Wei-Ning Huang 59bd55c41e i2c: separate slave and master code ...

Split i2c.c code in two (i2c_slave.c and i2c_master.c). i2c_slave.c is
used when EC has no i2c device connected (i2c master code not needed)
but EC is connected to AP via i2c.

BRANCH=none
BUG=b:37584134
TEST=1. Compile rose board with CONFIG_I2C and CONFIG_CMD_HOSTCMD. Then
        make sure EC_CMD_GET_PROTOCOL_INFO works.
     2. On Kevin and Elm, cherry-pick to firmware branch respectively,
        build and flash ec, i2c function works.

Change-Id: I1f95ad277713c5e30913e0a010ca03dfd9ec248c
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/484999
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2017-04-26 13:37:04 -07:00

..

acpi.c

common: Add tablet_mode API

2016-11-08 17:11:28 -08:00

adc.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

als.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ap_hang_detect.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

bluetooth_le.c

btle: Cleanup: Moved constants, renamed functions

2016-08-11 14:46:33 -07:00

btle_hci_controller.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

btle_ll.c

btle_ll.c: Initialize variables to fix GCC warnings

2016-11-16 19:04:31 -08:00

build.mk

i2c: separate slave and master code

2017-04-26 13:37:04 -07:00

button.c

console: Add non-verbose print config option

2017-02-11 13:06:38 -08:00

capsense.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

case_closed_debug.c

g: use devid 0 and 1 to create a serial number

2016-10-11 23:01:59 -07:00

charge_manager.c

charge_ramp: Specify port number in board_is_vbus_too_low()

2017-02-02 19:09:52 -08:00

charge_ramp.c

chg_ramp: Don't change ICL until vals are init'd.

2017-03-30 17:35:44 -07:00

charge_state_v2.c

charger: Add state for discharge + full

2017-03-03 17:11:30 -08:00

charger_profile_override.c

charger_profile: support multiple battery voltage range thresholds

2017-02-10 19:02:55 -08:00

charger.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

chipset.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

Cr50: The chan command is not safe.

2016-10-01 03:13:43 +00:00

console.c

console: ensure "Console is enabled" string is intact

2017-03-20 19:30:15 -07:00

crc8.c

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

curve25519.c

curve25519: strip-down, build and test

2017-02-23 16:02:03 -08:00

device_state.c

device_state: signal if device_set_state changed the state

2017-01-23 13:38:22 -08:00

dptf.c

eve: Move DPTF tablet mode support to common code

2017-02-14 14:50:36 -08:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

extension.c

cr50: add vendor command to restore corrupted header

2017-03-22 18:03:48 -07:00

extpower_gpio.c

extpower: Allow board to override signal debounce time

2016-09-02 07:11:33 -07:00

fan.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

firmware_image.lds.S

common: Split rwsig parts from rsa.h header

2017-04-11 20:22:32 -07:00

firmware_image.S

common/rollback: Add support for rollback protection

2017-04-06 03:29:38 -07:00

flash.c

flash: ensure proper pstate alignment

2017-03-24 09:32:53 -07:00

fmap.c

common: Split rwsig parts from rsa.h header

2017-04-11 20:22:32 -07:00

gesture.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

gpio_commands.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

gpio.c

servo_micro: add gpio mode get and set

2016-04-27 14:04:07 -07:00

hooks.c

cleanup: Remove charge_state_v1

2017-02-06 14:50:32 -08:00

host_command_master.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

host_command_pd.c

charge_state_v2: Limit i/p current to meet allowed MAX i/p system power

2016-12-05 16:43:00 -08:00

host_command.c

common: add feature bit for fingerprint support

2017-03-13 17:53:58 -07:00

host_event_commands.c

mkbp: Always keep memmap host event mask up-to-date

2016-12-01 19:59:04 -08:00

i2c_master.c

i2c: separate slave and master code

2017-04-26 13:37:04 -07:00

i2c_slave.c

i2c: separate slave and master code

2017-04-26 13:37:04 -07:00

i2c_wedge.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

i2cs_tpm.c

Cr50: i2cs: Added counter for write mismatch error

2017-02-02 12:29:30 -08:00

inductive_charging.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

keyboard_8042_sharedlib.c

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

keyboard_mkbp.c

system: Fixups in emulated sysrq code

2017-04-06 22:27:01 -07:00

keyboard_scan.c

keyboard: Always call keyboard_state_changed

2016-11-17 07:08:25 -08:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: fix max lightbar brightness

2015-09-25 09:13:34 -07:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

led_policy_std: turn off power led when system shutdown

2017-04-13 12:55:33 -07:00

lid_angle.c

oak: enable lid angle update

2016-03-02 13:39:47 -08:00

lid_switch.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

lightbar.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

rwsig: Make it possible to run as a task

2017-04-11 20:22:32 -07:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

math_util: Fix rotation by identity.

