diff --git a/packages/base/any/kernels/modules/accton_i2c_psu.c b/packages/base/any/kernels/modules/accton_i2c_psu.c new file mode 100755 index 00000000..89b54748 --- /dev/null +++ b/packages/base/any/kernels/modules/accton_i2c_psu.c @@ -0,0 +1,580 @@ +/* + * An hwmon driver for the Accton Redundant Power Module + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESCRIPTION_NAME "accton i2c psu driver" +/* PMBus Protocol. */ +#define PMBUS_LITERAL_DATA_MULTIPLIER 1000 +#define PMBUS_REGISTER_VOUT_MODE 0x20 +#define PMBUS_REGISTER_STATUS_BYTE 0x78 +#define PMBUS_REGISTER_STATUS_WORD 0x79 +#define PMBUS_REGISTER_STATUS_FAN 0x81 +#define PMBUS_REGISTER_READ_VIN 0x88 +#define PMBUS_REGISTER_READ_IIN 0x89 +#define PMBUS_REGISTER_READ_VOUT 0x8B +#define PMBUS_REGISTER_READ_IOUT 0x8C +#define PMBUS_REGISTER_READ_TEMPERATURE_1 0x8D +#define PMBUS_REGISTER_READ_TEMPERATURE_2 0x8E +#define PMBUS_REGISTER_READ_TEMPERATURE_3 0x8F +#define PMBUS_REGISTER_READ_FAN_SPEED_1 0x90 +#define PMBUS_REGISTER_READ_FAN_SPEED_2 0x91 + +#define PMBUS_REGISTER_READ_FAN_CONFIG_1 0x3A +#define PMBUS_REGISTER_FAN_COMMAND_1 0x3B + +#define PMBUS_REGISTER_READ_POUT 0x96 +#define PMBUS_REGISTER_READ_PIN 0x97 +#define PMBUS_REGISTER_MFR_ID 0x99 +#define PMBUS_REGISTER_MFR_MODEL 0x9A +#define PMBUS_REGISTER_MFR_REVISION 0x9B +#define PMBUS_REGISTER_MFR_SERIAL 0x9E + + +#define MAX_FAN_DUTY_CYCLE 100 +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct accton_i2c_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 vout_mode; /* Register value */ + u16 v_in; /* Register value */ + u16 v_out; /* Register value */ + u16 i_in; /* Register value */ + u16 i_out; /* Register value */ + u16 p_in; /* Register value */ + u16 p_out; /* Register value */ + u16 temp_input[2]; /* Register value */ + u8 fan_fault; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u16 fan_speed[2]; /* Register value */ + u8 pmbus_revision; /* Register value */ + u8 mfr_id[10]; /* Register value */ + u8 mfr_model[16]; /* Register value */ + u8 mfr_revsion[3]; /* Register value */ + u8 mfr_serial[26]; /* Register value */ +}; + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count); +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf); + +static int accton_i2c_psu_write_word(struct i2c_client *client, u8 reg, u16 value); +static struct accton_i2c_psu_data *accton_i2c_psu_update_device(struct device *dev); + +enum accton_i2c_psu_sysfs_attributes { + PSU_V_IN, + PSU_V_OUT, + PSU_I_IN, + PSU_I_OUT, + PSU_P_IN, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_FAULT, + PSU_FAN1_DUTY_CYCLE, + PSU_FAN1_SPEED, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_SERIAL, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_v_in, S_IRUGO, show_linear, NULL, PSU_V_IN); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_in, S_IRUGO, show_linear, NULL, PSU_I_IN); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_in, S_IRUGO, show_linear, NULL, PSU_P_IN); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision,S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_serial, S_IRUGO, show_ascii, NULL, PSU_MFR_SERIAL); + +static struct attribute *accton_i2c_psu_attributes[] = { + &sensor_dev_attr_psu_v_in.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_in.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_in.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_serial.dev_attr.attr, + NULL +}; + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct accton_i2c_psu_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + accton_i2c_psu_write_word(client, PMBUS_REGISTER_FAN_COMMAND_1 + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct accton_i2c_psu_data *data = accton_i2c_psu_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 0; + + switch (attr->index) { + case PSU_V_IN: + value = data->v_in; + break; + case PSU_I_IN: + value = data->i_in; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_IN: + value = data->p_in; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp_input[0]; + break; + case PSU_FAN1_DUTY_CYCLE: + multiplier = 1; + value = data->fan_duty_cycle[0]; + break; + case PSU_FAN1_SPEED: + multiplier = 1; + value = data->fan_speed[0]; + break; + default: + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + if(!multiplier) + multiplier = PMBUS_LITERAL_DATA_MULTIPLIER; + + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct accton_i2c_psu_data *data = accton_i2c_psu_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct accton_i2c_psu_data *data = accton_i2c_psu_update_device(dev); + int exponent, mantissa; + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * PMBUS_LITERAL_DATA_MULTIPLIER) : + sprintf(buf, "%d\n", (mantissa * PMBUS_LITERAL_DATA_MULTIPLIER) / (1 << -exponent)); +} + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct accton_i2c_psu_data *data = accton_i2c_psu_update_device(dev); + + if (!data->valid) { + return 0; + } + + return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : + sprintf(buf, "0\n"); +} + +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct accton_i2c_psu_data *data = accton_i2c_psu_update_device(dev); + u8 *ptr = NULL; + + if (!data->valid) { + return 0; + } + switch (attr->index) { + + case PSU_MFR_ID: + ptr = data->mfr_id; + break; + case PSU_MFR_MODEL: + ptr = data->mfr_model; + break; + case PSU_MFR_REVISION: + ptr = data->mfr_revsion; + break; + case PSU_MFR_SERIAL: + ptr = data->mfr_serial; + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", ptr); +} + + +static const struct attribute_group accton_i2c_psu_group = { + .attrs = accton_i2c_psu_attributes, +}; + +static int accton_i2c_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct accton_i2c_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct accton_i2c_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &accton_i2c_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &accton_i2c_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int accton_i2c_psu_remove(struct i2c_client *client) +{ + struct accton_i2c_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &accton_i2c_psu_group); + kfree(data); + + return 0; +} +/* Support psu moduel + */ +static const struct i2c_device_id accton_i2c_psu_id[] = { + { "acbel_fsh082", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, accton_i2c_psu_id); + +static struct i2c_driver accton_i2c_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "accton_i2c_psu", + }, + .probe = accton_i2c_psu_probe, + .remove = accton_i2c_psu_remove, + .id_table = accton_i2c_psu_id, + .address_list = normal_i2c, +}; + +static int accton_i2c_psu_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int accton_i2c_psu_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int accton_i2c_psu_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +static int accton_i2c_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + + +static int accton_i2c_psu_read_block_data(struct i2c_client *client, u8 command, u8 *data, int data_length) +{ + int status = -EIO; + int length; + u8 buffer[128] = {0}, *ptr = buffer; + + status = accton_i2c_psu_read_byte(client, command); + if (status < 0) + { + dev_dbg(&client->dev, "Unable to get data from offset 0x%02X\r\n", command); + status = -EIO; + goto EXIT_READ_BLOCK_DATA; + } + + status = (status & 0xFF) + 1; + if ( status > 128) + { + dev_dbg(&client->dev, "Unable to get big data from offset 0x%02X\r\n", command); + status = -EINVAL; + goto EXIT_READ_BLOCK_DATA; + } + + length = status; + status = accton_i2c_psu_read_block(client, command, buffer, length); + if (unlikely(status < 0)) + goto EXIT_READ_BLOCK_DATA; + if (unlikely(status != length)) { + status = -EIO; + goto EXIT_READ_BLOCK_DATA; + } + /* The first byte is the count byte of string. */ + ptr++; + status--; + + length=status>(data_length-1)?(data_length-1):status; + memcpy(data, ptr, length); + data[length-1] = 0; + +EXIT_READ_BLOCK_DATA: + + return status; +} + + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct accton_i2c_psu_data *accton_i2c_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct accton_i2c_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status, length; + u8 command, buf; + struct reg_data_byte regs_byte[] = { {PMBUS_REGISTER_VOUT_MODE, &data->vout_mode}, + {PMBUS_REGISTER_STATUS_FAN, &data->fan_fault}}; + struct reg_data_word regs_word[] = { {PMBUS_REGISTER_READ_VIN, &data->v_in}, + {PMBUS_REGISTER_READ_VOUT, &data->v_out}, + {PMBUS_REGISTER_READ_IIN, &data->i_in}, + {PMBUS_REGISTER_READ_IOUT, &data->i_out}, + {PMBUS_REGISTER_READ_POUT, &data->p_out}, + {PMBUS_REGISTER_READ_PIN, &data->p_in}, + {PMBUS_REGISTER_READ_TEMPERATURE_1, &(data->temp_input[0])}, + {PMBUS_REGISTER_READ_TEMPERATURE_2, &(data->temp_input[1])}, + {PMBUS_REGISTER_FAN_COMMAND_1, &(data->fan_duty_cycle[0])}, + {PMBUS_REGISTER_READ_FAN_SPEED_1, &(data->fan_speed[0])}, + {PMBUS_REGISTER_READ_FAN_SPEED_2, &(data->fan_speed[1])}, + }; + + dev_dbg(&client->dev, "Starting accton_i2c_psu update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = accton_i2c_psu_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = accton_i2c_psu_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + } + else { + *(regs_word[i].value) = status; + } + + } + /* Read mfr_id */ + status = accton_i2c_psu_read_block_data(client, PMBUS_REGISTER_MFR_ID, data->mfr_id, + ARRAY_SIZE(data->mfr_id)); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", PMBUS_REGISTER_MFR_ID, status); + goto exit; + } + /* Read mfr_model */ + status = accton_i2c_psu_read_block_data(client, PMBUS_REGISTER_MFR_MODEL, data->mfr_model, + ARRAY_SIZE(data->mfr_model)); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", PMBUS_REGISTER_MFR_MODEL, status); + goto exit; + } + /* Read mfr_revsion */ + status = accton_i2c_psu_read_block_data(client, PMBUS_REGISTER_MFR_REVISION, data->mfr_revsion, + ARRAY_SIZE(data->mfr_revsion)); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", PMBUS_REGISTER_MFR_REVISION, status); + goto exit; + } + /* Read mfr_serial */ + status = accton_i2c_psu_read_block_data(client, PMBUS_REGISTER_MFR_SERIAL, data->mfr_serial, + ARRAY_SIZE(data->mfr_serial)); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", PMBUS_REGISTER_MFR_SERIAL, status); + goto exit; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init accton_i2c_psu_init(void) +{ + return i2c_add_driver(&accton_i2c_psu_driver); +} + +static void __exit accton_i2c_psu_exit(void) +{ + i2c_del_driver(&accton_i2c_psu_driver); +} + +MODULE_AUTHOR("Jostar Yang "); +MODULE_DESCRIPTION(DRIVER_DESCRIPTION_NAME); +MODULE_LICENSE("GPL"); + +module_init(accton_i2c_psu_init); +module_exit(accton_i2c_psu_exit); diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/.gitignore b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/.gitignore new file mode 100755 index 00000000..38161e48 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/.gitignore @@ -0,0 +1,3 @@ +*x86*64*accton*as7816*64x*.mk +onlpdump.mk + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/PKG.yml b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/PKG.yml new file mode 100755 index 00000000..b19154f4 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-modules.yml VENDOR=accton BASENAME=x86-64-accton-as9716-32d ARCH=amd64 KERNELS="onl-kernel-4.14-lts-x86-64-all:amd64" diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/.gitignore b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/.gitignore new file mode 100755 index 00000000..a65b4177 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/.gitignore @@ -0,0 +1 @@ +lib diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/Makefile new file mode 100755 index 00000000..d72b2fdc --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/Makefile @@ -0,0 +1,6 @@ +KERNELS := onl-kernel-4.14-lts-x86-64-all:amd64 +KMODULES := $(wildcard *.c) +VENDOR := accton +BASENAME := x86-64-accton-as9716-32d +ARCH := x86_64 +include $(ONL)/make/kmodule.mk diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-cpld.