Vijay Hiremath cb190ca868 charger: Settings for charger current in no battery condition ...

In case of no battery condition, current code sets the charger input
current to the charger maximum input current. To avoid damage to the
board, set the charger input current to the maximum current that the
board can support.

BUG=none
BRANCH=none
TEST=Manually tested on kunimitsu, removed the battery & then using EC
     console command 'charger', verified that the current value is set
     to 3000mA.

Change-Id: I94c40228a6362822c841a6e0c226bea0d3398b73
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/325522
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-02-08 20:25:19 -08:00

..

acpi.c

common: acpi: Add items to .bss.slow.

2015-11-09 12:49:36 -08:00

adc.c

stm32: adc: Add support for DMA continuous mode

2015-12-21 14:58:56 -08:00

als.c

ALS: wake up ALS task when switched to RW mode

2015-12-11 11:22:01 -08:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

blob.c

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

build.mk

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

button.c

common: button: Add items to .bss.slow.

2015-11-09 12:49:36 -08:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

charge_manager.c

charger/Kunimitsu: Fix for boot from cut-off battery

2016-02-02 23:48:33 -08:00

charge_ramp.c

charger: Move USB charger / BC1.2 task to common code

2015-06-10 19:48:08 +00:00

charge_state_v1.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

charge_state_v2.c

charger: Settings for charger current in no battery condition

2016-02-08 20:25:19 -08:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

add the 'extension' command framework

2015-11-17 14:40:26 -08:00

console.c

ec3po: Add compatibility for older EC images.

2015-11-26 01:39:36 -08:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

extension.c

add the 'extension' command framework

2015-11-17 14:40:26 -08:00

extpower_gpio.c

Initialize the memory-mapped AC_PRESENT flag

2015-05-28 03:18:06 +00:00

fan.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

firmware_image.lds.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

firmware_image.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

flash.c

cleanup: Remove superfluous #defines

2015-09-25 18:05:27 -07:00

fmap.c

fmap: note fmap_name dependency

2016-02-08 13:47:49 -08:00

gesture.c

gesture: fix double tap doesn't always work in suspend

2015-09-29 11:28:40 -07:00

gpio.c

GPIO: Simplify configuration

2016-01-20 14:25:32 -08:00

hooks.c

ec: Add a chipset reset hook

2016-01-25 21:46:48 -08:00

host_command_master.c

common: host_command_master: Add buf to .bss.slow.

2015-11-09 12:49:43 -08:00

host_command_pd.c

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

host_command.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

common: Fix sleep mask for multi-port lock.

2016-02-04 19:15:06 -08:00

inductive_charging.c

ryu: improve inductive charging control

2015-01-30 05:11:06 +00:00

keyboard_8042_sharedlib.c

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.c

Keyboard: Add a macro to conditionally compile the console commands

2015-08-28 18:09:06 -07:00

keyboard_mkbp.c

oak: enable MBKP events for PD events

2015-08-31 22:59:52 -07:00

keyboard_scan.c

keyboard: Fix kbpress after recent keyboard change

2016-01-04 16:26:21 -08:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: fix max lightbar brightness

2015-09-25 09:13:34 -07:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

Standard Power/Charging LED Behavior

2015-01-14 21:49:36 +00:00

lid_angle.c

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.c

lid_switch: allow to specify several lid GPIOs

2015-07-23 22:38:06 +00:00

lightbar.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

system: Add support to reclaim space from loader.

2015-10-13 21:58:01 -07:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

common: math: Stop using FP_BITS directly.

2015-09-15 17:56:17 -07:00

memory_commands.c

md console command can dump memory in more formats

2015-09-16 14:49:59 -07:00

mkbp_event.c

keyboard_mkbp: set the key pressed event to wakeup AP

2015-12-07 06:43:13 -08:00

motion_lid.c

ectool: provide lid angle info

2015-11-25 18:15:38 -08:00

motion_sense.c

motion: Set interrupt interval properly for sensor in force mode

2015-12-01 01:11:11 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

pd_log.c

common: pd_log: Add PD log to .bss.slow.

2015-11-08 10:07:38 -08:00

port80.c

common: port80: Add items to .bss.slow.

2015-11-11 12:58:37 -08:00

power_button_x86.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

power_button.c

cleanup: Fix signed vs unsigned typing

2016-02-03 21:34:47 -08:00

printf.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

pwm.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

queue_policies.c

Stream: Remove in_stream/out_stream interface

2015-06-11 00:08:49 +00:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

cleanup: Handle signed RW images a bit cleaner

2015-09-25 19:36:37 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

samus_pd: make shmem command optional, disable on samus_pd

2015-02-24 00:27:42 +00:00

smbus.c

smbus: Don't use shared memory buffer for word writes

2015-02-04 23:32:42 +00:00

spi_commands.c

common: spi: Add a delay after write commands.

2015-11-19 02:18:10 -08:00

spi_flash_reg.c

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

spi_flash.c

mec1322: Ensure flash operation has completed before returning.

2015-09-29 14:42:05 -07:00

spi_nor.c

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

vboot_hash: Properly handle hash of zero-byte region

2016-01-20 18:25:42 -08:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

thermal.c

Fan: Allow fan at max speed during the boot time.

2015-12-03 02:22:01 -08:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

common: Add __fls function

2015-09-21 01:13:54 -07:00

tpm_registers.c

CR50: Add initialization code required by TPM2 compliance tests.

2016-02-05 06:02:46 -08:00

uart_buffering.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

usb_charger.c

usb_charger: disconnect usb switch until connection is debounced

2015-11-11 11:00:53 -08:00

usb_pd_policy.c

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

usb_pd_protocol.c

pd: Reinitialize state variables on TCPC reset

2016-02-02 23:48:04 -08:00

usb_pd_tcpc.c

tcpc: add 2 bytes into TX byte count register

2015-12-05 02:05:44 -08:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

vboot_hash.c

vboot_hash: Properly handle hash of zero-byte region

2016-01-20 18:25:42 -08:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

Make builds repeatable.

2015-09-24 12:46:28 -07:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00