OpenCellular/board/spring/board.c

/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */
/* Spring board-specific configuration */

#include "adc.h"
#include "adc_chip.h"
#include "board_config.h"
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "extpower.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "keyboard_raw.h"
#include "lid_switch.h"
#include "pmu_tpschrome.h"
#include "power.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "registers.h"
#include "timer.h"
#include "util.h"

#define GPIO_KB_INPUT  (GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH)
#define GPIO_KB_OUTPUT GPIO_ODR_HIGH

#define INT_BOTH_FLOATING	(GPIO_INPUT | GPIO_INT_BOTH)
#define INT_BOTH_PULL_UP	(GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH)

#include "gpio_list.h"

/* ADC channels */
const struct adc_t adc_channels[] = {
	/*
	 * VBUS voltage sense pin.
	 * Sense pin 3.3V is converted to 4096. Accounting for the 2x
	 * voltage divider, the conversion factor is 6600mV/4096.
	 */
	[ADC_CH_USB_VBUS_SNS] = {"USB_VBUS_SNS", 6600, 4096, 0, STM32_AIN(5)},
	/* Micro USB D+ sense pin. Converted to mV (3300mV/4096). */
	[ADC_CH_USB_DP_SNS] = {"USB_DP_SNS", 3300, 4096, 0, STM32_AIN(2)},
	/* Micro USB D- sense pin. Converted to mV (3300mV/4096). */
	[ADC_CH_USB_DN_SNS] = {"USB_DN_SNS", 3300, 4096, 0, STM32_AIN(4)},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);

/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
const struct pwm_t pwm_channels[] = {
	{STM32_TIM(3), STM32_TIM_CH(1), 0, GPIO_ILIM},
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);

/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
	{"master", I2C_PORT_MASTER, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);

void board_config_pre_init(void)
{
	uint32_t val;

	/* Enable all GPIOs clocks */
	STM32_RCC_APB2ENR |= 0x1fd;

	/* remap OSC_IN/OSC_OUT to PD0/PD1 */
	STM32_GPIO_AFIO_MAPR |= 1 << 15;

	/*
	 * use PA13, PA14, PA15, PB3, PB4 as a GPIO,
	 * so disable JTAG and SWD
	 */
	STM32_GPIO_AFIO_MAPR = (STM32_GPIO_AFIO_MAPR & ~(0x7 << 24))
			       | (4 << 24);

	/* remap TIM3_CH1 to PB4 */
	STM32_GPIO_AFIO_MAPR = (STM32_GPIO_AFIO_MAPR & ~(0x3 << 10))
			       | (2 << 10);

	/* Analog input for ADC pins (PA2, PA4, PA5) */
	STM32_GPIO_CRL(GPIO_A) &= ~0x00ff0f00;

	/*
	 * Set alternate function for USART1. For alt. function input
	 * the port is configured in either floating or pull-up/down
	 * input mode (ref. section 7.1.4 in datasheet RM0041):
	 * PA9:  Tx, alt. function output
	 * PA10: Rx, input with pull-down
	 *
	 * note: see crosbug.com/p/12223 for more info
	 */
	val = STM32_GPIO_CRH(GPIO_A) & ~0x00000ff0;
	val |= 0x00000890;
	STM32_GPIO_CRH(GPIO_A) = val;

	/* EC_INT is output, open-drain */
	val = STM32_GPIO_CRH(GPIO_B) & ~0xf0;
	val |= 0x50;
	STM32_GPIO_CRH(GPIO_B) = val;
	/* put GPIO in Hi-Z state */
	gpio_set_level(GPIO_EC_INT, 1);
}

/* GPIO configuration to be done after I2C module init */
void board_i2c_post_init(int port)
{
	uint32_t val;

	/* enable alt. function (open-drain) */
	if (port == STM32_I2C1_PORT) {
		/* I2C1 is on PB6-7 */
		val = STM32_GPIO_CRL(GPIO_B) & ~0xff000000;
		val |= 0xdd000000;
		STM32_GPIO_CRL(GPIO_B) = val;
	} else if (port == STM32_I2C2_PORT) {
		/* I2C2 is on PB10-11 */
		val = STM32_GPIO_CRH(GPIO_B) & ~0x0000ff00;
		val |= 0x0000dd00;
		STM32_GPIO_CRH(GPIO_B) = val;
	}
}

static void board_startup_hook(void)
{
	gpio_set_flags(GPIO_SUSPEND_L, INT_BOTH_PULL_UP);

#ifdef CONFIG_PMU_FORCE_FET
	/* Enable lcd panel power */
	pmu_enable_fet(FET_LCD_PANEL, 1, NULL);
	/* Enable backlight power */
	pmu_enable_fet(FET_BACKLIGHT, 1, NULL);
#endif /* CONFIG_PMU_FORCE_FET */
}
DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_startup_hook, HOOK_PRIO_DEFAULT);

static void board_shutdown_hook(void)
{
#ifdef CONFIG_PMU_FORCE_FET
	/* Power off backlight power */
	pmu_enable_fet(FET_BACKLIGHT, 0, NULL);
	/* Power off lcd panel */
	pmu_enable_fet(FET_LCD_PANEL, 0, NULL);
#endif /* CONFIG_PMU_FORCE_FET */

	/* Disable pull-up on SUSPEND_L during shutdown to prevent leakage */
	gpio_set_flags(GPIO_SUSPEND_L, INT_BOTH_FLOATING);
}
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_shutdown_hook, HOOK_PRIO_DEFAULT);

int pmu_board_init(void)
{
	int failure = 0;

	/*
	 * Adjust charging parameters to match the expectations
	 * of the hardware fixing the cap ringing on DVT+ machines.
	 */
	failure |= pmu_set_term_current(RANGE_T01, TERM_I0875);
	failure |= pmu_set_term_current(RANGE_T12, TERM_I0875);
	failure |= pmu_set_term_current(RANGE_T23, TERM_I0875);
	failure |= pmu_set_term_current(RANGE_T34, TERM_I0875);
	failure |= pmu_set_term_current(RANGE_T40, TERM_I1000);
	failure |= pmu_set_term_voltage(RANGE_T01, TERM_V2100);
	failure |= pmu_set_term_voltage(RANGE_T12, TERM_V2100);
	failure |= pmu_set_term_voltage(RANGE_T23, TERM_V2100);
	failure |= pmu_set_term_voltage(RANGE_T34, TERM_V2100);
	failure |= pmu_set_term_voltage(RANGE_T40, TERM_V2100);

	/* Set fast charging timeout to 6 hours*/
	if (!failure)
		failure = pmu_set_fastcharge(TIMEOUT_6HRS);
	/* Enable external gpio CHARGER_EN control */
	if (!failure)
		failure = pmu_enable_ext_control(1);
	/* Disable force charging */
	if (!failure)
		failure = pmu_enable_charger(0);

	/* Set NOITERM bit */
	if (!failure)
		failure = pmu_low_current_charging(1);

	return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
}