Mary Ruthven fa643a9fc7 cr50: add support for creating multiple serial endpoints ...

CR50 will need three serial endpoints for the streaming AP and EC UART
and exporting its own console through USB. This change adds a macro to
create endpoints that can be recognized by the usb_serial driver.

BUG=chrome-os-partner:50702
BRANCH=none
TEST=Verify "/dev/google/Cr50*/serial/Blob" prints capital letters when
lower case letters are input.

Change-Id: Iddf2c957a00dc3cd5448a6a00de2cf61ef5dd84c
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/336441
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

2016-04-07 13:00:39 -07:00

..

acpi.c

common: acpi: Add items to .bss.slow.

2015-11-09 12:49:36 -08:00

adc.c

stm32: adc: Add support for DMA continuous mode

2015-12-21 14:58:56 -08:00

als.c

ALS: wake up ALS task when switched to RW mode

2015-12-11 11:22:01 -08:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

build.mk

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

button.c

common: button: Add items to .bss.slow.

2015-11-09 12:49:36 -08:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

charge_manager.c

charge_manager: Report UNKNOWN USB charger for 2 seconds after change

2016-04-03 10:27:36 -07:00

charge_ramp.c

charger: Move USB charger / BC1.2 task to common code

2015-06-10 19:48:08 +00:00

charge_state_v1.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

charge_state_v2.c

charger: Settings for charger current in no battery condition

2016-02-08 20:25:19 -08:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

Console: Fix channel enum values

2016-03-22 19:54:46 -07:00

console.c

common: console: Change console_init() string.

2016-02-23 22:40:17 -08:00

crc8.c

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

extension.c

add the 'extension' command framework

2015-11-17 14:40:26 -08:00

extpower_gpio.c

Initialize the memory-mapped AC_PRESENT flag

2015-05-28 03:18:06 +00:00

fan.c

Fan: enable fan after system resume

2016-03-30 04:37:39 -07:00

firmware_image.lds.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

firmware_image.S

cr50: add ability to include two identical RW sections in the EC image

2015-12-09 06:36:22 -08:00

flash.c

cleanup: Remove superfluous #defines

2015-09-25 18:05:27 -07:00

fmap.c

fmap: note fmap_name dependency

2016-02-08 13:47:49 -08:00

gesture.c

gesture: fix double tap doesn't always work in suspend

2015-09-29 11:28:40 -07:00

gpio_commands.c

GPIO: Move host and console commands to new file

2016-03-02 18:03:43 -08:00

gpio.c

GPIO: Move host and console commands to new file

2016-03-02 18:03:43 -08:00

hooks.c

ec: Add a chipset reset hook

2016-01-25 21:46:48 -08:00

host_command_master.c

common: host_command_master: Add buf to .bss.slow.

2015-11-09 12:49:43 -08:00

host_command_pd.c

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

host_command.c

console: Put additional console commands behind CONFIGs

2016-04-03 10:27:36 -07:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

common: Fix sleep mask for multi-port lock.

2016-02-04 19:15:06 -08:00

inductive_charging.c

ryu: improve inductive charging control

2015-01-30 05:11:06 +00:00

keyboard_8042_sharedlib.c

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.c

Keyboard: Add a macro to conditionally compile the console commands

2015-08-28 18:09:06 -07:00

keyboard_mkbp.c

oak: enable MBKP events for PD events

2015-08-31 22:59:52 -07:00

keyboard_scan.c

ectool: Support keyboard factory scanning

2016-04-01 00:21:35 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: fix max lightbar brightness

2015-09-25 09:13:34 -07:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

Standard Power/Charging LED Behavior

2015-01-14 21:49:36 +00:00

lid_angle.c

oak: enable lid angle update

2016-03-02 13:39:47 -08:00

lid_switch.c

lid_switch: allow to specify several lid GPIOs

2015-07-23 22:38:06 +00:00

lightbar.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

system: Add support to reclaim space from loader.

2015-10-13 21:58:01 -07:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

oak: Add kx022 lid accelerometer for rev5.

2016-03-01 08:25:58 -08:00

memory_commands.c

console: Put additional console commands behind CONFIGs

2016-04-03 10:27:36 -07:00

mkbp_event.c

mkbp_event: prevent unnecessary interrupts to AP

2016-03-10 06:03:08 -08:00

motion_lid.c

ectool: provide lid angle info

2015-11-25 18:15:38 -08:00

motion_sense.c

motion: Set interrupt interval properly for sensor in force mode

2015-12-01 01:11:11 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

pd_log.c

common: pd_log: Add PD log to .bss.slow.

2015-11-08 10:07:38 -08:00

port80.c

common: port80: Add items to .bss.slow.

2015-11-11 12:58:37 -08:00

power_button_x86.c

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

power_button.c

cleanup: Fix signed vs unsigned typing

2016-02-03 21:34:47 -08:00

printf.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

pwm.c

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

queue_policies.c

Stream: Remove in_stream/out_stream interface

2015-06-11 00:08:49 +00:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

cleanup: Handle signed RW images a bit cleaner

2015-09-25 19:36:37 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

samus_pd: make shmem command optional, disable on samus_pd

2015-02-24 00:27:42 +00:00

smbus.c

smbus: Re-write smbus driver

2016-03-21 16:35:33 -07:00

spi_commands.c

common: spi: Add a delay after write commands.

2015-11-19 02:18:10 -08:00

spi_flash_reg.c

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

spi_flash.c

spi_flash: print spi flash size in proper unit

2016-03-30 17:10:17 -07:00

spi_nor.c

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

Cr50: Include low-power exit triggers in reset causes

2016-03-30 20:38:13 -07:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

thermal.c

Fan: Allow fan at max speed during the boot time.

2015-12-03 02:22:01 -08:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

common: Add __fls function

2015-09-21 01:13:54 -07:00

tpm_registers.c

Cr50: cleanup: Clarify a few comments

2016-03-24 22:24:07 +00:00

uart_buffering.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

usb_charger.c

oak: avoid reading BC1.2 interrupt reg during handling vbus event

2016-03-01 19:35:48 -08:00

usb_pd_policy.c

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

usb_pd_protocol.c

pd: Add error handling for pd_send_request_msg()

2016-03-14 20:11:28 -07:00

usb_pd_tcpc.c

tcpc: add 2 bytes into TX byte count register

2015-12-05 02:05:44 -08:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

usb_port_power_smart: Support variable port count

2016-03-24 00:03:07 -07:00

util.c

CR50: move utility method reverse() to common/util.c

2016-03-07 21:56:04 -08:00

vboot_hash.c

mec1322: clock: Use full-speed 48MHz processor clock during EC boot

2016-02-09 19:51:00 -08:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

Make builds repeatable.

2015-09-24 12:46:28 -07:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00