scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-10 01:21:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
e4deceba8d6a8afff50ca2223be59b755ee3eca2
OpenCellular/test/test_config.h
Sam Hurst c91dbb26d8 PD: Make current USB PD Stack REV 3 compliant 
Implement the following required features in the USB PD Rev. 3.0
specification.

Not_supported control message: Inform a port partner that a
particular message is not supported.
Battery capabilities extended message: Report battery design
capacity and last full charge capacity.
Battery status data message: Report battery state of charge
Collision avoidance: New scheme to avoid collisions caused when both
source and sink want to send messages.

Cable communication: Only the VCONN source can communicate with the
cable plug. This is NOT implemented because although the drivers have
the capability of communicating with a cable plug, the PD stack doesn't
currently need to talk to a cable plug. This is okay since the current
PD design doesn't source or sink more than 3 amps and all Type-C cables
are required to be 3 amp capable.

BUG=b:64411727
BRANCH=None
TEST=`make -j buildall`
Passed relevant PD Rev 2.0 compliance tests
Successful PD negotiation with PD Rev 2.0 and 3.0 chargers
Tested with low power none PD charger.
Modified a Kevin to operate as a PD 3.0 charger and sent
all required messages and verified the return messages.
Also tested collision avoidance by verifying that a sink only
transmits when the source indicates it's okay.
Used Twinkie to verify that PD was operating as v3.0.
Signed-off-by: Sam Hurst <shurst@chromium.org>

Change-Id: Ifd77e92ec4e9106236f9221393d2bfb97263d979
Reviewed-on: https://chromium-review.googlesource.com/603003
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2017-10-24 15:30:15 -07:00

