OpenCellular/board/reef_it8320/board.c

/* Copyright 2017 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* reef_it8320 board-specific configuration */

#include "adc.h"
#include "adc_chip.h"
#include "button.h"
#include "charge_manager.h"
#include "charge_ramp.h"
#include "charge_state.h"
#include "charger.h"
#include "chipset.h"
#include "console.h"
#include "driver/charger/bd9995x.h"
#include "driver/tcpm/it83xx_pd.h"
#include "driver/tcpm/tcpm.h"
#include "extpower.h"
#include "ec2i_chip.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "intc.h"
#include "keyboard_scan.h"
#include "lid_angle.h"
#include "lid_switch.h"
#include "math_util.h"
#include "motion_sense.h"
#include "motion_lid.h"
#include "power.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "spi.h"
#include "switch.h"
#include "system.h"
#include "tablet_mode.h"
#include "task.h"
#include "temp_sensor.h"
#include "thermistor.h"
#include "timer.h"
#include "uart.h"
#include "usb_charge.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"
#include "util.h"

#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)

#define IN_ALL_SYS_PG	POWER_SIGNAL_MASK(X86_ALL_SYS_PG)
#define IN_PGOOD_PP3300	POWER_SIGNAL_MASK(X86_PGOOD_PP3300)
#define IN_PGOOD_PP5000	POWER_SIGNAL_MASK(X86_PGOOD_PP5000)

#include "gpio_list.h"

/* power signal list.  Must match order of enum power_signal. */
const struct power_signal_info power_signal_list[] = {
	{GPIO_RSMRST_L_PGOOD,     1, "RSMRST_L"},
	{GPIO_PCH_SLP_S3_L,       1, "SLP_S3_DEASSERTED"},
	{GPIO_PCH_SLP_S4_L,       1, "SLP_S4_DEASSERTED"},
	{GPIO_SUSPWRNACK,         1, "SUSPWRNACK_DEASSERTED"},

	{GPIO_ALL_SYS_PGOOD,      1, "ALL_SYS_PGOOD"},
	{GPIO_PP3300_PG,          1, "PP3300_PG"},
	{GPIO_PP5000_PG,          1, "PP5000_PG"},
};
BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);

/* ADC channels */
const struct adc_t adc_channels[] = {
	/* Convert to mV (3000mV/1024). */
	{"CHARGER",     3000, 1024, 0, 1}, /* GPI1 */
	{"AMBIENT",     3000, 1024, 0, 2}, /* GPI2 */
	{"BRD_ID",      3000, 1024, 0, 3}, /* GPI3 */
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);

const struct i2c_port_t i2c_ports[]  = {
	{"mux",       IT83XX_I2C_CH_C, 400,
		GPIO_EC_I2C_C_SCL, GPIO_EC_I2C_C_SDA},
	{"batt",      IT83XX_I2C_CH_E, 100,
		GPIO_EC_I2C_E_SCL, GPIO_EC_I2C_E_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);

const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = {
	{-1, -1, &it83xx_tcpm_drv, 0},
	{-1, -1, &it83xx_tcpm_drv, 0},
};

void board_pd_vconn_ctrl(int port, int cc_pin, int enabled)
{
	int cc1_enabled = 0, cc2_enabled = 0;

	if (cc_pin)
		cc2_enabled = enabled;
	else
		cc1_enabled = enabled;

	if (port) {
		gpio_set_level(GPIO_USB_C1_CC2_VCONN_EN, cc2_enabled);
		gpio_set_level(GPIO_USB_C1_CC1_VCONN_EN, cc1_enabled);
	} else {
		gpio_set_level(GPIO_USB_C0_CC2_VCONN_EN, !cc2_enabled);
		gpio_set_level(GPIO_USB_C0_CC1_VCONN_EN, !cc1_enabled);
	}
}

