Alec Berg 7b305b752b zinger: samus_pd: increment zinger hardware id minor revision ...

Add a minor revision to the PD device hardware ID field in the info
custom VDM and set increment this minor ID from 0 to 1 for zinger.
This differentiates zingers for the auto-update payload, so we can
update only those with a specific major and minor ID version.

BUG=none
BRANCH=samus
TEST=load onto samus and zinger. when connect zinger, see on PD
console: Dev:0x0401 SW:2289 RW:0, which shows the appropriate
device ID.

Change-Id: I482ee2d850332b608cdd81537f68d4dc509bfc1a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221320
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2014-10-07 05:53:26 +00:00

..

acpi.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

adc.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

als.c

samus: move als sampling from hooks to its own task

2014-06-04 21:00:32 +00:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

build.mk

zinger: check RW firmware signature

2014-10-02 23:18:25 +00:00

button.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

charge_state_v1.c

EC: Add smart battery firmware update driver

2014-09-03 22:49:28 +00:00

charge_state_v2.c

charge_state_v2: Send host event if charge state changes

2014-09-30 01:53:41 +00:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

clz.c

Move CLZ emulation to common code

2014-03-06 21:32:57 +00:00

console_output.c

usb: add support for mass storage (bulk-only)

2014-08-15 17:55:04 +00:00

console.c

usb: add USB console driver

2014-07-17 00:40:23 +00:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

eoption.c

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extpower_falco.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

extpower_gpio.c

Initialize extpower module prior to modules with default priority

2014-03-29 02:14:26 +00:00

extpower_snow.c

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

extpower_spring.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

fan.c

ectool: Add hostcmd support to set fan duty cycle for each fan separately

2014-10-07 01:29:36 +00:00

firmware_image.lds.S

Move core-specific toolchain configuration to core/ directory

2013-11-07 22:36:05 +00:00

firmware_image.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

flash.c

flash: Fix bad check for flash_is_erased()

2014-07-08 02:14:32 +00:00

fmap.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

gpio.c

Added v1 version of ectool gpioget supporting more functions

2014-04-29 03:11:16 +00:00

hooks.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

host_command_master.c

samus: add automatic retries for host commands from EC to PD

2014-09-17 01:24:05 +00:00

host_command_pd.c

samus: exchange status with PD MCU on boot

2014-09-17 01:24:25 +00:00

host_command.c

EC: Add smart battery firmware update driver

2014-09-03 22:49:28 +00:00

host_event_commands.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

i2c_arbitration.c

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

i2c: allow for mulitple i2c busses to utilize automatic unwedging

2014-09-30 08:32:23 +00:00

in_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

inductive_charging.c

Add inductive charging control module

2014-08-25 20:52:32 +00:00

keyboard_8042.c

Add demo_tap() function for lightbar demo mode

2014-09-26 09:21:06 +00:00

keyboard_mkbp.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

keyboard_scan.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

lightbar: correctly revert to the S0/S3/S5 patterns

2014-08-20 22:42:15 +00:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

lid_angle.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

lid_switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

lightbar.c

lightbar: refactoring RAMP_ONCE and CYCLE_ONCE

2014-10-04 21:08:45 +00:00

main.c

Add CONFIG_BRINGUP option to help debug signals for bringup

2014-06-05 01:36:44 +00:00

math_util.c

[common]: Remove accelerator calibration code.

2014-09-25 04:09:07 +00:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

motion_sense.c

[common]: Remove accelerator calibration code.

2014-09-25 04:09:07 +00:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

out_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

panic_output.c

ryu: Use brief assertion failure message

2014-10-01 06:53:14 +00:00

pmu_tps65090_charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

pmu_tps65090_powerinfo.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

port80.c

CHROMIUM: ec: Add Port 80 history access from ectools

2014-05-07 03:41:27 +00:00

power_button_x86.c

Add CONFIG_BRINGUP option to help debug signals for bringup

2014-06-05 01:36:44 +00:00

power_button.c

power_button: expose raw signal assertion

2014-08-21 08:02:00 +00:00

printf.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue.c

Queue: Add functionality needed by new USART stream driver

2014-09-18 02:59:24 +00:00

rsa.c

add RSA signature verification code

2014-09-30 05:42:15 +00:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smbus.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

spi_flash.c

Refactor STM32 SPI flash driver

2014-07-15 09:07:40 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

pd: change pd_soft_reset() to use PD task to send command

2014-09-25 18:15:47 +00:00

temp_sensor.c

cleanup: Rename and move header files

2013-10-23 21:27:40 +00:00

test_util.c

emulator: Keep fail count across sysjump

2014-01-08 03:49:36 +00:00

thermal.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

ite: Add initial support for ITE IT8380 chip

2014-01-08 02:24:23 +00:00

uart_buffering.c

Make Ctrl-S and Ctrl-Q match the rest of the world

2014-06-04 21:01:43 +00:00

usb_pd_protocol.c

zinger: samus_pd: increment zinger hardware id minor revision

2014-10-07 05:53:26 +00:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

util: move console command argument parsing to util.c

2014-06-11 00:17:06 +00:00

vboot_hash.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

version.c

zinger: samus_pd: change zinger SW ver to report commit count

2014-08-28 20:12:52 +00:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00