Bill Richardson b28ed970c4 Cr50: Update the USB VID:PID:subclass constants ...

The device-specific subclass used for Non-HC firmware updates is
in the spreadsheet now, so we can rename the macros to be
"official".

BUG=chrome-os-partner:49962
BRANCH=none
TEST=make buildall; test on cr50

  make BOARD=cr50 (plus whatever signing magic works for you)
  make -C extra/usb_updater
  ./extra/usb_updater/usb_updater build/cr50/ec.bin  (sudo if needed)

Note that you may need to rebuild ec.bin in order to see any
difference after the update. If the A & B images are identical,
the RO bootloader always picks A.

Change-Id: I385ce89a9abe2059d52da2d82a0b92b9b3e3c93f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/339220
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>

2016-04-15 15:09:08 -07:00

..

dcrypto

CR50: add support for HKDF (RFC 5869)

2016-04-14 17:28:21 -07:00

loader

cr50: improve loader logic to consider build timestamp as well

2016-02-12 15:33:54 -08:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

CR50: add support for HKDF (RFC 5869)

2016-04-14 17:28:21 -07:00

clock.c

cr50: Detect debug cable and switch the PHY

2016-04-13 20:10:38 -07:00

config_chip.h

Cr50: Add userspace tool to update RW FW over USB

2016-04-12 19:00:31 -07:00

flash_config.h

cr50: allow board to provide flash configuration

2016-02-17 12:01:31 -08:00

flash.c

Cr50: Modify flash write to account for erase block boundaries

2016-03-02 20:26:31 -08:00

gpio.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

idle.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

jtag.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rdd.c

cr50: Detect debug cable and switch the PHY

2016-04-13 20:10:38 -07:00

registers.h

Cr50: Add console command "usb" for testing

2016-04-07 20:13:52 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

cr50: adds the SPI master driver

2015-12-21 14:58:54 -08:00

sps_tpm.c

Cr50: Sleep only when SPS has been quiet for a while

2016-04-03 10:27:39 -07:00

sps.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

Cr50: Include low-power exit triggers in reset causes

2016-03-30 20:38:13 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

uartn.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

uartn.h

cr50: enable use of multiple UARTs

2016-03-31 14:53:54 -07:00

upgrade_fw.c

Cr50: New usb_upgrade module for RW updates

2016-04-12 19:00:31 -07:00

upgrade_fw.h

Cr50: Update the USB VID:PID:subclass constants

2016-04-15 15:09:08 -07:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

cr50: forward console through USB

2016-04-07 13:00:41 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_upgrade.c

Cr50: Update the USB VID:PID:subclass constants

2016-04-15 15:09:08 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

g: Add USB_STREAM_CONFIG_FULL macro to usb-stream.h

2016-04-11 14:36:44 -07:00

usb.c

cr50: Detect debug cable and switch the PHY

2016-04-13 20:10:38 -07:00

watchdog.c

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00