Alec Berg 64bbfe253c tcpc: add RX message buffer and don't send goodCRC when full ...

Add RX message buffer to the TCPC (currently two deep). If
the buffer is full and message is received, don't send goodCRC.

BUG=chrome-os-partner:43482
BRANCH=none
TEST=tested on glados. saw that with back to back PD
packets, we send goodCRC to both packets and process them in
order, taking about 7ms per packet. also tested buffer size
of 1 and verified that with back to back PD packets, we don't
send goodCRC to second packet.

Change-Id: I7f44b3c3a186ae61be8ca03017deec6e6b6c6f9f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289005
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2015-08-01 21:05:30 +00:00

..

battery

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

charger

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

led

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

tcpm

tcpc: add RX message buffer and don't send goodCRC when full

2015-08-01 21:05:30 +00:00

temp_sensor

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

accel_kxcj9.c

accel: mechanical changes from i2c_addr to addr

2015-07-30 19:58:01 +00:00

accel_kxcj9.h

driver: kxcj9: Add bias offset code

2015-07-09 07:53:38 +00:00

accelgyro_bmi160.c

driver: bmi160: Allow Dynamic selection of SPI or I2C transport

2015-08-01 02:51:10 +00:00

accelgyro_bmi160.h

driver: bmi160: Allow Dynamic selection of SPI or I2C transport

2015-08-01 02:51:10 +00:00

accelgyro_lsm6ds0.c

accel: mechanical changes from i2c_addr to addr

2015-07-30 19:58:01 +00:00

accelgyro_lsm6ds0.h

driver: lsm6ds0: Add bias offset code

2015-07-09 07:53:47 +00:00

als_isl29035.c

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

als_isl29035.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

als_opt3001.c

Driver: OPT3001: Add TI OPT3001 light sensor driver

2015-07-21 01:34:27 +00:00

als_opt3001.h

Driver: OPT3001: Add TI OPT3001 light sensor driver

2015-07-21 01:34:27 +00:00

build.mk

driver: bmm150 measurement compensation

2015-07-22 23:50:31 +00:00

ina2xx.c

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

mag_bmm150.c

driver: bmi160: Fix bugs found testing SPI

2015-08-01 02:50:41 +00:00

mag_bmm150.h

driver: bmm150 measurement compensation

2015-07-22 23:50:31 +00:00

mcdp28x0.c

USART: Add flexibility needed to support DMA

2015-07-15 21:57:46 +00:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb30532.h

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

ps8740.h

usb_mux: Add support for Parade PS8740 chip

2015-06-30 17:18:40 +00:00

regulator_ir357x.c

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00

tsu6721.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_mux_pi3usb30532.c

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

usb_mux_ps8740.c

usb_mux: Add support for Parade PS8740 chip

2015-06-30 17:18:40 +00:00

usb_mux.c

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

usb_switch_pi3usb9281.c

usb: pi3usb9281: Allow flexible chip configurations

2015-06-12 16:37:39 +00:00

usb_switch_tsu6721.c

Driver: Add macros to conditionally compile the console commands

2015-07-29 21:18:25 +00:00