288 lines
7.0 KiB
C
Raw Blame History

/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Per-test config flags */
#ifndef __TEST_TEST_CONFIG_H
#define __TEST_TEST_CONFIG_H
/* Test config flags only apply for test builds */
#ifdef TEST_BUILD
/* Host commands are sorted. */
#define CONFIG_HOSTCMD_SECTION_SORTED
/* Don't compile features unless specifically testing for them */
#undef CONFIG_VBOOT_HASH
#undef CONFIG_USB_PD_LOGGING
#ifdef TEST_BASE32
#define CONFIG_BASE32
#endif
#ifdef TEST_BKLIGHT_LID
#define CONFIG_BACKLIGHT_LID
#endif
#ifdef TEST_BKLIGHT_PASSTHRU
#define CONFIG_BACKLIGHT_LID
#define CONFIG_BACKLIGHT_REQ_GPIO GPIO_PCH_BKLTEN
#endif
#ifdef TEST_KB_8042
#define CONFIG_KEYBOARD_PROTOCOL_8042
#endif
#ifdef TEST_KB_MKBP
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_MKBP_EVENT
#endif
#ifdef TEST_KB_SCAN
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_MKBP_EVENT
#endif
#ifdef TEST_MATH_UTIL
#define CONFIG_MATH_UTIL
#endif
#ifdef TEST_MOTION_LID
#define CONFIG_LID_ANGLE
#define CONFIG_LID_ANGLE_INVALID_CHECK
#define CONFIG_LID_ANGLE_TABLET_MODE
#define CONFIG_LID_ANGLE_SENSOR_BASE 0
#define CONFIG_LID_ANGLE_SENSOR_LID 1
#define CONFIG_TABLET_MODE
#endif
#ifdef TEST_RMA_AUTH
/* Test server public and private keys */
#define RMA_TEST_SERVER_PUBLIC_KEY { \
0x03, 0xae, 0x2d, 0x2c, 0x06, 0x23, 0xe0, 0x73, \
0x0d, 0xd3, 0xb7, 0x92, 0xac, 0x54, 0xc5, 0xfd, \
0x7e, 0x9c, 0xf0, 0xa8, 0xeb, 0x7e, 0x2a, 0xb5, \
0xdb, 0xf4, 0x79, 0x5f, 0x8a, 0x0f, 0x28, 0x3f}
#define RMA_TEST_SERVER_PRIVATE_KEY { \
0x47, 0x3b, 0xa5, 0xdb, 0xc4, 0xbb, 0xd6, 0x77, \
0x20, 0xbd, 0xd8, 0xbd, 0xc8, 0x7a, 0xbb, 0x07, \
0x03, 0x79, 0xba, 0x7b, 0x52, 0x8c, 0xec, 0xb3, \
0x4d, 0xaa, 0x69, 0xf5, 0x65, 0xb4, 0x31, 0xad}
#define RMA_TEST_SERVER_KEY_ID 0x10
#define CONFIG_BASE32
#define CONFIG_CURVE25519
#define CONFIG_RMA_AUTH
#define CONFIG_RMA_AUTH_SERVER_PUBLIC_KEY RMA_TEST_SERVER_PUBLIC_KEY
#define CONFIG_RMA_AUTH_SERVER_KEY_ID RMA_TEST_SERVER_KEY_ID
#define CONFIG_RNG
#define CONFIG_SHA256
#define CC_EXTENSION CC_COMMAND
#endif
#ifdef TEST_RSA
#define CONFIG_RSA
#define CONFIG_RSA_KEY_SIZE 2048
#define CONFIG_RWSIG_TYPE_RWSIG
#endif
#ifdef TEST_RSA3
#define CONFIG_RSA
#define CONFIG_RSA_KEY_SIZE 2048
#define CONFIG_RSA_EXPONENT_3
#define CONFIG_RWSIG_TYPE_RWSIG
#endif
#ifdef TEST_SHA256
#define CONFIG_SHA256
#endif
#ifdef TEST_SHA256_UNROLLED
#define CONFIG_SHA256
#define CONFIG_SHA256_UNROLLED
#endif
#ifdef TEST_SHMALLOC
#define CONFIG_MALLOC
#endif
#ifdef TEST_SBS_CHARGING_V2
#define CONFIG_BATTERY
#define CONFIG_BATTERY_MOCK
#define CONFIG_BATTERY_SMART
#define CONFIG_CHARGER
#define CONFIG_CHARGER_V2
#define CONFIG_CHARGER_PROFILE_OVERRIDE
#define CONFIG_CHARGER_INPUT_CURRENT 4032
#define CONFIG_CHARGER_DISCHARGE_ON_AC
#define CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
int board_discharge_on_ac(int enabled);
#define I2C_PORT_MASTER 0
#define I2C_PORT_BATTERY 0
#define I2C_PORT_CHARGER 0
#endif
#ifdef TEST_THERMAL
#define CONFIG_CHIPSET_CAN_THROTTLE
#define CONFIG_FANS 1
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define CONFIG_TEMP_SENSOR
#define CONFIG_THROTTLE_AP
#define CONFIG_THERMISTOR_NCP15WB
#define I2C_PORT_THERMAL 0
int ncp15wb_calculate_temp(uint16_t adc);
#endif
#ifdef TEST_FAN
#define CONFIG_FANS 1
#endif
#ifdef TEST_BUTTON
#define CONFIG_BUTTON_COUNT 2
#define CONFIG_KEYBOARD_PROTOCOL_8042
#endif
#ifdef TEST_BATTERY_GET_PARAMS_SMART
#define CONFIG_BATTERY_MOCK
#define CONFIG_BATTERY_SMART
#define CONFIG_CHARGER_INPUT_CURRENT 4032
