Vic Yang f322e1b96a Set power LED to green when we are trickle charging nearly full ...

When battery is nearly full, battery sometimes demands for very low
current and we are actually trickle charging. This causes the last part
of charging process very long, but the actual charged amount is only few
mAh. Let's set power LED to green in this case so that user doesn't feel
the device is charging forever.

BUG=chrome-os-partner:11248
TEST=Charge the battery to nearly full. Disconnect and connect AC power.
     Check the power LED is green when we are trickle charging.

Change-Id: Ide108778232e9f1d3abe6b61af7518af25040d10
Reviewed-on: https://gerrit.chromium.org/gerrit/27264
Commit-Ready: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>

2012-07-18 09:31:27 -07:00

..

adc.h

Added HOOK_INIT for driver module inits

2012-04-19 13:08:58 -07:00

battery_pack.h

Cleanup - includes go in include dir

2012-05-25 09:59:58 -07:00

battery.h

Trickle charging state and minor bugs fix

2012-04-19 01:16:01 +08:00

charge_state.h

Set power LED to green when we are trickle charging nearly full

2012-07-18 09:31:27 -07:00

charger_bq24725.h

Cleanup - includes go in include dir

2012-05-25 09:59:58 -07:00

charger.h

Clean up inits

2012-04-19 11:08:28 -07:00

chip_temp_sensor.h

Clean up inits

2012-04-19 11:08:28 -07:00

chipset.h

Change polarity of PROCHOT signal to match EVT

2012-05-14 16:07:17 -07:00

clock.h

Disable PLL at end of init

2012-04-24 09:59:31 -07:00

common.h

Include board and config headers in common.h

2012-06-29 10:22:49 -07:00

console.h

Simplify host event processing

2012-07-12 18:22:24 -07:00

ec_commands.h

Rename section A to RW, to match other platforms

2012-07-17 14:40:59 -07:00

eeprom.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

eoption.h

Remove fake dev switch

2012-07-10 14:56:05 -07:00

flash.h

Flash pre-init reboots if it needs to clear protection registers

2012-07-16 17:49:10 -07:00

fpu.h

Change TMP006 temperature calculation to use FP.

2012-02-15 16:34:54 -08:00

gpio.h

gpio: Add fast access to GPIO level

2012-07-02 22:35:52 -07:00

hooks.h

Disable touchscreen when lid is closed and in S3

2012-05-21 16:30:12 -07:00

host_command.h

Add second copy of event state

2012-07-12 18:21:32 -07:00

hwtimer.h

stm32: Use a timer as the watchdog warning

2012-07-02 22:35:51 -07:00

i2c.h

Implement board-level I2C arbitration

2012-06-29 10:46:22 -07:00

i8042.h

Assorted keyboard module cleanup

2012-05-31 15:03:17 -07:00

jtag.h

Add JTAG module

2012-01-11 11:37:55 -08:00

keyboard_scan.h

Refactor boot key detection

2012-06-26 17:01:52 -07:00

keyboard.h

Misc keyboard module cleanup

2012-06-07 09:59:55 -07:00

lightbar_msg_list.h

Create host-side lightbar bikeshedding tool.

2012-04-26 13:57:19 -07:00

lightbar.h

Add LPC lightbar command to get the current sequence.

2012-05-08 12:03:49 -07:00

lpc.h

Simplify host event processing

2012-07-12 18:22:24 -07:00

memory_commands.h

Initial sources import 2/3

2011-12-07 19:10:02 +00:00

onewire.h

Added HOOK_INIT for driver module inits

2012-04-19 13:08:58 -07:00

panic.h

Add a dedicated panic() function

2012-06-22 11:12:40 -07:00

peci.h

Added HOOK_INIT for driver module inits

2012-04-19 13:08:58 -07:00

pmu_tpschrome.h

Initialize PMU default settings using board configuration

2012-07-03 23:51:19 -07:00

port80.h

Clean up inits

2012-04-19 11:08:28 -07:00

power_button.h

Refactor boot key detection

2012-06-26 17:01:52 -07:00

power_led.h

Daisy/Snow: Drive power LED with PWM

2012-07-02 15:26:02 -07:00

powerdemo.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

printf.h

Move printf() formatting to its own file to enable re-use

2012-06-07 00:54:02 -07:00

pwm.h

Add 'fanduty' command both EC console and ectool.

2012-06-22 15:56:57 -07:00

queue.h

Refactor the i8042 module to be thread-safe.

2012-06-07 20:48:51 -07:00

shared_mem.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

smart_battery_stub.h

Stub smart battery read/write functions

2012-06-27 03:22:17 -07:00

smart_battery.h

Stub smart battery read/write functions

2012-06-27 03:22:17 -07:00

spi.h

Add basic SPI support to link

2012-05-30 13:12:34 -07:00

system.h

Rename section A to RW, to match other platforms

2012-07-17 14:40:59 -07:00

task_id.h

Change task messages to events

2012-04-06 09:06:53 -07:00

task.h

usleep() chains to udelay() if called before task_start()

2012-05-29 09:38:58 -07:00

temp_sensor.h

Disable thermal thresholds for TMP006 sensor near CPU

2012-06-22 11:12:43 -07:00

thermal.h

Increase fan speed control to 5 steps.

2012-04-05 11:30:16 +08:00

timer.h

Add time_since32() to return microseconds since a start time

2012-06-28 17:06:46 -07:00

tmp006.h

Add a way to set indiviual sensitivity factor for each TMP006 sensor

2012-05-28 16:42:17 +08:00

uart.h

Move printf() formatting to its own file to enable re-use

2012-06-07 00:54:02 -07:00

usb_charge.h

Add hooks for chipset power transitions

2012-05-09 16:09:10 -07:00

util.h

Make ASSERT() report assertion failures

2012-06-22 10:13:36 -07:00

vboot.h

Flash pre-init reboots if it needs to clear protection registers

2012-07-16 17:49:10 -07:00

version.h

Use __packed instead of __attribute__((packed))

2012-06-28 17:40:39 -07:00

watchdog.h

Move watchdog_trace() into the generic watchdog file

2012-06-15 13:39:22 -07:00

x86_power.h

Refactor async console output

2012-04-24 17:46:54 -07:00