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-cpld.c new file mode 100755 index 00000000..0ea4b777 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-cpld.c @@ -0,0 +1,679 @@ +/* + * Copyright (C) Brandon Chuang + * + * This module supports the accton cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Accton as9716_32d CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +enum cpld_type { + as9716_32d_fpga, + as9716_32d_cpld1, + as9716_32d_cpld2, + as9716_32d_cpld_cpu +}; + +struct as9716_32d_cpld_data { + enum cpld_type type; + struct device *hwmon_dev; + struct mutex update_lock; +}; + +static const struct i2c_device_id as9716_32d_cpld_id[] = { + { "as9716_32d_fpga", as9716_32d_fpga }, + { "as9716_32d_cpld1", as9716_32d_cpld1 }, + { "as9716_32d_cpld2", as9716_32d_cpld2 }, + { "as9716_32d_cpld_cpu", as9716_32d_cpld_cpu }, + { } +}; +MODULE_DEVICE_TABLE(i2c, as9716_32d_cpld_id); + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_TXDISABLE_ATTR_ID(index) MODULE_TXDISABLE_##index +#define TRANSCEIVER_RXLOS_ATTR_ID(index) MODULE_RXLOS_##index +#define TRANSCEIVER_TXFAULT_ATTR_ID(index) MODULE_TXFAULT_##index + +enum as9716_32d_cpld_sysfs_attributes { + CPLD_VERSION, + ACCESS, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_PRESENT_ATTR_ID(33), + TRANSCEIVER_PRESENT_ATTR_ID(34), + TRANSCEIVER_TXDISABLE_ATTR_ID(33), + TRANSCEIVER_TXDISABLE_ATTR_ID(34), + TRANSCEIVER_RXLOS_ATTR_ID(33), + TRANSCEIVER_RXLOS_ATTR_ID(34), + TRANSCEIVER_TXFAULT_ATTR_ID(33), + TRANSCEIVER_TXFAULT_ATTR_ID(34) +}; + +/* sysfs attributes for hwmon + */ +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static int as9716_32d_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as9716_32d_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +/* transceiver attributes */ +#define DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_PRESENT_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +#define DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_tx_disable_##index, S_IRUGO | S_IWUSR, show_status, set_tx_disable, MODULE_TXDISABLE_##index); \ + static SENSOR_DEVICE_ATTR(module_rx_los_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_fault_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); + +#define DECLARE_SFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_tx_disable_##index.dev_attr.attr, \ + &sensor_dev_attr_module_rx_los_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_fault_##index.dev_attr.attr + + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(32); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(33); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(34); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(33); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(34); + + +static struct attribute *as9716_32d_fpga_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + NULL +}; + +static const struct attribute_group as9716_32d_fpga_group = { + .attrs = as9716_32d_fpga_attributes, +}; + +static struct attribute *as9716_32d_cpld1_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(1), + DECLARE_TRANSCEIVER_PRESENT_ATTR(2), + DECLARE_TRANSCEIVER_PRESENT_ATTR(3), + DECLARE_TRANSCEIVER_PRESENT_ATTR(4), + DECLARE_TRANSCEIVER_PRESENT_ATTR(5), + DECLARE_TRANSCEIVER_PRESENT_ATTR(6), + DECLARE_TRANSCEIVER_PRESENT_ATTR(7), + DECLARE_TRANSCEIVER_PRESENT_ATTR(8), + DECLARE_TRANSCEIVER_PRESENT_ATTR(9), + DECLARE_TRANSCEIVER_PRESENT_ATTR(10), + DECLARE_TRANSCEIVER_PRESENT_ATTR(11), + DECLARE_TRANSCEIVER_PRESENT_ATTR(12), + DECLARE_TRANSCEIVER_PRESENT_ATTR(13), + DECLARE_TRANSCEIVER_PRESENT_ATTR(14), + DECLARE_TRANSCEIVER_PRESENT_ATTR(15), + DECLARE_TRANSCEIVER_PRESENT_ATTR(16), + NULL +}; + +static const struct attribute_group as9716_32d_cpld1_group = { + .attrs = as9716_32d_cpld1_attributes, +}; + +static struct attribute *as9716_32d_cpld2_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(17), + DECLARE_TRANSCEIVER_PRESENT_ATTR(18), + DECLARE_TRANSCEIVER_PRESENT_ATTR(19), + DECLARE_TRANSCEIVER_PRESENT_ATTR(20), + DECLARE_TRANSCEIVER_PRESENT_ATTR(21), + DECLARE_TRANSCEIVER_PRESENT_ATTR(22), + DECLARE_TRANSCEIVER_PRESENT_ATTR(23), + DECLARE_TRANSCEIVER_PRESENT_ATTR(24), + DECLARE_TRANSCEIVER_PRESENT_ATTR(25), + DECLARE_TRANSCEIVER_PRESENT_ATTR(26), + DECLARE_TRANSCEIVER_PRESENT_ATTR(27), + DECLARE_TRANSCEIVER_PRESENT_ATTR(28), + DECLARE_TRANSCEIVER_PRESENT_ATTR(29), + DECLARE_TRANSCEIVER_PRESENT_ATTR(30), + DECLARE_TRANSCEIVER_PRESENT_ATTR(31), + DECLARE_TRANSCEIVER_PRESENT_ATTR(32), + DECLARE_TRANSCEIVER_PRESENT_ATTR(33), + DECLARE_TRANSCEIVER_PRESENT_ATTR(34), + DECLARE_SFP_TRANSCEIVER_ATTR(33), + DECLARE_SFP_TRANSCEIVER_ATTR(34), + NULL +}; + +static const struct attribute_group as9716_32d_cpld2_group = { + .attrs = as9716_32d_cpld2_attributes, +}; + + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as9716_32d_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0, revert = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + reg = 0x12; + mask = 0x1 << (attr->index - MODULE_PRESENT_1); + break; + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + reg = 0x13; + mask = 0x1 << (attr->index - MODULE_PRESENT_9); + break; + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + reg = 0x12; + mask = 0x1 << (attr->index - MODULE_PRESENT_17); + break; + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + reg = 0x13; + mask = 0x1 << (attr->index - MODULE_PRESENT_25); + break; + case MODULE_PRESENT_33: + reg = 0x20; + mask = 0x1; + break; + case MODULE_PRESENT_34: + reg = 0x20; + mask = 0x8; + break; + case MODULE_RXLOS_33: + reg = 0x20; + mask = 0x2; + break; + case MODULE_RXLOS_34: + reg = 0x20; + mask = 0x10; + break; + case MODULE_TXDISABLE_33: + reg = 0x21; + mask = 0x1; + break; + case MODULE_TXDISABLE_34: + reg = 0x21; + mask = 0x2; + break; + + default: + return 0; + } + + if (attr->index >= MODULE_PRESENT_1 && attr->index <= MODULE_PRESENT_34) { + revert = 1; + } + + mutex_lock(&data->update_lock); + status = as9716_32d_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", revert ? !(status & mask) : !!(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as9716_32d_cpld_data *data = i2c_get_clientdata(client); + long disable; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + switch (attr->index) { + case MODULE_TXDISABLE_33: + reg = 0x21; + mask = 0x1; + break; + case MODULE_TXDISABLE_34: + reg = 0x21; + mask = 0x2; + break; + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as9716_32d_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update tx_disable status */ + if (disable) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as9716_32d_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as9716_32d_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as9716_32d_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static void as9716_32d_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as9716_32d_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); + } + + return sprintf(buf, "%d\n", val); +} + +/* + * I2C init/probing/exit functions + */ +static int as9716_32d_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + struct as9716_32d_cpld_data *data; + int ret = -ENODEV; + int status; + const struct attribute_group *group = NULL; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto exit; + + data = kzalloc(sizeof(struct as9716_32d_cpld_data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->type = id->driver_data; + + + /* Register sysfs hooks */ + switch (data->type) { + case as9716_32d_fpga: + group = &as9716_32d_fpga_group; + break; + case as9716_32d_cpld1: + group = &as9716_32d_cpld1_group; + break; + case as9716_32d_cpld2: + group = &as9716_32d_cpld2_group; + break; + case as9716_32d_cpld_cpu: + /* Disable CPLD reset to avoid DUT will be reset. + */ + status=as9716_32d_cpld_write_internal(client, 0x3, 0x0); + if (status < 0) + { + dev_dbg(&client->dev, "cpu_cpld reg 0x65 err %d\n", status); + } + default: + break; + } + + if (group) { + ret = sysfs_create_group(&client->dev.kobj, group); + if (ret) { + goto exit_free; + } + } + + as9716_32d_cpld_add_client(client); + return 0; + +exit_free: + kfree(data); +exit: + return ret; +} + +static int as9716_32d_cpld_remove(struct i2c_client *client) +{ + struct as9716_32d_cpld_data *data = i2c_get_clientdata(client); + const struct attribute_group *group = NULL; + + as9716_32d_cpld_remove_client(client); + + /* Remove sysfs hooks */ + switch (data->type) { + case as9716_32d_fpga: + group = &as9716_32d_fpga_group; + break; + case as9716_32d_cpld1: + group = &as9716_32d_cpld1_group; + break; + case as9716_32d_cpld2: + group = &as9716_32d_cpld2_group; + break; + default: + break; + } + + if (group) { + sysfs_remove_group(&client->dev.kobj, group); + } + + kfree(data); + + return 0; +} + +static int as9716_32d_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as9716_32d_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +int as9716_32d_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as9716_32d_cpld_read_internal(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as9716_32d_cpld_read); + +int as9716_32d_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as9716_32d_cpld_write_internal(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as9716_32d_cpld_write); + +static struct i2c_driver as9716_32d_cpld_driver = { + .driver = { + .name = "as9716_32d_cpld", + .owner = THIS_MODULE, + }, + .probe = as9716_32d_cpld_probe, + .remove = as9716_32d_cpld_remove, + .id_table = as9716_32d_cpld_id, +}; + +static int __init as9716_32d_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as9716_32d_cpld_driver); +} + +static void __exit as9716_32d_cpld_exit(void) +{ + i2c_del_driver(&as9716_32d_cpld_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("Accton I2C CPLD driver"); +MODULE_LICENSE("GPL"); + +module_init(as9716_32d_cpld_init); +module_exit(as9716_32d_cpld_exit); + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-fan.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-fan.c new file mode 100755 index 00000000..e435c0a7 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-fan.c @@ -0,0 +1,472 @@ +/* + * A hwmon driver for the Accton as7726 32x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as9716_32d_fan" + +static struct as9716_32d_fan_data *as9716_32d_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x10, /* fan 1-6 direction(0:F2B 1:B2F) */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as9716_32d_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN5_DIRECTION, + FAN6_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index) &sensor_dev_attr_fan##index##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN##index##_DUTY_CYCLE_PERCENTAGE) +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan##index##_duty_cycle_percentage.dev_attr.attr + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); +/* 6 fan direction attribute in this platform */ +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(6); +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(); + +static struct attribute *as9716_32d_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1), + DECLARE_FAN_FAULT_ATTR(2), + DECLARE_FAN_FAULT_ATTR(3), + DECLARE_FAN_FAULT_ATTR(4), + DECLARE_FAN_FAULT_ATTR(5), + DECLARE_FAN_FAULT_ATTR(6), + DECLARE_FAN_SPEED_RPM_ATTR(1), + DECLARE_FAN_SPEED_RPM_ATTR(2), + DECLARE_FAN_SPEED_RPM_ATTR(3), + DECLARE_FAN_SPEED_RPM_ATTR(4), + DECLARE_FAN_SPEED_RPM_ATTR(5), + DECLARE_FAN_SPEED_RPM_ATTR(6), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(5), + DECLARE_FAN_DIRECTION_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as9716_32d_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as9716_32d_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as9716_32d_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > FAN_MAX_DUTY_CYCLE) + return -EINVAL; + + as9716_32d_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as9716_32d_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as9716_32d_fan_data *data = as9716_32d_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], + attr->index - FAN1_DIRECTION)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as9716_32d_fan_group = { + .attrs = as9716_32d_fan_attributes, +}; + +static struct as9716_32d_fan_data *as9716_32d_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as9716_32d_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as9716_32d_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as9716_32d_fan_read_value(client, fan_reg[i]); + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as9716_32d_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as9716_32d_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as9716_32d_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as9716_32d_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as9716_32d_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as9716_32d_fan_remove(struct i2c_client *client) +{ + struct as9716_32d_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as9716_32d_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as9716_32d_fan_id[] = { + { "as9716_32d_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as9716_32d_fan_id); + +static struct i2c_driver as9716_32d_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as9716_32d_fan_probe, + .remove = as9716_32d_fan_remove, + .id_table = as9716_32d_fan_id, + .address_list = normal_i2c, +}; + +module_i2c_driver(as9716_32d_fan_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as9716_32d_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-leds.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-leds.c new file mode 100755 index 00000000..fd3367d4 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-leds.c @@ -0,0 +1,492 @@ +/* + * A LED driver for the accton_as9716_32d_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int as9716_32d_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as9716_32d_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +#define DRVNAME "accton_as9716_32d_led" + +struct accton_as9716_32d_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct accton_as9716_32d_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x61) + +#define LED_TYPE_DIAG_REG_MASK (0x1|0x2|0x4) +#define LED_MODE_DIAG_GREEN_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x02) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_GREEN_BLINK_VALUE (0x04) +#define LED_MODE_DIAG_OFF_VALUE (0x0) + + +#define LED_TYPE_LOC_REG_MASK (0x80|0x40) +#define LED_MODE_LOC_GREEN_BLIKN_VALUE 0x80 +#define LED_MODE_LOC_AMBER_VALUE 0x40 +#define LED_MODE_LOC_OFF_VALUE (0x0) + +#define LED_TYPE_FAN_REG_MASK (0x20|0x10) +#define LED_MODE_FAN_AMBER_VALUE 0x20 +#define LED_MODE_FAN_GREEN_VALUE 0x10 +#define LED_MODE_FAN_OFF_VALUE (0x0) + +#define LED_TYPE_PSU2_REG_MASK (0x8|0x4) +#define LED_MODE_PSU2_AMBER_VALUE 0x8 +#define LED_MODE_PSU2_GREEN_VALUE 0x4 +#define LED_MODE_PSU2_OFF_VALUE (0x0) + +#define LED_TYPE_PSU1_REG_MASK (0x2|0x1) +#define LED_MODE_PSU1_AMBER_VALUE 0x2 +#define LED_MODE_PSU1_GREEN_VALUE 0x1 +#define LED_MODE_PSU1_OFF_VALUE (0x0) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as9716_32d_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as9716_32d_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as9716_32d_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !accton_getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = accton_as9716_32d_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + + accton_as9716_32d_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void accton_as9716_32d_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as9716_32d_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness accton_as9716_32d_led_diag_get(struct led_classdev *cdev) +{ + accton_as9716_32d_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as9716_32d_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as9716_32d_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness accton_as9716_32d_led_loc_get(struct led_classdev *cdev) +{ + accton_as9716_32d_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void accton_as9716_32d_led_fan_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as9716_32d_led_set(led_cdev, led_light_mode, LED_TYPE_FAN); +} + +static enum led_brightness accton_as9716_32d_led_fan_get(struct led_classdev *cdev) +{ + accton_as9716_32d_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_FAN, ledctl->reg_val[0]); +} + +static void accton_as9716_32d_led_psu1_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as9716_32d_led_set(led_cdev, led_light_mode, LED_TYPE_PSU1); +} + +static enum led_brightness accton_as9716_32d_led_psu1_get(struct led_classdev *cdev) +{ + accton_as9716_32d_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU1, ledctl->reg_val[0]); +} + +static void accton_as9716_32d_led_psu2_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as9716_32d_led_set(led_cdev, led_light_mode, LED_TYPE_PSU2); +} + +static enum led_brightness accton_as9716_32d_led_psu2_get(struct led_classdev *cdev) +{ + accton_as9716_32d_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU2, ledctl->reg_val[0]); +} + +static struct led_classdev accton_as9716_32d_leds[] = { + [LED_TYPE_DIAG] = { + .name = "accton_as9716_32d_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as9716_32d_led_diag_set, + .brightness_get = accton_as9716_32d_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN_BLINK, + }, + [LED_TYPE_LOC] = { + .name = "accton_as9716_32d_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as9716_32d_led_loc_set, + .brightness_get = accton_as9716_32d_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN_BLINK, + }, + [LED_TYPE_FAN] = { + .name = "accton_as9716_32d_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as9716_32d_led_fan_set, + .brightness_get = accton_as9716_32d_led_fan_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AMBER, + }, + [LED_TYPE_PSU1] = { + .name = "accton_as9716_32d_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as9716_32d_led_psu1_set, + .brightness_get = accton_as9716_32d_led_psu1_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AMBER, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as9716_32d_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as9716_32d_led_psu2_set, + .brightness_get = accton_as9716_32d_led_psu2_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AMBER, + }, +}; + +static int accton_as9716_32d_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as9716_32d_leds); i++) { + led_classdev_suspend(&accton_as9716_32d_leds[i]); + } + + return 0; +} + +static int accton_as9716_32d_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as9716_32d_leds); i++) { + led_classdev_resume(&accton_as9716_32d_leds[i]); + } + + return 0; +} + +static int accton_as9716_32d_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as9716_32d_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as9716_32d_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as9716_32d_leds)) { + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as9716_32d_leds[i]); + } + } + + return ret; +} + +static int accton_as9716_32d_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as9716_32d_leds); i++) { + led_classdev_unregister(&accton_as9716_32d_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as9716_32d_led_driver = { + .probe = accton_as9716_32d_led_probe, + .remove = accton_as9716_32d_led_remove, + .suspend = accton_as9716_32d_led_suspend, + .resume = accton_as9716_32d_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as9716_32d_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as9716_32d_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as9716_32d_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as9716_32d_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as9716_32d_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as9716_32d_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as9716_32d_led_driver); + kfree(ledctl); +} + +module_init(accton_as9716_32d_led_init); +module_exit(accton_as9716_32d_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as9716_32d_led driver"); +MODULE_LICENSE("GPL"); diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-psu.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-psu.c new file mode 100755 index 00000000..b5aa9b79 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/modules/builds/x86-64-accton-as9716-32d-psu.c @@ -0,0 +1,311 @@ +/* + * An hwmon driver for accton as9716_32d Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_MODEL_NAME 16 +#define MAX_SERIAL_NUMBER 19 + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_string(struct device *dev, struct device_attribute *da, char *buf); +static int as9716_32d_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as9716_32d_cpld_read(unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as9716_32d_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[MAX_MODEL_NAME]; /* Model name, read from eeprom */ + char serial_number[MAX_SERIAL_NUMBER]; +}; + +static struct as9716_32d_psu_data *as9716_32d_psu_update_device(struct device *dev); + +enum as9716_32d_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD, + PSU_SERIAL_NUMBER +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_string, NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_serial_number, S_IRUGO, show_string, NULL, PSU_SERIAL_NUMBER); + + +static struct attribute *as9716_32d_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_serial_number.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as9716_32d_psu_data *data = as9716_32d_psu_update_device(dev); + u8 status = 0; + + if (attr->index == PSU_PRESENT) { + status = !(data->status >> (1-data->index) & 0x1); + } + else { /* PSU_POWER_GOOD */ + status = (data->status >> (3-data->index) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_string(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as9716_32d_psu_data *data = as9716_32d_psu_update_device(dev); + char *ptr = NULL; + + if (!data->valid) { + return -EIO; + } + + switch (attr->index) { + case PSU_MODEL_NAME: + ptr = data->model_name; + break; + case PSU_SERIAL_NUMBER: + ptr = data->serial_number; + break; + default: + return -EINVAL; + } + + return sprintf(buf, "%s\n", ptr); +} + +static const struct attribute_group as9716_32d_psu_group = { + .attrs = as9716_32d_psu_attributes, +}; + +static int as9716_32d_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as9716_32d_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as9716_32d_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as9716_32d_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as9716_32d_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as9716_32d_psu_remove(struct i2c_client *client) +{ + struct as9716_32d_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as9716_32d_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as9716_32d_psu1, + as9716_32d_psu2 +}; + +static const struct i2c_device_id as9716_32d_psu_id[] = { + { "as9716_32d_psu1", as9716_32d_psu1 }, + { "as9716_32d_psu2", as9716_32d_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as9716_32d_psu_id); + +static struct i2c_driver as9716_32d_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as9716_32d_psu", + }, + .probe = as9716_32d_psu_probe, + .remove = as9716_32d_psu_remove, + .id_table = as9716_32d_psu_id, + .address_list = normal_i2c, +}; + +static int as9716_32d_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static struct as9716_32d_psu_data *as9716_32d_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as9716_32d_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + dev_dbg(&client->dev, "Starting as9716_32d update\n"); + + /* Read psu status */ + status = as9716_32d_cpld_read(0x60, 0x3); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + memset(data->serial_number, 0, sizeof(data->serial_number)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + status = as9716_32d_psu_read_block(client, 0x20, data->model_name, + ARRAY_SIZE(data->model_name)-1); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x)\n", client->addr); + } + else { + data->model_name[ARRAY_SIZE(data->model_name)-1] = '\0'; + + } + /* Read from offset 0x2e ~ 0x3d (16 bytes) */ + status = as9716_32d_psu_read_block(client, 0x2e,data->serial_number, MAX_SERIAL_NUMBER); + if (status < 0) + { + data->serial_number[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x2e)\n", client->addr); + } + data->serial_number[MAX_SERIAL_NUMBER-1]='\0'; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(as9716_32d_psu_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as9716_32d_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/PKG.yml b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/PKG.yml new file mode 100755 index 00000000..ec571a66 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/onlp-platform-any.yml PLATFORM=x86-64-accton-as9716-32d ARCH=amd64 TOOLCHAIN=x86_64-linux-gnu diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/Makefile new file mode 100755 index 00000000..e7437cb2 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/Makefile @@ -0,0 +1,2 @@ +FILTER=src +include $(ONL)/make/subdirs.mk diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/lib/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/lib/Makefile new file mode 100755 index 00000000..46bc4719 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/lib/Makefile @@ -0,0 +1,45 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +############################################################ +include $(ONL)/make/config.amd64.mk + +MODULE := libonlp-x86-64-accton-as9716-32d +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF x86_64_accton_as9716_32d onlplib +DEPENDMODULE_HEADERS := sff + +include $(BUILDER)/dependmodules.mk + +SHAREDLIB := libonlp-x86-64-accton-as9716-32d.so +$(SHAREDLIB)_TARGETS := $(ALL_TARGETS) +include $(BUILDER)/so.mk +.DEFAULT_GOAL := $(SHAREDLIB) + +GLOBAL_CFLAGS += -I$(onlp_BASEDIR)/module/inc +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -fPIC +GLOBAL_LINK_LIBS += -lpthread + +include $(BUILDER)/targets.mk + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/onlpdump/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/onlpdump/Makefile new file mode 100755 index 00000000..190fe375 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/onlpdump/Makefile @@ -0,0 +1,46 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ +include $(ONL)/make/config.amd64.mk + +.DEFAULT_GOAL := onlpdump + +MODULE := onlpdump +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF onlp x86_64_accton_as9716_32d onlplib onlp_platform_defaults sff cjson cjson_util timer_wheel OS + +include $(BUILDER)/dependmodules.mk + +BINARY := onlpdump +$(BINARY)_LIBRARIES := $(LIBRARY_TARGETS) +include $(BUILDER)/bin.mk + +GLOBAL_CFLAGS += -DAIM_CONFIG_AIM_MAIN_FUNCTION=onlpdump_main +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MAIN=1 +GLOBAL_LINK_LIBS += -lpthread -lm + +include $(BUILDER)/targets.mk + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/.gitignore b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/.gitignore new file mode 100755 index 00000000..e69de29b diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/.module b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/.module new file mode 100755 index 00000000..7c458ec7 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/.module @@ -0,0 +1 @@ +name: x86_64_accton_as9716_32d diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/Makefile new file mode 100755 index 00000000..6b34c9e1 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/Makefile @@ -0,0 +1,9 @@ +############################################################################### +# +# +# +############################################################################### +include $(ONL)/make/config.mk +MODULE := x86_64_accton_as9716_32d +AUTOMODULE := x86_64_accton_as9716_32d +include $(BUILDER)/definemodule.mk diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/README b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/README new file mode 100755 index 00000000..952aeeb4 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/README @@ -0,0 +1,6 @@ +############################################################################### +# +# x86_64_accton_as9716_32x README +# +############################################################################### + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/auto/x86_64_accton_as9716_32d.yml b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/auto/x86_64_accton_as9716_32d.yml new file mode 100755 index 00000000..fedd53b0 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/auto/x86_64_accton_as9716_32d.yml @@ -0,0 +1,50 @@ +############################################################################### +# +# x86_64_accton_as9716_32d Autogeneration Definitions. +# +############################################################################### + +cdefs: &cdefs +- X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING: + doc: "Include or exclude logging." + default: 1 +- X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT: + doc: "Default enabled log options." + default: AIM_LOG_OPTIONS_DEFAULT +- X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT: + doc: "Default enabled log bits." + default: AIM_LOG_BITS_DEFAULT +- X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT: + doc: "Default enabled custom log bits." + default: 0 +- X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB: + doc: "Default all porting macros to use the C standard libraries." + default: 1 +- X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS: + doc: "Include standard library headers for stdlib porting macros." + default: X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB +- X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI: + doc: "Include generic uCli support." + default: 0 +- X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION: + doc: "Assume chassis fan direction is the same as the PSU fan direction." + default: 0 + + +definitions: + cdefs: + X86_64_ACCTON_AS9716_32D_CONFIG_HEADER: + defs: *cdefs + basename: x86_64_accton_as9716_32d_config + + portingmacro: + x86_64_accton_as9716_32d: + macros: + - malloc + - free + - memset + - memcpy + - strncpy + - vsnprintf + - snprintf + - strlen diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d.x b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d.x new file mode 100755 index 00000000..91cc5e6e --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d.x @@ -0,0 +1,14 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +/* <--auto.start.xmacro(ALL).define> */ +/* */ + +/* <--auto.start.xenum(ALL).define> */ +/* */ + + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_config.