From 65cd247a0acca7c14b7e320415da8f3665d73a69 Mon Sep 17 00:00:00 2001 From: "shaohua.xiong" Date: Fri, 23 Feb 2018 16:25:05 +0800 Subject: [PATCH] add platform support for ag6248c and ag6248c_poe --- .../loader-initrd-files/src/bin/swiget | 9 + .../loader-initrd-files/src/bin/swimount | 23 +- .../src/bootmodes/installed | 4 +- .../lib/platform-config-defaults-uboot.yml | 7 + .../src/python/onl/install/BaseInstall.py | 228 +- .../src/python/onl/install/InstallUtils.py | 57 + .../src/python/onl/mounts/__init__.py | 40 +- .../src/python/onl/platform/base.py | 4 + .../3.2-lts/configs/arm-iproc-all/Makefile | 2 +- .../arm-iproc-all/arm-iproc-all.config | 4 +- ...latform-delta-ag6248c-device-drivers.patch | 181 ++ .../configs/arm-iproc-all/patches/series | 1 + packages/platforms/delta/armel/Makefile | 1 + .../delta/armel/arm-delta-ag6248c/Makefile | 1 + .../delta/armel/arm-delta-ag6248c/README.md | 25 + .../arm-delta-ag6248c-poe/.gitignore | 1 + .../arm-delta-ag6248c-poe/Makefile | 1 + .../arm-delta-ag6248c-poe/modules/Makefile | 1 + .../arm-delta-ag6248c-poe/modules/PKG.yml | 1 + .../modules/builds/.gitignore | 2 + .../modules/builds/Makefile | 6 + .../builds/arm-delta-ag6248c-poe-cpld-mux-1.c | 242 +++ .../builds/arm-delta-ag6248c-poe-cpld-mux-2.c | 243 +++ .../arm-delta-ag6248c-poe/onlp/Makefile | 1 + .../arm-delta-ag6248c-poe/onlp/PKG.yml | 1 + .../onlp/builds/Makefile | 2 + .../onlp/builds/lib/Makefile | 44 + .../lib/libonlp-arm-delta-ag6248c-poe.mk | 10 + .../onlp/builds/onlpdump/Makefile | 45 + .../platform-config/Makefile | 1 + .../platform-config/r0/Makefile | 1 + .../platform-config/r0/PKG.yml | 1 + .../r0/src/lib/arm-delta-ag6248c-poe-r0.yml | 42 + .../arm_delta_ag6248c_poe_r0/__init__.py | 21 + .../arm-delta-ag6248c/.gitignore | 2 + .../arm-delta-ag6248c/Makefile | 1 + .../arm-delta-ag6248c/modules/Makefile | 1 + .../arm-delta-ag6248c/modules/PKG.yml | 1 + .../modules/builds/.gitignore | 2 + .../arm-delta-ag6248c/modules/builds/Makefile | 6 + .../builds/arm-delta-ag6248c-cpld-mux-1.c | 242 +++ .../builds/arm-delta-ag6248c-cpld-mux-2.c | 243 +++ .../arm-delta-ag6248c/onlp/Makefile | 1 + .../arm-delta-ag6248c/onlp/PKG.yml | 1 + .../arm-delta-ag6248c/onlp/builds/Makefile | 2 + .../onlp/builds/lib/Makefile | 44 + .../builds/lib/libonlp-arm-delta-ag6248c.mk | 10 + .../onlp/builds/onlpdump/Makefile | 45 + .../platform-config/Makefile | 1 + .../platform-config/r0/Makefile | 1 + .../platform-config/r0/PKG.yml | 1 + .../r0/src/lib/arm-delta-ag6248c-r0.yml | 43 + .../python/arm_delta_ag6248c_r0/__init__.py | 23 + .../src/arm_delta_ag6248c/.gitignore | 2 + .../src/arm_delta_ag6248c/.module | 1 + .../src/arm_delta_ag6248c/Makefile | 28 + .../arm_delta_ag6248c/arm_delta_ag6248c.doxy | 1869 +++++++++++++++++ .../arm_delta_ag6248c/arm_delta_ag6248c.mk | 13 + .../module/auto/arm_delta_ag6248c.yml | 67 + .../src/arm_delta_ag6248c/module/auto/make.mk | 28 + .../inc/arm_delta_ag6248c/arm_delta_ag6248c.x | 34 + .../arm_delta_ag6248c_config.h | 162 ++ .../arm_delta_ag6248c/arm_delta_ag6248c_dox.h | 51 + .../arm_delta_ag6248c_porting.h | 132 ++ .../src/arm_delta_ag6248c/module/make.mk | 29 + .../src/arm_delta_ag6248c/module/src/Makefile | 30 + .../module/src/arm_delta_ag6248c_config.c | 101 + .../module/src/arm_delta_ag6248c_enums.c | 30 + .../module/src/arm_delta_ag6248c_int.h | 32 + .../module/src/arm_delta_ag6248c_log.c | 38 + .../module/src/arm_delta_ag6248c_log.h | 32 + .../module/src/arm_delta_ag6248c_module.c | 44 + .../module/src/arm_delta_ag6248c_ucli.c | 82 + .../module/src/arm_delta_i2c.c | 141 ++ .../module/src/arm_delta_i2c.h | 54 + .../src/arm_delta_ag6248c/module/src/fani.c | 470 +++++ .../src/arm_delta_ag6248c/module/src/ledi.c | 375 ++++ .../src/arm_delta_ag6248c/module/src/make.mk | 29 + .../module/src/platform_lib.c | 85 + .../module/src/platform_lib.h | 136 ++ .../src/arm_delta_ag6248c/module/src/psui.c | 381 ++++ .../src/arm_delta_ag6248c/module/src/sfpi.c | 364 ++++ .../src/arm_delta_ag6248c/module/src/sysi.c | 290 +++ .../arm_delta_ag6248c/module/src/thermali.c | 208 ++ .../platforms/delta/armel/modules/Makefile | 1 + .../platforms/delta/armel/modules/PKG.yml | 1 + 86 files changed, 7248 insertions(+), 15 deletions(-) create mode 100644 packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/platform-delta-ag6248c-device-drivers.patch create mode 100644 packages/platforms/delta/armel/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/README.md create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/.gitignore create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/PKG.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/.gitignore create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-1.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-2.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/PKG.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/libonlp-arm-delta-ag6248c-poe.mk create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/onlpdump/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/PKG.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/lib/arm-delta-ag6248c-poe-r0.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/python/arm_delta_ag6248c_poe_r0/__init__.py create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/.gitignore create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/PKG.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/.gitignore create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/Makefile create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-1.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-2.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/PKG.yml create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/libonlp-arm-delta-ag6248c.mk create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/onlpdump/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/PKG.yml create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/lib/arm-delta-ag6248c-r0.yml create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/python/arm_delta_ag6248c_r0/__init__.py create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.gitignore create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.module create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.doxy create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.mk create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/arm_delta_ag6248c.yml create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/make.mk create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c.x create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_config.h create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_dox.h create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_porting.h create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/make.mk create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/Makefile create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_config.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_enums.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_int.h create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.h create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_module.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_ucli.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.h create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/fani.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/ledi.c create mode 100644 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/make.mk create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.h create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/psui.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sfpi.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sysi.c create mode 100755 packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/thermali.c create mode 100644 packages/platforms/delta/armel/modules/Makefile create mode 100644 packages/platforms/delta/armel/modules/PKG.yml diff --git a/packages/base/all/initrds/loader-initrd-files/src/bin/swiget b/packages/base/all/initrds/loader-initrd-files/src/bin/swiget index 841ea130..3bee3891 100755 --- a/packages/base/all/initrds/loader-initrd-files/src/bin/swiget +++ b/packages/base/all/initrds/loader-initrd-files/src/bin/swiget @@ -19,6 +19,7 @@ import zipfile import onl.install.InstallUtils MountContext = onl.install.InstallUtils.MountContext BlkidParser = onl.install.InstallUtils.BlkidParser +UbinfoParser = onl.install.InstallUtils.UbinfoParser ProcMountsParser = onl.install.InstallUtils.ProcMountsParser import onl.mounts @@ -247,6 +248,14 @@ class Runner(onl.install.InstallUtils.SubprocessMixin): part = blkid[label] except IndexError: part = None + if part is None: + ubinfo = UbinfoParser(log=self.log) + part = {} + part = ubinfo[label] + device = "/dev/" + part['device'] + "_" + part['Volume ID'] + + return self.blockdevCopy(device, r, dir=mpt) + if part is not None: return self.blockdevCopy(part.device, r, dir=mpt) diff --git a/packages/base/all/initrds/loader-initrd-files/src/bin/swimount b/packages/base/all/initrds/loader-initrd-files/src/bin/swimount index b7ea1879..2741b5bd 100755 --- a/packages/base/all/initrds/loader-initrd-files/src/bin/swimount +++ b/packages/base/all/initrds/loader-initrd-files/src/bin/swimount @@ -11,6 +11,7 @@ import logging import onl.install.InstallUtils BlkidParser = onl.install.InstallUtils.BlkidParser +UbinfoParser = onl.install.InstallUtils.UbinfoParser import onl.mounts MountContext = onl.install.InstallUtils.MountContext @@ -26,6 +27,7 @@ class Runner(onl.install.InstallUtils.SubprocessMixin): self.log = log self.blkid = BlkidParser(log=self.log) + self.ubinfo = UbinfoParser(log=self.log) def mount(self, SWI): @@ -125,6 +127,13 @@ class Runner(onl.install.InstallUtils.SubprocessMixin): part = self.blkid[label] except IndexError: part = None + if part is None: + part = {} + part = self.ubinfo[label] + + device = "/dev/" + part['device'] + "_" + part['Volume ID'] + + return self.blockdevMount(device, path, dir=mpt) if part is not None: return self.blockdevMount(part.device, path, dir=mpt) @@ -141,7 +150,12 @@ class Runner(onl.install.InstallUtils.SubprocessMixin): if not os.path.exists(dst): self.log.error("missing SWI: %s", dst) return None - self.check_call(('mount', '-o', 'rw,remount', dst,)) + p = dev.find('ubi') + if p < 0: + self.check_call(('mount', '-o', 'rw,remount', dst,)) + else: + self.check_call(('mount', '-t', 'ubifs', '-o', 'rw,remount', dst,)) + return dst with MountContext(device=dev, log=self.log) as ctx: @@ -154,7 +168,12 @@ class Runner(onl.install.InstallUtils.SubprocessMixin): # move to its proper location as per mtab # XXX perms may not be right here if dir is not None: - self.check_call(('mount', '-o', 'rw,remount', ctx.dir,)) + p = dev.find('ubi') + if p < 0: + self.check_call(('mount', '-o', 'rw,remount', ctx.dir,)) + else: + self.check_call(('mount', '-t', 'ubifs', '-o', 'rw,remount', ctx.dir,)) + self.check_call(('mount', '--move', ctx.dir, dir,)) ctx.mounted = False dst = dir diff --git a/packages/base/all/initrds/loader-initrd-files/src/bootmodes/installed b/packages/base/all/initrds/loader-initrd-files/src/bootmodes/installed index 00aa3a41..dc0e887b 100755 --- a/packages/base/all/initrds/loader-initrd-files/src/bootmodes/installed +++ b/packages/base/all/initrds/loader-initrd-files/src/bootmodes/installed @@ -15,8 +15,8 @@ if [ ! -d /mnt/onl/data ]; then fi # make sure it's mounted as per mtab.yml -d1=$(stat -f -c '%d' /mnt/onl) -d2=$(stat -f -c '%d' /mnt/onl/data) +d1=$(stat -f -c '%b' /mnt/onl) +d2=$(stat -f -c '%b' /mnt/onl/data) if [ "$d1" -eq "$d2" ]; then msg_error "Unmounted /mnt/onl/data, disk boot cannot continue" exit 200 diff --git a/packages/base/all/vendor-config-onl/src/lib/platform-config-defaults-uboot.yml b/packages/base/all/vendor-config-onl/src/lib/platform-config-defaults-uboot.yml index 4ad068fb..6b66f8c6 100644 --- a/packages/base/all/vendor-config-onl/src/lib/platform-config-defaults-uboot.yml +++ b/packages/base/all/vendor-config-onl/src/lib/platform-config-defaults-uboot.yml @@ -129,6 +129,13 @@ default: - ext2load mmc 0:1 $onl_loadaddr $onl_itb - "bootm $onl_loadaddr#$onl_platform" + #ubifs to boot onl + flash_bootcmds: &flash_bootcmds + - ubi part open + - ubifsmount ONL-BOOT + - ubifsload $loadaddr $onl_itb + - "bootm $onl_loadaddr#$onl_platform" + nos_bootcmds: *ide_bootcmds # Configure the fw_env.config file, diff --git a/packages/base/all/vendor-config-onl/src/python/onl/install/BaseInstall.py b/packages/base/all/vendor-config-onl/src/python/onl/install/BaseInstall.py index 10878bce..3290ec34 100755 --- a/packages/base/all/vendor-config-onl/src/python/onl/install/BaseInstall.py +++ b/packages/base/all/vendor-config-onl/src/python/onl/install/BaseInstall.py @@ -17,7 +17,7 @@ import imp import fnmatch, glob from InstallUtils import SubprocessMixin -from InstallUtils import MountContext, BlkidParser, PartedParser +from InstallUtils import MountContext, BlkidParser, PartedParser, UbinfoParser from InstallUtils import ProcMountsParser from InstallUtils import GdiskParser from InstallUtils import OnieSubprocess @@ -83,6 +83,7 @@ class Base: # keep track of next partition/next block self.blkidParts = [] + self.ubiParts = [] # current scan of partitions and labels self.partedDevice = None @@ -853,7 +854,203 @@ class GrubInstaller(SubprocessMixin, Base): def shutdown(self): Base.shutdown(self) -class UbootInstaller(SubprocessMixin, Base): +class UBIfsCreater(SubprocessMixin, Base): + + def __init__(self, *args, **kwargs): + Base.