mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-29 18:11:05 +00:00

Files

Nick Sanders 28a5ad1646 servo: add usb updater

This updater combines console and firmware update commands to
update both RO and RW sections of servo_v4 and servo_micro.

BRANCH=None
BUG=b:37513705
TEST=updated firmware

Change-Id: I9f585c90f5849f8dd7c9d2e08111ffbd5770fd54
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/668156
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>

2017-10-25 01:38:45 -07:00

ecusb

servo: add usb updater

2017-10-25 01:38:45 -07:00

flash_dfu.sh

tigertail: tigertool command line api

2017-05-16 00:09:24 -07:00

make_pkg.sh

tigertail: tigertool command line api

2017-05-16 00:09:24 -07:00

README.md

tigertail: tigertool command line api

2017-05-16 00:09:24 -07:00

tigertool.py

servo: add usb updater

2017-10-25 01:38:45 -07:00

README.md

tigertool

tigertool.py is a commandline utility to control the tigertail USB-C mux. It supports changing the mux status to port A, B, or off. You can set a serial number to use multiple tigertails at once.

Usage

Typical usage to set the mux port
./tigertail.py -m [A|B|off] -s [serialno]

Reboot the tigertail
./tigertail.py --reboot

Set the serial number, when only one tigertail is plugged
./tigertail.py --setserialno=[serialno]

Tigertail can support up to 20V 3A on the mux and passes through all USB-C lines except SBU.