Gwendal Grignou 2a929afefb motion: Fix for FIFO support and BMI150 ...

- Compass was not set properly if default config is set to
disable it (frequency == 0). We were trying to set it up
while stuck in debug mode.
- BMI150 FIFO collects sensor info even when suspended.
Ask FIFO to ommit suspended sensors.
- FIx compliation issue on nucleo-f411 board, where
MKBP is not enabled.
- Fix location of __packed arguement.

BRANCH=smaug
BUG=none
TEST=Check the compass is back with accelinfo,
FIFO is not filled with garbage with fiforead.
Check by echoing in in_accel_z_calibbias that the format
of MOTIONSENSE_CMD_SENSOR_OFFSET has not changed.

Change-Id: I7ebec12a14a74b8385b9f9532562a1fd0213f4d7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284929
Reviewed-by: Alec Berg <alecaberg@chromium.org>

2015-07-15 03:39:21 +00:00

..

battery

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

charger

bq2598x: ryu: take into account hardware input current optimizer

2015-07-01 02:15:19 +00:00

led

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

tcpm

tcpc: use initialization complete alert bit to signal readiness

2015-06-30 19:02:57 +00:00

temp_sensor

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

accel_kxcj9.c

driver: bmi160 Add code for calibration

2015-07-15 03:39:12 +00:00

accel_kxcj9.h

driver: kxcj9: Add bias offset code

2015-07-09 07:53:38 +00:00

accelgyro_bmi160.c

motion: Fix for FIFO support and BMI150

2015-07-15 03:39:21 +00:00

accelgyro_bmi160.h

driver: bmi160 Add code for calibration

2015-07-15 03:39:12 +00:00

accelgyro_lsm6ds0.c

driver: bmi160 Add code for calibration

2015-07-15 03:39:12 +00:00

accelgyro_lsm6ds0.h

driver: lsm6ds0: Add bias offset code

2015-07-09 07:53:47 +00:00

als_isl29035.c

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

als_isl29035.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

build.mk

usb_mux: Add support for Parade PS8740 chip

2015-06-30 17:18:40 +00:00

ina2xx.c

Extend INA231 driver to support INA219 on Plankton

2014-10-18 07:38:30 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

mag_bmm150.h

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

mcdp28x0.c

mcdp28x0: Add more useful error codes.

2015-06-11 05:40:11 +00:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb30532.h

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

ps8740.h

usb_mux: Add support for Parade PS8740 chip

2015-06-30 17:18:40 +00:00

regulator_ir357x.c

cprints: Revert some changes from CPRINTF to CPRINTS

2014-07-03 02:52:35 +00:00

tsu6721.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_mux_pi3usb30532.c

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

usb_mux_ps8740.c

usb_mux: Add support for Parade PS8740 chip

2015-06-30 17:18:40 +00:00

usb_mux.c

usb_mux: Add driver interface for USB-C muxes

2015-06-30 17:18:37 +00:00

usb_switch_pi3usb9281.c

usb: pi3usb9281: Allow flexible chip configurations

2015-06-12 16:37:39 +00:00

usb_switch_tsu6721.c

tsu6721: add function to control output pins

2014-06-13 03:12:45 +00:00