__init__(self, *args, **kwargs) + self.log = logging.getLogger("ubinfo -a") + self.device = self.im.getDevice() + self.ubiParts = None + """Set up an UBI file system.""" + + def ubifsinit(self): + UNITS = { + 'GiB' : 1024 * 1024 * 1024, + 'G' : 1000 * 1000 * 1000, + 'MiB' : 1024 * 1024, + 'M' : 1000 * 1000, + 'KiB' : 1024, + 'K' : 1000, + } + try: + code = 0 + if not code: + mtd_num = self.device[-1] + cmd = ('ubiformat', '/dev/mtd' + mtd_num) + self.check_call(cmd, vmode=self.V2) + cmd = ('ubiattach', '-m', mtd_num, '-d', '0', '/dev/ubi_ctrl',) + self.check_call(cmd, vmode=self.V2) + for part in self.im.platformConf['installer']: + label, partData = list(part.items())[0] + if type(partData) == dict: + sz, fmt = partData['='], partData.get('format', 'ubifs') + else: + sz, fmt = partData, 'ubifs' + cnt = None + for ul, ub in UNITS.items(): + if sz.endswith(ul): + cnt = int(sz[:-len(ul)], 10) * ub + break + if cnt is None: + self.log.error("invalid size (no units) for %s: %s",part, sz) + return 1 + label = label.strip() + cmd = ('ubimkvol', '/dev/ubi0', '-N', label, '-s', bytes(cnt),) + self.check_call(cmd, vmode=self.V2) + except Exception: + self.log.exception("cannot create UBI file systemfrom %s",self.device) + + return 0 + + def ubi_mount(self, dir, devpart): + + if devpart is None: + self.log.error("Mount failed.no given mount device part") + return 1 + if dir is None: + self.log.error("Mount failed.no given mount directory") + return 1 + if self.ubiParts is None: + try: + self.ubiParts = UbinfoParser(log=self.log.getChild("ubinfo -a")) + except Exception: + self.log.exception("Mount failed.No UBIfs") + return 1 + try: + dev = self.ubiParts[devpart] + except IndexError as ex: + self.log.error("Mount failed.cannot find %s partition", str(devpart)) + return 1 + self.makedirs(dir) + device = "/dev/" + dev['device'] + "_" + dev['Volume ID'] + if dev['fsType']: + cmd = ('mount', '-t', dev['fsType'], device, dir,) + else: + cmd = ('mount', device, dir,) + code = self.check_call(cmd, vmode=self.V2) + if code: + self.log.error("Mount failed.mount command exect failed") + return 1 + return 0 + + def ubi_unmount(self,dir=None): + + if dir is None: + self.log.error("Unmount failed.no given unmount directory") + return 1 + cmd = ('umount', dir) + code = self.check_call(cmd, vmode=self.V2) + if code: + self.log.error("Unmount failed.umount command exect failed") + return 1 + return 0 + + def ubi_getinfo(self): + try: + self.ubiParts = UbinfoParser(log=self.log.getChild("ubinfo -a")) + except Exception: + self.log.exception("UBI info get failed.No UBIfs") + return 1 + return 0 + + def ubi_installSwi(self): + + files = os.listdir(self.im.installerConf.installer_dir) + self.zf.namelist() + + swis = [x for x in files if x.endswith('.swi')] + + if not swis: + self.log.warn("No ONL Software Image available for ubi installation.") + self.log.warn("Post-install ZTN installation will be required.") + + if len(swis) > 1: + self.log.error("Multiple SWIs found in ubi installer: %s", " ".join(swis)) + return 1 + + base = swis[0] + + self.log.info("Installing ONL Software Image (%s)...", base) + dev = "ONL-IMAGES" + dstDir = "/tmp/ubifs" + code = self.ubi_mount(dstDir,dev) + if code : + return 1 + dst = os.path.join(dstDir, base) + self.installerCopy(base, dst) + self.log.info("syncing block devices(%s)...",dev) + self.check_call(('sync',)) + self.ubi_unmount(dstDir) + return 0 + + def ubi_installLoader(self): + + loaderBasename = None + for c in sysconfig.installer.fit: + if self.installerExists(c): + loaderBasename = c + break + if not loaderBasename: + self.log.error("The platform loader file is missing.") + return 1 + + self.log.info("Installing the ONL loader from %s...", loaderBasename) + dev = "ONL-BOOT" + dstDir = "/tmp/ubiloader" + code = self.ubi_mount(dstDir,dev) + if code : + return 1 + dst = os.path.join(dstDir, "%s.itb" % self.im.installerConf.installer_platform) + self.installerCopy(loaderBasename, dst) + self.log.info("syncing block devices(%s)...",dev) + self.check_call(('sync',)) + self.ubi_unmount(dstDir) + return 0 + + def ubi_installBootConfig(self): + + basename = 'boot-config' + + self.log.info("Installing boot-config to ONL-BOOT partion") + dev = "ONL-BOOT" + dstDir = "/tmp/ubibootcon" + code = self.ubi_mount(dstDir,dev) + if code : + return 1 + dst = os.path.join(dstDir, basename) + self.installerCopy(basename, dst, True) + with open(dst) as fd: + buf = fd.read() + ecf = buf.encode('base64', 'strict').strip() + if self.im.grub and self.im.grubEnv is not None: + setattr(self.im.grubEnv, 'boot_config_default', ecf) + if self.im.uboot and self.im.ubootEnv is not None: + setattr(self.im.ubootEnv, 'boot-config-default', ecf) + self.log.info("syncing block devices(%s)...",dev) + self.check_call(('sync',)) + self.ubi_unmount(dstDir) + return 0 + + def ubi_installOnlConfig(self): + + self.log.info("Installing onl-config to ONL-CONFIG partion") + dev = "ONL-CONFIG" + dstDir = "/tmp/ubionlconfig" + code = self.ubi_mount(dstDir,dev) + if code : + return 1 + for f in self.zf.namelist(): + d = 'config/' + if f.startswith(d) and f != d: + dst = os.path.join(dstDir, os.path.basename(f)) + if not os.path.exists(dst): + self.installerCopy(f, dst) + self.log.info("syncing block devices(%s)...",dev) + self.check_call(('sync',)) + self.ubi_unmount(dstDir) + return 0 + + +class UbootInstaller(SubprocessMixin, UBIfsCreater): class installmeta(Base.installmeta): @@ -874,13 +1071,16 @@ class UbootInstaller(SubprocessMixin, Base): cmds.append("setenv onl_itb %s" % itb) for item in self.platformConf['loader']['setenv']: k, v = list(item.items())[0] - cmds.append("setenv %s %s" % (k, v,)) + device = self.getDevice() + if "mtdblock" in device: + cmds.append("setenv %s %s ${platformargs} ubi.mtd=%s root=/dev/ram ethaddr=$ethaddr" % (k, v, device[-1],)) + else: + cmds.append("setenv %s %s" % (k, v,)) cmds.extend(self.platformConf['loader']['nos_bootcmds']) return "; ".join(cmds) def __init__(self, *args, **kwargs): - Base.__init__(self, *args, **kwargs) - + UBIfsCreater.__init__(self, *args, **kwargs) self.device = self.im.getDevice() self.rawLoaderDevice = None @@ -1014,6 +1214,24 @@ class UbootInstaller(SubprocessMixin, Base): code = self.assertUnmounted() if code: return code + + if "mtdblock" in self.device: + code = self.ubifsinit() + if code: return code + code = self.ubi_getinfo() + if code: return code + code = self.ubi_installSwi() + if code: return code + code = self.ubi_installLoader() + if code: return code + code = self.ubi_installBootConfig() + if code: return code + code = self.ubi_installOnlConfig() + if code: return code + code = self.runPlugins(Plugin.PLUGIN_POSTINSTALL) + if code: return code + code = self.installUbootEnv() + return code code = self.maybeCreateLabel() if code: return code diff --git a/packages/base/all/vendor-config-onl/src/python/onl/install/InstallUtils.py b/packages/base/all/vendor-config-onl/src/python/onl/install/InstallUtils.py index ccb4615e..85fe2c01 100644 --- a/packages/base/all/vendor-config-onl/src/python/onl/install/InstallUtils.py +++ b/packages/base/all/vendor-config-onl/src/python/onl/install/InstallUtils.py @@ -388,6 +388,63 @@ class BlkidParser(SubprocessMixin): def __len__(self): return len(self.parts) +class UbinfoParser(SubprocessMixin): + + def __init__(self, log=None): + self.log = log or logging.getLogger("ubinfo -a") + self.parse() + + def parse(self): + self.parts = [] + lines = '' + try: + cmd = ('ubinfo', '-a',) + lines = self.check_output(cmd).splitlines() + except Exception as ex: + return self + + dev = None + volId = None + name = None + attrs = {} + for line in lines: + line = line.strip() + + p = line.find(':') + if p < 0: continue + name, value = line[:p], line[p+1:].strip() + if 'Volume ID' in name: + p = value.find('(') + if p < 0: continue + volumeId = value[:p].strip() + attrs['Volume ID'] = volumeId + p = value.find('on') + if p < 0: continue + dev = value[p+2:-1].strip() + attrs['device'] = dev + + if 'Name' in name: + dev = "/dev/" + dev + "_" + volumeId + p = line.find(':') + if p < 0: continue + attrs['Name'] = line[p+1:].strip() + attrs['fsType'] = 'ubifs' + self.parts.append(attrs) + dev = None + volId = None + name = None + attrs = {} + + def __getitem__(self, idxOrName): + if type(idxOrName) == int: + return self.parts[idxOrName] + for part in self.parts: + if part['Name'] == idxOrName: return part + raise IndexError("cannot find partition %s" % repr(idxOrName)) + + def __len__(self): + return len(self.parts) + class ProcMtdEntry: def __init__(self, diff --git a/packages/base/all/vendor-config-onl/src/python/onl/mounts/__init__.py b/packages/base/all/vendor-config-onl/src/python/onl/mounts/__init__.py index bf591df6..e6d24391 100755 --- a/packages/base/all/vendor-config-onl/src/python/onl/mounts/__init__.py +++ b/packages/base/all/vendor-config-onl/src/python/onl/mounts/__init__.py @@ -63,7 +63,12 @@ class MountManager(object): self.logger.debug("%s not mounted @ %s. It will be mounted %s" % (device, directory, mode)) try: - cmd = "mount -o %s %s %s" % (','.join(mountargs), device, directory) + p = device.find('ubi') + if p < 0: + cmd = "mount -o %s %s %s" % (','.join(mountargs), device, directory) + else: + cmd = "mount -o %s -t %s %s %s" % (','.join(mountargs), 'ubifs', device, directory) + self.logger.debug("+ %s" % cmd) subprocess.check_call(cmd, shell=True) except subprocess.CalledProcessError, e: @@ -148,12 +153,39 @@ class OnlMountManager(object): def _discover(k): v = md[k] lbl = v.get('label', k) - + useUbiDev = False try: v['device'] = subprocess.check_output(('blkid', '-L', lbl,)).strip() except subprocess.CalledProcessError: - return False - + useUbiDev = True + if useUbiDev == True: + if k == 'EFI-BOOT': + return False + output = subprocess.check_output("ubinfo -d 0 -N %s" % k, shell=True).splitlines() + volumeId = None + device = None + for line in output: + line = line.strip() + p = line.find(':') + if p < 0: + self.logger.debug("Invaild ubinfo output %s" % line) + + name, value = line[:p], line[p+1:].strip() + if 'Volume ID' in name: + p = value.find('(') + if p < 0: + self.logger.debug("Invalid Volume ID %s" % value) + + volumeId = value[:p].strip() + p = value.find('on') + if p < 0: + self.logger.debug("Invalid ubi devicde %s" % value) + + device = value[p+2:-1].strip() + if 'Name' in name: + v['device'] = "/dev/" + device + "_" + volumeId + + if not os.path.isdir(v['dir']): self.logger.debug("Make directory '%s'...", v['dir']) os.makedirs(v['dir']) diff --git a/packages/base/all/vendor-config-onl/src/python/onl/platform/base.py b/packages/base/all/vendor-config-onl/src/python/onl/platform/base.py index b0849cf8..a2d00feb 100755 --- a/packages/base/all/vendor-config-onl/src/python/onl/platform/base.py +++ b/packages/base/all/vendor-config-onl/src/python/onl/platform/base.py @@ -477,6 +477,10 @@ class OnlPlatformPortConfig_48x1_4x10(object): PORT_COUNT=52 PORT_CONFIG="48x1 + 4x10" +class OnlPlatformPortConfig_48x1_2x10(object): + PORT_COUNT=50 + PORT_CONFIG="48x1 + 2x10" + class OnlPlatformPortConfig_48x10_4x40(object): PORT_COUNT=52 PORT_CONFIG="48x10 + 4x40" diff --git a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/Makefile b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/Makefile index b16fc9d4..49f02b06 100644 --- a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/Makefile +++ b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/Makefile @@ -38,6 +38,6 @@ K_COPY_DST := kernel-3.2-lts-arm-iproc-all.bin.gz endif export ARCH=arm -DTS_LIST := accton_as4610_54 +DTS_LIST := accton_as4610_54 delta_ag6248c include $(ONL)/make/kbuild.mk diff --git a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/arm-iproc-all.config