Todd Broch f6e45879d7 dingdong: enable RW firmware signature verification ...

Check RSA signature of the RW firmware and jump to it if it is valid.

Signed-off-by: Todd Broch <tbroch@chromium.org>

BRANCH=none
BUG=chrome-os-partner:31193
TEST=flash on dingdong and boot with both bad and good RW firmware and
see it jump to RW only on the latter.

Change-Id: Ife8d1f9bcc16d796b9005a9761610119e456dd63
Reviewed-on: https://chromium-review.googlesource.com/231830
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>

2014-12-01 20:30:54 +00:00

..

auron

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

bds

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

big

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

cr50

cr50: always generate the .hex file

2014-11-21 02:44:13 +00:00

dingdong

dingdong: enable RW firmware signature verification

2014-12-01 20:30:54 +00:00

discovery

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

discovery-stm32f072

USB: Remove special case for iVersion string descriptor

2014-11-04 21:34:39 +00:00

falco

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

firefly

pd: wait tSnkTransition after ACCEPT to change voltage

2014-11-21 02:44:56 +00:00

fruitpie

pd: wait tSnkTransition after ACCEPT to change voltage

2014-11-21 02:44:56 +00:00

hadoken

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

hoho

hoho: enable RW firmware signature verification

2014-12-01 20:30:50 +00:00

host

pd: wait tSnkTransition after ACCEPT to change voltage

2014-11-21 02:44:56 +00:00

it8380dev

it8380dev: add pwm control module

2014-10-29 03:29:17 +00:00

jerry

Jerry: modify the power led polarity

2014-11-17 16:34:09 +00:00

keyborg

zinger: keyborg: fix runtime bug with task_wait_event()

2014-08-22 00:52:43 +00:00

link

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

mccroskey

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

mec1322_evb

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

mighty

Add initial mighty support

2014-11-20 05:09:09 +00:00

nyan

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

peppy

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

pinky

Jerry: modify gpio config, hibernate

2014-11-13 04:23:22 +00:00

pit

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

plankton

plankton: remove dualrole power capable flag

2014-11-22 00:13:01 +00:00

rambi

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

ryu

ryu: Remove workaround for PI3USB9281

2014-11-21 06:23:21 +00:00

ryu_p1

pd: wait tSnkTransition after ACCEPT to change voltage

2014-11-21 02:44:56 +00:00

ryu_sh

ryu: Add LSM6DS0 support.

2014-11-18 05:20:15 +00:00

samus

samus: add backboost detect GPIO

2014-11-19 20:54:02 +00:00

samus_pd

samus: add active charge port to EC<->PD status exchange

2014-11-22 09:34:20 +00:00

snow

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

spring

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

squawks

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

strago

Strago: Spi support added on Private SPI lines

2014-11-20 23:03:49 +00:00

twinkie

pd: wait tSnkTransition after ACCEPT to change voltage

2014-11-21 02:44:56 +00:00

zinger

zinger: change product type to undefined

2014-11-22 00:13:06 +00:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00