/*
 * PD host event status for host command
 * Note: this variable must be aligned on 4-byte boundary because we pass the
 * address to atomic_ functions which use assembly to access them.
 */
static uint32_t pd_host_event_status __aligned(4);

static int hc_pd_host_event_status(struct host_cmd_handler_args *args)
{
	struct ec_response_host_event_status *r = args->response;

	/* Read and clear the host event status to return to AP */
	r->status = atomic_read_clear(&pd_host_event_status);

	args->response_size = sizeof(*r);
	return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_PD_HOST_EVENT_STATUS, hc_pd_host_event_status,
		     EC_VER_MASK(0));

/* Send host event up to AP */
void pd_send_host_event(int mask)
{
	/* mask must be set */
	if (!mask)
		return;

	atomic_or(&pd_host_event_status, mask);
	/* interrupt the AP */
	host_set_single_event(EC_HOST_EVENT_PD_MCU);
}

const enum gpio_signal hibernate_wake_pins[] = {
	GPIO_AC_PRESENT,
	GPIO_LID_OPEN,
	GPIO_POWER_BUTTON_L,
};

const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);

static void it83xx_tcpc_update_hpd_status(int port, int hpd_lvl, int hpd_irq)
{
	enum gpio_signal gpio =
		port ? GPIO_USB_C1_HPD_1P8_ODL : GPIO_USB_C0_HPD_1P8_ODL;

	hpd_lvl = !hpd_lvl;

	gpio_set_level(gpio, hpd_lvl);
	if (hpd_irq) {
		gpio_set_level(gpio, 1);
		msleep(1);
		gpio_set_level(gpio, hpd_lvl);
	}
}

struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_COUNT] = {
	{
		.port_addr = 0xa8,
		.driver = &pi3usb30532_usb_mux_driver,
		.hpd_update = &it83xx_tcpc_update_hpd_status,
	},
	{
		.port_addr = 0x20,
		.driver = &ps8740_usb_mux_driver,
		.hpd_update = &it83xx_tcpc_update_hpd_status,
	},
};

const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
	GPIO_USB1_ENABLE,
};

/*
 * Data derived from Seinhart-Hart equation in a resistor divider circuit with
 * Vdd=3300mV, R = 13.7Kohm, and Murata NCP15WB-series thermistor (B = 4050,
 * T0 = 298.15, nominal resistance (R0) = 47Kohm).
 */
#define CHARGER_THERMISTOR_SCALING_FACTOR 13
static const struct thermistor_data_pair charger_thermistor_data[] = {
	{ 3044 / CHARGER_THERMISTOR_SCALING_FACTOR, 0 },
	{ 2890 / CHARGER_THERMISTOR_SCALING_FACTOR, 10 },
	{ 2680 / CHARGER_THERMISTOR_SCALING_FACTOR, 20 },
	{ 2418 / CHARGER_THERMISTOR_SCALING_FACTOR, 30 },
	{ 2117 / CHARGER_THERMISTOR_SCALING_FACTOR, 40 },
	{ 1800 / CHARGER_THERMISTOR_SCALING_FACTOR, 50 },
	{ 1490 / CHARGER_THERMISTOR_SCALING_FACTOR, 60 },
	{ 1208 / CHARGER_THERMISTOR_SCALING_FACTOR, 70 },
	{ 966 / CHARGER_THERMISTOR_SCALING_FACTOR, 80 },
	{ 860 / CHARGER_THERMISTOR_SCALING_FACTOR, 85 },
	{ 766 / CHARGER_THERMISTOR_SCALING_FACTOR, 90 },
	{ 679 / CHARGER_THERMISTOR_SCALING_FACTOR, 95 },
	{ 603 / CHARGER_THERMISTOR_SCALING_FACTOR, 100 },
};

static const struct thermistor_info charger_thermistor_info = {
	.scaling_factor = CHARGER_THERMISTOR_SCALING_FACTOR,
	.num_pairs = ARRAY_SIZE(charger_thermistor_data),
	.data = charger_thermistor_data,
};

int board_get_charger_temp(int idx, int *temp_ptr)
{
	int mv = adc_read_channel(ADC_TEMP_SENSOR_CHARGER);

	if (mv < 0)
		return -1;