b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/arm-iproc-all.config index 4df4b2f3..e70dd3b3 100644 --- a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/arm-iproc-all.config +++ b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/arm-iproc-all.config @@ -289,6 +289,7 @@ CONFIG_BCM_RAM_START_RESERVED_SIZE=0x200000 # CONFIG_MACH_GH is not set # CONFIG_MACH_DNI_3448P is not set CONFIG_MACH_ACCTON_AS4610_54=y +CONFIG_MACH_DELTA_AG6248C=y # CONFIG_MACH_IPROC_EMULATION is not set # @@ -1938,7 +1939,8 @@ CONFIG_IPROC_QSPI_SINGLE_MODE=y # CONFIG_IPROC_QSPI_DUAL_MODE is not set # CONFIG_IPROC_QSPI_QUAD_MODE is not set CONFIG_IPROC_QSPI_MAX_HZ=62500000 -# CONFIG_IPROC_MTD_NAND is not set +CONFIG_IPROC_MTD_NAND=y +# CONFIG_IPROC_MTD_NAND_USE_JFFS2 is not set # CONFIG_IPROC_PWM is not set CONFIG_IPROC_USB2H=y CONFIG_USB_EHCI_BCM=y diff --git a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/platform-delta-ag6248c-device-drivers.patch b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/platform-delta-ag6248c-device-drivers.patch new file mode 100644 index 00000000..6dd2774b --- /dev/null +++ b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/platform-delta-ag6248c-device-drivers.patch @@ -0,0 +1,181 @@ +diff --git a/arch/arm/boot/dts/delta_ag6248c.dts b/arch/arm/boot/dts/delta_ag6248c.dts +new file mode 100755 +index 0000000..f86c35b +--- /dev/null ++++ b/arch/arm/boot/dts/delta_ag6248c.dts +@@ -0,0 +1,78 @@ ++/* ++ * Delta Networks, Inc. AG6248C Device Tree Source ++ * ++ * Copyright 2015, Cumulus Networks, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++/dts-v1/; ++/include/ "helix4.dtsi" ++ ++/ { ++ model = "delta,ag6248c"; ++ compatible = "delta,ag6248c"; ++ ++ aliases { ++ serial0 = &uart0; ++ i2c-controller0 = &i2c0; ++ i2c-controller1 = &i2c1; ++ }; ++ ++ memory { ++ reg = <0x61000000 0x7f000000>; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ next-level-cache = <&L2>; ++ reg = <0x00>; ++ }; ++ cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ next-level-cache = <&L2>; ++ reg = <0x01>; ++ }; ++ }; ++ ++ localbus@1e000000{ ++ address-cells = <0x2>; ++ #size-cells = <0x1>; ++ compatible = "simple-bus"; ++ ranges = <0x0 0x0 0x1e000000 0x02000000>; ++ ++ }; ++ ++ i2c0: i2c@18038000 { ++ compatible = "iproc-smb"; ++ reg = <0x18038000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = < 127 >; ++ clock-frequency = <400000>; ++ rtc@68 { ++ compatible = "m41st85"; ++ reg = <0x68>; ++ }; ++ }; ++ ++ ++ i2c1: i2c@1803b000 { ++ compatible = "iproc-smb"; ++ reg = <0x1803b000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupts = < 128 >; ++ clock-frequency = <100000>; ++ ++ }; ++}; +diff --git a/arch/arm/mach-iproc/Kconfig b/arch/arm/mach-iproc/Kconfig +index c77208d..c6a87fc 100644 +--- a/arch/arm/mach-iproc/Kconfig ++++ b/arch/arm/mach-iproc/Kconfig +@@ -49,6 +49,12 @@ config MACH_ACCTON_AS4610_54 + help + Support for Accton AS4610-54 POE and non -POE board. + ++config MACH_DELTA_AG6248C ++ select ARM_L1_CACHE_SHIFT_6 ++ bool "Support Delta AG6248C board" ++ help ++ Support for Delta AG6248C board. ++ + config MACH_IPROC_P7 + bool "Support iProc Profile 7 architecture" + depends on MACH_GH +diff --git a/arch/arm/mach-iproc/board_bu.c b/arch/arm/mach-iproc/board_bu.c +index 7e07ed1..5479020 100644 +--- a/arch/arm/mach-iproc/board_bu.c ++++ b/arch/arm/mach-iproc/board_bu.c +@@ -1083,6 +1083,7 @@ MACHINE_END + static const char * helix4_dt_board_compat[] = { + "dni,dni_3448p", + "accton,as4610_54", ++ "delta,ag6248c", + NULL + }; + +diff --git a/arch/arm/mach-iproc/common.c b/arch/arm/mach-iproc/common.c +index b116ffc..e911a2b 100644 +--- a/arch/arm/mach-iproc/common.c ++++ b/arch/arm/mach-iproc/common.c +@@ -187,7 +187,8 @@ static struct platform_device wdt_device = + enum { + HX4_NONE = 0, + HX4_DNI_3448P, +- HX4_ACCTON_AS4610_54 ++ HX4_ACCTON_AS4610_54, ++ HX4_DELTA_AG6248C, + }; + + /* +@@ -212,6 +213,8 @@ int brcm_get_hx4_model(void) + return HX4_DNI_3448P; + else if (!strcmp(model, "accton,as4610_54")) + return HX4_ACCTON_AS4610_54; ++ else if (!strcmp(model, "delta,ag6248c")) ++ return HX4_DELTA_AG6248C; + + printk( KERN_ERR "Unknown Model %s\n", model ); + return HX4_NONE; +diff --git a/arch/arm/mach-iproc/include/mach/iproc_regs.h b/arch/arm/mach-iproc/include/mach/iproc_regs.h +index 460c436..50ea557 100644 +--- a/arch/arm/mach-iproc/include/mach/iproc_regs.h ++++ b/arch/arm/mach-iproc/include/mach/iproc_regs.h +@@ -364,7 +364,11 @@ + #define IPROC_GMAC3_INT 182 + #elif (defined(CONFIG_MACH_HX4) || defined(CONFIG_MACH_KT2) || defined(CONFIG_MACH_DNI_3448P) || \ + defined(CONFIG_MACH_ACCTON_AS4610_54)) ++#if defined(CONFIG_MACH_DELTA_AG6248C) ++#define IPROC_NUM_GMACS 1 ++#else + #define IPROC_NUM_GMACS 2 ++#endif + #define IPROC_GMAC0_REG_BASE (GMAC0_DEVCONTROL) //(0x18022000) + #define IPROC_GMAC1_REG_BASE (GMAC1_DEVCONTROL) //(0x18023000) + #define IPROC_GMAC2_REG_BASE (0) // n/a +diff --git a/drivers/bcmdrivers/gmac/src/shared/nvramstubs.c b/drivers/bcmdrivers/gmac/src/shared/nvramstubs.c +index d5b400d..a823697 100644 +--- a/drivers/bcmdrivers/gmac/src/shared/nvramstubs.c ++++ b/drivers/bcmdrivers/gmac/src/shared/nvramstubs.c +@@ -143,7 +143,8 @@ __setup("envaddr=", envaddr_setup); + enum { + HX4_NONE = 0, + HX4_DNI_3448P, +- HX4_ACCTON_AS4610_54 ++ HX4_ACCTON_AS4610_54, ++ HX4_DELTA_AG6248C + }; + + static void +@@ -158,7 +159,10 @@ setup_uboot_vars(void) { + } else if (modelnum == HX4_ACCTON_AS4610_54) { + env_offset = 0x000f0000; + uboot_vars_start = CONFIG_SPI_BASE + env_offset; +- } ++ }else if (modelnum == HX4_DELTA_AG6248C) { ++ env_offset = 0x00300000; ++ uboot_vars_start = CONFIG_NAND_BASE + env_offset; ++ } + } + + /* +-- +2.1.4 + diff --git a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/series b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/series index e2adb686..3028ed13 100644 --- a/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/series +++ b/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/series @@ -506,3 +506,4 @@ scripts_package_Makefile.patch tools_include_tools_be_byteshift.h.patch tools_include_tools_le_byteshift.h.patch platform-accton-as4610-device-drivers.patch +platform-delta-ag6248c-device-drivers.patch diff --git a/packages/platforms/delta/armel/Makefile b/packages/platforms/delta/armel/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/README.md b/packages/platforms/delta/armel/arm-delta-ag6248c/README.md new file mode 100644 index 00000000..b49d2126 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/README.md @@ -0,0 +1,25 @@ +#How to run ONL in DELTA AG6248C board + +For the first step, it only support install the ONL to the USB and boot up. +It will be support to install the ONL to NandFlash next step. + +Build the ONL +-------------------------------------------------------------------------- +Please refer the $ONL/docs/Building.md + +Install the ONL through ONIE +-------------------------------------------------------------------------- +``` +ONIE:/ # onie-discovery-stop +discover: installer mode detected. +Stopping: discover... done. +ONIE:/ # +ONIE:/ # ifconfig eth0 192.168.1.1 #configure the DUT IP address +ONIE:/ # tftp -r ONL-2.*_ARMEL_INSTALLED_INSTALLER -g 192.168.1.99 -b 10240 +ONIE:/ # onie-nos-install ONL-2.*_ARMEL_INSTALLED_INSTALLER +``` +Boot the ONL +-------------------------------------------------------------------------- +Device will reboot automatically after install the ONL installer successfull. + +Now it will start the ONL boot progress. diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/.gitignore b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/.gitignore new file mode 100755 index 00000000..9f7b1342 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/.gitignore @@ -0,0 +1 @@ +onlpdump.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/PKG.yml new file mode 100755 index 00000000..4375c960 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-modules.yml ARCH=armel VENDOR=delta BASENAME=arm-delta-ag6248c-poe KERNELS="onl-kernel-3.2-lts-arm-iproc-all:armel" diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/.gitignore b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/.gitignore new file mode 100755 index 00000000..a813c369 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/.gitignore @@ -0,0 +1,2 @@ +onlpdump.mk +lib diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/Makefile new file mode 100755 index 00000000..98c58425 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/Makefile @@ -0,0 +1,6 @@ +KERNELS := onl-kernel-3.2-lts-arm-iproc-all:armel +KMODULES := $(wildcard *.c) +VENDOR := delta +BASENAME := arm-delta-ag6248c-poe +ARCH := arm +include $(ONL)/make/kmodule.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-1.c b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-1.c new file mode 100755 index 00000000..29686679 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-1.c @@ -0,0 +1,242 @@ +/* + * An I2C multiplexer dirver for delta as5812 CPLD + * + * Copyright (C) 2015 Delta Technology Corporation. + * Brandon Chuang + * + * This module supports the delta cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Delta ag7648c CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CTRL_CPLD_BUS 0x0 +#define CTRL_CPLD_I2C_ADDR 0x28 +#define PARENT_CHAN 0x0 +#define NUM_OF_CPLD_CHANS 0x2 + +#define CPLD_CHANNEL_SELECT_REG 0x19 +#define CPLD_CHANNEL_SELECT_MASK 0x3 +#define CPLD_CHANNEL_SELECT_OFFSET 0x0 + +#define CPLD_DESELECT_CHANNEL 0xff + +#define CPLD_MUX_MAX_NCHANS 0x2 +enum cpld_mux_type { + delta_cpld_mux +}; + +struct delta_i2c_cpld_mux { + enum cpld_mux_type type; + struct i2c_adapter *virt_adaps[CPLD_MUX_MAX_NCHANS]; + u8 last_chan; /* last register value */ +}; + +struct chip_desc { + u8 nchans; + u8 deselectChan; +}; + +/* Provide specs for the PCA954x types we know about */ +static const struct chip_desc chips[] = { + [delta_cpld_mux] = { + .nchans = NUM_OF_CPLD_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + } +}; + +static struct delta_i2c_cpld_mux *cpld_mux_data; + +static struct device dump_dev; + +/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() + for this as they will try to lock adapter a second time */ +static int delta_i2c_cpld_mux_reg_write(struct i2c_adapter *adap, + struct i2c_client *client, u8 val) +{ + unsigned long orig_jiffies; + unsigned short flags; + union i2c_smbus_data data; + struct i2c_adapter *ctrl_adap; + int try; + s32 res = -EIO; + u8 reg_val = 0; + + data.byte = val; + flags = 0; + + ctrl_adap = i2c_get_adapter(CTRL_CPLD_BUS); + if (!ctrl_adap) + return res; + + // try to lock it + if (ctrl_adap->algo->smbus_xfer) { + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= ctrl_adap->retries; try++) { + // read first + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_READ, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + + // modify the field we wanted + data.byte &= ~(CPLD_CHANNEL_SELECT_MASK << CPLD_CHANNEL_SELECT_OFFSET); + reg_val |= ((val & CPLD_CHANNEL_SELECT_MASK) << CPLD_CHANNEL_SELECT_OFFSET); + data.byte |= reg_val; + + // modify the register + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_WRITE, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + ctrl_adap->timeout)) + break; + } + } + + return res; +} + +static int delta_i2c_cpld_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (cpld_mux_data->last_chan != regval) { + ret = delta_i2c_cpld_mux_reg_write(NULL, NULL, regval); + cpld_mux_data->last_chan = regval; + } + + return ret; +} + +static int delta_i2c_cpld_mux_deselect_mux(struct i2c_adapter *adap, + void *client, u32 chan) +{ + /* Deselect active channel */ + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; + + return delta_i2c_cpld_mux_reg_write(NULL, NULL, cpld_mux_data->last_chan); +} + +/* + * I2C init/probing/exit functions + */ +static int __delta_i2c_cpld_mux_init(void) +{ + struct i2c_adapter *adap = i2c_get_adapter(PARENT_CHAN); + int chan=0; + int ret = -ENODEV; + + memset (&dump_dev, 0, sizeof(dump_dev)); + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto err; + + if (!adap) + goto err; + + cpld_mux_data = kzalloc(sizeof(struct delta_i2c_cpld_mux), GFP_KERNEL); + if (!cpld_mux_data) { + ret = -ENOMEM; + goto err; + } + + cpld_mux_data->type = delta_cpld_mux; + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; /* force the first selection */ + + /* Now create an adapter for each channel */ + for (chan = 0; chan < NUM_OF_CPLD_CHANS; chan++) { + cpld_mux_data->virt_adaps[chan] = i2c_add_mux_adapter(adap, &dump_dev, NULL, 0, + chan, + delta_i2c_cpld_mux_select_chan, + delta_i2c_cpld_mux_deselect_mux); + + if (cpld_mux_data->virt_adaps[chan] == NULL) { + ret = -ENODEV; + printk("failed to register multiplexed adapter %d, parent %d\n", chan, PARENT_CHAN); + goto virt_reg_failed; + } + } + + printk("registered %d multiplexed busses for I2C mux bus %d\n", + chan, PARENT_CHAN); + + return 0; + +virt_reg_failed: + for (chan--; chan >= 0; chan--) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + } + + kfree(cpld_mux_data); +err: + return ret; +} + +static int __delta_i2c_cpld_mux_remove(void) +{ + const struct chip_desc *chip = &chips[cpld_mux_data->type]; + int chan; + + for (chan = 0; chan < chip->nchans; ++chan) { + if (cpld_mux_data->virt_adaps[chan]) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + cpld_mux_data->virt_adaps[chan] = NULL; + } + } + + kfree(cpld_mux_data); + + return 0; +} + +static int __init delta_i2c_cpld_mux_init(void) +{ + return __delta_i2c_cpld_mux_init (); +} + +static void __exit delta_i2c_cpld_mux_exit(void) +{ + __delta_i2c_cpld_mux_remove (); +} + +MODULE_AUTHOR("Dave Hu "); +MODULE_DESCRIPTION("Delta I2C CPLD mux driver"); +MODULE_LICENSE("GPL"); + +module_init(delta_i2c_cpld_mux_init); +module_exit(delta_i2c_cpld_mux_exit); + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-2.c b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-2.c new file mode 100755 index 00000000..c3354b89 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/modules/builds/arm-delta-ag6248c-poe-cpld-mux-2.c @@ -0,0 +1,243 @@ +/* + * An I2C multiplexer dirver for delta as5812 CPLD + * + * Copyright (C) 2015 Delta Technology Corporation. + * Brandon Chuang + * + * This module supports the delta cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Delta ag7648c CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CTRL_CPLD_BUS 0x0 +#define CTRL_CPLD_I2C_ADDR 0x28 +#define PARENT_CHAN 0x1 +#define NUM_OF_CPLD_CHANS 0x2 + +#define CPLD_CHANNEL_SELECT_REG 0x19 +#define CPLD_CHANNEL_SELECT_MASK 0x3 +#define CPLD_CHANNEL_SELECT_OFFSET 0x5 + +#define CPLD_DESELECT_CHANNEL 0xff + +#define CPLD_MUX_MAX_NCHANS 0x2 +enum cpld_mux_type { + delta_cpld_mux +}; + +struct delta_i2c_cpld_mux { + enum cpld_mux_type type; + struct i2c_adapter *virt_adaps[CPLD_MUX_MAX_NCHANS]; + u8 last_chan; /* last register value */ +}; + +struct chip_desc { + u8 nchans; + u8 deselectChan; +}; + +/* Provide specs for the PCA954x types we know about */ +static const struct chip_desc chips[] = { + [delta_cpld_mux] = { + .nchans = NUM_OF_CPLD_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + } +}; + +static struct delta_i2c_cpld_mux *cpld_mux_data; + +static struct device dump_dev; + +/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() + for this as they will try to lock adapter a second time */ +static int delta_i2c_cpld_mux_reg_write(struct i2c_adapter *adap, + struct i2c_client *client, u8 val) +{ + unsigned long orig_jiffies; + unsigned short flags; + union i2c_smbus_data data; + struct i2c_adapter *ctrl_adap; + int try; + s32 res = -EIO; + u8 reg_val = 0; + + data.byte = val; + flags = 0; + + ctrl_adap = i2c_get_adapter(CTRL_CPLD_BUS); + if (!ctrl_adap) + return res; + + + // try to lock it + if (ctrl_adap->algo->smbus_xfer) { + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= ctrl_adap->retries; try++) { + // read first + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_READ, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + + // modify the field we wanted + data.byte &= ~(CPLD_CHANNEL_SELECT_MASK << CPLD_CHANNEL_SELECT_OFFSET); + reg_val |= ((val & CPLD_CHANNEL_SELECT_MASK) << CPLD_CHANNEL_SELECT_OFFSET); + data.byte |= reg_val; + + // modify the register + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_WRITE, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + ctrl_adap->timeout)) + break; + } + } + + return res; +} + +static int delta_i2c_cpld_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (cpld_mux_data->last_chan != regval) { + ret = delta_i2c_cpld_mux_reg_write(NULL, NULL, regval); + cpld_mux_data->last_chan = regval; + } + + return ret; +} + +static int delta_i2c_cpld_mux_deselect_mux(struct i2c_adapter *adap, + void *client, u32 chan) +{ + /* Deselect active channel */ + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; + + return delta_i2c_cpld_mux_reg_write(NULL, NULL, cpld_mux_data->last_chan); +} + +/* + * I2C init/probing/exit functions + */ +static int __delta_i2c_cpld_mux_init(void) +{ + struct i2c_adapter *adap = i2c_get_adapter(PARENT_CHAN); + int chan=0; + int ret = -ENODEV; + + memset (&dump_dev, 0, sizeof(dump_dev)); + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto err; + + if (!adap) + goto err; + + cpld_mux_data = kzalloc(sizeof(struct delta_i2c_cpld_mux), GFP_KERNEL); + if (!cpld_mux_data) { + ret = -ENOMEM; + goto err; + } + + cpld_mux_data->type = delta_cpld_mux; + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; /* force the first selection */ + + /* Now create an adapter for each channel */ + for (chan = 0; chan < NUM_OF_CPLD_CHANS; chan++) { + cpld_mux_data->virt_adaps[chan] = i2c_add_mux_adapter(adap, &dump_dev, NULL, 0, + chan, + delta_i2c_cpld_mux_select_chan, + delta_i2c_cpld_mux_deselect_mux); + + if (cpld_mux_data->virt_adaps[chan] == NULL) { + ret = -ENODEV; + printk("failed to register multiplexed adapter %d, parent %d\n", chan, PARENT_CHAN); + goto virt_reg_failed; + } + } + + printk("registered %d multiplexed busses for I2C mux bus %d\n", + chan, PARENT_CHAN); + + return 0; + +virt_reg_failed: + for (chan--; chan >= 0; chan--) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + } + + kfree(cpld_mux_data); +err: + return ret; +} + +static int __delta_i2c_cpld_mux_remove(void) +{ + const struct chip_desc *chip = &chips[cpld_mux_data->type]; + int chan; + + for (chan = 0; chan < chip->nchans; ++chan) { + if (cpld_mux_data->virt_adaps[chan]) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + cpld_mux_data->virt_adaps[chan] = NULL; + } + } + + kfree(cpld_mux_data); + + return 0; +} + +static int __init delta_i2c_cpld_mux_init(void) +{ + return __delta_i2c_cpld_mux_init (); +} + +static void __exit delta_i2c_cpld_mux_exit(void) +{ + __delta_i2c_cpld_mux_remove (); +} + +MODULE_AUTHOR("Dave Hu "); +MODULE_DESCRIPTION("Delta I2C CPLD mux driver"); +MODULE_LICENSE("GPL"); + +module_init(delta_i2c_cpld_mux_init); +module_exit(delta_i2c_cpld_mux_exit); + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/PKG.yml new file mode 100755 index 00000000..0f9fdb5b --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/onlp-platform-any.yml PLATFORM=arm-delta-ag6248c-poe ARCH=armel TOOLCHAIN=arm-linux-gnueabi diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/Makefile new file mode 100755 index 00000000..e7437cb2 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/Makefile @@ -0,0 +1,2 @@ +FILTER=src +include $(ONL)/make/subdirs.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/Makefile new file mode 100755 index 00000000..8e449476 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/Makefile @@ -0,0 +1,44 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +############################################################ +include $(ONL)/make/config.armel.mk + +MODULE := libonlp-arm-delta-ag6248c-poe +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF arm_delta_ag6248c onlplib +DEPENDMODULE_HEADERS := sff + +include $(BUILDER)/dependmodules.mk + +SHAREDLIB := libonlp-arm-delta-ag6248c-poe.so +$(SHAREDLIB)_TARGETS := $(ALL_TARGETS) +include $(BUILDER)/so.mk +.DEFAULT_GOAL := $(SHAREDLIB) + +GLOBAL_CFLAGS += -I$(onlp_BASEDIR)/module/inc +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -fPIC +GLOBAL_LINK_LIBS += -lpthread + +include $(BUILDER)/targets.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/libonlp-arm-delta-ag6248c-poe.mk b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/libonlp-arm-delta-ag6248c-poe.mk new file mode 100755 index 00000000..9edfe87c --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/lib/libonlp-arm-delta-ag6248c-poe.mk @@ -0,0 +1,10 @@ + +############################################################################### +# +# Inclusive Makefile for the libonlp-arm-delta-ag6248c-poe module. +# +# Autogenerated 2016-07-20 18:27:47.344268 +# +############################################################################### +libonlp-arm-delta-ag6248c-poe_BASEDIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST)))) + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/onlpdump/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/onlpdump/Makefile new file mode 100755 index 00000000..3fe979f3 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/onlp/builds/onlpdump/Makefile @@ -0,0 +1,45 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ +include $(ONL)/make/config.armel.mk + +.DEFAULT_GOAL := onlpdump + +MODULE := onlpdump +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF onlp arm_delta_ag6248c onlplib onlp_platform_defaults sff cjson cjson_util timer_wheel OS + +include $(BUILDER)/dependmodules.mk + +BINARY := onlpdump +$(BINARY)_LIBRARIES := $(LIBRARY_TARGETS) +include $(BUILDER)/bin.mk + +GLOBAL_CFLAGS += -DAIM_CONFIG_AIM_MAIN_FUNCTION=onlpdump_main +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MAIN=1 +GLOBAL_LINK_LIBS += -lpthread -lm + +include $(BUILDER)/targets.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/Makefile new file mode 100755 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/PKG.yml new file mode 100755 index 00000000..d8c6ed4a --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-config-platform.yml ARCH=armel VENDOR=delta BASENAME=arm-delta-ag6248c-poe REVISION=r0 diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/lib/arm-delta-ag6248c-poe-r0.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/lib/arm-delta-ag6248c-poe-r0.yml new file mode 100755 index 00000000..ac3ed810 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/lib/arm-delta-ag6248c-poe-r0.yml @@ -0,0 +1,42 @@ +--- + +###################################################################### +# +# platform-config for AG6248C-POE +# +###################################################################### + +arm-delta-ag6248c-poe-r0: + flat_image_tree: + kernel: + <<: *arm-iproc-kernel + dtb: + =: delta_ag6248c.dtb + <<: *arm-iproc-kernel-package + itb: + <<: *arm-itb + + loader: + device: /dev/mtdblock4 + loadaddr: 0x70000000 + nos_bootcmds: *flash_bootcmds + + environment: + - device: /dev/mtd2 + env_offset: 0x00000000 + env_size: 0x00002000 + sector_size: 0x00010000 + + installer: + - ONL-BOOT: + =: 128MiB + format: ubifs + - ONL-CONFIG: + =: 128MiB + format: ubifs + - ONL-IMAGES: + =: 1024MiB + format: ubifs + - ONL-DATA: + =: 2048MiB + format: ubifs diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/python/arm_delta_ag6248c_poe_r0/__init__.py b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/python/arm_delta_ag6248c_poe_r0/__init__.py new file mode 100755 index 00000000..43045aec --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/python/arm_delta_ag6248c_poe_r0/__init__.py @@ -0,0 +1,21 @@ +from onl.platform.base import * +from onl.platform.delta import * + +class OnlPlatform_arm_delta_ag6248c_poe_r0(OnlPlatformDelta,OnlPlatformPortConfig_48x1_2x10): + PLATFORM='arm-delta-ag6248c-poe-r0' + MODEL="AG6248C-POE" + SYS_OBJECT_ID=".6248.1" + + def baseconfig(self): + self.insmod('arm-delta-ag6248c-poe-cpld-mux-1.ko') + self.insmod('arm-delta-ag6248c-poe-cpld-mux-2.ko') + + self.new_i2c_devices( + [ + # initiate lm75 + ('tmp75', 0x49, 0), + ('tmp75', 0x4a, 0), + + ] + ) + return True diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/.gitignore b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/.gitignore new file mode 100644 index 00000000..4d978b36 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/.gitignore @@ -0,0 +1,2 @@ +*x86*64*cel*redstone*xp*.mk +onlpdump.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/PKG.yml new file mode 100755 index 00000000..cb9893f5 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-modules.yml ARCH=armel VENDOR=delta BASENAME=arm-delta-ag6248c KERNELS="onl-kernel-3.2-lts-arm-iproc-all:armel" diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/.gitignore b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/.gitignore new file mode 100755 index 00000000..a813c369 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/.gitignore @@ -0,0 +1,2 @@ +onlpdump.mk +lib diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/Makefile new file mode 100755 index 00000000..465902c8 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/Makefile @@ -0,0 +1,6 @@ +KERNELS := onl-kernel-3.2-lts-arm-iproc-all:armel +KMODULES := $(wildcard *.c) +VENDOR := delta +BASENAME := arm-delta-ag6248c +ARCH := arm +include $(ONL)/make/kmodule.