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_config.h new file mode 100755 index 00000000..8f3103b1 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_config.h @@ -0,0 +1,137 @@ +/**************************************************************************//** + * + * @file + * @brief x86_64_accton_as9716_32d Configuration Header + * + * @addtogroup x86_64_accton_as9716_32d-config + * @{ + * + *****************************************************************************/ +#ifndef __X86_64_ACCTON_AS9716_32D_CONFIG_H__ +#define __X86_64_ACCTON_AS9716_32D_CONFIG_H__ + +#ifdef GLOBAL_INCLUDE_CUSTOM_CONFIG +#include +#endif +#ifdef X86_64_ACCTON_AS9716_32D_INCLUDE_CUSTOM_CONFIG +#include +#endif + +/* */ +#include +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING + * + * Include or exclude logging. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING +#define X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING 1 +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT + * + * Default enabled log options. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT +#define X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT AIM_LOG_OPTIONS_DEFAULT +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT + * + * Default enabled log bits. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT +#define X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT AIM_LOG_BITS_DEFAULT +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT + * + * Default enabled custom log bits. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT +#define X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT 0 +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB + * + * Default all porting macros to use the C standard libraries. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB +#define X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB 1 +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS + * + * Include standard library headers for stdlib porting macros. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS +#define X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI + * + * Include generic uCli support. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI +#define X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI 0 +#endif + +/** + * X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION + * + * Assume chassis fan direction is the same as the PSU fan direction. */ + + +#ifndef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION +#define X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION 0 +#endif + + + +/** + * All compile time options can be queried or displayed + */ + +/** Configuration settings structure. */ +typedef struct x86_64_accton_as9716_32d_config_settings_s { + /** name */ + const char* name; + /** value */ + const char* value; +} x86_64_accton_as9716_32d_config_settings_t; + +/** Configuration settings table. */ +/** x86_64_accton_as9716_32d_config_settings table. */ +extern x86_64_accton_as9716_32d_config_settings_t x86_64_accton_as9716_32d_config_settings[]; + +/** + * @brief Lookup a configuration setting. + * @param setting The name of the configuration option to lookup. + */ +const char* x86_64_accton_as9716_32d_config_lookup(const char* setting); + +/** + * @brief Show the compile-time configuration. + * @param pvs The output stream. + */ +int x86_64_accton_as9716_32d_config_show(struct aim_pvs_s* pvs); + +/* */ + +#include "x86_64_accton_as9716_32d_porting.h" + +#endif /* __X86_64_ACCTON_AS9716_32D_CONFIG_H__ */ +/* @} */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_dox.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_dox.h new file mode 100755 index 00000000..bcd26d48 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_dox.h @@ -0,0 +1,26 @@ +/**************************************************************************//** + * + * x86_64_accton_as9716_32d Doxygen Header + * + *****************************************************************************/ +#ifndef __X86_64_ACCTON_AS9716_32D_DOX_H__ +#define __X86_64_ACCTON_AS9716_32D_DOX_H__ + +/** + * @defgroup x86_64_accton_as9716_32d x86_64_accton_as9716_32d - x86_64_accton_as9716_32d Description + * + +The documentation overview for this module should go here. + + * + * @{ + * + * @defgroup x86_64_accton_as9716_32d-x86_64_accton_as9716_32d Public Interface + * @defgroup x86_64_accton_as9716_32d-config Compile Time Configuration + * @defgroup x86_64_accton_as9716_32d-porting Porting Macros + * + * @} + * + */ + +#endif /* __X86_64_ACCTON_AS9716_32D_DOX_H__ */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_porting.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_porting.h new file mode 100755 index 00000000..a57299a2 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/inc/x86_64_accton_as9716_32d/x86_64_accton_as9716_32d_porting.h @@ -0,0 +1,107 @@ +/**************************************************************************//** + * + * @file + * @brief x86_64_accton_as9716_32d Porting Macros. + * + * @addtogroup x86_64_accton_as9716_32d-porting + * @{ + * + *****************************************************************************/ +#ifndef __X86_64_ACCTON_AS9716_32D_PORTING_H__ +#define __X86_64_ACCTON_AS9716_32D_PORTING_H__ + + +/* */ +#if X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS == 1 +#include +#include +#include +#include +#include +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_MALLOC + #if defined(GLOBAL_MALLOC) + #define X86_64_ACCTON_AS9716_32D_MALLOC GLOBAL_MALLOC + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_MALLOC malloc + #else + #error The macro X86_64_ACCTON_AS9716_32D_MALLOC is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_FREE + #if defined(GLOBAL_FREE) + #define X86_64_ACCTON_AS9716_32D_FREE GLOBAL_FREE + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_FREE free + #else + #error The macro X86_64_ACCTON_AS9716_32D_FREE is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_MEMSET + #if defined(GLOBAL_MEMSET) + #define X86_64_ACCTON_AS9716_32D_MEMSET GLOBAL_MEMSET + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_MEMSET memset + #else + #error The macro X86_64_ACCTON_AS9716_32D_MEMSET is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_MEMCPY + #if defined(GLOBAL_MEMCPY) + #define X86_64_ACCTON_AS9716_32D_MEMCPY GLOBAL_MEMCPY + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_MEMCPY memcpy + #else + #error The macro X86_64_ACCTON_AS9716_32D_MEMCPY is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_STRNCPY + #if defined(GLOBAL_STRNCPY) + #define X86_64_ACCTON_AS9716_32D_STRNCPY GLOBAL_STRNCPY + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_STRNCPY strncpy + #else + #error The macro X86_64_ACCTON_AS9716_32D_STRNCPY is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_VSNPRINTF + #if defined(GLOBAL_VSNPRINTF) + #define X86_64_ACCTON_AS9716_32D_VSNPRINTF GLOBAL_VSNPRINTF + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_VSNPRINTF vsnprintf + #else + #error The macro X86_64_ACCTON_AS9716_32D_VSNPRINTF is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_SNPRINTF + #if defined(GLOBAL_SNPRINTF) + #define X86_64_ACCTON_AS9716_32D_SNPRINTF GLOBAL_SNPRINTF + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_SNPRINTF snprintf + #else + #error The macro X86_64_ACCTON_AS9716_32D_SNPRINTF is required but cannot be defined. + #endif +#endif + +#ifndef X86_64_ACCTON_AS9716_32D_STRLEN + #if defined(GLOBAL_STRLEN) + #define X86_64_ACCTON_AS9716_32D_STRLEN GLOBAL_STRLEN + #elif X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB == 1 + #define X86_64_ACCTON_AS9716_32D_STRLEN strlen + #else + #error The macro X86_64_ACCTON_AS9716_32D_STRLEN is required but cannot be defined. + #endif +#endif + +/* */ + + +#endif /* __X86_64_ACCTON_AS9716_32D_PORTING_H__ */ +/* @} */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/make.mk b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/make.mk new file mode 100755 index 00000000..2a274b71 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/make.mk @@ -0,0 +1,10 @@ +############################################################################### +# +# +# +############################################################################### +THIS_DIR := $(dir $(lastword $(MAKEFILE_LIST))) +x86_64_accton_as9716_32d_INCLUDES := -I $(THIS_DIR)inc +x86_64_accton_as9716_32d_INTERNAL_INCLUDES := -I $(THIS_DIR)src +x86_64_accton_as9716_32d_DEPENDMODULE_ENTRIES := init:x86_64_accton_as9716_32d ucli:x86_64_accton_as9716_32d + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/Makefile new file mode 100755 index 00000000..e0738d2b --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/Makefile @@ -0,0 +1,9 @@ +############################################################################### +# +# Local source generation targets. +# +############################################################################### + +ucli: + @../../../../tools/uclihandlers.py x86_64_accton_as9716_32d_ucli.c + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/fani.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/fani.c new file mode 100755 index 00000000..e82f8a77 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/fani.c @@ -0,0 +1,367 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * Fan Platform Implementation Defaults. + * + ***********************************************************/ +#include +#include "platform_lib.h" + +#define PSU_PREFIX_PATH "/sys/bus/i2c/devices/" + +#define MAX_FAN_SPEED 25500 +#define MAX_PSU_FAN_SPEED 25500 + +enum fan_id { + FAN_1_ON_FAN_BOARD = 1, + FAN_2_ON_FAN_BOARD, + FAN_3_ON_FAN_BOARD, + FAN_4_ON_FAN_BOARD, + FAN_5_ON_FAN_BOARD, + FAN_6_ON_FAN_BOARD, + FAN_1_ON_PSU_1, + FAN_1_ON_PSU_2, +}; + +#define CHASSIS_FAN_INFO(fid) \ + { \ + { ONLP_FAN_ID_CREATE(FAN_##fid##_ON_FAN_BOARD), "Chassis Fan - "#fid, 0 },\ + 0x0,\ + ONLP_FAN_CAPS_SET_PERCENTAGE | ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE,\ + 0,\ + 0,\ + ONLP_FAN_MODE_INVALID,\ + } + +#define PSU_FAN_INFO(pid, fid) \ + { \ + { ONLP_FAN_ID_CREATE(FAN_##fid##_ON_PSU_##pid), "PSU "#pid" - Fan "#fid, 0 },\ + 0x0,\ + ONLP_FAN_CAPS_SET_PERCENTAGE | ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE,\ + 0,\ + 0,\ + ONLP_FAN_MODE_INVALID,\ + } + +/* Static fan information */ +onlp_fan_info_t finfo[] = { + { }, /* Not used */ + CHASSIS_FAN_INFO(1), + CHASSIS_FAN_INFO(2), + CHASSIS_FAN_INFO(3), + CHASSIS_FAN_INFO(4), + CHASSIS_FAN_INFO(5), + CHASSIS_FAN_INFO(6), + PSU_FAN_INFO(1,1), + PSU_FAN_INFO(2,1) +}; + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_FAN(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +static int +_onlp_fani_info_get_fan(int fid, onlp_fan_info_t* info) +{ + int value; + char path[64] = {0}; + + /* get fan present status + */ + sprintf(path, "%s""fan%d_present", FAN_BOARD_PATH, fid); + DEBUG_PRINT("Fan(%d), present path = (%s)", fid, path); + + if (onlp_file_read_int(&value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + if (value == 0) { + return ONLP_STATUS_OK; + } + info->status |= ONLP_FAN_STATUS_PRESENT; + + + /* get fan fault status (turn on when any one fails) + */ + sprintf(path, "%s""fan%d_fault", FAN_BOARD_PATH, fid); + DEBUG_PRINT("Fan(%d), fault path = (%s)", fid, path); + + if (onlp_file_read_int(&value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + if (value > 0) { + info->status |= ONLP_FAN_STATUS_FAILED; + } + + + /* get fan direction (both : the same) + */ + sprintf(path, "%s""fan%d_direction", FAN_BOARD_PATH, fid); + DEBUG_PRINT("Fan(%d), direction path = (%s)", fid, path); + + if (onlp_file_read_int(&value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + info->status |= value ? ONLP_FAN_STATUS_F2B : ONLP_FAN_STATUS_B2F; + + + /* get front fan speed + */ + sprintf(path, "%s""fan%d_front_speed_rpm", FAN_BOARD_PATH, fid); + DEBUG_PRINT("Fan (%d), front speed path = (%s)", fid, path); + + if (onlp_file_read_int(&value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + info->rpm = value; + + /* get rear fan speed + */ + sprintf(path, "%s""fan%d_rear_speed_rpm", FAN_BOARD_PATH, fid); + DEBUG_PRINT("Fan (%d), rear speed path = (%s)", fid, path); + + if (onlp_file_read_int(&value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + /* take the min value from front/rear fan speed + */ + if (info->rpm > value) { + info->rpm = value; + } + + /* get speed percentage from rpm + */ + info->percentage = (info->rpm * 100)/MAX_FAN_SPEED; + + return ONLP_STATUS_OK; +} + +static uint32_t +_onlp_get_fan_direction_on_psu(void) +{ + /* Try to read direction from PSU1. + * If PSU1 is not valid, read from PSU2 + */ + int i = 0; + + for (i = PSU1_ID; i <= PSU2_ID; i++) { + psu_type_t psu_type; + psu_type = get_psu_type(i, NULL, 0); + + if (psu_type == PSU_TYPE_UNKNOWN) { + continue; + } + + if (PSU_TYPE_AC_F2B == psu_type) { + return ONLP_FAN_STATUS_F2B; + } + else { + return ONLP_FAN_STATUS_B2F; + } + } + + return 0; +} + +static int +_onlp_fani_info_get_fan_on_psu(int pid, onlp_fan_info_t* info) +{ + int val = 0; + + info->status |= ONLP_FAN_STATUS_PRESENT; + + /* get fan direction + */ + info->status |= _onlp_get_fan_direction_on_psu(); + + /* get fan fault status + */ + if (psu_ym2651y_pmbus_info_get(pid, "psu_fan1_fault", &val) == ONLP_STATUS_OK) { + info->status |= (val > 0) ? ONLP_FAN_STATUS_FAILED : 0; + } + + /* get fan speed + */ + if (psu_ym2651y_pmbus_info_get(pid, "psu_fan1_speed_rpm", &val) == ONLP_STATUS_OK) { + info->rpm = val; + info->percentage = (info->rpm * 100) / MAX_PSU_FAN_SPEED; + } + + return ONLP_STATUS_OK; +} + +/* + * This function will be called prior to all of onlp_fani_* functions. + */ +int +onlp_fani_init(void) +{ + return ONLP_STATUS_OK; +} + +int +onlp_fani_info_get(onlp_oid_t id, onlp_fan_info_t* info) +{ + int rc = 0; + int fid; + VALIDATE(id); + + fid = ONLP_OID_ID_GET(id); + *info = finfo[fid]; + + switch (fid) + { + case FAN_1_ON_PSU_1: + rc = _onlp_fani_info_get_fan_on_psu(PSU1_ID, info); + break; + case FAN_1_ON_PSU_2: + rc = _onlp_fani_info_get_fan_on_psu(PSU2_ID, info); + break; + case FAN_1_ON_FAN_BOARD: + case FAN_2_ON_FAN_BOARD: + case FAN_3_ON_FAN_BOARD: + case FAN_4_ON_FAN_BOARD: + case FAN_5_ON_FAN_BOARD: + case FAN_6_ON_FAN_BOARD: + rc =_onlp_fani_info_get_fan(fid, info); + break; + default: + rc = ONLP_STATUS_E_INVALID; + break; + } + + return rc; +} + +/* + * This function sets the speed of the given fan in RPM. + * + * This function will only be called if the fan supprots the RPM_SET + * capability. + * + * It is optional if you have no fans at all with this feature. + */ +int +onlp_fani_rpm_set(onlp_oid_t id, int rpm) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * This function sets the fan speed of the given OID as a percentage. + * + * This will only be called if the OID has the PERCENTAGE_SET + * capability. + * + * It is optional if you have no fans at all with this feature. + */ +int +onlp_fani_percentage_set(onlp_oid_t id, int p) +{ + int fid; + char *path = NULL; + + VALIDATE(id); + + fid = ONLP_OID_ID_GET(id); + + /* reject p=0 (p=0, stop fan) */ + if (p == 0){ + return ONLP_STATUS_E_INVALID; + } + + switch (fid) + { + case FAN_1_ON_PSU_1: + return psu_ym2651y_pmbus_info_set(PSU1_ID, "psu_fan_duty_cycle_percentage", p); + case FAN_1_ON_PSU_2: + return psu_ym2651y_pmbus_info_set(PSU2_ID, "psu_fan_duty_cycle_percentage", p); + case FAN_1_ON_FAN_BOARD: + case FAN_2_ON_FAN_BOARD: + case FAN_3_ON_FAN_BOARD: + case FAN_4_ON_FAN_BOARD: + case FAN_5_ON_FAN_BOARD: + case FAN_6_ON_FAN_BOARD: + path = FAN_NODE(fan_duty_cycle_percentage); + break; + default: + return ONLP_STATUS_E_INVALID; + } + + DEBUG_PRINT("Fan path = (%s)", path); + + if (onlp_file_write_integer(path, p) < 0) { + AIM_LOG_ERROR("Unable to write data to file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + + +/* + * This function sets the fan speed of the given OID as per + * the predefined ONLP fan speed modes: off, slow, normal, fast, max. + * + * Interpretation of these modes is up to the platform. + * + */ +int +onlp_fani_mode_set(onlp_oid_t id, onlp_fan_mode_t mode) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * This function sets the fan direction of the given OID. + * + * This function is only relevant if the fan OID supports both direction + * capabilities. + * + * This function is optional unless the functionality is available. + */ +int +onlp_fani_dir_set(onlp_oid_t id, onlp_fan_dir_t dir) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * Generic fan ioctl. Optional. + */ +int +onlp_fani_ioctl(onlp_oid_t id, va_list vargs) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/ledi.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/ledi.c new file mode 100755 index 00000000..0f2194c5 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/ledi.c @@ -0,0 +1,273 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include +#include +#include + +#include "platform_lib.h" + +#define prefix_path "/sys/class/leds/accton_as9716_32d_led::" +#define filename "brightness" + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_LED(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +/* LED related data + */ +enum onlp_led_id +{ + LED_RESERVED = 0, + LED_DIAG, + LED_LOC, + LED_FAN, + LED_PSU1, + LED_PSU2 +}; + +enum led_light_mode { + LED_MODE_OFF = 0, + LED_MODE_GREEN, + LED_MODE_AMBER, + LED_MODE_RED, + LED_MODE_BLUE, + LED_MODE_GREEN_BLINK, + LED_MODE_AMBER_BLINK, + LED_MODE_RED_BLINK, + LED_MODE_BLUE_BLINK, + LED_MODE_AUTO, + LED_MODE_UNKNOWN +}; + +typedef struct led_light_mode_map { + enum onlp_led_id id; + enum led_light_mode driver_led_mode; + enum onlp_led_mode_e onlp_led_mode; +} led_light_mode_map_t; + +led_light_mode_map_t led_map[] = { +{LED_DIAG, LED_MODE_OFF, ONLP_LED_MODE_OFF}, +{LED_DIAG, LED_MODE_GREEN, ONLP_LED_MODE_GREEN}, +{LED_DIAG, LED_MODE_AMBER, ONLP_LED_MODE_ORANGE}, +{LED_DIAG, LED_MODE_GREEN_BLINK, ONLP_LED_MODE_GREEN_BLINKING}, + +{LED_LOC, LED_MODE_OFF, ONLP_LED_MODE_OFF}, +{LED_LOC, LED_MODE_AMBER, ONLP_LED_MODE_ORANGE}, +{LED_LOC, LED_MODE_GREEN_BLINK, ONLP_LED_MODE_GREEN_BLINKING}, + + +{LED_FAN, LED_MODE_OFF, ONLP_LED_MODE_OFF}, +{LED_FAN, LED_MODE_AMBER, ONLP_LED_MODE_GREEN}, +{LED_FAN, LED_MODE_GREEN, ONLP_LED_MODE_ORANGE}, + +{LED_PSU1, LED_MODE_OFF, ONLP_LED_MODE_OFF}, +{LED_PSU1, LED_MODE_AMBER, ONLP_LED_MODE_GREEN}, +{LED_PSU1, LED_MODE_GREEN, ONLP_LED_MODE_ORANGE}, + +{LED_PSU2, LED_MODE_OFF, ONLP_LED_MODE_OFF}, +{LED_PSU2, LED_MODE_AMBER, ONLP_LED_MODE_GREEN}, +{LED_PSU2, LED_MODE_GREEN, ONLP_LED_MODE_ORANGE} +}; + +static char last_path[][10] = /* must map with onlp_led_id */ +{ + "reserved", + "diag", + "loc", + "fan", + "psu1", + "psu2" +}; + +/* + * Get the information for the given LED OID. + */ +static onlp_led_info_t linfo[] = +{ + { }, /* Not used */ + { + { ONLP_LED_ID_CREATE(LED_DIAG), "LED 1 (DIAG LED)", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF |ONLP_LED_CAPS_GREEN | ONLP_LED_CAPS_ORANGE | ONLP_LED_CAPS_GREEN_BLINKING, + }, + { + { ONLP_LED_ID_CREATE(LED_LOC), "LED 2 (LOC LED)", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF | ONLP_LED_CAPS_ORANGE | ONLP_LED_CAPS_GREEN_BLINKING, + }, + { + { ONLP_LED_ID_CREATE(LED_FAN), "LED 3 (FAN LED)", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF |ONLP_LED_CAPS_GREEN| ONLP_LED_CAPS_ORANGE , + }, + { + { ONLP_LED_ID_CREATE(LED_PSU1), "LED 4 (PSU1 LED)", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF |ONLP_LED_CAPS_GREEN| ONLP_LED_CAPS_ORANGE , + }, + { + { ONLP_LED_ID_CREATE(LED_PSU2), "LED 4 (PSU2 LED)", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF |ONLP_LED_CAPS_GREEN| ONLP_LED_CAPS_ORANGE , + }, +}; + +static int driver_to_onlp_led_mode(enum onlp_led_id id, enum led_light_mode driver_led_mode) +{ + int i, nsize = sizeof(led_map)/sizeof(led_map[0]); + + for (i = 0; i < nsize; i++) + { + if (id == led_map[i].id && driver_led_mode == led_map[i].driver_led_mode) + { + return led_map[i].onlp_led_mode; + } + } + + return 0; +} + +static int onlp_to_driver_led_mode(enum onlp_led_id id, onlp_led_mode_t onlp_led_mode) +{ + int i, nsize = sizeof(led_map)/sizeof(led_map[0]); + + for(i = 0; i < nsize; i++) + { + if (id == led_map[i].id && onlp_led_mode == led_map[i].onlp_led_mode) + { + return led_map[i].driver_led_mode; + } + } + + return 0; +} + +/* + * This function will be called prior to any other onlp_ledi_* functions. + */ +int +onlp_ledi_init(void) +{ + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_DIAG), ONLP_LED_MODE_OFF); + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_LOC), ONLP_LED_MODE_OFF); + + return ONLP_STATUS_OK; +} + +int +onlp_ledi_info_get(onlp_oid_t id, onlp_led_info_t* info) +{ + int local_id; + char data[2] = {0}; + char fullpath[50] = {0}; + + VALIDATE(id); + + local_id = ONLP_OID_ID_GET(id); + + /* get fullpath */ + sprintf(fullpath, "%s%s/%s", prefix_path, last_path[local_id], filename); + + /* Set the onlp_oid_hdr_t and capabilities */ + *info = linfo[ONLP_OID_ID_GET(id)]; + + /* Set LED mode */ + if (onlp_file_read_string(fullpath, data, sizeof(data), 0) != 0) { + DEBUG_PRINT("%s(%d)\r\n", __FUNCTION__, __LINE__); + return ONLP_STATUS_E_INTERNAL; + } + + info->mode = driver_to_onlp_led_mode(local_id, atoi(data)); + + /* Set the on/off status */ + if (info->mode != ONLP_LED_MODE_OFF) { + info->status |= ONLP_LED_STATUS_ON; + } + + return ONLP_STATUS_OK; +} + +/* + * Turn an LED on or off. + * + * This function will only be called if the LED OID supports the ONOFF + * capability. + * + * What 'on' means in terms of colors or modes for multimode LEDs is + * up to the platform to decide. This is intended as baseline toggle mechanism. + */ +int +onlp_ledi_set(onlp_oid_t id, int on_or_off) +{ + VALIDATE(id); + + if (!on_or_off) { + return onlp_ledi_mode_set(id, ONLP_LED_MODE_OFF); + } + + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * This function puts the LED into the given mode. It is a more functional + * interface for multimode LEDs. + * + * Only modes reported in the LED's capabilities will be attempted. + */ +int +onlp_ledi_mode_set(onlp_oid_t id, onlp_led_mode_t mode) +{ + int local_id; + char fullpath[50] = {0}; + + VALIDATE(id); + + local_id = ONLP_OID_ID_GET(id); + sprintf(fullpath, "%s%s/%s", prefix_path, last_path[local_id], filename); + + if (onlp_file_write_integer(fullpath, onlp_to_driver_led_mode(local_id, mode)) != 0) + { + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + +/* + * Generic LED ioctl interface. + */ +int +onlp_ledi_ioctl(onlp_oid_t id, va_list vargs) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/make.mk b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/make.mk new file mode 100755 index 00000000..6ab6bdff --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/make.mk @@ -0,0 +1,9 @@ +############################################################################### +# +# +# +############################################################################### + +LIBRARY := x86_64_accton_as9716_32d +$(LIBRARY)_SUBDIR := $(dir $(lastword $(MAKEFILE_LIST))) +include $(BUILDER)/lib.mk diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.c new file mode 100755 index 00000000..fd562d1e --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.c @@ -0,0 +1,219 @@ +#include +#include +#include +#include +#include "platform_lib.h" +#include +#include "x86_64_accton_as9716_32d_log.h" + + +static int _onlp_file_write(char *filename, char *buffer, int buf_size, int data_len) +{ + int fd; + int len; + + if ((buffer == NULL) || (buf_size < 0)) { + return -1; + } + + if ((fd = open(filename, O_WRONLY, S_IWUSR)) == -1) { + return -1; + } + + if ((len = write(fd, buffer, buf_size)) < 0) { + close(fd); + return -1; + } + + if ((close(fd) == -1)) { + return -1; + } + + if ((len > buf_size) || (data_len != 0 && len != data_len)) { + return -1; + } + + return 0; +} + +int onlp_file_write_integer(char *filename, int value) +{ + char buf[8] = {0}; + sprintf(buf, "%d", value); + + return _onlp_file_write(filename, buf, (int)strlen(buf), 0); +} + +int onlp_file_read_binary(char *filename, char *buffer, int buf_size, int data_len) +{ + int fd; + int len; + + if ((buffer == NULL) || (buf_size < 0)) { + return -1; + } + + if ((fd = open(filename, O_RDONLY)) == -1) { + return -1; + } + + if ((len = read(fd, buffer, buf_size)) < 0) { + close(fd); + return -1; + } + + if ((close(fd) == -1)) { + return -1; + } + + if ((len > buf_size) || (data_len != 0 && len != data_len)) { + return -1; + } + + return 0; +} + +int onlp_file_read_string(char *filename, char *buffer, int buf_size, int data_len) +{ + int ret; + + if (data_len >= buf_size) { + return -1; + } + + ret = onlp_file_read_binary(filename, buffer, buf_size-1, data_len); + + if (ret == 0) { + buffer[buf_size-1] = '\0'; + } + + return ret; +} + +#define I2C_PSU_MODEL_NAME_LEN 9 +#define I2C_PSU_FAN_DIR_LEN 3 + +psu_type_t get_psu_type(int id, char* modelname, int modelname_len) +{ + char *node = NULL; + char model_name[I2C_PSU_MODEL_NAME_LEN + 1] = {0}; + + /* Check model name */ + node = (id == PSU1_ID) ? PSU1_AC_PMBUS_NODE(psu_mfr_model) : PSU2_AC_PMBUS_NODE(psu_mfr_model); + memset(model_name, 0x0, I2C_PSU_MODEL_NAME_LEN + 1); + memset(modelname, 0x0, modelname_len); + if (onlp_file_read_string(node, model_name, sizeof(model_name), 0) != 0) { + + return PSU_TYPE_UNKNOWN; + } + + if (!strncmp(model_name, "FSH082", strlen("FSH082"))) + { + if (modelname) + strncpy(modelname, model_name, strlen("FSH082")<(modelname_len-1)?strlen("FSH082"):(modelname_len-1)); + + return PSU_TYPE_ACBEL; + } + if (!strncmp(model_name, "YM-2651Y", strlen("YM-2651Y"))) + { + if (modelname) + strncpy(modelname, model_name, modelname_len-1); + return PSU_TYPE_YM2651Y; + } + + return PSU_TYPE_UNKNOWN; +} +int +psu_pmbus_info_get(int id, char *node, int *value) +{ + int ret = 0; + char path[PSU_NODE_MAX_PATH_LEN] = {0}; + + *value = 0; + + if (PSU1_ID == id) { + sprintf(path, "%s%s", PSU1_AC_PMBUS_PREFIX, node); + } + else { + sprintf(path, "%s%s", PSU2_AC_PMBUS_PREFIX, node); + } + + if (onlp_file_read_int(value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file(%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ret; +} + + + +int psu_ym2651y_pmbus_info_get(int id, char *node, int *value) +{ + int ret = 0; + char path[PSU_NODE_MAX_PATH_LEN] = {0}; + + *value = 0; + + if (PSU1_ID == id) { + sprintf(path, "%s%s", PSU1_AC_PMBUS_PREFIX, node); + } + else { + sprintf(path, "%s%s", PSU2_AC_PMBUS_PREFIX, node); + } + + if (onlp_file_read_int(value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file(%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ret; +} + +int psu_ym2651y_pmbus_info_set(int id, char *node, int value) +{ + char path[PSU_NODE_MAX_PATH_LEN] = {0}; + + switch (id) { + case PSU1_ID: + sprintf(path, "%s%s", PSU1_AC_PMBUS_PREFIX, node); + break; + case PSU2_ID: + sprintf(path, "%s%s", PSU2_AC_PMBUS_PREFIX, node); + break; + default: + return ONLP_STATUS_E_UNSUPPORTED; + }; + + if (onlp_file_write_integer(path, value) < 0) { + AIM_LOG_ERROR("Unable to write data to file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + +#define PSU_SERIAL_NUMBER_LEN 19 + +int psu_serial_number_get(int id, char *serial, int serial_len) +{ + int size = 0; + int ret = ONLP_STATUS_OK; + char *prefix = NULL; + + if (serial == NULL || serial_len < PSU_SERIAL_NUMBER_LEN) { + return ONLP_STATUS_E_PARAM; + } + + prefix = (id == PSU1_ID) ? PSU1_AC_HWMON_PREFIX : PSU2_AC_HWMON_PREFIX; + + ret = onlp_file_read((uint8_t*)serial, PSU_SERIAL_NUMBER_LEN, &size, "%s%s", prefix, "psu_serial_number"); + if (ret != ONLP_STATUS_OK || size != PSU_SERIAL_NUMBER_LEN) { + return ONLP_STATUS_E_INTERNAL; + + } + serial[PSU_SERIAL_NUMBER_LEN-1] = '\0'; + + return ONLP_STATUS_OK; +} + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.h new file mode 100755 index 00000000..57edf621 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/platform_lib.h @@ -0,0 +1,91 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#ifndef __PLATFORM_LIB_H__ +#define __PLATFORM_LIB_H__ + +#include +#include "x86_64_accton_as9716_32d_log.h" + +#define CHASSIS_FAN_COUNT 6 +#define CHASSIS_THERMAL_COUNT 8 +#define CHASSIS_PSU_COUNT 2 +#define CHASSIS_LED_COUNT 5 + +#define PSU1_ID 1 +#define PSU2_ID 2 + +#define PSU_NODE_MAX_INT_LEN 8 +#define PSU_NODE_MAX_PATH_LEN 64 + +#define PSU1_AC_PMBUS_PREFIX "/sys/bus/i2c/devices/10-0059/" +#define PSU2_AC_PMBUS_PREFIX "/sys/bus/i2c/devices/9-0058/" + + +#define PSU1_AC_PMBUS_NODE(node) PSU1_AC_PMBUS_PREFIX#node +#define PSU2_AC_PMBUS_NODE(node) PSU2_AC_PMBUS_PREFIX#node + +#define PSU1_AC_HWMON_PREFIX "/sys/bus/i2c/devices/10-0051/" +#define PSU2_AC_HWMON_PREFIX "/sys/bus/i2c/devices/9-0050/" + + + +#define PSU1_AC_HWMON_NODE(node) PSU1_AC_HWMON_PREFIX#node +#define PSU2_AC_HWMON_NODE(node) PSU2_AC_HWMON_PREFIX#node + +#define FAN_BOARD_PATH "/sys/bus/i2c/devices/17-0066/" +#define FAN_NODE(node) FAN_BOARD_PATH#node + +#define IDPROM_PATH "/sys/class/i2c-adapter/i2c-0/0-0056/eeprom" + +int onlp_file_write_integer(char *filename, int value); +int onlp_file_read_binary(char *filename, char *buffer, int buf_size, int data_len); +int onlp_file_read_string(char *filename, char *buffer, int buf_size, int data_len); + +int psu_pmbus_info_get(int id, char *node, int *value); +int psu_ym2651y_pmbus_info_get(int id, char *node, int *value); +int psu_ym2651y_pmbus_info_set(int id, char *node, int value); + +typedef enum psu_type { + PSU_TYPE_UNKNOWN, + PSU_TYPE_ACBEL, + PSU_TYPE_YM2651Y, + PSU_TYPE_AC_F2B, + PSU_TYPE_AC_B2F +} psu_type_t; + +psu_type_t get_psu_type(int id, char* modelname, int modelname_len); +int psu_serial_number_get(int id, char *serial, int serial_len); + +//#define DEBUG_MODE 1 + +#if (DEBUG_MODE == 1) + #define DEBUG_PRINT(format, ...) printf(format, __VA_ARGS__) +#else + #define DEBUG_PRINT(format, ...) +#endif + +#endif /* __PLATFORM_LIB_H__ */ + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/psui.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/psui.c new file mode 100755 index 00000000..30b94fc8 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/psui.c @@ -0,0 +1,245 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +//#include +#include +#include "platform_lib.h" + +#define PSU_STATUS_PRESENT 1 +#define PSU_STATUS_POWER_GOOD 1 + + + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_PSU(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +static int +psu_status_info_get(int id, char *node, int *value) +{ + int ret = 0; + char path[PSU_NODE_MAX_PATH_LEN] = {0}; + + *value = 0; + + + if (PSU1_ID == id) { + sprintf(path, "%s%s", PSU1_AC_HWMON_PREFIX, node); + } + else if (PSU2_ID == id) { + sprintf(path, "%s%s", PSU2_AC_HWMON_PREFIX, node); + } + if (onlp_file_read_int(value, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file(%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ret; +} + +int +onlp_psui_init(void) +{ + return ONLP_STATUS_OK; +} + +static int +psu_ym2651y_info_get(onlp_psu_info_t* info) +{ + int val = 0; + int index = ONLP_OID_ID_GET(info->hdr.id); + + /* Set capability + */ + info->caps = ONLP_PSU_CAPS_AC; + + if (info->status & ONLP_PSU_STATUS_FAILED) { + return ONLP_STATUS_OK; + } + + /* Set the associated oid_table */ + info->hdr.coids[0] = ONLP_FAN_ID_CREATE(index + CHASSIS_FAN_COUNT); + info->hdr.coids[1] = ONLP_THERMAL_ID_CREATE(index + CHASSIS_THERMAL_COUNT); + + /* Read voltage, current and power */ + if (psu_ym2651y_pmbus_info_get(index, "psu_v_out", &val) == 0) { + info->mvout = val; + info->caps |= ONLP_PSU_CAPS_VOUT; + } + + if (psu_ym2651y_pmbus_info_get(index, "psu_i_out", &val) == 0) { + info->miout = val; + info->caps |= ONLP_PSU_CAPS_IOUT; + } + + if (psu_ym2651y_pmbus_info_get(index, "psu_p_out", &val) == 0) { + info->mpout = val; + info->caps |= ONLP_PSU_CAPS_POUT; + } + + psu_serial_number_get(index, info->serial, sizeof(info->serial)); + + return ONLP_STATUS_OK; +} + + + +static int +psu_data_info_get(onlp_psu_info_t* info) +{ + int val = 0; + int index = ONLP_OID_ID_GET(info->hdr.id); + + /* Set capability + */ + info->caps = ONLP_PSU_CAPS_AC; + + if (info->status & ONLP_PSU_STATUS_FAILED) { + return ONLP_STATUS_OK; + } + + /* Set the associated oid_table */ + info->hdr.coids[0] = ONLP_FAN_ID_CREATE(index + CHASSIS_FAN_COUNT); + info->hdr.coids[1] = ONLP_THERMAL_ID_CREATE(index + CHASSIS_THERMAL_COUNT); + + /* Read voltage, current and power */ + if (psu_pmbus_info_get(index, "psu_v_out", &val) == 0) { + info->mvout = val; + info->caps |= ONLP_PSU_CAPS_VOUT; + } + + if (psu_pmbus_info_get(index, "psu_v_in", &val) == 0) { + info->mvin = val; + info->caps |= ONLP_PSU_CAPS_VIN; + } + + if (psu_pmbus_info_get(index, "psu_i_out", &val) == 0) { + info->miout = val; + info->caps |= ONLP_PSU_CAPS_IOUT; + } + + if (psu_pmbus_info_get(index, "psu_i_in", &val) == 0) { + info->miin = val; + info->caps |= ONLP_PSU_CAPS_IIN; + } + + if (psu_pmbus_info_get(index, "psu_p_out", &val) == 0) { + info->mpout = val; + info->caps |= ONLP_PSU_CAPS_POUT; + } + + if (psu_pmbus_info_get(index, "psu_p_in", &val) == 0) { + info->mpin = val; + info->caps |= ONLP_PSU_CAPS_PIN; + } + psu_serial_number_get(index, info->serial, sizeof(info->serial)); + + return ONLP_STATUS_OK; +} + + +/* + * Get all information about the given PSU oid. + */ +static onlp_psu_info_t pinfo[] = +{ + { }, /* Not used */ + { + { ONLP_PSU_ID_CREATE(PSU1_ID), "PSU-1", 0 }, + }, + { + { ONLP_PSU_ID_CREATE(PSU2_ID), "PSU-2", 0 }, + } +}; + +int +onlp_psui_info_get(onlp_oid_t id, onlp_psu_info_t* info) +{ + int val = 0; + int ret = ONLP_STATUS_OK; + int index = ONLP_OID_ID_GET(id); + psu_type_t psu_type; + + VALIDATE(id); + + memset(info, 0, sizeof(onlp_psu_info_t)); + *info = pinfo[index]; /* Set the onlp_oid_hdr_t */ + /* Get the present state */ + if (psu_status_info_get(index, "psu_present", &val) != 0) { + AIM_LOG_ERROR("Unable to read PSU(%d) node(psu_present)\r\n", index); + } + + if (val != PSU_STATUS_PRESENT) { + info->status &= ~ONLP_PSU_STATUS_PRESENT; + return ONLP_STATUS_OK; + } + info->status |= ONLP_PSU_STATUS_PRESENT; + + + /* Get power good status */ + if (psu_status_info_get(index, "psu_power_good", &val) != 0) { + AIM_LOG_ERROR("Unable to read PSU(%d) node(psu_power_good)\r\n", index); + } + + if (val != PSU_STATUS_POWER_GOOD) { + info->status |= ONLP_PSU_STATUS_FAILED; + } + + /* Get PSU type + */ + psu_type = get_psu_type(index, info->model, sizeof(info->model)); + + + switch (psu_type) { + case PSU_TYPE_ACBEL: + ret = psu_data_info_get(info); + break; + case PSU_TYPE_YM2651Y: + ret = psu_ym2651y_info_get(info); + break; + case PSU_TYPE_UNKNOWN: /* User insert a unknown PSU or unplugged.*/ + info->status |= ONLP_PSU_STATUS_UNPLUGGED; + info->status &= ~ONLP_PSU_STATUS_FAILED; + ret = ONLP_STATUS_OK; + break; + default: + ret = ONLP_STATUS_E_UNSUPPORTED; + break; + } + + return ret; +} + +int +onlp_psui_ioctl(onlp_oid_t pid, va_list vargs) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sfpi.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sfpi.c new file mode 100755 index 00000000..5e03edb0 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sfpi.c @@ -0,0 +1,331 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2013 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include "x86_64_accton_as9716_32d_int.h" +#include "x86_64_accton_as9716_32d_log.h" + +#define PORT_EEPROM_FORMAT "/sys/bus/i2c/devices/%d-0050/eeprom" +#define MODULE_PRESENT_FORMAT "/sys/bus/i2c/devices/%d-00%d/module_present_%d" +#define MODULE_RXLOS_FORMAT "/sys/bus/i2c/devices/%d-00%d/module_rx_los_%d" +#define MODULE_TXFAULT_FORMAT "/sys/bus/i2c/devices/%d-00%d/module_tx_fault_%d" +#define MODULE_TXDISABLE_FORMAT "/sys/bus/i2c/devices/%d-00%d/module_tx_disable_%d" + +int sfp_map_bus[] ={25, 26, 27, 28, 29, 30, 31, 32, + 33, 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, 47, 48, + 49, 50, 51, 52, 53, 54, 55, 56, + 57, 58}; + +/************************************************************ + * + * SFPI Entry Points + * + ***********************************************************/ + +int +onlp_sfpi_init(void) +{ + /* Called at initialization time */ + return ONLP_STATUS_OK; +} +int +onlp_sfpi_map_bus_index(int port) +{ + if(port < 0 || port >=34) + return ONLP_STATUS_E_INTERNAL; + return sfp_map_bus[port]; +} + +int +onlp_sfpi_bitmap_get(onlp_sfp_bitmap_t* bmap) +{ + /* + * Ports {0, 34} + */ + int p; + + for(p = 0; p < 34; p++) { + AIM_BITMAP_SET(bmap, p); + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_is_present(int port) +{ + /* + * Return 1 if present. + * Return 0 if not present. + * Return < 0 if error. + */ + int present; + int bus, addr; + + if(port <0 || port > 34) + return ONLP_STATUS_E_INTERNAL; + + if(port >=0 && port < 16) + { + addr = 61; + bus = 20; + } + else + { + addr = 62; + bus = 21; + } + + if (onlp_file_read_int(&present, MODULE_PRESENT_FORMAT, bus, addr, (port+1)) < 0) { + AIM_LOG_ERROR("Unable to read present status from port(%d)\r\n", port); + return ONLP_STATUS_E_INTERNAL; + } + + return present; +} + +int +onlp_sfpi_presence_bitmap_get(onlp_sfp_bitmap_t* dst) +{ + + return ONLP_STATUS_E_UNSUPPORTED; +} + +int +onlp_sfpi_rx_los_bitmap_get(onlp_sfp_bitmap_t* dst) +{ + uint32_t bytes[5]; + int i = 0; + uint64_t rx_los_all = 0; + + bytes[0]=bytes[1]=bytes[2]=bytes[3]=0x0; + bytes[4]=0x03; + for(i = AIM_ARRAYSIZE(bytes)-1; i >= 0; i--) { + rx_los_all <<= 8; + rx_los_all |= bytes[i]; + } + + /* Populate bitmap */ + for(i = 0; rx_los_all; i++) { + AIM_BITMAP_MOD(dst, i, (rx_los_all & 1)); + rx_los_all >>= 1; + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_eeprom_read(int port, uint8_t data[256]) +{ + /* + * Read the SFP eeprom into data[] + * + * Return MISSING if SFP is missing. + * Return OK if eeprom is read + */ + int size = 0; + if(port <0 || port > 34) + return ONLP_STATUS_E_INTERNAL; + memset(data, 0, 256); + + if(onlp_file_read(data, 256, &size, PORT_EEPROM_FORMAT, onlp_sfpi_map_bus_index(port)) != ONLP_STATUS_OK) { + AIM_LOG_ERROR("Unable to read eeprom from port(%d)\r\n", port); + return ONLP_STATUS_E_INTERNAL; + } + + if (size != 256) { + AIM_LOG_ERROR("Unable to read eeprom from port(%d), size is different!\r\n", port); + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_dom_read(int port, uint8_t data[256]) +{ + FILE* fp; + char file[64] = {0}; + + sprintf(file, PORT_EEPROM_FORMAT, onlp_sfpi_map_bus_index(port)); + fp = fopen(file, "r"); + if(fp == NULL) { + AIM_LOG_ERROR("Unable to open the eeprom device file of port(%d)", port); + return ONLP_STATUS_E_INTERNAL; + } + + if (fseek(fp, 256, SEEK_CUR) != 0) { + fclose(fp); + AIM_LOG_ERROR("Unable to set the file position indicator of port(%d)", port); + return ONLP_STATUS_E_INTERNAL; + } + + int ret = fread(data, 1, 256, fp); + fclose(fp); + if (ret != 256) { + AIM_LOG_ERROR("Unable to read the module_eeprom device file of port(%d)", port); + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_dev_readb(int port, uint8_t devaddr, uint8_t addr) +{ + int bus = onlp_sfpi_map_bus_index(port); + return onlp_i2c_readb(bus, devaddr, addr, ONLP_I2C_F_FORCE); +} + +int +onlp_sfpi_dev_writeb(int port, uint8_t devaddr, uint8_t addr, uint8_t value) +{ + int bus = onlp_sfpi_map_bus_index(port); + return onlp_i2c_writeb(bus, devaddr, addr, value, ONLP_I2C_F_FORCE); +} + +int +onlp_sfpi_dev_readw(int port, uint8_t devaddr, uint8_t addr) +{ + int bus = onlp_sfpi_map_bus_index(port); + return onlp_i2c_readw(bus, devaddr, addr, ONLP_I2C_F_FORCE); +} + +int +onlp_sfpi_dev_writew(int port, uint8_t devaddr, uint8_t addr, uint16_t value) +{ + int bus = onlp_sfpi_map_bus_index(port); + return onlp_i2c_writew(bus, devaddr, addr, value, ONLP_I2C_F_FORCE); +} + +int +onlp_sfpi_control_set(int port, onlp_sfp_control_t control, int value) +{ + int rv; + int addr = 62; + int bus = 21; + + switch(control) + { + case ONLP_SFP_CONTROL_TX_DISABLE: + { + if(port==32 || port==33) { + if (onlp_file_write_int(0, MODULE_TXDISABLE_FORMAT, bus, addr, (port+1)) < 0) { + AIM_LOG_ERROR("Unable to set tx_disable status to port(%d)\r\n", port); + rv = ONLP_STATUS_E_INTERNAL; + } + else { + rv = ONLP_STATUS_OK; + } + } + else { + rv = ONLP_STATUS_E_UNSUPPORTED; + } + break; + } + + default: + rv = ONLP_STATUS_E_UNSUPPORTED; + break; + } + + return rv; +} + +int +onlp_sfpi_control_get(int port, onlp_sfp_control_t control, int* value) +{ + int rv; + int addr = 62; + int bus = 21; + + switch(control) + { + case ONLP_SFP_CONTROL_RX_LOS: + { + if(port==32 || port==33) { + if (onlp_file_read_int(value, MODULE_RXLOS_FORMAT, bus, addr, (port+1)) < 0) { + AIM_LOG_ERROR("Unable to read rx_loss status from port(%d)\r\n", port); + rv = ONLP_STATUS_E_INTERNAL; + } + else { + rv = ONLP_STATUS_OK; + } + } + else { + rv = ONLP_STATUS_E_UNSUPPORTED; + } + break; + } + + case ONLP_SFP_CONTROL_TX_FAULT: + { + if(port==32 || port==33) { + if (onlp_file_read_int(value, MODULE_TXFAULT_FORMAT, bus, addr, (port+1)) < 0) { + AIM_LOG_ERROR("Unable to read tx_fault status from port(%d)\r\n", port); + rv = ONLP_STATUS_E_INTERNAL; + } + else { + rv = ONLP_STATUS_OK; + } + } + else { + rv = ONLP_STATUS_E_UNSUPPORTED; + } + break; + } + + case ONLP_SFP_CONTROL_TX_DISABLE: + { + if(port==32 || port==33) { + if (onlp_file_read_int(value, MODULE_TXDISABLE_FORMAT, bus, addr, (port+1)) < 0) { + AIM_LOG_ERROR("Unable to read tx_disabled status from port(%d)\r\n", port); + rv = ONLP_STATUS_E_INTERNAL; + } + else { + rv = ONLP_STATUS_OK; + } + } + else { + rv = ONLP_STATUS_E_UNSUPPORTED; + } + break; + } + + default: + rv = ONLP_STATUS_E_UNSUPPORTED; + } + + return rv; +} + +int +onlp_sfpi_denit(void) +{ + return ONLP_STATUS_OK; +} diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sysi.