	*temp_ptr = thermistor_linear_interpolate(mv, &charger_thermistor_info);
	*temp_ptr = C_TO_K(*temp_ptr);
	return 0;
}

/*
 * Data derived from Seinhart-Hart equation in a resistor divider circuit with
 * Vdd=3300mV, R = 51.1Kohm, and Murata NCP15WB-series thermistor (B = 4050,
 * T0 = 298.15, nominal resistance (R0) = 47Kohm).
 */
#define AMB_THERMISTOR_SCALING_FACTOR 11
static const struct thermistor_data_pair amb_thermistor_data[] = {
	{ 2512 / AMB_THERMISTOR_SCALING_FACTOR, 0 },
	{ 2158 / AMB_THERMISTOR_SCALING_FACTOR, 10 },
	{ 1772 / AMB_THERMISTOR_SCALING_FACTOR, 20 },
	{ 1398 / AMB_THERMISTOR_SCALING_FACTOR, 30 },
	{ 1070 / AMB_THERMISTOR_SCALING_FACTOR, 40 },
	{ 803 / AMB_THERMISTOR_SCALING_FACTOR, 50 },
	{ 597 / AMB_THERMISTOR_SCALING_FACTOR, 60 },
	{ 443 / AMB_THERMISTOR_SCALING_FACTOR, 70 },
	{ 329 / AMB_THERMISTOR_SCALING_FACTOR, 80 },
	{ 285 / AMB_THERMISTOR_SCALING_FACTOR, 85 },
	{ 247 / AMB_THERMISTOR_SCALING_FACTOR, 90 },
	{ 214 / AMB_THERMISTOR_SCALING_FACTOR, 95 },
	{ 187 / AMB_THERMISTOR_SCALING_FACTOR, 100 },
};

static const struct thermistor_info amb_thermistor_info = {
	.scaling_factor = AMB_THERMISTOR_SCALING_FACTOR,
	.num_pairs = ARRAY_SIZE(amb_thermistor_data),
	.data = amb_thermistor_data,
};

int board_get_ambient_temp(int idx, int *temp_ptr)
{
	int mv = adc_read_channel(ADC_TEMP_SENSOR_AMB);

	if (mv < 0)
		return -1;

	*temp_ptr = thermistor_linear_interpolate(mv, &amb_thermistor_info);
	*temp_ptr = C_TO_K(*temp_ptr);
	return 0;
}

const struct temp_sensor_t temp_sensors[] = {
	/* FIXME(dhendrix): tweak action_delay_sec */
	{"Battery", TEMP_SENSOR_TYPE_BATTERY, charge_get_battery_temp, 0, 1},
	{"Ambient", TEMP_SENSOR_TYPE_BOARD, board_get_ambient_temp, 0, 5},
	{"Charger", TEMP_SENSOR_TYPE_BOARD, board_get_charger_temp, 1, 1},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);

const struct button_config buttons[CONFIG_BUTTON_COUNT] = {
	{"Volume Down", KEYBOARD_BUTTON_VOLUME_DOWN, GPIO_EC_VOLDN_BTN_ODL,
	 30 * MSEC, 0},
	{"Volume Up", KEYBOARD_BUTTON_VOLUME_UP, GPIO_EC_VOLUP_BTN_ODL,
	 30 * MSEC, 0},
};

/* Called by APL power state machine when transitioning from G3 to S5 */
static void chipset_pre_init(void)
{
	/*
	 * No need to re-init PMIC since settings are sticky across sysjump.
	 * However, be sure to check that PMIC is already enabled. If it is
	 * then there's no need to re-sequence the PMIC.
	 */
	if (system_jumped_to_this_image() && gpio_get_level(GPIO_PMIC_EN))
		return;

