Derek Basehore 918b2dde3a pit: Change battery level warning and shutdown levels ...

This causes the EC to give a warning when the battery is less than 3.5% and
shutdown when the batteyr is less than 1.5%

BUG=chrome-os-partner:21926
TEST=check that warning happens at < 3.5% and shutdown happens at < 1.5% on the
EC console.

Change-Id: I1bd06f632e969b55bbb041c65ab106ef764e454b
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
(cherry picked from commit 2f93978e5e5dcf841ef24fa6b9ba2fa9459d3d98)
(cherry picked from commit 447d69abcb3c61440d89b4aac8c4472a35b3b77d)
Reviewed-on: https://chromium-review.googlesource.com/169055
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>

2013-09-12 18:04:29 +00:00

..

backlight_x86.c

Move x86 backlight-enable passthru code to its own module

2013-07-11 16:51:39 -07:00

battery_bq20z453.c

Support battery cut-off mechanism for factory.

2012-08-28 04:39:56 -07:00

battery_bq27541.c

Extend charge state machine to accommodate Kirby

2013-09-05 07:20:18 +00:00

battery_falco.c

Hide battery vendor params override behind config option

2013-08-09 11:19:03 -07:00

battery_kirby.c

kirby: Update battery voltage parameters

2013-09-10 19:39:57 +00:00

battery_link.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

battery_peppy.c

Peppy: Set battery pre-charge current to worst case value.

2013-09-03 23:38:51 +00:00

battery_slippy.c

Hide battery vendor params override behind config option

2013-08-09 11:19:03 -07:00

battery_spring.c

spring: Guard battery cut-off command with lock

2013-06-05 11:25:10 -07:00

battery_wolf.c

Update Wolf from Slippy.

2013-08-08 20:29:17 -07:00

battery.c

Show charging allowed info for 'battery' command

2013-09-10 18:24:07 +00:00

build.mk

Change get-set host command to be less generic

2013-09-12 01:49:32 +00:00

charge_state.c

Avoid charging over battery's maximum voltage

2013-09-11 03:45:04 +00:00

charger_bq24192.c

Fix a bug in BQ24192 charger driver

2013-09-11 03:45:06 +00:00

charger_bq24707a.c

Add BQ24192 charger driver

2013-08-30 15:39:31 +00:00

charger_bq24715.c

Add BQ24192 charger driver

2013-08-30 15:39:31 +00:00

charger_bq24725.c

Add BQ24192 charger driver

2013-08-30 15:39:31 +00:00

charger_bq24738.c

Add BQ24192 charger driver

2013-08-30 15:39:31 +00:00

charger_common.c

Generalize 'charger' command to support BQ24192

2013-09-10 19:40:08 +00:00

chipset_gaia.c

Add comments about hooks and deferred functions

2013-09-06 19:16:23 +00:00

chipset_haswell.c

Change get-set host command to be less generic

2013-09-12 01:49:32 +00:00

chipset_ivybridge.c

x86: Enable all wireless switches when going into S0

2013-07-12 16:49:14 -07:00

chipset_x86_common.c

Refactor x86 chipset code

2013-07-10 11:16:43 -07:00

chipset.c

Move common chipset console commands to chipset.c

2013-04-24 09:58:22 -07:00

console_output.c

console_output: Add commands for saving / restoring print mask.

2013-08-08 13:51:09 -07:00

console.c

Move input character processing from UART interrupt to console task

2013-08-02 17:32:26 -07:00

eoption.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

extpower_falco.c

Handle multiple independent sources and types of CPU throttling

2013-09-11 01:49:48 +00:00

extpower_gpio.c

Move enabling AC_PRESENT interrupt to extpower_gpio.c

2013-04-02 14:12:56 -07:00

extpower_kirby.c

kirby: Detect OTG dongle on EC boot

2013-09-12 13:28:57 +00:00

extpower_snow.c

Add common implementation for daisy/snow extpower_is_present

2013-04-03 11:49:07 -07:00

extpower_spring.c

Rename extpower_usb to extpower_spring

2013-08-28 01:54:48 +00:00

firmware_image.lds.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

firmware_image.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

flash_common.c

Don't send IN_PROGRESS response if GET_COMMS_STATUS is unsupported

2013-08-24 09:37:47 -07:00

fmap.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

gpio_common.c

Clean up configuring GPIO alternate functions

2013-08-07 12:43:35 -07:00

hooks.c

stm32l: Add a "PRE_FREQ_CHANGE" hook to allow other code to prepare

2013-08-29 22:51:11 +00:00

host_command.c

Host commands don't set the response pointer

2013-08-02 13:05:56 -07:00

host_event_commands.c

Completely new thermal/fan implementation

2013-08-23 10:38:36 -07:00

i2c_arbitration.c

Move I2C arbitration to its own file

2013-03-20 15:23:29 -07:00

i2c_common.c

Add build-time checks on board-specific array sizes.