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sysi.c new file mode 100755 index 00000000..4dfaa129 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/sysi.c @@ -0,0 +1,490 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include + +#include +#include +#include +#include +#include +#include "platform_lib.h" +#include "x86_64_accton_as9716_32d_int.h" +#include "x86_64_accton_as9716_32d_log.h" + + +#define PREFIX_PATH_ON_CPLD_DEV "/sys/bus/i2c/devices/" +#define NUM_OF_CPLD 3 +#define FAN_DUTY_CYCLE_MAX (100) +#define FAN_DUTY_CYCLE_DEFAULT (32) +#define FAN_DUTY_PLUS_FOR_DIR (13) +/* Note, all chassis fans share 1 single duty setting. + * Here use fan 1 to represent global fan duty value.*/ +#define FAN_ID_FOR_SET_FAN_DUTY (1) +#define CELSIUS_RECORD_NUMBER (2) /*Must >= 2*/ + +typedef struct fan_ctrl_policy { + int duty_cycle; /* In percetage */ + int step_up_thermal; /* In mini-Celsius */ + int step_dn_thermal; /* In mini-Celsius */ +} fan_ctrl_policy_t; + +static char arr_cplddev_name[NUM_OF_CPLD][10] = +{ + "4-0060", + "5-0062", + "6-0064" +}; + +const char* +onlp_sysi_platform_get(void) +{ + return "x86-64-accton-as9716-32d-r0"; +} + +int +onlp_sysi_onie_data_get(uint8_t** data, int* size) +{ + uint8_t* rdata = aim_zmalloc(256); + + if(onlp_file_read(rdata, 256, size, IDPROM_PATH) == ONLP_STATUS_OK) { + if(*size == 256) { + *data = rdata; + return ONLP_STATUS_OK; + } + } + + aim_free(rdata); + *size = 0; + return ONLP_STATUS_E_INTERNAL; +} + +int +onlp_sysi_oids_get(onlp_oid_t* table, int max) +{ + int i; + onlp_oid_t* e = table; + memset(table, 0, max*sizeof(onlp_oid_t)); + + /* 6 Thermal sensors on the chassis */ + for (i = 1; i <= CHASSIS_THERMAL_COUNT; i++) { + *e++ = ONLP_THERMAL_ID_CREATE(i); + } + + /* 5 LEDs on the chassis */ + for (i = 1; i <= CHASSIS_LED_COUNT; i++) { + *e++ = ONLP_LED_ID_CREATE(i); + } + + /* 2 PSUs on the chassis */ + for (i = 1; i <= CHASSIS_PSU_COUNT; i++) { + *e++ = ONLP_PSU_ID_CREATE(i); + } + + /* 6 Fans on the chassis */ + for (i = 1; i <= CHASSIS_FAN_COUNT; i++) { + *e++ = ONLP_FAN_ID_CREATE(i); + } + + return 0; +} + +int +onlp_sysi_platform_info_get(onlp_platform_info_t* pi) +{ + int i, v[NUM_OF_CPLD]={0}; + + for (i = 0; i < NUM_OF_CPLD; i++) { + v[i] = 0; + + if(onlp_file_read_int(v+i, "%s%s/version", PREFIX_PATH_ON_CPLD_DEV, arr_cplddev_name[i]) < 0) { + return ONLP_STATUS_E_INTERNAL; + } + } + pi->cpld_versions = aim_fstrdup("%d.%d.%d", v[0], v[1], v[2]); + + return 0; +} + +void +onlp_sysi_platform_info_free(onlp_platform_info_t* pi) +{ + aim_free(pi->cpld_versions); +} + +/* Thermal plan: + * $TMP = (CPU_core + LM75_1+ LM75_2 + LM75_3 + LM75_4)/5 + * 1. If any FAN failed, set all the other fans as full speed, 100%. + * 2. If any sensor is high than 45 degrees, set fan speed to duty 62.5%. + * 3. If any sensor is high than 50 degrees, set fan speed to duty 100%. + * 4. When $TMP >= 40 C, set fan speed to duty 62.5%. + * 5. When $TMP >= 45 C, set fan speed to duty 100%. + * 6. When $TMP < 35 C, set fan speed to duty 31.25%. + * 7. Direction factor, when B2F, duty + 12.5%. + * + * Note, all chassis fans share 1 single duty setting. + */ +fan_ctrl_policy_t fan_ctrl_policy_avg[] = { +{FAN_DUTY_CYCLE_MAX , 45000, INT_MIN}, +{63 , 40000, INT_MIN}, +{32 , INT_MAX, 35000}, +}; + +fan_ctrl_policy_t fan_ctrl_policy_single[] = { +{FAN_DUTY_CYCLE_MAX , 50000, INT_MIN}, +{63 , 45000, INT_MIN}, +}; + +struct fan_control_data_s { + int duty_cycle; + int dir_plus; + int mc_avg_pre[CELSIUS_RECORD_NUMBER]; + int mc_high_pre[CELSIUS_RECORD_NUMBER]; + +} fan_control_data_pre = +{ + .duty_cycle = FAN_DUTY_CYCLE_DEFAULT, + .dir_plus = 0, + .mc_avg_pre = {INT_MIN+1, INT_MIN}, /*init as thermal rising to avoid full speed.*/ + .mc_high_pre = {INT_MIN+1, INT_MIN}, /*init as thermal rising to avoid full speed.*/ + +}; + +static int +sysi_check_fan(uint32_t *fan_dir){ + int i, present; + + for (i = 1; i <= CHASSIS_FAN_COUNT; i++) + { + onlp_fan_info_t fan_info; + + if (onlp_fani_info_get(ONLP_FAN_ID_CREATE(i), &fan_info) != ONLP_STATUS_OK) { + AIM_LOG_ERROR("Unable to get fan(%d) status\r\n", i); + return ONLP_STATUS_E_INTERNAL; + } + + present = fan_info.status & ONLP_FAN_STATUS_PRESENT; + if ((fan_info.status & ONLP_FAN_STATUS_FAILED) || !present) { + AIM_LOG_WARN("Fan(%d) is not working, set the other fans as full speed\r\n", i); + int ret = onlp_fani_percentage_set( + ONLP_FAN_ID_CREATE(FAN_ID_FOR_SET_FAN_DUTY), FAN_DUTY_CYCLE_MAX); + if (ret != ONLP_STATUS_OK) + return ret; + else + return ONLP_STATUS_E_MISSING; + } + + /* Get fan direction (Only get the first one since all fan direction are the same) + */ + if (i == 1) { + *fan_dir = fan_info.status & (ONLP_FAN_STATUS_F2B|ONLP_FAN_STATUS_B2F); + } + } + + return ONLP_STATUS_OK; +} + +static int +sysi_get_fan_duty(int *cur_duty_cycle){ + int fd, len; + char buf[10] = {0}; + char *node = FAN_NODE(fan_duty_cycle_percentage); + + /* Get current fan duty*/ + fd = open(node, O_RDONLY); + if (fd == -1){ + AIM_LOG_ERROR("Unable to open fan speed control node (%s)", node); + return ONLP_STATUS_E_INTERNAL; + } + + len = read(fd, buf, sizeof(buf)); + close(fd); + if (len <= 0) { + AIM_LOG_ERROR("Unable to read fan speed from (%s)", node); + return ONLP_STATUS_E_INTERNAL; + } + *cur_duty_cycle = atoi(buf); + + return ONLP_STATUS_OK; +} + +static int +sysi_get_thermal_sum(int *mcelsius){ + onlp_thermal_info_t thermal_info; + int i; + + *mcelsius = 0; + for (i = 1; i <= CHASSIS_THERMAL_COUNT; i++) { + if (onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(i), &thermal_info) + != ONLP_STATUS_OK) { + AIM_LOG_ERROR("Unable to read thermal status"); + return ONLP_STATUS_E_INTERNAL; + } + *mcelsius += thermal_info.mcelsius; + + DEBUG_PRINT("Thermal %d: %d \n ", i, thermal_info.mcelsius); + + } + + return ONLP_STATUS_OK; + +} + +static int +sysi_get_highest_thermal(int *mcelsius){ + onlp_thermal_info_t thermal_info; + int i, highest; + + highest = 0; + for (i = 1; i <= CHASSIS_THERMAL_COUNT; i++) { + if (onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(i), &thermal_info) + != ONLP_STATUS_OK) { + AIM_LOG_ERROR("Unable to read thermal status"); + return ONLP_STATUS_E_INTERNAL; + } + highest = (thermal_info.mcelsius > highest)? + thermal_info.mcelsius : highest; + } + *mcelsius = highest; + return ONLP_STATUS_OK; +} + +/* Anaylze thermal changing history to judge if the change is a stable trend. */ +static int _is_thermal_a_trend(int *mc_history){ + int i, trend, trended; + + if (mc_history == NULL) { + AIM_LOG_ERROR("Unable to get history of thermal\n"); + return 0; + } + + /* Get heat up/down trend. */ + trend = 0; + for (i = 0; i < CELSIUS_RECORD_NUMBER; i++) { + if (( mc_history[i+1] < mc_history[i])){ + trend++; + }else if (( mc_history[i+1] > mc_history[i])){ + trend--; + } + } + + trended = (abs(trend) >= ((CELSIUS_RECORD_NUMBER+1)/2))? 1:0; +#if (DEBUG_MODE == 1) + DEBUG_PRINT("[INFO]%s#%d, trended: %d, UP/DW: %d mcelsius:", + __func__, __LINE__, trended, trend ); + for (i = 0; i <= CELSIUS_RECORD_NUMBER; i++) { + DEBUG_PRINT(" %d =>", mc_history[i]); + } + DEBUG_PRINT("%c\n", ' '); +#endif + + /*For more than half changes are same direction, it's a firm trend.*/ + return trended; +} + + +/* Decide duty by highest value of thermal sensors.*/ +static int +sysi_get_duty_by_highest(int *duty_cycle){ + int i, ret, maxtrix_len; + int new_duty_cycle = 0 ; + int mc_history[CELSIUS_RECORD_NUMBER+1] = {0}; + int *mcelsius_pre_p = &mc_history[1]; + int *mcelsius_now_p = &mc_history[0]; + + /* Fill up mcelsius array, + * [0] is current temperature, others are history. + */ + ret = sysi_get_highest_thermal(mcelsius_now_p); + if(ONLP_STATUS_OK != ret){ + return ret; + } + memcpy (mcelsius_pre_p, fan_control_data_pre.mc_high_pre, + sizeof(fan_control_data_pre.mc_high_pre)); + + DEBUG_PRINT("[INFO]%s#%d, highest mcelsius:%d!\n", + __func__, __LINE__, *mcelsius_now_p); + + /* Shift records to the right */ + for (i = 0; i < CELSIUS_RECORD_NUMBER; i++) { + fan_control_data_pre.mc_high_pre[i] = mc_history[i]; + } + + /* Only change duty on consecutive heat rising or falling.*/ + maxtrix_len = AIM_ARRAYSIZE(fan_ctrl_policy_single); + + /* Only change duty when the thermal changing are firm. */ + if (_is_thermal_a_trend(mc_history)) + { + int matched = 0; + for (i = 0; i < maxtrix_len; i++) { + if ((*mcelsius_now_p > fan_ctrl_policy_single[i].step_up_thermal)) { + new_duty_cycle = fan_ctrl_policy_single[i].duty_cycle; + matched = !matched; + break; + } + } +/* if (!matched) { + DEBUG_PRINT("%s#%d, celsius(%d) falls into undefined range!!\n", + __func__, __LINE__, *mcelsius_now_p); + } */ + } + *duty_cycle = new_duty_cycle; + return ONLP_STATUS_OK; +} + +/* Decide duty by average value of thermal sensors.*/ +static int +sysi_get_duty_by_average(int *duty_cycle){ + int i, mcelsius_avg, ret, maxtrix_len; + int new_duty_cycle=0; + int mc_history[CELSIUS_RECORD_NUMBER+1] = {0}; + int *mcelsius_pre_p = &mc_history[1]; + int *mcelsius_now_p = &mc_history[0]; + + /* Fill up mcelsius array, + * [0] is current temperature, others are history. + */ + *mcelsius_now_p = 0; + ret = sysi_get_thermal_sum(mcelsius_now_p); + if(ONLP_STATUS_OK != ret){ + return ret; + } + mcelsius_avg = (*mcelsius_now_p)/CHASSIS_THERMAL_COUNT; + + memcpy (mcelsius_pre_p, fan_control_data_pre.mc_avg_pre, + sizeof(fan_control_data_pre.mc_avg_pre)); + + DEBUG_PRINT("[INFO]%s#%d, mcelsius:%d!\n", __func__, __LINE__, mcelsius_avg); + + /* Shift records to the right */ + for (i = 0; i < CELSIUS_RECORD_NUMBER; i++) { + fan_control_data_pre.mc_avg_pre[i] = mc_history[i]; + } + + /* Only change duty on consecutive heat rising or falling.*/ + maxtrix_len = AIM_ARRAYSIZE(fan_ctrl_policy_avg); + + /* Only change duty when the thermal changing are firm. */ + if (_is_thermal_a_trend(mc_history)) + { + int matched = 0; + for (i = 0; i < maxtrix_len; i++) { + if ((mcelsius_avg >= fan_ctrl_policy_avg[i].step_up_thermal)) { + new_duty_cycle = fan_ctrl_policy_avg[i].duty_cycle; + matched = !matched; + break; + } + } + for (i = maxtrix_len-1; i>=0; i--) { + if ((mcelsius_avg < fan_ctrl_policy_avg[i].step_dn_thermal)) { + new_duty_cycle = fan_ctrl_policy_avg[i].duty_cycle; + matched = !matched; + break; + } + } + /*if (!matched) { + DEBUG_PRINT("%s#%d, celsius(%d) falls into undefined range!!\n", + __func__, __LINE__, mcelsius_avg); + } */ + } + + *duty_cycle = new_duty_cycle; + return ONLP_STATUS_OK; +} + +int +onlp_sysi_platform_manage_fans(void) +{ + uint32_t fan_dir; + int ret; + int cur_duty_cycle, new_duty_cycle, tmp; + int direct_addon = 0; + onlp_oid_t fan_duty_oid = ONLP_FAN_ID_CREATE(FAN_ID_FOR_SET_FAN_DUTY); + + /********************************************************** + * Decision 1: Set fan as full speed if any fan is failed. + **********************************************************/ + ret = sysi_check_fan(&fan_dir); + if(ONLP_STATUS_OK != ret){ + return ret; + } + + if (fan_dir & ONLP_FAN_STATUS_B2F) { + direct_addon = FAN_DUTY_PLUS_FOR_DIR; + } + + /********************************************************** + * Decision 2: If no matched fan speed is found from the policy, + * use FAN_DUTY_CYCLE_MIN as default speed + **********************************************************/ + ret = sysi_get_fan_duty(&cur_duty_cycle); + if(ONLP_STATUS_OK != ret){ + return ret; + } + + /********************************************************** + * Decision 3: Decide new fan speed depend on fan direction and temperature + **********************************************************/ + ret = sysi_get_duty_by_average(&new_duty_cycle); + if (ONLP_STATUS_OK != ret){ + return ret; + } + ret = sysi_get_duty_by_highest(&tmp); + if (ONLP_STATUS_OK != ret){ + return ret; + } + + new_duty_cycle = (tmp > new_duty_cycle)? tmp : new_duty_cycle; + if (new_duty_cycle == 0) + { + new_duty_cycle = fan_control_data_pre.duty_cycle; + } else { + fan_control_data_pre.duty_cycle = new_duty_cycle; + } + fan_control_data_pre.dir_plus = direct_addon; + DEBUG_PRINT("[INFO]%s#%d, new duty: %d = %d + %d (%d)!\n", __func__, __LINE__, + new_duty_cycle + direct_addon, new_duty_cycle, direct_addon, cur_duty_cycle); + + new_duty_cycle += direct_addon; + new_duty_cycle = (new_duty_cycle > FAN_DUTY_CYCLE_MAX)? + FAN_DUTY_CYCLE_MAX : new_duty_cycle; + + if (new_duty_cycle == cur_duty_cycle) { + /* Duty cycle does not change, just return */ + return ONLP_STATUS_OK; + } + + return onlp_fani_percentage_set(fan_duty_oid, new_duty_cycle); +} + +int +onlp_sysi_platform_manage_leds(void) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/thermali.