struct ec_response_flash_info);
} else {
/* Fill in full version 1 struct */
/*
* Compute the ideal amount of data for the host to send us,
* based on the maximum response size and the ideal write size.
*/
r->write_ideal_size =
(args->response_max -
sizeof(struct ec_params_flash_write)) &
~(CONFIG_FLASH_WRITE_IDEAL_SIZE - 1);
/*
* If we can't get at least one ideal block, then just want
* as high a multiple of the minimum write size as possible.
*/
if (!r->write_ideal_size)
r->write_ideal_size =
(args->response_max -
sizeof(struct ec_params_flash_write)) &
~(CONFIG_FLASH_WRITE_SIZE - 1);
r->flags = 0;
#if (CONFIG_FLASH_ERASED_VALUE32 == 0)
r->flags |= EC_FLASH_INFO_ERASE_TO_0;
#endif
args->response_size = sizeof(*r);
}
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_FLASH_INFO,
flash_command_get_info,
EC_VER_MASK(0) | EC_VER_MASK(1));
static int flash_command_read(struct host_cmd_handler_args *args)
{
const struct ec_params_flash_read *p = args->params;
const char *src;
if (flash_dataptr(p->offset, p->size, 1, &src) < 0)
return EC_RES_ERROR;
if (p->size > args->response_max)
return EC_RES_OVERFLOW;
memcpy(args->response, src, p->size);
args->response_size = p->size;
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_FLASH_READ,
flash_command_read,
EC_VER_MASK(0));
/**
* Flash write command
*
* Version 0 and 1 are equivalent from the EC-side; the only difference is
* that the host can only send 64 bytes of data at a time in version 0.
*/
static int flash_command_write(struct host_cmd_handler_args *args)
{
const struct ec_params_flash_write *p = args->params;
if (flash_get_protect() & EC_FLASH_PROTECT_ALL_NOW)
return EC_RES_ACCESS_DENIED;
if (p->size + sizeof(*p) > args->params_size)
return EC_RES_INVALID_PARAM;
if (system_unsafe_to_overwrite(p->offset, p->size))
return EC_RES_ACCESS_DENIED;
if (flash_write(p->offset, p->size, (const uint8_t *)(p + 1)))
return EC_RES_ERROR;
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_FLASH_WRITE,
flash_command_write,
EC_VER_MASK(0) | EC_VER_MASK(EC_VER_FLASH_WRITE));
static int flash_command_erase(struct host_cmd_handler_args *args)
{
const struct ec_params_flash_erase *p = args->params;
if (flash_get_protect() & EC_FLASH_PROTECT_ALL_NOW)
return EC_RES_ACCESS_DENIED;
if (system_unsafe_to_overwrite(p->offset, p->size))
return EC_RES_ACCESS_DENIED;
/* Indicate that we might be a while */
#if defined(HAS_TASK_HOSTCMD) && defined(CONFIG_HOST_COMMAND_STATUS)
args->result = EC_RES_IN_PROGRESS;
host_send_response(args);
#endif
if (flash_erase(p->offset, p->size))
return EC_RES_ERROR;
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_FLASH_ERASE,
flash_command_erase,
EC_VER_MASK(0));
static int flash_command_protect(struct host_cmd_handler_args *args)
{
const struct ec_params_flash_protect *p = args->params;
struct ec_response_flash_protect *r = args->response;
/*
* Handle requesting new flags. Note that we ignore the return code
* from flash_set_protect(), since errors will be visible to the caller
* via the flags in the response. (If we returned error, the caller
* wouldn't get the response.)
*/
if (p->mask)
flash_set_protect(p->mask, p->flags);
/*
* Retrieve the current flags. The caller can use this to determine
* which of the requested flags could be set. This is cleaner than
* simply returning error, because it provides information to the
* caller about the actual result.
*/
r->flags = flash_get_protect();
/* Indicate which flags are valid on this platform */
r->valid_flags =
EC_FLASH_PROTECT_GPIO_ASSERTED |
EC_FLASH_PROTECT_ERROR_STUCK |
EC_FLASH_PROTECT_RO_AT_BOOT |
EC_FLASH_PROTECT_RO_NOW |
EC_FLASH_PROTECT_ALL_NOW |
EC_FLASH_PROTECT_ERROR_INCONSISTENT;
r->writable_flags = 0;
/* If RO protection isn't enabled, its at-boot state can be changed. */
if (!(r->flags & EC_FLASH_PROTECT_RO_NOW))
r->writable_flags |= EC_FLASH_PROTECT_RO_AT_BOOT;
#ifdef CHIP_FAMILY_STM32F
/*
* TODO(crosbug.com/p/23762): Should ignore all-now on STM32F if WP
* isn't asserted. We don't do this due to limitations in early snow
* boards (lack of WP GPIO?) - in which case, this can either be
* restricted to BOARD_SNOW, or removed entirely.
*/
r->valid_flags |= EC_FLASH_PROTECT_ALL_NOW;
r->writable_flags |= EC_FLASH_PROTECT_ALL_NOW;
#else
/*
* If entire flash isn't protected at this boot, it can be enabled if
* the WP GPIO is asserted.
*/
if (!(r->flags & EC_FLASH_PROTECT_ALL_NOW) &&
(r->flags & EC_FLASH_PROTECT_GPIO_ASSERTED))
r->writable_flags |= EC_FLASH_PROTECT_ALL_NOW;
#endif
args->response_size = sizeof(*r);
return EC_RES_SUCCESS;
}
/*
* TODO(crbug.com/239197) : Adding both versions to the version mask is a
* temporary workaround for a problem in the cros_ec driver. Drop
* EC_VER_MASK(0) once cros_ec driver can send the correct version.
*/
DECLARE_HOST_COMMAND(EC_CMD_FLASH_PROTECT,
flash_command_protect,
EC_VER_MASK(0) | EC_VER_MASK(1));
static int flash_command_region_info(struct host_cmd_handler_args *args)
{
const struct ec_params_flash_region_info *p = args->params;
struct ec_response_flash_region_info *r = args->response;
switch (p->region) {
case EC_FLASH_REGION_RO:
r->offset = CONFIG_FW_RO_OFF;
r->size = CONFIG_FW_RO_SIZE;
break;
case EC_FLASH_REGION_RW:
r->offset = CONFIG_FW_RW_OFF;
r->size = CONFIG_FW_RW_SIZE;
break;
case EC_FLASH_REGION_WP_RO:
r->offset = CONFIG_FW_WP_RO_OFF;
r->size = CONFIG_FW_WP_RO_SIZE;
break;
default:
return EC_RES_INVALID_PARAM;
}
args->response_size = sizeof(*r);
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_FLASH_REGION_INFO,
flash_command_region_info,
EC_VER_MASK(EC_VER_FLASH_REGION_INFO));