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-1.c b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-1.c new file mode 100755 index 00000000..56d68b13 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-1.c @@ -0,0 +1,242 @@ +/* + * An I2C multiplexer dirver for delta as5812 CPLD + * + * Copyright (C) 2017 Delta Networks, Inc. + * Brandon Chuang + * + * This module supports the delta cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Delta ag7648c CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CTRL_CPLD_BUS 0x0 +#define CTRL_CPLD_I2C_ADDR 0x28 +#define PARENT_CHAN 0x0 +#define NUM_OF_CPLD_CHANS 0x2 + +#define CPLD_CHANNEL_SELECT_REG 0x19 +#define CPLD_CHANNEL_SELECT_MASK 0x3 +#define CPLD_CHANNEL_SELECT_OFFSET 0x0 + +#define CPLD_DESELECT_CHANNEL 0xff + +#define CPLD_MUX_MAX_NCHANS 0x2 +enum cpld_mux_type { + delta_cpld_mux +}; + +struct delta_i2c_cpld_mux { + enum cpld_mux_type type; + struct i2c_adapter *virt_adaps[CPLD_MUX_MAX_NCHANS]; + u8 last_chan; /* last register value */ +}; + +struct chip_desc { + u8 nchans; + u8 deselectChan; +}; + +/* Provide specs for the PCA954x types we know about */ +static const struct chip_desc chips[] = { + [delta_cpld_mux] = { + .nchans = NUM_OF_CPLD_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + } +}; + +static struct delta_i2c_cpld_mux *cpld_mux_data; + +static struct device dump_dev; + +/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() + for this as they will try to lock adapter a second time */ +static int delta_i2c_cpld_mux_reg_write(struct i2c_adapter *adap, + struct i2c_client *client, u8 val) +{ + unsigned long orig_jiffies; + unsigned short flags; + union i2c_smbus_data data; + struct i2c_adapter *ctrl_adap; + int try; + s32 res = -EIO; + u8 reg_val = 0; + + data.byte = val; + flags = 0; + + ctrl_adap = i2c_get_adapter(CTRL_CPLD_BUS); + if (!ctrl_adap) + return res; + + // try to lock it + if (ctrl_adap->algo->smbus_xfer) { + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= ctrl_adap->retries; try++) { + // read first + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_READ, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + + // modify the field we wanted + data.byte &= ~(CPLD_CHANNEL_SELECT_MASK << CPLD_CHANNEL_SELECT_OFFSET); + reg_val |= ((val & CPLD_CHANNEL_SELECT_MASK) << CPLD_CHANNEL_SELECT_OFFSET); + data.byte |= reg_val; + + // modify the register + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_WRITE, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + ctrl_adap->timeout)) + break; + } + } + + return res; +} + +static int delta_i2c_cpld_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (cpld_mux_data->last_chan != regval) { + ret = delta_i2c_cpld_mux_reg_write(NULL, NULL, regval); + cpld_mux_data->last_chan = regval; + } + + return ret; +} + +static int delta_i2c_cpld_mux_deselect_mux(struct i2c_adapter *adap, + void *client, u32 chan) +{ + /* Deselect active channel */ + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; + + return delta_i2c_cpld_mux_reg_write(NULL, NULL, cpld_mux_data->last_chan); +} + +/* + * I2C init/probing/exit functions + */ +static int __delta_i2c_cpld_mux_init(void) +{ + struct i2c_adapter *adap = i2c_get_adapter(PARENT_CHAN); + int chan=0; + int ret = -ENODEV; + + memset (&dump_dev, 0, sizeof(dump_dev)); + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto err; + + if (!adap) + goto err; + + cpld_mux_data = kzalloc(sizeof(struct delta_i2c_cpld_mux), GFP_KERNEL); + if (!cpld_mux_data) { + ret = -ENOMEM; + goto err; + } + + cpld_mux_data->type = delta_cpld_mux; + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; /* force the first selection */ + + /* Now create an adapter for each channel */ + for (chan = 0; chan < NUM_OF_CPLD_CHANS; chan++) { + cpld_mux_data->virt_adaps[chan] = i2c_add_mux_adapter(adap, &dump_dev, NULL, 0, + chan, + delta_i2c_cpld_mux_select_chan, + delta_i2c_cpld_mux_deselect_mux); + + if (cpld_mux_data->virt_adaps[chan] == NULL) { + ret = -ENODEV; + printk("failed to register multiplexed adapter %d, parent %d\n", chan, PARENT_CHAN); + goto virt_reg_failed; + } + } + + printk("registered %d multiplexed busses for I2C mux bus %d\n", + chan, PARENT_CHAN); + + return 0; + +virt_reg_failed: + for (chan--; chan >= 0; chan--) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + } + + kfree(cpld_mux_data); +err: + return ret; +} + +static int __delta_i2c_cpld_mux_remove(void) +{ + const struct chip_desc *chip = &chips[cpld_mux_data->type]; + int chan; + + for (chan = 0; chan < chip->nchans; ++chan) { + if (cpld_mux_data->virt_adaps[chan]) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + cpld_mux_data->virt_adaps[chan] = NULL; + } + } + + kfree(cpld_mux_data); + + return 0; +} + +static int __init delta_i2c_cpld_mux_init(void) +{ + return __delta_i2c_cpld_mux_init (); +} + +static void __exit delta_i2c_cpld_mux_exit(void) +{ + __delta_i2c_cpld_mux_remove (); +} + +MODULE_AUTHOR("Dave Hu "); +MODULE_DESCRIPTION("Delta I2C CPLD mux driver"); +MODULE_LICENSE("GPL"); + +module_init(delta_i2c_cpld_mux_init); +module_exit(delta_i2c_cpld_mux_exit); + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-2.c b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-2.c new file mode 100755 index 00000000..12b5fb38 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/modules/builds/arm-delta-ag6248c-cpld-mux-2.c @@ -0,0 +1,243 @@ +/* + * An I2C multiplexer dirver for delta as5812 CPLD + * + * Copyright (C) 2017 Delta Networks, Inc. + * Brandon Chuang + * + * This module supports the delta cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Delta ag7648c CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CTRL_CPLD_BUS 0x0 +#define CTRL_CPLD_I2C_ADDR 0x28 +#define PARENT_CHAN 0x1 +#define NUM_OF_CPLD_CHANS 0x2 + +#define CPLD_CHANNEL_SELECT_REG 0x19 +#define CPLD_CHANNEL_SELECT_MASK 0x3 +#define CPLD_CHANNEL_SELECT_OFFSET 0x5 + +#define CPLD_DESELECT_CHANNEL 0xff + +#define CPLD_MUX_MAX_NCHANS 0x2 +enum cpld_mux_type { + delta_cpld_mux +}; + +struct delta_i2c_cpld_mux { + enum cpld_mux_type type; + struct i2c_adapter *virt_adaps[CPLD_MUX_MAX_NCHANS]; + u8 last_chan; /* last register value */ +}; + +struct chip_desc { + u8 nchans; + u8 deselectChan; +}; + +/* Provide specs for the PCA954x types we know about */ +static const struct chip_desc chips[] = { + [delta_cpld_mux] = { + .nchans = NUM_OF_CPLD_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + } +}; + +static struct delta_i2c_cpld_mux *cpld_mux_data; + +static struct device dump_dev; + +/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() + for this as they will try to lock adapter a second time */ +static int delta_i2c_cpld_mux_reg_write(struct i2c_adapter *adap, + struct i2c_client *client, u8 val) +{ + unsigned long orig_jiffies; + unsigned short flags; + union i2c_smbus_data data; + struct i2c_adapter *ctrl_adap; + int try; + s32 res = -EIO; + u8 reg_val = 0; + + data.byte = val; + flags = 0; + + ctrl_adap = i2c_get_adapter(CTRL_CPLD_BUS); + if (!ctrl_adap) + return res; + + + // try to lock it + if (ctrl_adap->algo->smbus_xfer) { + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= ctrl_adap->retries; try++) { + // read first + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_READ, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res && res != -EAGAIN) + break; + + // modify the field we wanted + data.byte &= ~(CPLD_CHANNEL_SELECT_MASK << CPLD_CHANNEL_SELECT_OFFSET); + reg_val |= ((val & CPLD_CHANNEL_SELECT_MASK) << CPLD_CHANNEL_SELECT_OFFSET); + data.byte |= reg_val; + + // modify the register + res = ctrl_adap->algo->smbus_xfer(ctrl_adap, CTRL_CPLD_I2C_ADDR, flags, + I2C_SMBUS_WRITE, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + ctrl_adap->timeout)) + break; + } + } + + return res; +} + +static int delta_i2c_cpld_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (cpld_mux_data->last_chan != regval) { + ret = delta_i2c_cpld_mux_reg_write(NULL, NULL, regval); + cpld_mux_data->last_chan = regval; + } + + return ret; +} + +static int delta_i2c_cpld_mux_deselect_mux(struct i2c_adapter *adap, + void *client, u32 chan) +{ + /* Deselect active channel */ + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; + + return delta_i2c_cpld_mux_reg_write(NULL, NULL, cpld_mux_data->last_chan); +} + +/* + * I2C init/probing/exit functions + */ +static int __delta_i2c_cpld_mux_init(void) +{ + struct i2c_adapter *adap = i2c_get_adapter(PARENT_CHAN); + int chan=0; + int ret = -ENODEV; + + memset (&dump_dev, 0, sizeof(dump_dev)); + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto err; + + if (!adap) + goto err; + + cpld_mux_data = kzalloc(sizeof(struct delta_i2c_cpld_mux), GFP_KERNEL); + if (!cpld_mux_data) { + ret = -ENOMEM; + goto err; + } + + cpld_mux_data->type = delta_cpld_mux; + cpld_mux_data->last_chan = chips[cpld_mux_data->type].deselectChan; /* force the first selection */ + + /* Now create an adapter for each channel */ + for (chan = 0; chan < NUM_OF_CPLD_CHANS; chan++) { + cpld_mux_data->virt_adaps[chan] = i2c_add_mux_adapter(adap, &dump_dev, NULL, 0, + chan, + delta_i2c_cpld_mux_select_chan, + delta_i2c_cpld_mux_deselect_mux); + + if (cpld_mux_data->virt_adaps[chan] == NULL) { + ret = -ENODEV; + printk("failed to register multiplexed adapter %d, parent %d\n", chan, PARENT_CHAN); + goto virt_reg_failed; + } + } + + printk("registered %d multiplexed busses for I2C mux bus %d\n", + chan, PARENT_CHAN); + + return 0; + +virt_reg_failed: + for (chan--; chan >= 0; chan--) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + } + + kfree(cpld_mux_data); +err: + return ret; +} + +static int __delta_i2c_cpld_mux_remove(void) +{ + const struct chip_desc *chip = &chips[cpld_mux_data->type]; + int chan; + + for (chan = 0; chan < chip->nchans; ++chan) { + if (cpld_mux_data->virt_adaps[chan]) { + i2c_del_mux_adapter(cpld_mux_data->virt_adaps[chan]); + cpld_mux_data->virt_adaps[chan] = NULL; + } + } + + kfree(cpld_mux_data); + + return 0; +} + +static int __init delta_i2c_cpld_mux_init(void) +{ + return __delta_i2c_cpld_mux_init (); +} + +static void __exit delta_i2c_cpld_mux_exit(void) +{ + __delta_i2c_cpld_mux_remove (); +} + +MODULE_AUTHOR("Dave Hu "); +MODULE_DESCRIPTION("Delta I2C CPLD mux driver"); +MODULE_LICENSE("GPL"); + +module_init(delta_i2c_cpld_mux_init); +module_exit(delta_i2c_cpld_mux_exit); + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/PKG.yml new file mode 100644 index 00000000..63b56dc7 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/onlp-platform-any.yml PLATFORM=arm-delta-ag6248c ARCH=armel TOOLCHAIN=arm-linux-gnueabi diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/Makefile new file mode 100644 index 00000000..e7437cb2 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/Makefile @@ -0,0 +1,2 @@ +FILTER=src +include $(ONL)/make/subdirs.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/Makefile new file mode 100644 index 00000000..46fdfee8 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/Makefile @@ -0,0 +1,44 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +############################################################ +include $(ONL)/make/config.armel.mk + +MODULE := libonlp-arm-delta-ag6248c +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF arm_delta_ag6248c onlplib +DEPENDMODULE_HEADERS := sff + +include $(BUILDER)/dependmodules.mk + +SHAREDLIB := libonlp-arm-delta-ag6248c.so +$(SHAREDLIB)_TARGETS := $(ALL_TARGETS) +include $(BUILDER)/so.mk +.DEFAULT_GOAL := $(SHAREDLIB) + +GLOBAL_CFLAGS += -I$(onlp_BASEDIR)/module/inc +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -fPIC +GLOBAL_LINK_LIBS += -lpthread + +include $(BUILDER)/targets.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/libonlp-arm-delta-ag6248c.mk b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/libonlp-arm-delta-ag6248c.mk new file mode 100644 index 00000000..9cf2a027 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/lib/libonlp-arm-delta-ag6248c.mk @@ -0,0 +1,10 @@ + +############################################################################### +# +# Inclusive Makefile for the libonlp-arm-delta-ag6248c module. +# +# Autogenerated 2016-07-20 18:27:47.344268 +# +############################################################################### +libonlp-arm-delta-ag6248c_BASEDIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST)))) + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/onlpdump/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/onlpdump/Makefile new file mode 100644 index 00000000..3fe979f3 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/onlp/builds/onlpdump/Makefile @@ -0,0 +1,45 @@ +############################################################ +# +# +# Copyright 2014 BigSwitch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ +include $(ONL)/make/config.armel.mk + +.DEFAULT_GOAL := onlpdump + +MODULE := onlpdump +include $(BUILDER)/standardinit.mk + +DEPENDMODULES := AIM IOF onlp arm_delta_ag6248c onlplib onlp_platform_defaults sff cjson cjson_util timer_wheel OS + +include $(BUILDER)/dependmodules.mk + +BINARY := onlpdump +$(BINARY)_LIBRARIES := $(LIBRARY_TARGETS) +include $(BUILDER)/bin.mk + +GLOBAL_CFLAGS += -DAIM_CONFIG_AIM_MAIN_FUNCTION=onlpdump_main +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MODULES_INIT=1 +GLOBAL_CFLAGS += -DAIM_CONFIG_INCLUDE_MAIN=1 +GLOBAL_LINK_LIBS += -lpthread -lm + +include $(BUILDER)/targets.