Yen Lin 6b5fcc6931 ec: Add Puppy support to generic/common files ...

add #ifdefs needed to support Puppy board in generic/common files

BUG=none
TEST=tested on Venice board

Change-Id: I46592010cb5dfcc40db312c746f1e0d2886b3758
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/60688
Reviewed-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>

2013-07-03 14:22:19 -07:00

..

battery_bq20z453.c

Support battery cut-off mechanism for factory.

2012-08-28 04:39:56 -07:00

battery_falco.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

battery_link.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

battery_peppy.c

Add charger/battery support for Peppy

2013-06-24 14:03:52 -07:00

battery_precharge.c

Add reinit state to charge_state module to distinguish it from at-ec-boot init

2013-02-28 16:12:05 -08:00

battery_slippy.c

Slippy: Adjust battery voltages to be closer to reality.

2013-06-12 15:01:01 -07:00

battery_spring.c

spring: Guard battery cut-off command with lock

2013-06-05 11:25:10 -07:00

build.mk

Power and battery LED control for Peppy.

2013-06-24 14:04:04 -07:00

charge_state.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

charger_bq24707a.c

Enable ADC charger current monitor for Slippy

2013-06-07 13:13:48 -07:00

charger_bq24725.c

Add support for TI's Smart Battery Charger BQ24707A

2013-06-07 10:52:11 -07:00

charger_bq24738.c

Falco: Disable IFAULT_HI on the BQ24738 charger

2013-06-13 15:52:29 -07:00

charger_common.c

Add support for TI's Smart Battery Charger BQ24707A

2013-06-07 10:52:11 -07:00

chipset.c

Move common chipset console commands to chipset.c

2013-04-24 09:58:22 -07:00

console_output.c

Move files in preparation for merging keyboard_scan modules

2013-03-27 11:35:20 -07:00

console.c

Accept a command if it's a full match

2013-06-05 11:25:09 -07:00

eoption.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

extpower_gpio.c

Move enabling AC_PRESENT interrupt to extpower_gpio.c

2013-04-02 14:12:56 -07:00

extpower_snow.c

Add common implementation for daisy/snow extpower_is_present

2013-04-03 11:49:07 -07:00

extpower_usb.c

spring: Wait 80ms for CABLE_DET to be asserted

2013-06-22 22:30:08 -07:00

firmware_image.lds.S

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

firmware_image.S

Remove firmware B

2012-07-17 13:11:44 -07:00

flash_common.c

Allow bigger flash write commands

2013-07-01 16:14:16 -07:00

fmap.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

gaia_power.c

ec: Add Puppy support to generic/common files

2013-07-03 14:22:19 -07:00

gpio_common.c

Move gpio_get_name() to gpio_common.c

2013-04-11 15:38:08 -07:00

hooks.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

host_command.c

Add new hcdebug modes to skip printing duplicate host commands

2013-07-02 09:32:45 -07:00

host_event_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

i2c_arbitration.c

Move I2C arbitration to its own file

2013-03-20 15:23:29 -07:00

i2c_common.c

stm32: Add CHIP_FAMILY defines

2013-07-01 10:19:49 -07:00

ir357x.c

Hook functions no longer return values

2012-10-23 16:49:29 -07:00

keyboard_8042.c

keyboard: Preserve keystroke enable state.

2013-06-24 15:44:24 -07:00

keyboard_mkbp.c

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

keyboard_scan.c

do not store the keyboard state on the stack

2013-05-14 10:17:13 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

led_falco.c

Falco, Peppy: Set LED to indicate battery charged when near full

2013-07-02 10:18:22 -07:00

led_peppy.c

Falco, Peppy: Set LED to indicate battery charged when near full

2013-07-02 10:18:22 -07:00

lid_switch.c

Add lid switch test and enable kb_mkbp test

2013-05-08 13:24:19 -07:00

lightbar.c

Split pwm.c into pwm_fan.c and pwm_kblight.c

2013-04-26 16:07:21 -07:00

lp5562_battery_led.c

spring: Show green LED when 94% charged

2013-06-13 22:16:06 -07:00

lp5562.c

Add LP5562 functions to control engine execution state

2013-04-23 10:39:13 -07:00

main.c

Pthread-based emulator for unit testing

2013-05-07 09:09:50 -07:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

mock_charger.c

Add a test of charging state machine

2012-07-08 20:25:17 -07:00

mock_i8042.c

Rename I8042CMD task to KEYPROTO

2013-03-29 15:39:32 -07:00

mock_smart_battery_stub.c

Add a test of charging state machine

2012-07-08 20:25:17 -07:00

mock_temp_sensor.c

Use SECOND and MSEC constants

2012-10-29 16:52:49 -07:00

mock_x86_power.c

Add parse_bool() to centralize parsing boolean options

2013-03-29 15:39:34 -07:00

onewire_led.c

Rename onewire_led functions and constants

2013-04-05 14:28:49 -07:00

pmu_tps65090_charger.c

Reset charge state machine on charge timeout

2013-05-20 10:54:00 -07:00

pmu_tps65090.c

ec: Add Puppy support to generic/common files

2013-07-03 14:22:19 -07:00

port80.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

power_button.c

Split out power button code from switch.c

2013-04-25 17:03:18 -07:00

printf.c

Clean up printf module

2012-10-25 14:12:10 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

queue.c

Only waste 1 byte in queue buffer

2013-06-10 01:48:44 -07:00

sha256.c

Clean up vboot hash support

2012-10-25 17:03:44 -07:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smart_battery_stub.c

Stub smart battery read/write functions

2012-06-27 03:22:17 -07:00

smart_battery.c

Improve 'sb' command, add 'sbc' command

2013-06-07 10:52:13 -07:00

system_common.c

EC_CMD_GET_BUILD_INFO only appends a single terminating null

2013-07-01 10:19:50 -07:00

temp_sensor.c

Revert "Revert "Add thermal engine test""

2013-05-17 09:52:26 -07:00

test_util.c

A method to mock host command

2013-06-17 20:27:27 -07:00

thermal.c

Revert "Revert "Add thermal engine test""

2013-05-17 09:52:26 -07:00

tmp006.c

Handle bus errors on thermal I2C bus

2012-11-26 14:49:49 -08:00

tsu6721.c

Clear pending interrupt on disabling TSU6721 interrupt

2013-06-22 22:30:04 -07:00

uart_buffering.c

Software flow control in console

2013-04-23 10:39:09 -07:00

usb_port_power_dumb.c

usb: Disable ports on entry to S5

2013-05-22 12:29:20 -07:00

usb_port_power_smart.c

Split the USB port power control into smart and dumb versions.

2013-05-01 15:36:22 -07:00

util.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

vboot_hash.c

Invalidate hash if flash operation changes the hashed region

2012-12-10 15:14:38 -08:00

version.c

update versioning information stored in the EC

2012-03-02 16:46:26 +00:00

x86_power_haswell.c

haswell: fix RCIN_L leakage

2013-07-02 13:34:08 -07:00

x86_power_ivybridge.c

Split x86_power.c into Ivybridge and Haswell variants

2013-04-30 19:03:03 -07:00