OpenCellular/power/stoney.c

/* Copyright 2017 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Stoney power sequencing module for Chrome EC */

#include "chipset.h"
#include "common.h"
#include "console.h"
#include "ec_commands.h"
#include "gpio.h"
#include "hooks.h"
#include "lid_switch.h"
#include "lpc.h"
#include "power.h"
#include "power_button.h"
#include "system.h"
#include "timer.h"
#include "usb_charge.h"
#include "util.h"
#include "wireless.h"
#include "registers.h"

/* Console output macros */
#define CPUTS(outstr) cputs(CC_CHIPSET, outstr)
#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)

#define IN_S5_PGOOD POWER_SIGNAL_MASK(X86_S5_PGOOD)

static int forcing_coldreset; /* Forced coldreset in progress? */
static int forcing_shutdown;  /* Forced shutdown in progress? */

void chipset_force_shutdown(void)
{
	CPRINTS("%s()", __func__);

	if (!chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
		forcing_shutdown = 1;
		power_button_pch_press();
	}
}

static void chipset_force_g3(void)
{
#ifdef BOARD_KAHLEE
	/* Power off in G3 not supported on kahlee so shutdown instead. */
	chipset_force_shutdown();
#else
	/* Disable system power ("*_A" rails) in G3. */
	gpio_set_level(GPIO_EN_PWR_A, 0);
#endif
}

void chipset_reset(void)
{
	CPRINTS("%s", __func__);

	if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
		CPRINTS("Can't reset: SOC is off");
		return;
	}

	/*
	 * Send a pulse to SYS_RST to trigger a warm reset.
	 */
	gpio_set_level(GPIO_PCH_RCIN_L, 0);
	usleep(32 * MSEC);
	gpio_set_level(GPIO_PCH_RCIN_L, 1);
}

void chipset_throttle_cpu(int throttle)
{
	CPRINTS("%s(%d)", __func__, throttle);
	if (chipset_in_state(CHIPSET_STATE_ON))
		gpio_set_level(GPIO_CPU_PROCHOT, throttle);
}

enum power_state power_chipset_init(void)
{
	/* Pause in S5 when shutting down. */
	power_set_pause_in_s5(1);

	/*
	 * If we're switching between images without rebooting, see if the x86
	 * is already powered on; if so, leave it there instead of cycling
	 * through G3.
	 */
	if (system_jumped_to_this_image()) {
		if (gpio_get_level(GPIO_S0_PGOOD)) {
			/* Disable idle task deep sleep when in S0. */
			disable_sleep(SLEEP_MASK_AP_RUN);

			CPRINTS("already in S0");
			return POWER_S0;
		}

		CPRINTS("forcing G3");
		chipset_force_g3();
	}
	return POWER_G3;
}

static void handle_pass_through(enum gpio_signal pin_in,
				enum gpio_signal pin_out)
{
	/*
	 * Pass through asynchronously, as SOC may not react
	 * immediately to power changes.
	 */
	int in_level = gpio_get_level(pin_in);
	int out_level = gpio_get_level(pin_out);

	/*
	 * Only pass through high S0_PGOOD (S0 power) when S5_PGOOD (S5 power)
	 * is also high (S0_PGOOD is pulled high in G3 when S5_PGOOD is low).
	 */
	if ((pin_in == GPIO_S0_PGOOD) && !gpio_get_level(GPIO_S5_PGOOD))
		in_level = 0;

	/* Nothing to do. */
	if (in_level == out_level)
		return;

	/*
	 * SOC requires a delay of 1ms with stable power before
	 * asserting PWR_GOOD.
	 */
	if ((pin_in == GPIO_S0_PGOOD) && in_level)
		msleep(1);

	gpio_set_level(pin_out, in_level);

