Daisuke Nojiri 760c89fe37 Fizz: Set up charge suppliers at boot ...

Fizz has two power sources: barrel jack and type-c port. It
selects a power source at boot and does not dynamicall switch
to the other ports after that.

Fizz initializes all power suppliers of all ports to zero then
initialize the source supplier (barrel jack or type-c port).

When both sources are provided, it prefers a barrel jack. This
detection is done by reading the voltage on PPVAR_PWR_IN.

If barrel jack is detected as a sink, type-c port works as a
source only. If type-c port is detected as a sink, type-c
port works as a sink only.

Fizz does not have a battery. So, battery module is removed.

BUG=b:37573548,b:37316498
BRANCH=none
TEST=Boot on both type-c & barrel jack.

Change-Id: If4f5ff0c6019d06ac9dacb5dd365f5aa96bffef3
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/499547

2017-05-17 19:06:31 -07:00

..

apollolake.c

intel_x86: Handle RSMRST signal in Intel x86 common code

2017-01-21 10:03:45 -08:00

apollolake.h

power: Group Intel x86 power sequencing common code

2017-01-20 22:40:32 -08:00

braswell.c

kunimitsu: hibernate: enable PseudoG3 support at board level

2016-02-18 17:35:16 -08:00

build.mk

kahlee: initial board setting

2017-04-05 19:55:13 -07:00

common.c

Apollolake: Enter/exit from S0ix based on host commands from kernel

2016-11-17 16:09:44 -08:00

ec_driven.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

gaia.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

intel_x86.c

Fizz: Set up charge suppliers at boot

2017-05-17 19:06:31 -07:00

intel_x86.h

intel_x86: Handle RSMRST signal in Intel x86 common code

2017-01-21 10:03:45 -08:00

mediatek.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

rk3399.c

power: rk3399: Wake from S3 on power button press rather than shutdown

2016-12-01 19:58:55 -08:00

rockchip.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

skylake.c

power/skylake: Use power_get_signals instead of power_has_signals

2017-02-18 03:11:00 -08:00

skylake.h

power: Group Intel x86 power sequencing common code

2017-01-20 22:40:32 -08:00

stoney.c

kahlee: initial board setting

2017-04-05 19:55:13 -07:00

stoney.h

kahlee: initial board setting

2017-04-05 19:55:13 -07:00

tegra.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00