Vijay Hiremath 313355302b Driver: BD99955: Enable BC1.2 support ...

BUG=none
BRANCH=none
TEST=Manually tested on Amenia.
     Connected Zinger, Type-C, DCP & CDP chargers. Device can negotiate
     to desired current & voltage and the battery can charge.
     USB2.0 sync device is detected by Kernel.

Change-Id: I58cb69289eef9a966e06bef8fe31d35beaec5e27
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/341030
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-05-24 15:46:01 -07:00

..

acpi.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

adc.c

stm32: adc: Add support for DMA continuous mode

2015-12-21 14:58:56 -08:00

als.c

ALS: wake up ALS task when switched to RW mode

2015-12-11 11:22:01 -08:00

ap_hang_detect.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

build.mk

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

button.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

capsense.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

case_closed_debug.c

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

charge_manager.c

Driver: BD99955: Enable BC1.2 support

2016-05-24 15:46:01 -07:00

charge_ramp.c

Driver: BD99955: Enable BC1.2 support

2016-05-24 15:46:01 -07:00

charge_state_v1.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

charge_state_v2.c

pd: Fix multiple reboot for battery cut-off

2016-04-13 18:37:18 -07:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

Console: Fix channel enum values

2016-03-22 19:54:46 -07:00

console.c

common: console: Change console_init() string.

2016-02-23 22:40:17 -08:00

crc8.c

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

extension.c

add the 'extension' command framework

2015-11-17 14:40:26 -08:00

extpower_gpio.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

fan.c

Fan: enable fan after system resume

2016-03-30 04:37:39 -07:00

firmware_image.lds.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

firmware_image.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

flash.c

cleanup: Remove superfluous #defines

2015-09-25 18:05:27 -07:00

fmap.c

fmap: note fmap_name dependency

2016-02-08 13:47:49 -08:00

gesture.c

gesture: fix double tap doesn't always work in suspend

2015-09-29 11:28:40 -07:00

gpio_commands.c

servo_micro: add gpio mode get and set

2016-04-27 14:04:07 -07:00

gpio.c

servo_micro: add gpio mode get and set

2016-04-27 14:04:07 -07:00

hooks.c

Deferred: Remove hard coded number of deferreds

2016-04-19 12:23:52 -07:00

host_command_master.c

common: host_command_master: Add buf to .bss.slow.

2015-11-09 12:49:43 -08:00

host_command_pd.c

tcpm: update code to support multiple tcpm driver

2016-04-17 12:23:07 -07:00

host_command.c

cleanup: Remove usb_switch_tsu6721 driver

2016-05-13 23:34:51 -07:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

common: Fix sleep mask for multi-port lock.

2016-02-04 19:15:06 -08:00

inductive_charging.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

keyboard_8042_sharedlib.c

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.c

Keyboard: Add a macro to conditionally compile the console commands

2015-08-28 18:09:06 -07:00

keyboard_mkbp.c

oak: enable MBKP events for PD events

2015-08-31 22:59:52 -07:00

keyboard_scan.c

ectool: Support keyboard factory scanning

2016-04-01 00:21:35 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: fix max lightbar brightness

2015-09-25 09:13:34 -07:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

LED: add green/red support for host commands

2016-05-18 15:08:28 -07:00

lid_angle.c

oak: enable lid angle update

2016-03-02 13:39:47 -08:00

lid_switch.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

lightbar.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

system: Add support to reclaim space from loader.

2015-10-13 21:58:01 -07:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

oak: Add kx022 lid accelerometer for rev5.

2016-03-01 08:25:58 -08:00

memory_commands.c

console: Put additional console commands behind CONFIGs

2016-04-03 10:27:36 -07:00

mkbp_event.c

mkbp_event: prevent unnecessary interrupts to AP

2016-03-10 06:03:08 -08:00

motion_lid.c

ectool: provide lid angle info

2015-11-25 18:15:38 -08:00

motion_sense.c

motion: Set interrupt interval properly for sensor in force mode

2015-12-01 01:11:11 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

Kunimitsu: remove console commands for code size

2016-04-14 17:28:17 -07:00

pd_log.c

common: pd_log: Add PD log to .bss.slow.

2015-11-08 10:07:38 -08:00

port80.c

common: port80: Add items to .bss.slow.

2015-11-11 12:58:37 -08:00

power_button_x86.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

power_button.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

printf.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

pwm.c

pwm: Add generic PWM control host commands

2016-05-11 18:24:30 -07:00

queue_policies.c

Stream: Remove in_stream/out_stream interface

2015-06-11 00:08:49 +00:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

cleanup: Handle signed RW images a bit cleaner

2015-09-25 19:36:37 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

common: Drop unused data structure

2016-05-05 19:16:50 -07:00

shared_mem.c

samus_pd: make shmem command optional, disable on samus_pd

2015-02-24 00:27:42 +00:00

smbus.c

smbus: Re-write smbus driver

2016-03-21 16:35:33 -07:00

spi_commands.c

common: spi: Add a delay after write commands.

2015-11-19 02:18:10 -08:00

spi_flash_reg.c

spi_flash: Add protect_range table for W25Q40

2016-05-19 18:18:05 -07:00

spi_flash.c

spi_flash: print spi flash size in proper unit

2016-03-30 17:10:17 -07:00

spi_nor.c

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

switch.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

system.c

Support RW_B in sysjump command when applicable

2016-04-08 12:34:29 -07:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

thermal.c

Fan: Allow fan at max speed during the boot time.

2015-12-03 02:22:01 -08:00

throttle_ap.c

Kunimitsu: remove console commands for code size

2016-04-14 17:28:17 -07:00

timer.c

common: Add __fls function

2015-09-21 01:13:54 -07:00

tpm_registers.c

tpm_regs: clean up debug messages

2016-04-27 18:12:25 -07:00

uart_buffering.c

UART: Remove X-on/X-off flow control

2016-04-27 10:10:02 -07:00

usb_charger.c

usb_charger: Move part-specific code to usb_switch driver

2016-05-13 23:34:51 -07:00

usb_pd_policy.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb_pd_protocol.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb_pd_tcpc.c

pd: Fix port enable check for low power idle

2016-04-25 21:04:41 -07:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

usb_port_power_smart: Support variable port count

2016-03-24 00:03:07 -07:00

util.c

CR50: move utility method reverse() to common/util.c

2016-03-07 21:56:04 -08:00

vboot_hash.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

Make builds repeatable.

2015-09-24 12:46:28 -07:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00