Rong Chang 2eabf6fe8c oak_pd: tcpm_power_status: Update power status on init ...

Oak board relies on TCPCI power status. When board init, PD should
update it's VBUS status and TCPM needs to get power status after enable
TCPC power status mask.

BRANCH=none
BUG=chrome-os-partner:44952
TEST=manual
  build and load on oak, disconnect battery.
  power on system with zinger, and check PD state.

Signed-off-by: Rong Chang <rongchang@chromium.org>
Change-Id: Ic0d4b50d38ac39ff31b3a257c4b3b5dde0ebda4b
Reviewed-on: https://chromium-review.googlesource.com/297871
Reviewed-by: Alec Berg <alecaberg@chromium.org>

2015-09-14 00:48:39 -07:00

..

acpi.c

acpi: Ensure continuity of memmap data with a read cache

2015-07-28 21:31:38 +00:00

adc.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

als.c

als: Disable task when host is not running

2015-09-10 12:35:37 -07:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

blob.c

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

build.mk

common: Add variable to enable software gesture recognition.

2015-09-11 13:50:56 -07:00

button.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

charge_manager.c

charge_manager: do not allow overlapping charge override commands

2015-09-09 11:17:45 -07:00

charge_ramp.c

charger: Move USB charger / BC1.2 task to common code

2015-06-10 19:48:08 +00:00

charge_state_v1.c

cleanup: remove board_discharge_on_ac() unless custom func needed

2015-07-14 22:39:36 +00:00

charge_state_v2.c

Revert "Trigger lightbar pattern from charger task if necessary"

2015-08-13 21:41:18 +00:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

tpm: add a console channel for TPM subsystem

2015-07-25 08:47:31 +00:00

console.c

Only process console input after console task started

2015-01-17 23:19:58 +00:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

extpower_gpio.c

Initialize the memory-mapped AC_PRESENT flag

2015-05-28 03:18:06 +00:00

fan.c

acpi: Ensure continuity of memmap data with a read cache

2015-07-28 21:31:38 +00:00

firmware_image.lds.S

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

firmware_image.S

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

flash.c

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

fmap.c

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

gesture.c

samus: Use new config, fix gesture

2015-08-29 01:34:15 -07:00

gpio.c

I2C: i2c_raw_mode() should only touch I2C port specified

2015-07-25 14:49:31 +00:00

hooks.c

hooks: Move HOOK_INIT to after task switching.

2015-07-13 18:43:56 +00:00

host_command_master.c

pd: Add timeout for HC flash commands.

2015-01-07 08:45:38 +00:00

host_command_pd.c

host_command_pd: loop over sending PD status host command

2015-07-29 06:38:45 +00:00

host_command.c

acpi: Ensure continuity of memmap data with a read cache

2015-07-28 21:31:38 +00:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

i2c: Fix i2c_lock deadlock on sysjump

2015-08-22 01:37:51 +00:00

inductive_charging.c

ryu: improve inductive charging control

2015-01-30 05:11:06 +00:00

keyboard_8042_sharedlib.c

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.c

Keyboard: Add a macro to conditionally compile the console commands

2015-08-28 18:09:06 -07:00

keyboard_mkbp.c

oak: enable MBKP events for PD events

2015-08-31 22:59:52 -07:00

keyboard_scan.c

Keyboard: Add a macro to conditionally compile the console commands

2015-08-28 18:09:06 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: re-calibrate lightbar colors for device.

2015-08-21 00:49:26 +00:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

Standard Power/Charging LED Behavior

2015-01-14 21:49:36 +00:00

lid_angle.c

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.c

lid_switch: allow to specify several lid GPIOs

2015-07-23 22:38:06 +00:00

lightbar.c

ryu: re-calibrate lightbar colors for device.

2015-08-21 00:49:26 +00:00

main.c

eoption: Remove unused eeprom option storage code

2015-09-08 18:43:47 -07:00

math_util.c

math: Add inverse matrix calculation

2015-08-24 19:08:20 +00:00

memory_commands.c

cli: add ability to read/write memory of different bus width

2015-05-02 03:39:37 +00:00

mkbp_event.c

ryu: enable MBKP events for PD events

2015-05-28 23:02:18 +00:00

motion_lid.c

cyan: fix sensors matrices

2015-08-22 01:37:55 +00:00

motion_sense.c

common: Add variable to enable software gesture recognition.

2015-09-11 13:50:56 -07:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

panic: Fix unaligned memory access panic

2015-04-14 01:15:43 +00:00

pd_log.c

pd: move non-phy layer config out of usb_pd_config.h

2015-05-27 02:39:41 +00:00

pmu_tps65090_charger.c

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

pmu_tps65090_powerinfo.c

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

pmu_tps65090.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

port80.c

port80: Disable port80 task when leaving S0

2015-07-15 02:06:48 +00:00

power_button_x86.c

skylake: Use a simulated power button press to force-shutdown the AP

2015-06-04 01:15:55 +00:00

power_button.c

Power Button: Wait for power button to be stable when waiting for release

2015-02-10 23:07:14 +00:00

printf.c

optimize printf size without the common runtime

2015-04-10 23:29:27 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue_policies.c

Stream: Remove in_stream/out_stream interface

2015-06-11 00:08:49 +00:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

Update some TODO comments.

2015-09-03 15:11:45 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

samus_pd: make shmem command optional, disable on samus_pd

2015-02-24 00:27:42 +00:00

smbus.c

smbus: Don't use shared memory buffer for word writes

2015-02-04 23:32:42 +00:00

spi_flash_reg.c

cyan: fix issues with write protection

2015-07-16 18:47:22 +00:00

spi_flash.c

common: change interface to SPI flash

2015-07-30 19:57:55 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

pd: send soft reset before an EC reset

2015-09-01 16:10:43 -07:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

emulator: Keep fail count across sysjump

2014-01-08 03:49:36 +00:00

thermal.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

UART: Remove unused uart.h header includes

2015-09-08 10:38:20 -07:00

tpm_registers.c

Cr50: Build external libs remotely, but put objects here

2015-08-22 01:37:25 +00:00

uart_buffering.c

uart: provide polling mode of operation

2015-08-08 04:26:40 +00:00

usb_charger.c

oak: handle USB BC 1.2 status change

2015-09-03 04:24:34 -07:00

usb_pd_policy.c

usb_pd: Add host command to limit external charger voltage / current

2015-08-22 01:37:38 +00:00

usb_pd_protocol.c

pd: add swap commands to USB_PD_CONTROL host command

2015-09-11 13:51:00 -07:00

usb_pd_tcpc.c

oak_pd: tcpm_power_status: Update power status on init

2015-09-14 00:48:39 -07:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

vboot_hash.c

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

version.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00