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/PKG.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/PKG.yml new file mode 100644 index 00000000..16ff5c28 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/platform-config-platform.yml ARCH=armel VENDOR=delta BASENAME=arm-delta-ag6248c REVISION=r0 diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/lib/arm-delta-ag6248c-r0.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/lib/arm-delta-ag6248c-r0.yml new file mode 100644 index 00000000..ba1cbec5 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/lib/arm-delta-ag6248c-r0.yml @@ -0,0 +1,43 @@ +--- + +###################################################################### +# +# platform-config for AG6248C +# +###################################################################### + +arm-delta-ag6248c-r0: + flat_image_tree: + kernel: + <<: *arm-iproc-kernel + dtb: + =: delta_ag6248c.dtb + <<: *arm-iproc-kernel-package + itb: + <<: *arm-itb + + loader: + device: /dev/mtdblock4 + loadaddr: 0x70000000 + nos_bootcmds: *flash_bootcmds + + environment: + - device: /dev/mtd2 + env_offset: 0x00000000 + env_size: 0x00002000 + sector_size: 0x00010000 + + installer: + - ONL-BOOT: + =: 128MiB + format: ubifs + - ONL-CONFIG: + =: 128MiB + format: ubifs + - ONL-IMAGES: + =: 1024MiB + format: ubifs + - ONL-DATA: + =: 2048MiB + format: ubifs + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/python/arm_delta_ag6248c_r0/__init__.py b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/python/arm_delta_ag6248c_r0/__init__.py new file mode 100755 index 00000000..7d7b97a1 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c/platform-config/r0/src/python/arm_delta_ag6248c_r0/__init__.py @@ -0,0 +1,23 @@ +from onl.platform.base import * +from onl.platform.delta import * + +class OnlPlatform_arm_delta_ag6248c_r0(OnlPlatformDelta,OnlPlatformPortConfig_48x1_2x10): + PLATFORM='arm-delta-ag6248c-r0' + MODEL="AG6248C" + SYS_OBJECT_ID=".6248.2" + + def baseconfig(self): + self.insmod('arm-delta-ag6248c-cpld-mux-1.ko') + self.insmod('arm-delta-ag6248c-cpld-mux-2.ko') + + self.new_i2c_devices( + [ + # initiate lm75 + ('tmp75', 0x49, 0), + ('tmp75', 0x4a, 0), + + + + ] + ) + return True diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.gitignore b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.gitignore new file mode 100644 index 00000000..82fb1eaf --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.gitignore @@ -0,0 +1,2 @@ +/arm_delta_ag6248c_poe.mk +/doc diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.module b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.module new file mode 100644 index 00000000..1e18e32c --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/.module @@ -0,0 +1 @@ +name: arm_delta_ag6248c diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/Makefile new file mode 100644 index 00000000..bfc40983 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/Makefile @@ -0,0 +1,28 @@ +############################################################ +# +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ +include $(ONL)/make/config.mk +MODULE := arm_delta_ag6248c +AUTOMODULE := arm_delta_ag6248c +include $(BUILDER)/definemodule.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.doxy b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.doxy new file mode 100644 index 00000000..b13fcf5d --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.doxy @@ -0,0 +1,1869 @@ +# Doxyfile 1.8.3.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = "arm_delta_ag6248c" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = "Open Network Platform Linux Example Implementation." + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. + +EXTENSION_MAPPING = + +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a percent sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES (the +# default) will make doxygen replace the get and set methods by a property in +# the documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +SYMBOL_CACHE_SIZE = 0 + +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if section-label ... \endif +# and \cond section-label ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. Do not use +# file names with spaces, bibtex cannot handle them. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = module/inc + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page (index.html). +# This can be useful if you have a project on for instance GitHub and want reuse +# the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C, C++ and Fortran comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# SVG. The default value is HTML-CSS, which is slower, but has the best +# compatibility. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. +# There are two flavours of web server based search depending on the +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for +# searching and an index file used by the script. When EXTERNAL_SEARCH is +# enabled the indexing and searching needs to be provided by external tools. +# See the manual for details. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain +# the search results. Doxygen ships with an example indexer (doxyindexer) and +# search engine (doxysearch.cgi) which are based on the open source search engine +# library Xapian. See the manual for configuration details. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will returned the search results when EXTERNAL_SEARCH is enabled. +# Doxygen ships with an example search engine (doxysearch) which is based on +# the open source search engine library Xapian. See the manual for configuration +# details. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id +# of to a relative location where the documentation can be found. +# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ... + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50 percent before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.mk b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.mk new file mode 100644 index 00000000..42ac4368 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/arm_delta_ag6248c.mk @@ -0,0 +1,13 @@ + +############################################################################### +# +# Inclusive Makefile for the arm_delta_ag6248c module. +# +# Autogenerated 2017-02-16 14:19:33.628446 +# +############################################################################### +arm_delta_ag6248c_BASEDIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST)))) +include $(arm_delta_ag6248c_BASEDIR)module/make.mk +include $(arm_delta_ag6248c_BASEDIR)module/auto/make.mk +include $(arm_delta_ag6248c_BASEDIR)module/src/make.mk + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/arm_delta_ag6248c.yml b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/arm_delta_ag6248c.yml new file mode 100644 index 00000000..80f1a97d --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/arm_delta_ag6248c.yml @@ -0,0 +1,67 @@ +############################################################ +# +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +############################################################ + +cdefs: &cdefs +- ONLPSIM_CONFIG_INCLUDE_LOGGING: + doc: "Include or exclude logging." + default: 1 +- ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT: + doc: "Default enabled log options." + default: AIM_LOG_OPTIONS_DEFAULT +- ONLPSIM_CONFIG_LOG_BITS_DEFAULT: + doc: "Default enabled log bits." + default: AIM_LOG_BITS_DEFAULT +- ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT: + doc: "Default enabled custom log bits." + default: 0 +- ONLPSIM_CONFIG_PORTING_STDLIB: + doc: "Default all porting macros to use the C standard libraries." + default: 1 +- ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS: + doc: "Include standard library headers for stdlib porting macros." + default: ONLPSIM_CONFIG_PORTING_STDLIB +- ONLPSIM_CONFIG_INCLUDE_UCLI: + doc: "Include generic uCli support." + default: 0 +- ONLPSIM_CONFIG_SFP_COUNT: + doc: "SFP Count." + default: 0 + +definitions: + cdefs: + ONLPSIM_CONFIG_HEADER: + defs: *cdefs + basename: arm_delta_ag6248c_config + + portingmacro: + ONLPSIM: + macros: + - malloc + - free + - memset + - memcpy + - strncpy + - vsnprintf + - snprintf + - strlen diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/make.mk b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/make.mk new file mode 100644 index 00000000..57889792 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/auto/make.mk @@ -0,0 +1,28 @@ +############################################################ +# +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +############################################################ + +arm_delta_ag6248c_AUTO_DEFS := module/auto/arm_delta_ag6248c.yml +arm_delta_ag6248c_AUTO_DIRS := module/inc/arm_delta_ag6248c module/src +include $(BUILDER)/auto.mk + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c.x b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c.x new file mode 100644 index 00000000..f15500cc --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c.x @@ -0,0 +1,34 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +/* <--auto.start.xmacro(ALL).define> */ +/* */ + +/* <--auto.start.xenum(ALL).define> */ +/* */ + + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_config.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_config.h new file mode 100644 index 00000000..68664185 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_config.h @@ -0,0 +1,162 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +/**************************************************************************//** + * + * @file + * @brief arm_delta_ag6248c Configuration Header + * + * @addtogroup arm_delta_ag6248c-config + * @{ + * + *****************************************************************************/ +#ifndef __ONLPSIM_CONFIG_H__ +#define __ONLPSIM_CONFIG_H__ + +#ifdef GLOBAL_INCLUDE_CUSTOM_CONFIG +#include +#endif +#ifdef ONLPSIM_INCLUDE_CUSTOM_CONFIG +#include +#endif + +/* */ +#include +/** + * ONLPSIM_CONFIG_INCLUDE_LOGGING + * + * Include or exclude logging. */ + + +#ifndef ONLPSIM_CONFIG_INCLUDE_LOGGING +#define ONLPSIM_CONFIG_INCLUDE_LOGGING 1 +#endif + +/** + * ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT + * + * Default enabled log options. */ + + +#ifndef ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT +#define ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT AIM_LOG_OPTIONS_DEFAULT +#endif + +/** + * ONLPSIM_CONFIG_LOG_BITS_DEFAULT + * + * Default enabled log bits. */ + + +#ifndef ONLPSIM_CONFIG_LOG_BITS_DEFAULT +#define ONLPSIM_CONFIG_LOG_BITS_DEFAULT AIM_LOG_BITS_DEFAULT +#endif + +/** + * ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT + * + * Default enabled custom log bits. */ + + +#ifndef ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT +#define ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT 0 +#endif + +/** + * ONLPSIM_CONFIG_PORTING_STDLIB + * + * Default all porting macros to use the C standard libraries. */ + + +#ifndef ONLPSIM_CONFIG_PORTING_STDLIB +#define ONLPSIM_CONFIG_PORTING_STDLIB 1 +#endif + +/** + * ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS + * + * Include standard library headers for stdlib porting macros. */ + + +#ifndef ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS +#define ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS ONLPSIM_CONFIG_PORTING_STDLIB +#endif + +/** + * ONLPSIM_CONFIG_INCLUDE_UCLI + * + * Include generic uCli support. */ + + +#ifndef ONLPSIM_CONFIG_INCLUDE_UCLI +#define ONLPSIM_CONFIG_INCLUDE_UCLI 0 +#endif + +/** + * ONLPSIM_CONFIG_SFP_COUNT + * + * SFP Count. */ + + +#ifndef ONLPSIM_CONFIG_SFP_COUNT +#define ONLPSIM_CONFIG_SFP_COUNT 0 +#endif + + + +/** + * All compile time options can be queried or displayed + */ + +/** Configuration settings structure. */ +typedef struct arm_delta_ag6248c_config_settings_s { + /** name */ + const char* name; + /** value */ + const char* value; +} arm_delta_ag6248c_config_settings_t; + +/** Configuration settings table. */ +/** arm_delta_ag6248c_config_settings table. */ +extern arm_delta_ag6248c_config_settings_t arm_delta_ag6248c_config_settings[]; + +/** + * @brief Lookup a configuration setting. + * @param setting The name of the configuration option to lookup. + */ +const char* arm_delta_ag6248c_config_lookup(const char* setting); + +/** + * @brief Show the compile-time configuration. + * @param pvs The output stream. + */ +int arm_delta_ag6248c_config_show(struct aim_pvs_s* pvs); + +/* */ + +#include "arm_delta_ag6248c_porting.h" + +#endif /* __ONLPSIM_CONFIG_H__ */ +/* @} */ diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_dox.