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/thermali.c new file mode 100755 index 00000000..2cce397c --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/thermali.c @@ -0,0 +1,188 @@ +/************************************************************ + * + * + * Copyright 2014 Big Switch Networks, Inc. + * Copyright 2014 Accton Technology Corporation. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * Thermal Sensor Platform Implementation. + * + ***********************************************************/ +//#include +#include +#include +#include "platform_lib.h" + +#define THERMAL_PATH_FORMAT "/sys/bus/i2c/devices/%s/*temp1_input" +#define PSU_THERMAL_PATH_FORMAT "/sys/bus/i2c/devices/%s/*psu_temp1_input" + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_THERMAL(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +enum onlp_thermal_id +{ + THERMAL_RESERVED = 0, + THERMAL_CPU_CORE, + THERMAL_1_ON_MAIN_BROAD, + THERMAL_2_ON_MAIN_BROAD, + THERMAL_3_ON_MAIN_BROAD, + THERMAL_4_ON_MAIN_BROAD, + THERMAL_5_ON_MAIN_BROAD, + THERMAL_6_ON_MAIN_BROAD, + THERMAL_7_ON_MAIN_BROAD, + THERMAL_1_ON_PSU1, + THERMAL_1_ON_PSU2, +}; + +static char* directory[] = /* must map with onlp_thermal_id */ +{ + NULL, + NULL, /* CPU_CORE files */ + "18-0048", + "18-0049", + "18-004a", + "18-004b", + "18-004c", + "18-004e", + "18-004f", + "10-0059", + "9-0058", +}; + +static char* cpu_coretemp_files[] = + { + "/sys/devices/platform/coretemp.0*temp2_input", + "/sys/devices/platform/coretemp.0*temp3_input", + "/sys/devices/platform/coretemp.0*temp4_input", + "/sys/devices/platform/coretemp.0*temp5_input", + NULL, + }; + +/* Static values */ +static onlp_thermal_info_t linfo[] = { + { }, /* Not used */ + { { ONLP_THERMAL_ID_CREATE(THERMAL_CPU_CORE), "CPU Core", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_MAIN_BROAD), "LM75-1-48", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_2_ON_MAIN_BROAD), "LM75-2-49", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_3_ON_MAIN_BROAD), "LM75-3-4A", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_4_ON_MAIN_BROAD), "LM75-4-4B", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_5_ON_MAIN_BROAD), "LM75-5-4C", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_6_ON_MAIN_BROAD), "LM75-6-4E", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_7_ON_MAIN_BROAD), "LM75-7-4F", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU1), "PSU-1 Thermal Sensor 1", ONLP_PSU_ID_CREATE(PSU1_ID)}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU2), "PSU-2 Thermal Sensor 1", ONLP_PSU_ID_CREATE(PSU2_ID)}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + } +}; + +/* + * This will be called to intiialize the thermali subsystem. + */ +int +onlp_thermali_init(void) +{ + return ONLP_STATUS_OK; +} + +/* + * Retrieve the information structure for the given thermal OID. + * + * If the OID is invalid, return ONLP_E_STATUS_INVALID. + * If an unexpected error occurs, return ONLP_E_STATUS_INTERNAL. + * Otherwise, return ONLP_STATUS_OK with the OID's information. + * + * Note -- it is expected that you fill out the information + * structure even if the sensor described by the OID is not present. + */ +int +onlp_thermali_info_get(onlp_oid_t id, onlp_thermal_info_t* info) +{ + int tid; + char *format = NULL; + char path[64] = {0}; + VALIDATE(id); + + tid = ONLP_OID_ID_GET(id); + + /* Set the onlp_oid_hdr_t and capabilities */ + *info = linfo[tid]; + if(tid == THERMAL_CPU_CORE) { + return onlp_file_read_int_max(&info->mcelsius, cpu_coretemp_files); + } + + switch (tid) { + case THERMAL_1_ON_MAIN_BROAD: + case THERMAL_2_ON_MAIN_BROAD: + case THERMAL_3_ON_MAIN_BROAD: + case THERMAL_4_ON_MAIN_BROAD: + case THERMAL_5_ON_MAIN_BROAD: + case THERMAL_6_ON_MAIN_BROAD: + case THERMAL_7_ON_MAIN_BROAD: + format = THERMAL_PATH_FORMAT; + break; + case THERMAL_1_ON_PSU1: + case THERMAL_1_ON_PSU2: + format = PSU_THERMAL_PATH_FORMAT; + break; + default: + return ONLP_STATUS_E_INVALID; + }; + + /* get path */ + sprintf(path, format, directory[tid], tid); + if (onlp_file_read_int(&info->mcelsius, path) < 0) { + AIM_LOG_ERROR("Unable to read status from file (%s)\r\n", path); + return ONLP_STATUS_E_INTERNAL; + } + + return ONLP_STATUS_OK; +} + + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_config.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_config.c new file mode 100755 index 00000000..ab3f5eca --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_config.c @@ -0,0 +1,80 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +/* */ +#define __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(_x) #_x +#define __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(_x) __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(_x) +x86_64_accton_as9716_32d_config_settings_t x86_64_accton_as9716_32d_config_settings[] = +{ +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_LOGGING(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_STDLIB(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_UCLI(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION + { __x86_64_accton_as9716_32d_config_STRINGIFY_NAME(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION), __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE(X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION) }, +#else +{ X86_64_ACCTON_AS9716_32D_CONFIG_INCLUDE_DEFAULT_FAN_DIRECTION(__x86_64_accton_as9716_32d_config_STRINGIFY_NAME), "__undefined__" }, +#endif + { NULL, NULL } +}; +#undef __x86_64_accton_as9716_32d_config_STRINGIFY_VALUE +#undef __x86_64_accton_as9716_32d_config_STRINGIFY_NAME + +const char* +x86_64_accton_as9716_32d_config_lookup(const char* setting) +{ + int i; + for(i = 0; x86_64_accton_as9716_32d_config_settings[i].name; i++) { + if(!strcmp(x86_64_accton_as9716_32d_config_settings[i].name, setting)) { + return x86_64_accton_as9716_32d_config_settings[i].value; + } + } + return NULL; +} + +int +x86_64_accton_as9716_32d_config_show(struct aim_pvs_s* pvs) +{ + int i; + for(i = 0; x86_64_accton_as9716_32d_config_settings[i].name; i++) { + aim_printf(pvs, "%s = %s\n", x86_64_accton_as9716_32d_config_settings[i].name, x86_64_accton_as9716_32d_config_settings[i].value); + } + return i; +} + +/* */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_enums.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_enums.c new file mode 100755 index 00000000..d8a78052 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_enums.c @@ -0,0 +1,10 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +/* <--auto.start.enum(ALL).source> */ +/* */ + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_int.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_int.h new file mode 100755 index 00000000..d7cdd0dc --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_int.h @@ -0,0 +1,12 @@ +/**************************************************************************//** + * + * x86_64_accton_as9716_32x Internal Header + * + *****************************************************************************/ +#ifndef __x86_64_accton_as9716_32d_INT_H__ +#define __x86_64_accton_as9716_32d_INT_H__ + +#include + + +#endif /* __x86_64_accton_as9716_32d_INT_H__ */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.c new file mode 100755 index 00000000..1c574de5 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.c @@ -0,0 +1,18 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +#include "x86_64_accton_as9716_32d_log.h" +/* + * x86_64_accton_as9716_32d log struct. + */ +AIM_LOG_STRUCT_DEFINE( + X86_64_ACCTON_AS9716_32D_CONFIG_LOG_OPTIONS_DEFAULT, + X86_64_ACCTON_AS9716_32D_CONFIG_LOG_BITS_DEFAULT, + NULL, /* Custom log map */ + X86_64_ACCTON_AS9716_32D_CONFIG_LOG_CUSTOM_BITS_DEFAULT + ); + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.h b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.h new file mode 100755 index 00000000..63a4ae5d --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_log.h @@ -0,0 +1,12 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#ifndef __x86_64_accton_as9716_32d_LOG_H__ +#define __x86_64_accton_as9716_32d_LOG_H__ + +#define AIM_LOG_MODULE_NAME x86_64_accton_as9716_32d +#include + +#endif /* __x86_64_accton_as9716_32d_LOG_H__ */ diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_module.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_module.c new file mode 100755 index 00000000..d3a8d966 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_module.c @@ -0,0 +1,24 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +#include "x86_64_accton_as9716_32d_log.h" + +static int +datatypes_init__(void) +{ +#define x86_64_accton_as9716_32d_ENUMERATION_ENTRY(_enum_name, _desc) AIM_DATATYPE_MAP_REGISTER(_enum_name, _enum_name##_map, _desc, AIM_LOG_INTERNAL); +#include + return 0; +} + +void __x86_64_accton_as9716_32d_module_init__(void) +{ + AIM_LOG_STRUCT_REGISTER(); + datatypes_init__(); +} + +int __onlp_platform_version__ = 1; diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_ucli.c b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_ucli.c new file mode 100755 index 00000000..25a3c13a --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/onlp/builds/src/module/src/x86_64_accton_as9716_32d_ucli.c @@ -0,0 +1,50 @@ +/**************************************************************************//** + * + * + * + *****************************************************************************/ +#include + +#if x86_64_accton_as9716_32d_CONFIG_INCLUDE_UCLI == 1 + +#include +#include +#include + +static ucli_status_t +x86_64_accton_as9716_32d_ucli_ucli__config__(ucli_context_t* uc) +{ + UCLI_HANDLER_MACRO_MODULE_CONFIG(x86_64_accton_as9716_32d) +} + +/* */ +/* */ + +static ucli_module_t +x86_64_accton_as9716_32d_ucli_module__ = + { + "x86_64_accton_as9716_32d_ucli", + NULL, + x86_64_accton_as9716_32d_ucli_ucli_handlers__, + NULL, + NULL, + }; + +ucli_node_t* +x86_64_accton_as9716_32d_ucli_node_create(void) +{ + ucli_node_t* n; + ucli_module_init(&x86_64_accton_as9716_32d_ucli_module__); + n = ucli_node_create("x86_64_accton_as9716_32d", NULL, &x86_64_accton_as9716_32d_ucli_module__); + ucli_node_subnode_add(n, ucli_module_log_node_create("x86_64_accton_as9716_32d")); + return n; +} + +#else +void* +x86_64_accton_as9716_32d_ucli_node_create(void) +{ + return NULL; +} +#endif + diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/Makefile b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/PKG.yml b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/PKG.yml new file mode 100755 index 00000000..26735549 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-config-platform.yml ARCH=amd64 VENDOR=accton BASENAME=x86-64-accton-as9716-32d REVISION=r0 diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/lib/x86-64-accton-as9716-32d-r0.yml b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/lib/x86-64-accton-as9716-32d-r0.yml new file mode 100755 index 00000000..35f03e03 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/lib/x86-64-accton-as9716-32d-r0.yml @@ -0,0 +1,31 @@ +--- + +###################################################################### +# +# platform-config for AS9716 +# +###################################################################### + +x86-64-accton-as9716-32d-r0: + + grub: + + serial: >- + --port=0x3f8 + --speed=115200 + --word=8 + --parity=no + --stop=1 + + kernel: + <<: *kernel-4-14 + + args: >- + nopat + console=ttyS0,115200n8 + + ##network: + ## interfaces: + ## ma1: + ## name: ~ + ## syspath: pci0000:00/0000:00:1c.0/0000:0a:00.0 diff --git a/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/python/x86_64_accton_as9716_32d_r0/__init__.py b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/python/x86_64_accton_as9716_32d_r0/__init__.py new file mode 100755 index 00000000..197ea810 --- /dev/null +++ b/packages/platforms/accton/x86-64/x86-64-accton-as9716_32d/platform-config/r0/src/python/x86_64_accton_as9716_32d_r0/__init__.py @@ -0,0 +1,78 @@ +from onl.platform.base import * +from onl.platform.accton import * + +class OnlPlatform_x86_64_accton_as9716_32d_r0(OnlPlatformAccton, + OnlPlatformPortConfig_48x25_6x100): + + PLATFORM='x86-64-accton-as9716-32d-r0' + MODEL="AS9716-32D" + SYS_OBJECT_ID=".9716.32" + + def baseconfig(self): + self.insmod('optoe') + self.insmod('accton_i2c_psu') + for m in [ 'cpld', 'fan', 'psu', 'leds' ]: + self.insmod("x86-64-accton-as9716-32d-%s.ko" % m) + + ########### initialize I2C bus 0 ########### + # initialize multiplexer (PCA9548) + self.new_i2c_device('pca9548', 0x77, 0) + # initiate multiplexer (PCA9548) + self.new_i2c_devices( + [ + # initiate multiplexer (PCA9548) + ('pca9548', 0x72, 1), + ('pca9548', 0x76, 1), + ] + ) + self.new_i2c_devices( + [ + # initiate multiplexer (PCA9548) + ('pca9548', 0x72, 2), + ('pca9548', 0x73, 2), + ('pca9548', 0x74, 2), + ('pca9548', 0x75, 2), + ('pca9548', 0x76, 2) + ] + ) + self.new_i2c_devices([ + # initialize CPLD + #initiate CPLD + ('as9716_32d_fpga', 0x60, 19), + ('as9716_32d_cpld1', 0x61, 20), + ('as9716_32d_cpld2', 0x62, 21), + ('as9716_32d_cpld_cpu', 0x65, 0), + ]) + self.new_i2c_devices([ + # initiate fan + # initiate chassis fan + ('as9716_32d_fan', 0x66, 17), + + # inititate LM75 + ('lm75', 0x48, 18), + ('lm75', 0x49, 18), + ('lm75', 0x4a, 18), + ('lm75', 0x4b, 18), + ('lm75', 0x4c, 18), + ('lm75', 0x4e, 18), + ('lm75', 0x4f, 18), + ]) + + self.new_i2c_devices([ + # initiate PSU-2 + ('as9716_32d_psu2', 0x51, 10), + ('acbel_fsh082', 0x59, 10), + + # initiate PSU-1 + ('as9716_32d_psu1', 0x50, 9), + ('acbel_fsh082', 0x58, 9), + ]) + + # initialize QSFP port 1~34 + for port in range(1, 35): + self.new_i2c_device('optoe1', 0x50, port+24) + subprocess.call('echo port%d > /sys/bus/i2c/devices/%d-0050/port_name' % (port, port+24), shell=True) + + + self.new_i2c_device('24c02', 0x56, 0) + return True