2013-07-31 12:33:31 -07:00

keyboard_8042.c

Update keyboard scanmatrix for Japanese keyboards.

2013-08-30 15:39:24 +00:00

keyboard_mkbp.c

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

keyboard_scan.c

Update keyboard scanmatrix for Japanese keyboards.

2013-08-30 15:39:24 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

led_common.c

Peppy ectool led command

2013-08-07 12:43:48 -07:00

led_driver_ds2413.c

Clean up onewire config options

2013-07-24 18:08:32 -07:00

led_driver_lp5562.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

led_falco.c

Falco: LED should flash white when battery is < 12%, not 7%.

2013-08-28 16:46:37 +00:00

led_kirby.c

kirby: Set LED color according to charging status

2013-09-10 18:24:11 +00:00

led_lp5562.c

Fix a bug that I2C error may cause incorrect LED color

2013-08-21 19:20:44 -07:00

led_peppy.c

Peppy: Make power LED turn amber when entering suspend

2013-08-29 22:48:36 +00:00

led_slippy.c

Battery LED control for Slippy

2013-07-22 15:28:58 -07:00

lid_switch.c

Add lid switch test and enable kb_mkbp test

2013-05-08 13:24:19 -07:00

lightbar.c

Add LIGHTBAR_CMD_VERSION command to detect lightbar features.

2013-08-30 16:47:14 +00:00

main.c

Initalize DMA before UART

2013-09-10 23:46:07 +00:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

mock_charger.c

Handle multiple independent sources and types of CPU throttling

2013-09-11 01:49:48 +00:00

mock_i8042.c

Rename I8042CMD task to KEYPROTO

2013-03-29 15:39:32 -07:00

mock_smart_battery.c

Add BQ27541 battery driver

2013-09-05 07:19:59 +00:00

mock_temp_sensor.c

Add build-time checks on board-specific array sizes.

2013-07-31 12:33:31 -07:00

mock_x86_power.c

Refactor x86 chipset code

2013-07-10 11:16:43 -07:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

pmu_tps65090_charger.c

pit: Change battery level warning and shutdown levels

2013-09-12 18:04:29 +00:00

pmu_tps65090_powerinfo.c

Add PMU powerinfo host command and console command

2013-07-29 11:07:31 -07:00

pmu_tps65090.c

pit: Only enable FET4 by default at cold reset

2013-08-16 20:41:08 -07:00

port80.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

power_button_x86.c

x86: use charge state hook to wake up power button task

2013-08-02 17:32:42 -07:00

power_button.c

Fix leaving keyboard scanning disabled on brief power button press

2013-08-09 11:19:01 -07:00

printf.c

Clean up printf module

2012-10-25 14:12:10 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_fan.c

Refactor PWM module

2013-08-27 23:20:33 +00:00

queue.c

Only waste 1 byte in queue buffer

2013-06-10 01:48:44 -07:00

regulator_ir357x.c

Rename files in common/ to be more consistent

2013-07-08 11:30:38 -07:00

sha256.c

Clean up vboot hash support

2012-10-25 17:03:44 -07:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smart_battery.c

Extend charge state machine to accommodate Kirby

2013-09-05 07:20:18 +00:00

switch.c

Move switch module from chip/lm4 to common

2013-07-17 10:49:48 -07:00

system_common.c

Introducing MPU module for Cortex-M3

2013-09-05 19:06:27 +00:00

temp_sensor_g781.c

Poll and cache g781 temperature values

2013-08-13 13:07:54 -07:00

temp_sensor_tmp006.c

Completely new thermal/fan implementation

2013-08-23 10:38:36 -07:00

temp_sensor.c

Also test temp sensor read delegation in thermal test

2013-09-04 20:32:49 +00:00

test_util.c

Add boot key test

2013-09-05 07:20:56 +00:00

thermal.c

Handle multiple independent sources and types of CPU throttling

2013-09-11 01:49:48 +00:00

throttle_ap.c

Handle multiple independent sources and types of CPU throttling

2013-09-11 01:49:48 +00:00

uart_buffering.c

stm32: Support DMA-based UART output

2013-09-11 22:41:22 +00:00

usb_port_power_dumb.c

usb: Disable ports on entry to S5

2013-05-22 12:29:20 -07:00

usb_port_power_smart.c

Split the USB port power control into smart and dumb versions.

2013-05-01 15:36:22 -07:00

usb_switch_tsu6721.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

util.c

Support multi-bit mask in STM32L's GPIO functions

2013-09-11 19:45:38 +00:00

vboot_hash.c

Invalidate hash if flash operation changes the hashed region

2012-12-10 15:14:38 -08:00

version.c

Truncate version string to 32 characters

2013-07-19 18:01:55 -07:00

wireless.c

Split wireless power/radio control out of switch.c

2013-07-11 16:51:40 -07:00