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_dox.h new file mode 100644 index 00000000..20f312ed --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_dox.h @@ -0,0 +1,51 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +/********************************************************//** + * + * arm_delta_ag6248c Doxygen Header + * + ***********************************************************/ +#ifndef __ONLPSIM_DOX_H__ +#define __ONLPSIM_DOX_H__ + +/** + * @defgroup arm_delta_ag6248c arm_delta_ag6248c - onlpsim Description + * + +The documentation overview for this module should go here. + + * + * @{ + * + * @defgroup arm_delta_ag6248c-arm_delta_ag6248c Public Interface + * @defgroup arm_delta_ag6248c-config Compile Time Configuration + * @defgroup arm_delta_ag6248c-porting Porting Macros + * + * @} + * + */ + +#endif /* __ONLPSIM_DOX_H__ */ diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_porting.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_porting.h new file mode 100644 index 00000000..19853401 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/inc/arm_delta_ag6248c/arm_delta_ag6248c_porting.h @@ -0,0 +1,132 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +/********************************************************//** + * + * @file + * @brief arm_delta_ag6248c Porting Macros. + * + * @addtogroup arm_delta_ag6248c-porting + * @{ + * + ***********************************************************/ +#ifndef __ONLPSIM_PORTING_H__ +#define __ONLPSIM_PORTING_H__ + + +/* */ +#if ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS == 1 +#include +#include +#include +#include +#include +#endif + +#ifndef ONLPSIM_MALLOC + #if defined(GLOBAL_MALLOC) + #define ONLPSIM_MALLOC GLOBAL_MALLOC + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_MALLOC malloc + #else + #error The macro ONLPSIM_MALLOC is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_FREE + #if defined(GLOBAL_FREE) + #define ONLPSIM_FREE GLOBAL_FREE + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_FREE free + #else + #error The macro ONLPSIM_FREE is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_MEMSET + #if defined(GLOBAL_MEMSET) + #define ONLPSIM_MEMSET GLOBAL_MEMSET + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_MEMSET memset + #else + #error The macro ONLPSIM_MEMSET is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_MEMCPY + #if defined(GLOBAL_MEMCPY) + #define ONLPSIM_MEMCPY GLOBAL_MEMCPY + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_MEMCPY memcpy + #else + #error The macro ONLPSIM_MEMCPY is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_STRNCPY + #if defined(GLOBAL_STRNCPY) + #define ONLPSIM_STRNCPY GLOBAL_STRNCPY + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_STRNCPY strncpy + #else + #error The macro ONLPSIM_STRNCPY is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_VSNPRINTF + #if defined(GLOBAL_VSNPRINTF) + #define ONLPSIM_VSNPRINTF GLOBAL_VSNPRINTF + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_VSNPRINTF vsnprintf + #else + #error The macro ONLPSIM_VSNPRINTF is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_SNPRINTF + #if defined(GLOBAL_SNPRINTF) + #define ONLPSIM_SNPRINTF GLOBAL_SNPRINTF + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_SNPRINTF snprintf + #else + #error The macro ONLPSIM_SNPRINTF is required but cannot be defined. + #endif +#endif + +#ifndef ONLPSIM_STRLEN + #if defined(GLOBAL_STRLEN) + #define ONLPSIM_STRLEN GLOBAL_STRLEN + #elif ONLPSIM_CONFIG_PORTING_STDLIB == 1 + #define ONLPSIM_STRLEN strlen + #else + #error The macro ONLPSIM_STRLEN is required but cannot be defined. + #endif +#endif + +/* */ + + +#endif /* __ONLPSIM_PORTING_H__ */ +/* @} */ diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/make.mk b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/make.mk new file mode 100644 index 00000000..29f7a9f3 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/make.mk @@ -0,0 +1,29 @@ +############################################################ +# +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ +THIS_DIR := $(dir $(lastword $(MAKEFILE_LIST))) +arm_delta_ag6248c_INCLUDES := -I $(THIS_DIR)inc +arm_delta_ag6248c_INTERNAL_INCLUDES := -I $(THIS_DIR)src +arm_delta_ag6248c_DEPENDMODULE_ENTRIES := init:arm_delta_ag6248c ucli:arm_delta_ag6248c + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/Makefile b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/Makefile new file mode 100644 index 00000000..94aa2ec9 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/Makefile @@ -0,0 +1,30 @@ +############################################################ +# +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# Local source generation targets. +# +############################################################ + +include ../../../../init.mk + +ucli: + $(SUBMODULE_BIGCODE)/tools/uclihandlers.py arm_delta_ag6248c_ucli.c + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_config.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_config.c new file mode 100644 index 00000000..6447135c --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_config.c @@ -0,0 +1,101 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +/* */ +#define __arm_delta_ag6248c_config_STRINGIFY_NAME(_x) #_x +#define __arm_delta_ag6248c_config_STRINGIFY_VALUE(_x) __arm_delta_ag6248c_config_STRINGIFY_NAME(_x) +arm_delta_ag6248c_config_settings_t arm_delta_ag6248c_config_settings[] = +{ +#ifdef ONLPSIM_CONFIG_INCLUDE_LOGGING + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_INCLUDE_LOGGING), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_INCLUDE_LOGGING) }, +#else +{ ONLPSIM_CONFIG_INCLUDE_LOGGING(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT) }, +#else +{ ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_LOG_BITS_DEFAULT + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_LOG_BITS_DEFAULT), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_LOG_BITS_DEFAULT) }, +#else +{ ONLPSIM_CONFIG_LOG_BITS_DEFAULT(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT) }, +#else +{ ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_PORTING_STDLIB + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_PORTING_STDLIB), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_PORTING_STDLIB) }, +#else +{ ONLPSIM_CONFIG_PORTING_STDLIB(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS) }, +#else +{ ONLPSIM_CONFIG_PORTING_INCLUDE_STDLIB_HEADERS(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_INCLUDE_UCLI + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_INCLUDE_UCLI), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_INCLUDE_UCLI) }, +#else +{ ONLPSIM_CONFIG_INCLUDE_UCLI(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif +#ifdef ONLPSIM_CONFIG_SFP_COUNT + { __arm_delta_ag6248c_config_STRINGIFY_NAME(ONLPSIM_CONFIG_SFP_COUNT), __arm_delta_ag6248c_config_STRINGIFY_VALUE(ONLPSIM_CONFIG_SFP_COUNT) }, +#else +{ ONLPSIM_CONFIG_SFP_COUNT(__arm_delta_ag6248c_config_STRINGIFY_NAME), "__undefined__" }, +#endif + { NULL, NULL } +}; +#undef __arm_delta_ag6248c_config_STRINGIFY_VALUE +#undef __arm_delta_ag6248c_config_STRINGIFY_NAME + +const char* +arm_delta_ag6248c_config_lookup(const char* setting) +{ + int i; + for(i = 0; arm_delta_ag6248c_config_settings[i].name; i++) { + if(strcmp(arm_delta_ag6248c_config_settings[i].name, setting)) { + return arm_delta_ag6248c_config_settings[i].value; + } + } + return NULL; +} + +int +arm_delta_ag6248c_config_show(struct aim_pvs_s* pvs) +{ + int i; + for(i = 0; arm_delta_ag6248c_config_settings[i].name; i++) { + aim_printf(pvs, "%s = %s\n", arm_delta_ag6248c_config_settings[i].name, arm_delta_ag6248c_config_settings[i].value); + } + return i; +} + +/* */ + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_enums.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_enums.c new file mode 100644 index 00000000..2a14c2cc --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_enums.c @@ -0,0 +1,30 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +/* <--auto.start.enum(ALL).source> */ +/* */ + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_int.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_int.h new file mode 100644 index 00000000..8dfd2c7c --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_int.h @@ -0,0 +1,32 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#ifndef __ONLPSIM_INT_H__ +#define __ONLPSIM_INT_H__ + +#include + + +#endif /* __ONLPSIM_INT_H__ */ diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.c new file mode 100644 index 00000000..1941f294 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.c @@ -0,0 +1,38 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +#include "arm_delta_ag6248c_log.h" +/* + * arm_delta_ag6248c log struct. + */ +AIM_LOG_STRUCT_DEFINE( + ONLPSIM_CONFIG_LOG_OPTIONS_DEFAULT, + ONLPSIM_CONFIG_LOG_BITS_DEFAULT, + NULL, /* Custom log map */ + ONLPSIM_CONFIG_LOG_CUSTOM_BITS_DEFAULT + ); + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.h new file mode 100644 index 00000000..13d00bc5 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_log.h @@ -0,0 +1,32 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#ifndef __ONLPSIM_LOG_H__ +#define __ONLPSIM_LOG_H__ + +#define AIM_LOG_MODULE_NAME arm_delta_ag6248c +#include + +#endif /* __ONLPSIM_LOG_H__ */ diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_module.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_module.c new file mode 100644 index 00000000..fdb080f0 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_module.c @@ -0,0 +1,44 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +#include "arm_delta_ag6248c_log.h" + +static int +datatypes_init__(void) +{ +#define ONLPSIM_ENUMERATION_ENTRY(_enum_name, _desc) AIM_DATATYPE_MAP_REGISTER(_enum_name, _enum_name##_map, _desc, AIM_LOG_INTERNAL); +#include + return 0; +} + +void __arm_delta_ag6248c_module_init__(void) +{ + AIM_LOG_STRUCT_REGISTER(); + datatypes_init__(); +} + +int __onlp_platform_version__ = 1; diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_ucli.