	/* Enable PP5000 before PP3300 due to NFC: chrome-os-partner:50807 */
	gpio_set_level(GPIO_EN_PP5000, 1);
	while (!gpio_get_level(GPIO_PP5000_PG))
		;

	/*
	 * To prevent SLP glitches, PMIC_EN (V5A_EN) should be enabled
	 * at the same time as PP3300 (chrome-os-partner:51323).
	 */
	/* Enable 3.3V rail */
	gpio_set_level(GPIO_EN_PP3300, 1);
	while (!gpio_get_level(GPIO_PP3300_PG))
		;

	/* Enable PMIC */
	gpio_set_level(GPIO_PMIC_EN, 1);
}
DECLARE_HOOK(HOOK_CHIPSET_PRE_INIT, chipset_pre_init, HOOK_PRIO_DEFAULT);

/* Initialize board. */
static void board_init(void)
{
	int port;

	/* Enable charger interrupts */
	gpio_enable_interrupt(GPIO_CHARGER_INT_L);

	/*
	* Initialize HPD to low; after sysjump SOC needs to see
	* HPD pulse to enable video path
	*/
	for (port = 0; port < CONFIG_USB_PD_PORT_COUNT; port++)
		usb_muxes[port].hpd_update(port, 0, 0);
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_INIT_I2C + 1);

int pd_snk_is_vbus_provided(int port)
{
	enum bd9995x_charge_port bd9995x_port = 0;

	switch (port) {
	case 0:
	case 1:
		bd9995x_port = bd9995x_pd_port_to_chg_port(port);
		break;
	default:
		panic("Invalid charge port\n");
		break;
	}

	return bd9995x_is_vbus_provided(bd9995x_port);
}

/**
 * Set active charge port -- only one port can be active at a time.
 *
 * @param charge_port   Charge port to enable.
 *
 * Returns EC_SUCCESS if charge port is accepted and made active,
 * EC_ERROR_* otherwise.
 */
int board_set_active_charge_port(int charge_port)
{
	enum bd9995x_charge_port bd9995x_port = 0;
	int bd9995x_port_select = 1;
	static int initialized;

	/*
	 * Reject charge port disable if our battery is critical and we
	 * have yet to initialize a charge port - continue to charge using
	 * charger ROM / POR settings.
	 */
	if (!initialized &&
	    charge_port == CHARGE_PORT_NONE &&
	    charge_get_percent() < 2)
		return -1;

	switch (charge_port) {
	case 0:
	case 1:
		/* Don't charge from a source port */
		if (board_vbus_source_enabled(charge_port))
			return -1;

		bd9995x_port = bd9995x_pd_port_to_chg_port(charge_port);
		break;
	case CHARGE_PORT_NONE:
		bd9995x_port_select = 0;
		bd9995x_port = BD9995X_CHARGE_PORT_BOTH;

		/*
		 * To avoid inrush current from the external charger, enable
		 * discharge on AC till the new charger is detected and
		 * charge detect delay has passed.
		 */
		if (charge_get_percent() > 2)
			charger_discharge_on_ac(1);
		break;
	default:
		panic("Invalid charge port\n");
		break;
	}

	CPRINTS("New chg p%d", charge_port);
	initialized = 1;

	return bd9995x_select_input_port(bd9995x_port, bd9995x_port_select);
}

/**
 * Set the charge limit based upon desired maximum.
 *
 * @param port          Port number.
 * @param supplier      Charge supplier type.
 * @param charge_ma     Desired charge limit (mA).
 * @param charge_mv     Negotiated charge voltage (mV).
 */
void board_set_charge_limit(int port, int supplier, int charge_ma,
			    int max_ma, int charge_mv)
{
	/* Enable charging trigger by BC1.2 detection */
	int bc12_enable = (supplier == CHARGE_SUPPLIER_BC12_CDP ||
			   supplier == CHARGE_SUPPLIER_BC12_DCP ||
			   supplier == CHARGE_SUPPLIER_BC12_SDP ||
			   supplier == CHARGE_SUPPLIER_OTHER);

	if (bd9995x_bc12_enable_charging(port, bc12_enable))
		return;

	charge_ma = (charge_ma * 95) / 100;
	charge_set_input_current_limit(MAX(charge_ma,
				   CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
}

