Files
OpenCellular/board/ryu/board.h
Todd Broch efb28cc783 Add CONFIG_CMD_HASH to optionally remove 'hash' console command.
Create optional config to remove 'hash' console command and undef it
for a few space-constrained boards (ryu*, samus_pd).

Signed-off-by: Todd Broch <tbroch@chromium.org>

BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual,

- compile for ryu, samus_pd and save ~400bytes
- 'hash' command no longer appears as a console command

Change-Id: I054fd4473911dd362c2c1d171ee7aaad859d893a
Reviewed-on: https://chromium-review.googlesource.com/238433
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
2015-01-06 04:45:53 +00:00

144 lines
3.5 KiB
C

/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* ryu board configuration */
#ifndef __BOARD_H
#define __BOARD_H
/* 48 MHz SYSCLK clock frequency */
#define CPU_CLOCK 48000000
/* the UART console is on USART2 (PD4/PD5) */
#undef CONFIG_UART_CONSOLE
#define CONFIG_UART_CONSOLE 2
/* By default, enable all console messages excepted USB */
#define CC_DEFAULT (CC_ALL & ~CC_MASK(CC_USBPD))
/* Optional features */
#undef CONFIG_CMD_HASH
#define CONFIG_FORCE_CONSOLE_RESUME
#define CONFIG_STM_HWTIMER32
#define CONFIG_USB_POWER_DELIVERY
#define CONFIG_USB_PD_DUAL_ROLE
#define CONFIG_USB_PD_FLASH_ERASE_CHECK
#define CONFIG_USB_PD_INTERNAL_COMP
#define CONFIG_USB_SWITCH_PI3USB9281
#define CONFIG_USBC_SS_MUX
#define CONFIG_USBC_VCONN
#define CONFIG_ADC
#define CONFIG_HW_CRC
#define CONFIG_I2C
#define CONFIG_LID_SWITCH
#define CONFIG_VBOOT_HASH
#define CONFIG_WATCHDOG_HELP
#undef CONFIG_TASK_PROFILING
#define CONFIG_INDUCTIVE_CHARGING
#undef CONFIG_HIBERNATE
#undef CONFIG_UART_TX_DMA /* DMAC_CH7 is used by USB PD */
#define CONFIG_UART_RX_DMA
#define CONFIG_UART_RX_DMA_CH STM32_DMAC_USART2_RX
/* Charging/Power configuration */
#undef CONFIG_BATTERY_RYU /* TODO implement */
#define CONFIG_BATTERY_BQ27541
#define CONFIG_BATTERY_CUT_OFF
#define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD
#define CONFIG_BATTERY_REVIVE_DISCONNECT
#define CONFIG_CHARGER
#define CONFIG_CHARGER_V2
#define CONFIG_CHARGER_BQ24773
#define CONFIG_CHARGER_ILIM_PIN_DISABLED
#define CONFIG_CHARGER_SENSE_RESISTOR 5
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
#define CONFIG_CHARGER_INPUT_CURRENT 512
#define CONFIG_CHARGER_DISCHARGE_ON_AC
#define CONFIG_CHIPSET_TEGRA
#define CONFIG_PMIC_FW_LONG_PRESS_TIMER
#define CONFIG_POWER_COMMON
#define CONFIG_POWER_BUTTON
#define CONFIG_POWER_BUTTON_ACTIVE_STATE 1
/* I2C ports configuration */
#define I2C_PORT_MASTER 0
#define I2C_PORT_SLAVE 1
#define I2C_PORT_EC I2C_PORT_SLAVE
#define I2C_PORT_CHARGER I2C_PORT_MASTER
#define I2C_PORT_BATTERY I2C_PORT_MASTER
#define I2C_PORT_LIGHTBAR I2C_PORT_MASTER
/* slave address for host commands */
#ifdef HAS_TASK_HOSTCMD
#define CONFIG_HOSTCMD_I2C_SLAVE_ADDR 0x3c
#endif
/* USB Configuration */
#define CONFIG_USB
#define CONFIG_USB_PID 0x500f
/* Prevent the USB driver from initializing at boot */
#define CONFIG_USB_INHIBIT_INIT
/* USB interface indexes (use define rather than enum to expand them) */
#define USB_IFACE_CONSOLE 0
#define USB_IFACE_COUNT 1
/* USB endpoint indexes (use define rather than enum to expand them) */
#define USB_EP_CONTROL 0
#define USB_EP_CONSOLE 1
#define USB_EP_COUNT 2
/* Enable console over USB */
#define CONFIG_USB_CONSOLE
/* Enable Case Closed Debugging */
#define CONFIG_CASE_CLOSED_DEBUG
#ifndef __ASSEMBLER__
/* Timer selection */
#define TIM_CLOCK32 5
#define TIM_WATCHDOG 19
#include "gpio_signal.h"
enum power_signal {
TEGRA_XPSHOLD = 0,
TEGRA_SUSPEND_ASSERTED,
/* Number of power signals */
POWER_SIGNAL_COUNT
};
/* ADC signal */
enum adc_channel {
ADC_VBUS = 0,
ADC_CC1_PD,
ADC_CC2_PD,
ADC_IADP,
ADC_IBAT,
/* Number of ADC channels */
ADC_CH_COUNT
};
/* USB string indexes */
enum usb_strings {
USB_STR_DESC = 0,
USB_STR_VENDOR,
USB_STR_PRODUCT,
USB_STR_VERSION,
USB_STR_CONSOLE_NAME,
USB_STR_COUNT
};
/* Discharge battery when on AC power for factory test. */
int board_discharge_on_ac(int enable);
#endif /* !__ASSEMBLER__ */
#endif /* __BOARD_H */