Todd Broch 42faec2124 mcdp28x0: Add devid console command. ...

BRANCH=samus
BUG=chrome-os-partner:35939
TEST=manual, with CONFIG_CMD_MCDP in board/hoho/board.h

> mcdp devid 0
devid[0] = BOBCAT
> mcdp devid 1
devid[1] = ST
> mcdp devid 2
devid[2] = IROM

Change-Id: I82938975be55bb924ced06e9d0a35f03dc47ae99
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/272693
Reviewed-by: Alec Berg <alecaberg@chromium.org>

2015-05-22 22:48:17 +00:00

..

battery

Skip the battery device name reading on BQ27742

2015-03-26 19:56:11 +00:00

charger

bq24770: Corrected charger driver used an incorrect SMBUS address.

2015-04-29 18:40:48 +00:00

led

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

temp_sensor

samus: new algorithm for tmp006 object temperature

2014-10-22 00:30:31 +00:00

accel_kxcj9.c

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

accel_kxcj9.h

samus: added gyro support for lsm6ds0

2014-08-26 03:05:55 +00:00

accelgyro_bmi160.c

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

accelgyro_bmi160.h

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

accelgyro_lsm6ds0.c

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

accelgyro_lsm6ds0.h

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

als_isl29035.c

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

als_isl29035.h

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

build.mk

driver: Add BMI160 basic driver support

2015-05-12 23:35:56 +00:00

ina2xx.c

Extend INA231 driver to support INA219 on Plankton

2014-10-18 07:38:30 +00:00

ina2xx.h

Extend INA231 driver to support INA219 on Plankton

2014-10-18 07:38:30 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

mag_bmm150.h

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

mcdp28x0.c

mcdp28x0: Add devid console command.

2015-05-22 22:48:17 +00:00

mcdp28x0.h

mcdp28x0: Add devid console command.

2015-05-22 22:48:17 +00:00

pi3usb9281.h

pi3usb9281: Always set reserved control bits

2015-03-04 22:08:09 +00:00

regulator_ir357x.c

cprints: Revert some changes from CPRINTF to CPRINTS

2014-07-03 02:52:35 +00:00

tsu6721.h

tsu6721: add function to control output pins

2014-06-13 03:12:45 +00:00

usb_switch_pi3usb9281.c

pi3usb9281: Always set reserved control bits

2015-03-04 22:08:09 +00:00

usb_switch_tsu6721.c

tsu6721: add function to control output pins

2014-06-13 03:12:45 +00:00