/**
 * Return whether ramping is allowed for given supplier
 */
int board_is_ramp_allowed(int supplier)
{
	/* Don't allow ramping in RO when write protected */
	if (system_get_image_copy() != SYSTEM_IMAGE_RW
		&& system_is_locked())
		return 0;
	else
		return (supplier == CHARGE_SUPPLIER_BC12_DCP ||
			supplier == CHARGE_SUPPLIER_BC12_SDP ||
			supplier == CHARGE_SUPPLIER_BC12_CDP ||
			supplier == CHARGE_SUPPLIER_OTHER);
}

/**
 * Return the maximum allowed input current
 */
int board_get_ramp_current_limit(int supplier, int sup_curr)
{
	return bd9995x_get_bc12_ilim(supplier);
}

/**
 * Return if board is consuming full amount of input current
 */
int board_is_consuming_full_charge(void)
{
	int chg_perc = charge_get_percent();

	return chg_perc > 2 && chg_perc < 95;
}

/**
 * Return if VBUS is sagging too low
 */
int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state)
{
	return charger_get_vbus_voltage(port) < BD9995X_BC12_MIN_VOLTAGE;
}

/* Called on AP S5 -> S3 transition */
static void board_chipset_startup(void)
{
	/* Enable USB-A port. */
	gpio_set_level(GPIO_USB1_ENABLE, 1);

	/* Enable Trackpad */
	gpio_set_level(GPIO_EN_P3300_TRACKPAD_ODL, 0);
}
DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT);

/* Called on AP S3 -> S5 transition */
static void board_chipset_shutdown(void)
{
	/* Disable USB-A port. */
	gpio_set_level(GPIO_USB1_ENABLE, 0);

	/* Disable Trackpad */
	gpio_set_level(GPIO_EN_P3300_TRACKPAD_ODL, 1);

	/* FIXME(dhendrix): Drive USB_PD_RST_ODL low to prevent
	 * leakage? (see comment in schematic)
	 */
}
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT);

/* FIXME(dhendrix): Add CHIPSET_RESUME and CHIPSET_SUSPEND
 * hooks to enable/disable sensors?
 */
/* Called on AP S3 -> S0 transition */
static void board_chipset_resume(void)
{
	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1);
}
DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);

/* Called on AP S0 -> S3 transition */
static void board_chipset_suspend(void)
{
	gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0);
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);

/*
 * FIXME(dhendrix): Weak symbol hack until we can get a better solution for
 * both Amenia and Reef.
 */
void chipset_do_shutdown(void)
{
	/* Disable PMIC */
	gpio_set_level(GPIO_PMIC_EN, 0);

	/*Disable 3.3V rail */
	gpio_set_level(GPIO_EN_PP3300, 0);
	while (gpio_get_level(GPIO_PP3300_PG))
		;

	/*Disable 5V rail */
	gpio_set_level(GPIO_EN_PP5000, 0);
	while (gpio_get_level(GPIO_PP5000_PG))
		;
}

void board_hibernate_late(void)
{
	int i;
	const uint32_t hibernate_pins[][2] = {
		/* Turn off LEDs in hibernate */
		{GPIO_BAT_LED_BLUE, GPIO_INPUT | GPIO_PULL_UP},
		{GPIO_BAT_LED_AMBER, GPIO_INPUT | GPIO_PULL_UP},
		{GPIO_LID_OPEN, GPIO_INT_RISING | GPIO_PULL_DOWN},

