Todd Broch 53b6a345c8 hoho: Enable USB PD support. ...

CL to allow hoho to receive initial USB PD communication (source
capabilities payload).

BRANCH=none
BUG=chrome-os-partner:31192
TEST=manual,

When attaching hoho to fruitpie and configured via
  'pd dualrole source'

I see on hoho side:
--- UART initialized after reboot ---
[Reset cause: reset-pin power-on]
[Image: RO, hoho_v1.1.2213-2bf6a29-dirty 2014-09-15 12:10:22 tbroch@brisket.mtv.corp.google.com]
[0.000466 Inits done]
C0 st2
Console is enabled; type HELP for help.
> [0.250678 USB PD initialized]
C0 st3
[0.264629 PD TMOUT RX 1/1]
RX ERR (-1)
Request [1] 5V 3000mA
C0 st4
C0 st5
C0 st6

> pd 0 state
Port C0, Enabled - Role: SNK Polarity: CC2 State: SNK_READY

Change-Id: Ic5871946425f0ff12d717fbbbbb9e81c6b67cc6f
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/217977
Reviewed-by: Alec Berg <alecaberg@chromium.org>

2014-09-23 06:28:48 +00:00

..

board.c

hoho: Enable spi2 master for comm with external flash.

2014-09-12 03:39:20 +00:00

board.h

hoho: Enable USB PD support.

2014-09-23 06:28:48 +00:00

build.mk

hoho: Enable USB PD support.

2014-09-23 06:28:48 +00:00

ec.tasklist

hoho: Enable USB PD support.

2014-09-23 06:28:48 +00:00

gpio.inc

hoho: Enable spi2 master for comm with external flash.

2014-09-12 03:39:20 +00:00

Makefile

hoho: Initial board configuration.

2014-08-16 05:26:40 +00:00

usb_pd_config.h

hoho: Enable USB PD support.

2014-09-23 06:28:48 +00:00

usb_pd_policy.c

hoho: Enable USB PD support.

2014-09-23 06:28:48 +00:00