	CPRINTS("Pass through %s: %d", gpio_get_name(pin_in), in_level);
}

enum power_state power_handle_state(enum power_state state)
{
	handle_pass_through(GPIO_S5_PGOOD, GPIO_PCH_RSMRST_L);

	handle_pass_through(GPIO_S0_PGOOD, GPIO_PCH_SYS_PWROK);

	if (state == POWER_S5 && forcing_shutdown) {
		power_button_pch_release();
		forcing_shutdown = 0;
	}

	switch (state) {
	case POWER_G3:
		break;

	case POWER_G3S5:
		/* Exit SOC G3 */
		/* Platform is powering up, clear forcing_coldreset */
		forcing_coldreset = 0;

#ifndef BOARD_KAHLEE
		/* Enable system power ("*_A" rails) in S5. */
		gpio_set_level(GPIO_EN_PWR_A, 1);
#endif

		/* Call hooks to initialize PMIC */
		hook_notify(HOOK_CHIPSET_PRE_INIT);

		if (power_wait_signals(IN_S5_PGOOD)) {
			chipset_force_g3();
			return POWER_G3;
		}

		CPRINTS("Exit SOC G3");

		return POWER_S5;

	case POWER_S5:
		if (!power_has_signals(IN_S5_PGOOD)) {
			/* Required rail went away */
			return POWER_S5G3;
		} else if (gpio_get_level(GPIO_PCH_SLP_S5_L) == 1) {
			/* Power up to next state */
			return POWER_S5S3;
		}
		break;

	case POWER_S5S3:
		if (!power_has_signals(IN_S5_PGOOD)) {
			/* Required rail went away */
			return POWER_S5G3;
		}

		/* Call hooks now that rails are up */
		hook_notify(HOOK_CHIPSET_STARTUP);

		return POWER_S3;

	case POWER_S3:
		if (!power_has_signals(IN_S5_PGOOD)) {
			/* Required rail went away */
			return POWER_S5G3;
		} else if (gpio_get_level(GPIO_PCH_SLP_S3_L) == 1) {
			/* Power up to next state */
			return POWER_S3S0;
		} else if (gpio_get_level(GPIO_PCH_SLP_S5_L) == 0) {
			/* Power down to next state */
			return POWER_S3S5;
		}
		break;

	case POWER_S3S0:
		if (!power_has_signals(IN_S5_PGOOD)) {
			/* Required rail went away */
			return POWER_S5G3;
		}

		/* Enable wireless */
		wireless_set_state(WIRELESS_ON);

		/* Call hooks now that rails are up */
		hook_notify(HOOK_CHIPSET_RESUME);

		/*
		 * Disable idle task deep sleep. This means that the low
		 * power idle task will not go into deep sleep while in S0.
		 */
		disable_sleep(SLEEP_MASK_AP_RUN);

		return POWER_S0;

	case POWER_S0:
		if (!power_has_signals(IN_S5_PGOOD)) {
			/* Required rail went away */
			return POWER_S5G3;
		} else if (gpio_get_level(GPIO_PCH_SLP_S3_L) == 0) {
			/* Power down to next state */
			return POWER_S0S3;
		}
		break;

	case POWER_S0S3:
		/* Call hooks before we remove power rails */
		hook_notify(HOOK_CHIPSET_SUSPEND);

		/* Suspend wireless */
		wireless_set_state(WIRELESS_SUSPEND);

		/*
		 * Enable idle task deep sleep. Allow the low power idle task
		 * to go into deep sleep in S3 or lower.
		 */
		enable_sleep(SLEEP_MASK_AP_RUN);

		return POWER_S3;

	case POWER_S3S5:
		/* Call hooks before we remove power rails */
		hook_notify(HOOK_CHIPSET_SHUTDOWN);

		/* Disable wireless */
		wireless_set_state(WIRELESS_OFF);

		return POWER_S5;

	case POWER_S5G3:

		/* Power up the platform again for forced cold reset */
		if (forcing_coldreset) {
			forcing_coldreset = 0;
			return POWER_G3S5;
		}

		chipset_force_g3();

		return POWER_G3;

	default:
		break;
	}
	return state;
}