		/*
		 * BD99956 handles charge input automatically. We'll disable
		 * charge output in hibernate. Charger will assert ACOK_OD
		 * when VBUS or VCC are plugged in.
		 */
		{GPIO_USB_C0_5V_EN,       GPIO_INPUT  | GPIO_PULL_DOWN},
		{GPIO_USB_C1_5V_EN,       GPIO_INPUT  | GPIO_PULL_DOWN},
	};

	/* Change GPIOs' state in hibernate for better power consumption */
	for (i = 0; i < ARRAY_SIZE(hibernate_pins); ++i)
		gpio_set_flags(hibernate_pins[i][0], hibernate_pins[i][1]);
}

void board_hibernate(void)
{
	/*
	 * To support hibernate called from console commands, ectool commands
	 * and key sequence, shutdown the AP before hibernating.
	 */
	chipset_do_shutdown();

	/* Added delay to allow AP to settle down */
	msleep(100);

	/* Enable both the VBUS & VCC ports before entering PG3 */
	bd9995x_select_input_port(BD9995X_CHARGE_PORT_BOTH, 1);

	/* Turn BGATE OFF for saving the power */
	bd9995x_set_power_save_mode(BD9995X_PWR_SAVE_MAX);
}

struct {
	enum reef_it8320_board_version version;
	int thresh_mv;
} const reef_it8320_board_versions[] = {
	/* Vin = 3.3V, R1 = 46.4K, R2 values listed below */
	{ BOARD_VERSION_1, 328 * 1.03 },  /* 5.11 Kohm */
	{ BOARD_VERSION_2, 670 * 1.03 },  /* 11.8 Kohm */
	{ BOARD_VERSION_3, 1012 * 1.03 }, /* 20.5 Kohm */
	{ BOARD_VERSION_4, 1357 * 1.03 }, /* 32.4 Kohm */
	{ BOARD_VERSION_5, 1690 * 1.03 }, /* 48.7 Kohm */
	{ BOARD_VERSION_6, 2020 * 1.03 }, /* 73.2 Kohm */
	{ BOARD_VERSION_7, 2352 * 1.03 }, /* 115 Kohm */
	{ BOARD_VERSION_8, 2802 * 1.03 }, /* 261 Kohm */
};
BUILD_ASSERT(ARRAY_SIZE(reef_it8320_board_versions) == BOARD_VERSION_COUNT);

int board_get_version(void)
{
	static int version = BOARD_VERSION_UNKNOWN;
	int mv, i;

	if (version != BOARD_VERSION_UNKNOWN)
		return version;

	/* FIXME(dhendrix): enable ADC */
	gpio_set_flags(GPIO_EC_BRD_ID_EN_ODL, GPIO_ODR_HIGH);
	gpio_set_level(GPIO_EC_BRD_ID_EN_ODL, 0);
	/* Wait to allow cap charge */
	msleep(1);
	mv = adc_read_channel(ADC_BOARD_ID);
	/* FIXME(dhendrix): disable ADC */
	gpio_set_level(GPIO_EC_BRD_ID_EN_ODL, 1);
	gpio_set_flags(GPIO_EC_BRD_ID_EN_ODL, GPIO_INPUT);

	if (mv == ADC_READ_ERROR) {
		version = BOARD_VERSION_UNKNOWN;
		return version;
	}

	for (i = 0; i < BOARD_VERSION_COUNT; i++) {
		if (mv < reef_it8320_board_versions[i].thresh_mv) {
			version = reef_it8320_board_versions[i].version;
			break;
		}
	}

	CPRINTS("Board version: %d", version);
	return version;
}

/* Keyboard scan setting */
struct keyboard_scan_config keyscan_config = {
	/*
	 * F3 key scan cycle completed but scan input is not
	 * charging to logic high when EC start scan next
	 * column for "T" key, so we set .output_settle_us
	 * to 80us from 50us.
	 */
	.output_settle_us = 80,
	.debounce_down_us = 9 * MSEC,
	.debounce_up_us = 30 * MSEC,
	.scan_period_us = 3 * MSEC,
	.min_post_scan_delay_us = 1000,
	.poll_timeout_us = 100 * MSEC,
	.actual_key_mask = {
		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
	},
};

