Randall Spangler 40a1e7fa75 Cleanly force battery to mAh mode when reading capacity ...

Smart batteries can report capacity in mAh or 10mW units.  We forced
the units to mAh in charge_state.c's main loop, but that doesn't
guarantee that they're actually set before the capacity is read.  It's
cleaner to check the capacity reporting mode when actually reading the
capacity.

BUG=chrome-os-partner:20881
BRANCH=none
TEST=battery command reports the same capacity data before/after change
     (on rambi, design=2940 mAh)

Change-Id: I4a4c80eaade72bb09627d5d65693c097e264a992
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176154

2013-12-02 22:03:54 +00:00

..

als.c

Add EC_MEMMAP_ALS, update it once per second

2013-11-08 00:53:12 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Cleanly force battery to mAh mode when reading capacity

2013-12-02 22:03:54 +00:00

build.mk

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

charge_state.c

Cleanly force battery to mAh mode when reading capacity

2013-12-02 22:03:54 +00:00

charger.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

chipset.c

Move common chipset console commands to chipset.c

2013-04-24 09:58:22 -07:00

console_output.c

cleanup: Comments in console_output.c

2013-10-25 01:32:41 +00:00

console.c

lm4: Use low speed clock in deep sleep.

2013-10-21 23:59:38 +00:00

eoption.c

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extpower_falco.c

cleanup: Rename and move header files

2013-10-23 21:27:40 +00:00

extpower_gpio.c

Move enabling AC_PRESENT interrupt to extpower_gpio.c

2013-04-02 14:12:56 -07:00

extpower_snow.c

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

extpower_spring.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

fan.c

Add DPTF interface for fan duty

2013-11-21 22:21:34 +00:00

firmware_image.lds.S

Move core-specific toolchain configuration to core/ directory

2013-11-07 22:36:05 +00:00

firmware_image.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

flash.c

cleanup: Improve / remove more TODO comments

2013-11-01 17:13:07 +00:00

fmap.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

gpio.c

Allow "ectool gpioget" to run on write protected machines

2013-10-29 02:59:12 +00:00

hooks.c

Record average runtime and delay of hooks

2013-09-23 06:10:32 +00:00

host_command.c

cleanup: Still more TODO comments

2013-11-02 01:07:10 +00:00

host_event_commands.c

Completely new thermal/fan implementation

2013-08-23 10:38:36 -07:00

i2c_arbitration.c

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

i2c.c

cleanup: comments in i2c modules

2013-10-25 01:32:31 +00:00

keyboard_8042.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

keyboard_mkbp.c

cleanup: mkbp keyboard module

2013-10-30 23:10:13 +00:00

keyboard_scan.c

cleanup: Assorted TODO comments

2013-10-31 18:43:39 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

led_common.c

Peppy ectool led command

2013-08-07 12:43:48 -07:00

lid_switch.c

Add lid switch test and enable kb_mkbp test

2013-05-08 13:24:19 -07:00

lightbar.c

cleanup: Battery header files and filenames

2013-10-07 18:30:50 +00:00

main.c

Initalize DMA before UART

2013-09-10 23:46:07 +00:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

pmu_tps65090_charger.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090_powerinfo.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090.c

puppy: remove temporary workaround in pmu chipset startup

2013-10-22 21:41:33 +00:00

port80.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

power_button_x86.c

cleanup: Still more TODO comments

2013-11-02 01:07:10 +00:00

power_button.c

Fix leaving keyboard scanning disabled on brief power button press

2013-08-09 11:19:01 -07:00

printf.c

Reduce stack space used by vfnprintf()

2013-11-20 18:43:56 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue.c

Only waste 1 byte in queue buffer

2013-06-10 01:48:44 -07:00

sha256.c

Clean up vboot hash support

2012-10-25 17:03:44 -07:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

switch.c

cleanup: Even more TODO comments

2013-11-01 20:07:24 +00:00

system.c

Add boardversion command to ectool

2013-11-13 05:19:09 +00:00

temp_sensor.c

cleanup: Rename and move header files

2013-10-23 21:27:40 +00:00

test_util.c

Add boot key test

2013-09-05 07:20:56 +00:00

thermal.c

Clean up hook priorties on LM4

2013-11-04 23:15:38 +00:00

throttle_ap.c

Handle multiple independent sources and types of CPU throttling

2013-09-11 01:49:48 +00:00

uart_buffering.c

lm4: Use low speed clock in deep sleep.

2013-10-21 23:59:38 +00:00

usb_port_power_dumb.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

usb_port_power_smart.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

util.c

cleanup: Assorted TODO comments

2013-10-31 18:43:39 +00:00

vboot_hash.c

Return hash status on HAST_START command

2013-10-14 23:27:11 +00:00

version.c

Truncate version string to 32 characters

2013-07-19 18:01:55 -07:00

wireless.c

Split wireless power/radio control out of switch.c

2013-07-11 16:51:40 -07:00