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define I2C_PORT_MASTER 0
#define I2C_PORT_BATTERY 0
#define I2C_PORT_CHARGER 0
#endif
#ifdef TEST_LIGHTBAR
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define I2C_PORT_LIGHTBAR 0
#define CONFIG_ALS_LIGHTBAR_DIMMING 0
#endif
#if defined(TEST_USB_PD) || defined(TEST_USB_PD_GIVEBACK) || \
defined(TEST_USB_PD_REV30)
#define CONFIG_USB_POWER_DELIVERY
#define CONFIG_USB_PD_CUSTOM_VDM
#define CONFIG_USB_PD_DUAL_ROLE
#define CONFIG_USB_PD_PORT_COUNT 2
#define CONFIG_USB_PD_TCPC
#define CONFIG_USB_PD_TCPM_STUB
#define CONFIG_SHA256
#define CONFIG_SW_CRC
#ifdef TEST_USB_PD_REV30
#define CONFIG_USB_PD_REV30
#define CONFIG_USB_PID 0x5000
#endif
#ifdef TEST_USB_PD_GIVEBACK
#define CONFIG_USB_PD_GIVE_BACK
#endif
#endif /* TEST_USB_PD || TEST_USB_PD_GIVEBACK || TEST_USB_PD_REV30 */
#if defined(TEST_CHARGE_MANAGER) || defined(TEST_CHARGE_MANAGER_DRP_CHARGING)
#define CONFIG_CHARGE_MANAGER
#define CONFIG_USB_PD_DUAL_ROLE
#define CONFIG_USB_PD_PORT_COUNT 2
#define CONFIG_BATTERY
#define CONFIG_BATTERY_SMART
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define I2C_PORT_BATTERY 0
#endif /* TEST_CHARGE_MANAGER_* */
#ifdef TEST_CHARGE_MANAGER_DRP_CHARGING
#define CONFIG_CHARGE_MANAGER_DRP_CHARGING
#else
#undef CONFIG_CHARGE_MANAGER_DRP_CHARGING
#endif /* TEST_CHARGE_MANAGER_DRP_CHARGING */
#ifdef TEST_CHARGE_RAMP
#define CONFIG_CHARGE_RAMP_SW
#define CONFIG_USB_PD_PORT_COUNT 2
#endif
#ifdef TEST_NVMEM
#define CONFIG_FLASH_NVMEM
#define CONFIG_FLASH_NVMEM_OFFSET_A 0x1000
#define CONFIG_FLASH_NVMEM_OFFSET_B 0x4000
#define CONFIG_FLASH_NVMEM_BASE_A (CONFIG_PROGRAM_MEMORY_BASE + \
CONFIG_FLASH_NVMEM_OFFSET_A)
#define CONFIG_FLASH_NVMEM_BASE_B (CONFIG_PROGRAM_MEMORY_BASE + \
CONFIG_FLASH_NVMEM_OFFSET_B)
#define CONFIG_FLASH_NVMEM_SIZE 0x4000
#define CONFIG_SW_CRC
#define NVMEM_PARTITION_SIZE \
(CONFIG_FLASH_NVMEM_SIZE / NVMEM_NUM_PARTITIONS)
/* User buffer definitions for test purposes */
#define NVMEM_USER_2_SIZE 0x201
#define NVMEM_USER_1_SIZE 0x402
#define NVMEM_USER_0_SIZE (NVMEM_PARTITION_SIZE - \
NVMEM_USER_2_SIZE - NVMEM_USER_1_SIZE - \
sizeof(struct nvmem_tag))
#ifndef __ASSEMBLER__
enum nvmem_users {
NVMEM_USER_0,
NVMEM_USER_1,
NVMEM_USER_2,
NVMEM_NUM_USERS
};
#endif
#endif
#ifdef TEST_NVMEM_VARS
#define NVMEM_PARTITION_SIZE 0x3000
#define CONFIG_FLASH_NVMEM_VARS
#ifndef __ASSEMBLER__
/* Define the user region numbers */
enum nvmem_users {
CONFIG_FLASH_NVMEM_VARS_USER_NUM,
NVMEM_NUM_USERS
};
/* Define a test var. */
enum nvmem_vars {
NVMEM_VAR_TEST_VAR,
};
#endif
#define CONFIG_FLASH_NVMEM_VARS_USER_SIZE 600
#endif /* TEST_NVMEM_VARS */
#ifdef TEST_RTC
#define CONFIG_HOSTCMD_RTC
#endif
#ifdef TEST_VBOOT
#define CONFIG_RWSIG
#define CONFIG_SHA256
#define CONFIG_RSA
#define CONFIG_RWSIG_TYPE_RWSIG
#define CONFIG_RW_B
#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF
#undef CONFIG_RO_SIZE
#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE / 4)
#undef CONFIG_RW_SIZE
#define CONFIG_RW_SIZE CONFIG_RO_SIZE
#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF
#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \
CONFIG_RW_SIZE)
#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \
CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE)
#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \
CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE)
#endif
#ifdef TEST_X25519
#define CONFIG_CURVE25519
#endif /* TEST_X25519 */
#endif /* TEST_BUILD */
#endif /* __TEST_TEST_CONFIG_H */
Reference in New Issue View Git Blame Copy Permalink