/* PNPCFG settings */
const struct ec2i_t pnpcfg_settings[] = {
	/* Select logical device 06h(keyboard) */
	{HOST_INDEX_LDN, LDN_KBC_KEYBOARD},
	/* Set IRQ=01h for logical device */
	{HOST_INDEX_IRQNUMX, 0x01},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},

	/* Select logical device 05h(mouse) */
	{HOST_INDEX_LDN, LDN_KBC_MOUSE},
	/* Set IRQ=0Ch for logical device */
	{HOST_INDEX_IRQNUMX, 0x0C},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},

	/* Select logical device 11h(PM1 ACPI) */
	{HOST_INDEX_LDN, LDN_PMC1},
	/* Set IRQ=00h for logical device */
	{HOST_INDEX_IRQNUMX, 0x00},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},

	/* Select logical device 12h(PM2) */
	{HOST_INDEX_LDN, LDN_PMC2},
	/* I/O Port Base Address 200h/204h */
	{HOST_INDEX_IOBAD0_MSB, 0x02},
	{HOST_INDEX_IOBAD0_LSB, 0x00},
	{HOST_INDEX_IOBAD1_MSB, 0x02},
	{HOST_INDEX_IOBAD1_LSB, 0x04},
	/* Set IRQ=00h for logical device */
	{HOST_INDEX_IRQNUMX, 0x00},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},

	/* Select logical device 0Fh(SMFI) */
	{HOST_INDEX_LDN, LDN_SMFI},
	/* H2RAM LPC I/O cycle Dxxx */
	{HOST_INDEX_DSLDC6, 0x00},
	/* Enable H2RAM LPC I/O cycle */
	{HOST_INDEX_DSLDC7, 0x01},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},

	/* Select logical device 17h(PM3) */
	{HOST_INDEX_LDN, LDN_PMC3},
	/* I/O Port Base Address 80h */
	{HOST_INDEX_IOBAD0_MSB, 0x00},
	{HOST_INDEX_IOBAD0_LSB, 0x80},
	{HOST_INDEX_IOBAD1_MSB, 0x00},
	{HOST_INDEX_IOBAD1_LSB, 0x00},
	/* Set IRQ=00h for logical device */
	{HOST_INDEX_IRQNUMX, 0x00},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},
	/* Select logical device 10h(RTCT) */
	{HOST_INDEX_LDN, LDN_RTCT},
	/* P80L Begin Index */
	{HOST_INDEX_DSLDC4, P80L_P80LB},
	/* P80L End Index */
	{HOST_INDEX_DSLDC5, P80L_P80LE},
	/* P80L Current Index */
	{HOST_INDEX_DSLDC6, P80L_P80LC},
#ifdef CONFIG_UART_HOST
	/* Select logical device 2h(UART2) */
	{HOST_INDEX_LDN, LDN_UART2},
	/*
	 * I/O port base address is 2F8h.
	 * Host can use LPC I/O port 0x2F8 ~ 0x2FF to access UART2.
	 * See specification 7.24.4 for more detial.
	 */
	{HOST_INDEX_IOBAD0_MSB, 0x02},
	{HOST_INDEX_IOBAD0_LSB, 0xF8},
	/* IRQ number is 3 */
	{HOST_INDEX_IRQNUMX, 0x03},
	/*
	 * Interrupt Request Type Select
	 * bit1, 0: IRQ request is buffered and applied to SERIRQ.
	 *       1: IRQ request is inverted before being applied to SERIRQ.
	 * bit0, 0: Edge triggered mode.
	 *       1: Level triggered mode.
	 */
	{HOST_INDEX_IRQTP, 0x02},
	/* Enable logical device */
	{HOST_INDEX_LDA, 0x01},
#endif
};
BUILD_ASSERT(ARRAY_SIZE(pnpcfg_settings) == EC2I_SETTING_COUNT);