Shawn Nematbakhsh 5b7cfac64e usb: pi3usb9281: Allow flexible chip configurations ...

Previously we supported using a single pi3usb9281 chip, or using two
chips on the same i2c bus behind a mux. Now that we need to support a
third configuration of multiple chips on different busses, it makes
sense to be able to configure the configuration freely at the board
level.

BUG=chrome-os-partner:40920
TEST=Manual on samus_pd. Plug USB charger, verify detection is correct
on both charge ports.
BRANCH=None

Change-Id: I120dcb1c3ceb6f013b92407effcd8cb66e7ffcce
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276511
Reviewed-by: Alec Berg <alecaberg@chromium.org>

2015-06-12 16:37:39 +00:00

..

battery

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

charger

charger: Add Intersil charger ISL9237

2015-06-08 21:49:02 +00:00

led

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

temp_sensor

samus: new algorithm for tmp006 object temperature

2014-10-22 00:30:31 +00:00

accel_kxcj9.c

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

accel_kxcj9.h

samus: added gyro support for lsm6ds0

2014-08-26 03:05:55 +00:00

accelgyro_bmi160.c

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

accelgyro_bmi160.h

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

accelgyro_lsm6ds0.c

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

accelgyro_lsm6ds0.h

driver: Use common data structure to store default accel values

2015-05-12 23:35:51 +00:00

als_isl29035.c

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

als_isl29035.h

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

build.mk

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

ina2xx.c

Extend INA231 driver to support INA219 on Plankton

2014-10-18 07:38:30 +00:00

ina2xx.h

Extend INA231 driver to support INA219 on Plankton

2014-10-18 07:38:30 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

mag_bmm150.h

driver: Add BMM150 behind BMI160 support.

2015-05-16 04:17:15 +00:00

mcdp28x0.c

mcdp28x0: Add more useful error codes.

2015-06-11 05:40:11 +00:00

mcdp28x0.h

mcdp28x0: Add more useful error codes.

2015-06-11 05:40:11 +00:00

pi3usb9281.h

usb: pi3usb9281: Allow flexible chip configurations

2015-06-12 16:37:39 +00:00

pi3usb30532.h

oak: add initial support for oak board rev1

2015-05-27 05:04:14 +00:00

regulator_ir357x.c

cprints: Revert some changes from CPRINTF to CPRINTS

2014-07-03 02:52:35 +00:00

tsu6721.h

tsu6721: add function to control output pins

2014-06-13 03:12:45 +00:00

usb_switch_pi3usb9281.c

usb: pi3usb9281: Allow flexible chip configurations

2015-06-12 16:37:39 +00:00

usb_switch_pi3usb30532.c

oak: add initial support for oak board rev1

2015-05-27 05:04:14 +00:00

usb_switch_tsu6721.c

tsu6721: add function to control output pins

2014-06-13 03:12:45 +00:00