2016-08-24 17:40:27 -07:00

memory_commands.c

Add more CONFIG_CMD_* options for console commands

2016-10-01 00:02:01 -07:00

mkbp_event.c

mkbp_event: Properly queue events during host sleep

2016-11-04 18:31:37 -07:00

motion_lid.c

motion_lid: no angle correction when lid close

2017-03-17 20:12:23 -07:00

motion_sense.c

motion: Add opt3001 as a motion sensor

2017-02-16 18:03:59 -08:00

nvmem_vars.c

cr50: Store console lock state in NvMem vars.

2017-02-27 18:50:12 -08:00

nvmem.c

cr50: Make sure TPM wipe only clears TPM data.

2017-02-23 01:19:07 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

Cr50: The panicinfo command is not safe

2016-10-01 03:14:07 +00:00

pd_log.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

port80.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

power_button_x86.c

power_button_x86: Reset power button setting on chipset transitions

2017-04-17 16:23:50 -07:00

power_button.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

printf.c

console: Add non-verbose print config option

2017-02-11 13:06:38 -08:00

pstore_commands.c

pstore: Fix issue with block calculation for pstore blocks

2017-01-03 15:13:58 -08:00

pwm_kblight.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pwm.c

pwm: PWM is disabled when duty is set to max value

2016-09-08 17:57:51 -07:00

queue_policies.c

Stream: Remove in_stream/out_stream interface

2015-06-11 00:08:49 +00:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rollback.c

rollback: Update and lock rollback block as part of rwsig verification

2017-04-11 20:22:31 -07:00

rsa.c

common/rsa: Add support for exponent 3 RSA keys

2016-11-10 21:28:28 -08:00

rwsig.c

rwsig/update_fw: Prevent race in rollback protection

2017-04-26 04:28:08 -07:00

sensor_common.c

console: Add non-verbose print config option

2017-02-11 13:06:38 -08:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

common: Drop unused data structure

2016-05-05 19:16:50 -07:00

shared_mem.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

shmalloc.c

common: introduce malloc/free implementation

2017-01-05 21:13:09 -08:00

smbus.c

smbus: Re-write smbus driver

2016-03-21 16:35:33 -07:00

spi_commands.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

spi_flash_reg.c

spi_flash_reg: Correct lengths for W25Q40/GD25LQ40

2016-10-20 01:55:59 -07:00

spi_flash.c

Enable spi_flash_read to read > SPI_FLASH_MAX_READ_SIZE

2016-10-05 20:58:37 -07:00

spi_nor.c

common/spi_nor: Differential erase support

2017-02-09 05:04:56 +00:00

switch.c

switch: Initialize switch state earlier during HOOK_INIT

2017-03-02 11:29:07 -08:00

system.c

Revert "system: Shutdown AP before entering hibernate mode"

2017-04-21 06:03:57 -07:00

tablet_mode.c

motion: Disable tablet mode if one accel is broken

2017-01-04 18:07:12 -08:00

temp_sensor.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

test_util.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

thermal.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

throttle_ap.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

timer.c

common: add decimal real number seconds value to timeirnfo output

2017-02-03 20:01:45 -08:00

tpm_registers.c

cr50: Store console lock state in NvMem vars.

2017-02-27 18:50:12 -08:00

uart_buffering.c

UART: Remove X-on/X-off flow control

2016-04-27 10:10:02 -07:00

update_fw.c

rwsig/update_fw: Prevent race in rollback protection

2017-04-26 04:28:08 -07:00

usb_charger.c

bd99955: Improve interrupt / USB charger task wake scheme

2016-06-16 12:27:42 -07:00

usb_i2c.c

cr50: Have INAs and I2Cm enabled when rdd is attached

2017-02-06 14:50:31 -08:00

usb_pd_policy.c

pd: prefer CD pin assignments over EF for USBC->USBC case.

2017-04-06 20:05:08 -07:00

usb_pd_protocol.c

tcpm: anx74xx: Improvements to low power mode for S3/G3 chipset state

2017-04-11 20:22:34 -07:00

usb_pd_tcpc.c

servo_v4: pd: Updated CC_NC and CC_RA macros

2017-03-26 02:15:54 -07:00

usb_port_power_dumb.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

usb_port_power_smart.c

USB: Remove usb_charge_ports_enabled

2017-04-20 13:09:07 -07:00

usb_update.c

common/usb_update: add support for extra commands

2017-04-26 04:28:07 -07:00

util.c

util: add constant-time memcmp

2017-02-23 16:02:02 -08:00

vboot_hash.c

console: Add non-verbose print config option

2017-02-11 13:06:38 -08:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

common/rollback: Add support for rollback protection

2017-04-06 03:29:38 -07:00

virtual_battery.c

i2c_passthru: fix virtual battery operation

2016-12-14 06:03:14 -08:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

wireless.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00