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_ucli.c new file mode 100644 index 00000000..4dbeeed0 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_ag6248c_ucli.c @@ -0,0 +1,82 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ + +#include + +#if ONLPSIM_CONFIG_INCLUDE_UCLI == 1 + +#include +#include +#include + +static ucli_status_t +arm_delta_ag6248c_ucli_ucli__config__(ucli_context_t* uc) +{ + UCLI_HANDLER_MACRO_MODULE_CONFIG(arm_delta_ag6248c) +} + +/* */ +/****************************************************************************** + * + * These handler table(s) were autogenerated from the symbols in this + * source file. + * + *****************************************************************************/ +static ucli_command_handler_f arm_delta_ag6248c_ucli_ucli_handlers__[] = +{ + arm_delta_ag6248c_ucli_ucli__config__, + NULL +}; +/******************************************************************************/ +/* */ + +static ucli_module_t +arm_delta_ag6248c_ucli_module__ = + { + "arm_delta_ag6248c_ucli", + NULL, + arm_delta_ag6248c_ucli_ucli_handlers__, + NULL, + NULL, + }; + +ucli_node_t* +arm_delta_ag6248c_ucli_node_create(void) +{ + ucli_node_t* n; + ucli_module_init(&arm_delta_ag6248c_ucli_module__); + n = ucli_node_create("arm_delta_ag6248c", NULL, &arm_delta_ag6248c_ucli_module__); + ucli_node_subnode_add(n, ucli_module_log_node_create("arm_delta_ag6248c")); + return n; +} + +#else +void* +arm_delta_ag6248c_ucli_node_create(void) +{ + return NULL; +} +#endif + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.c new file mode 100755 index 00000000..a7a83e0e --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.c @@ -0,0 +1,141 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "arm_delta_ag6248c_log.h" +#include "arm_delta_i2c.h" +#include + +struct i2c_device_info i2c_device_list[]={ + {"RTC",0X0,0X68}, + {"TMP1_CLOSE_TO_MAC",0X0,0X49}, + {"TMP2_CLOSE_TO_PHY",0X0,0X4a}, + {"CPLD",0X0,0X28}, + {"FAN_ON_BOARD",0X1,0X2C}, + {"CURT_MONTOR",0X1,0X40}, + {"SFP1",0X2,0X50}, + {"SFP2",0X3,0X50}, +// ------------------------- + {"PSU1_PMBUS",0X4,0X58}, + {"PSU2_PMBUS",0X5,0X59}, + {"PSU1_EEPROM",0X4,0X50}, + {"PSU2_EEPROM",0X5,0X51}, +// ------------------------- + {"PSU1_PMBUS_POE",0X4,0X58}, + {"PSU2_PMBUS_POE",0X5,0X58}, + {"PSU1_EEPROM_POE",0X4,0X52}, + {"PSU2_EEPROM_POE",0X5,0X52}, + {NULL, -1,-1}, +}; + + +uint32_t i2c_flag=ONLP_I2C_F_FORCE; + + +i2c_device_info_t *i2c_dev_find_by_name (char *name) +{ + i2c_device_info_t *i2c_dev = i2c_device_list; + + if (name == NULL) return NULL; + + while (i2c_dev->name) { + if (strcmp (name, i2c_dev->name) == 0) break; + ++ i2c_dev; + } + if (i2c_dev->name == NULL) return NULL; + + return i2c_dev; +} + +int i2c_devname_read_byte (char *name, int reg) +{ + int ret=-1; + i2c_device_info_t *i2c_dev = i2c_dev_find_by_name (name); + + if(i2c_dev==NULL) return -1; + + ret=onlp_i2c_readb (i2c_dev->i2cbus, i2c_dev->addr, reg, i2c_flag); + + return ret; +} + +int i2c_devname_write_byte (char *name, int reg, int value) +{ + int ret=-1; + i2c_device_info_t *i2c_dev = i2c_dev_find_by_name (name); + + if(i2c_dev==NULL) return -1; + + ret=onlp_i2c_writeb (i2c_dev->i2cbus, i2c_dev->addr, reg, value, i2c_flag); + + + return ret; +} + +int i2c_devname_read_word (char *name, int reg) +{ + int ret=-1; + i2c_device_info_t *i2c_dev = i2c_dev_find_by_name (name); + + if(i2c_dev==NULL) return -1; + + ret=onlp_i2c_readw (i2c_dev->i2cbus, i2c_dev->addr, reg, i2c_flag); + + return ret; +} + +int i2c_devname_write_word (char *name, int reg, int value) +{ + int ret=-1; + i2c_device_info_t *i2c_dev = i2c_dev_find_by_name (name); + + if(i2c_dev==NULL) return -1; + + ret=onlp_i2c_writew (i2c_dev->i2cbus, i2c_dev->addr, reg, value, i2c_flag); + + return ret; +} + +int i2c_devname_read_block (char *name, int reg, uint8_t *buff, int buff_size) +{ + int ret = -1; + + i2c_device_info_t *i2c_dev = i2c_dev_find_by_name (name); + + if(i2c_dev==NULL) return -1; + + ret = onlp_i2c_block_read (i2c_dev->i2cbus, i2c_dev->addr, reg, buff_size, buff, i2c_flag); + + return ret; + +} + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.h new file mode 100755 index 00000000..76c35cbb --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/arm_delta_i2c.h @@ -0,0 +1,54 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************/ +/* the i2c struct header*/ + +#ifndef __ARM_DELTA_I2C_H__ +#define __ARM_DELTA_I2C_H__ + +#include "arm_delta_ag6248c_log.h" + +struct i2c_device_info { + /*i2c device name*/ + char *name; + char i2cbus; + char addr; +}; + + +typedef struct i2c_device_info i2c_device_info_t; + +extern struct i2c_device_info i2c_device_list[]; + + +extern int i2c_devname_read_byte(char *name, int reg); + +extern int i2c_devname_write_byte(char *name, int reg, int value); + + +extern int i2c_devname_read_word(char *name, int reg); + +extern int i2c_devname_write_word(char *name, int reg, int value); + + +extern int i2c_devname_read_block (char *name, int reg, uint8_t *buff, int buff_size); + +#endif diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/fani.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/fani.c new file mode 100755 index 00000000..b0c16526 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/fani.c @@ -0,0 +1,470 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * Fan Platform Implementation Defaults. + * + ***********************************************************/ +#include +#include +#include +#include "platform_lib.h" +#include "arm_delta_ag6248c_int.h" +#include "arm_delta_i2c.h" +#include + +#define MAX_FAN_SPEED 12000 +#define MAX_PSU_FAN_SPEED 23000 + +#define FILE_NAME_LEN 80 + +/* The MAX6639 registers, valid channel numbers: 0, 1 */ +#define MAX6639_REG_STATUS 0x02 +#define MAX6639_REG_FAN_CONFIG1(ch) (0x10 + 4*(ch-1)) +#define MAX6639_REG_FAN_CNT(ch) (0x20 + (ch-1)) +#define MAX6639_REG_TARGET_CNT(ch) (0x22 + (ch-1)) + +/*define the reg bit mask*/ +#define MAX6639_REG_FAN_STATUS_BIT(ch) (0X02>>(ch-1)) +#define MAX6639_FAN_CONFIG1_RPM_RANGE 0x03 +#define MAX6639_FAN_PRESENT_REG (0x0c) +#define MAX6639_FAN_PRESENT_BIT (0x2) +#define MAX6639_FAN_GOOD_BIT (0x1) +#define FAN_FROM_REG(val) ((480000.0) / (val)) + +static int fan_initd=0; + +enum onlp_fan_id +{ + FAN_RESERVED = 0, + FAN_1_ON_MAIN_BOARD, + FAN_2_ON_MAIN_BOARD, + FAN_1_ON_PSU1, + FAN_1_ON_PSU2 +}; + +#define MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(id) \ + { \ + { ONLP_FAN_ID_CREATE(FAN_##id##_ON_MAIN_BOARD), "Chassis Fan "#id, 0 }, \ + ONLP_FAN_STATUS_B2F | ONLP_FAN_STATUS_PRESENT, \ + (ONLP_FAN_CAPS_SET_PERCENTAGE |ONLP_FAN_CAPS_SET_RPM| ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE), \ + 0, \ + 0, \ + ONLP_FAN_MODE_INVALID, \ + } + +#define MAKE_FAN_INFO_NODE_ON_PSU(psu_id, fan_id) \ + { \ + { ONLP_FAN_ID_CREATE(FAN_##fan_id##_ON_PSU##psu_id), "Chassis PSU-"#psu_id " Fan "#fan_id, 0 }, \ + ONLP_FAN_STATUS_B2F | ONLP_FAN_STATUS_PRESENT, \ + (ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE), \ + 0, \ + 0, \ + ONLP_FAN_MODE_INVALID, \ + } + +/* Static fan information */ +onlp_fan_info_t linfo[] = { + { }, /* Not used */ + MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(1), + MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(2), + MAKE_FAN_INFO_NODE_ON_PSU(1,1), + MAKE_FAN_INFO_NODE_ON_PSU(2,1), +}; + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_FAN(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +static int + _onlp_psu_fan_val_to_rpm (int v) +{ + int lf = (v & 0xffff); + int y, n; + + y = lf & 0x7ff; + n = ((lf >> 11) & 0x1f); + + return (y * (1 << n)); +} + +static int +_onlp_fan_board_init(void) +{ + i2c_devname_write_byte("FAN_ON_BOARD", 0x03,0xfc); + i2c_devname_write_byte("FAN_ON_BOARD", 0x04,0x30); + + i2c_devname_write_byte("FAN_ON_BOARD", 0x10,0x23); + i2c_devname_write_byte("FAN_ON_BOARD", 0x11,0x00); + i2c_devname_write_byte("FAN_ON_BOARD", 0x12,0x00); + i2c_devname_write_byte("FAN_ON_BOARD", 0x13,0x21); + i2c_devname_write_byte("FAN_ON_BOARD", 0x24,0xe8); + + i2c_devname_write_byte("FAN_ON_BOARD", 0x14,0x23); + i2c_devname_write_byte("FAN_ON_BOARD", 0x15,0x00); + i2c_devname_write_byte("FAN_ON_BOARD", 0x16,0x00); + i2c_devname_write_byte("FAN_ON_BOARD", 0x17,0x21); + i2c_devname_write_byte("FAN_ON_BOARD", 0x25,0xe8); + + fan_initd=1; + + return ONLP_STATUS_OK; +} + +static int +_onlp_fani_info_get_fan(int local_id, onlp_fan_info_t* info) +{ + int r_data,fan_good,fan_present,fan_fault; + + /* init the fan on the board*/ + if(fan_initd==0) + _onlp_fan_board_init(); + /* get fan fault status (turn on when any one fails)*/ + r_data= i2c_devname_read_byte("CPLD",MAX6639_FAN_PRESENT_REG); + + if(r_data<0) + return ONLP_STATUS_E_INVALID; + + fan_present = r_data & MAX6639_FAN_PRESENT_BIT; + + if(!fan_present){ + + info->status |= ONLP_FAN_STATUS_PRESENT; + + fan_good=r_data&MAX6639_FAN_GOOD_BIT; + + if(fan_good) + info->status&=~ONLP_FAN_STATUS_FAILED; + else{ + r_data = i2c_devname_read_byte("FAN_ON_BOARD", MAX6639_REG_STATUS); + + if(r_data<0) + return ONLP_STATUS_E_INVALID; + + fan_fault=r_data & MAX6639_REG_FAN_STATUS_BIT(local_id); + + if(!fan_fault) + info->status &=~ ONLP_FAN_STATUS_FAILED; + else{ + info->status |=ONLP_FAN_STATUS_FAILED; + info->rpm=0; + info->percentage=0; + goto mode; + } + } + } + else{ + info->status &= ~ONLP_FAN_STATUS_PRESENT; + return ONLP_STATUS_OK; + } + + /* get fan speed */ + r_data = i2c_devname_read_byte("FAN_ON_BOARD", MAX6639_REG_FAN_CNT(local_id)); + + if(r_data<0) + return ONLP_STATUS_E_INVALID; + + info->rpm = FAN_FROM_REG(r_data); + + /* get speed percentage from rpm */ + info->percentage = (info->rpm * 100.0) / MAX_FAN_SPEED; + +mode: + if(info->percentage>100) + strcpy(info->model,"ONLP_FAN_MODE_LAST"); + else if(info->percentage==100) + strcpy(info->model,"ONLP_FAN_MODE_MAX"); + else if(info->percentage>=75&&info->percentage<100) + strcpy(info->model,"ONLP_FAN_MODE_FAST"); + else if(info->percentage>=35&&info->percentage<75) + strcpy(info->model,"ONLP_FAN_MODE_NORMAL"); + else if(info->percentage>0&&info->percentage<35) + strcpy(info->model,"ONLP_FAN_MODE_SLOW"); + else if(info->percentage<=0) + strcpy(info->model,"ONLP_FAN_MODE_OFF"); + else{ } + + return ONLP_STATUS_OK; +} + +static int +_onlp_fani_info_get_fan_on_psu(int local_id, onlp_fan_info_t* info) +{ + int psu_id; + int r_data,fan_rpm; + int psu_present; + int psu_good; + psu_type_t psu_type; + + enum ag6248c_product_id pid = get_product_id(); + /* get fan fault status + */ + psu_id = (local_id - FAN_1_ON_PSU1) + 1; + DEBUG_PRINT("[Debug][%s][%d][psu_id: %d]\n", __FUNCTION__, __LINE__, psu_id); + + psu_type = get_psu_type(psu_id); /* psu_id = 1 , present PSU1. pus_id =2 , present PSU2 */ + DEBUG_PRINT("[Debug][%s][%d][psu_type: %d]\n", __FUNCTION__, __LINE__, psu_type); + psu_present=psu_status_info_get(psu_id, "present"); + psu_good=psu_status_info_get(psu_id, "good"); + if((psu_present<=0)||(psu_good<=0)){ + info->status &= ~ONLP_FAN_STATUS_PRESENT; + return ONLP_STATUS_OK; + } + + switch (psu_type) { + case PSU_TYPE_AC_F2B: + info->status |= (ONLP_FAN_STATUS_PRESENT | ONLP_FAN_STATUS_F2B); + break; + case PSU_TYPE_AC_B2F: + info->status |= (ONLP_FAN_STATUS_PRESENT | ONLP_FAN_STATUS_B2F); + break; + default: + return ONLP_STATUS_E_UNSUPPORTED; + } + + /* get fan speed*/ + if(pid == PID_AG6248C_48){ + if(psu_id==1) + r_data=i2c_devname_read_word("PSU1_PMBUS", 0x90); + else + r_data=i2c_devname_read_word("PSU2_PMBUS", 0x90); + } + else{ + if(psu_id==1) + r_data=i2c_devname_read_word("PSU1_PMBUS_POE", 0x90); + else + r_data=i2c_devname_read_word("PSU2_PMBUS_POE", 0x90); + } + + if(r_data<0) + return ONLP_STATUS_E_INVALID; + + fan_rpm=_onlp_psu_fan_val_to_rpm(r_data); + + info->rpm = fan_rpm; + + /* get speed percentage from rpm */ + info->percentage = (info->rpm * 100.0) / MAX_PSU_FAN_SPEED; + + if(info->percentage>100) + strcpy(info->model,"ONLP_FAN_MODE_LAST"); + else if(info->percentage==100) + strcpy(info->model,"ONLP_FAN_MODE_MAX"); + else if(info->percentage>=75&&info->percentage<100) + strcpy(info->model,"ONLP_FAN_MODE_FAST"); + else if(info->percentage>=35&&info->percentage<75) + strcpy(info->model,"ONLP_FAN_MODE_NORMAL"); + else if(info->percentage>0&&info->percentage<35) + strcpy(info->model,"ONLP_FAN_MODE_SLOW"); + else if(info->percentage<=0) + strcpy(info->model,"ONLP_FAN_MODE_OFF"); + else{} + + return ONLP_STATUS_OK; +} + +/* + * This function will be called prior to all of onlp_fani_* functions. + */ +int +onlp_fani_init(void) +{ + int rc; + rc=_onlp_fan_board_init(); + return rc; +} + +int +onlp_fani_info_get(onlp_oid_t id, onlp_fan_info_t* info) +{ + int rc = 0; + int local_id; + + VALIDATE(id); + + local_id = ONLP_OID_ID_GET(id); + + if (chassis_fan_count() == 0) { + local_id += 1; + } + + *info = linfo[local_id]; + + switch (local_id) + { + case FAN_1_ON_PSU1: + case FAN_1_ON_PSU2: + rc = _onlp_fani_info_get_fan_on_psu(local_id, info); + break; + case FAN_1_ON_MAIN_BOARD: + case FAN_2_ON_MAIN_BOARD: + rc =_onlp_fani_info_get_fan(local_id, info); + break; + default: + rc = ONLP_STATUS_E_INVALID; + break; + } + + return rc; +} + +/* + * This function sets the speed of the given fan in RPM. + * + * This function will only be called if the fan supprots the RPM_SET + * capability. + * + * It is optional if you have no fans at all with this feature. + */ +int +onlp_fani_rpm_set(onlp_oid_t id, int rpm) +{ /* + the rpm is the actual rpm/1000. so 16 represents the 16000(max spd) + */ + int fan_set_rpm_cont,rc; + int local_id; + int actual_rpm=rpm; + + VALIDATE(id); + + local_id = ONLP_OID_ID_GET(id); + + if((local_id==FAN_1_ON_PSU1)||(local_id==FAN_1_ON_PSU2)) + return ONLP_STATUS_E_UNSUPPORTED; + + if (chassis_fan_count() == 0) { + return ONLP_STATUS_E_INVALID; + } + /* init the fan on the board*/ + if(fan_initd==0) + _onlp_fan_board_init(); + + /* reject rpm=0 (rpm=0, stop fan) */ + if (actual_rpm == 0) + return ONLP_STATUS_E_INVALID; + + /*get ret value for the speed set*/ + fan_set_rpm_cont=FAN_FROM_REG(actual_rpm); + + /*set the rpm speed */ + rc=i2c_devname_write_byte("FAN_ON_BOARD", MAX6639_REG_TARGET_CNT(local_id), fan_set_rpm_cont); + + if(rc<0) + return ONLP_STATUS_E_INVALID; + + return ONLP_STATUS_OK; +} +/*set the percentage for the psu fan*/ + + +/* + * This function sets the fan speed of the given OID as a percentage. + * + * This will only be called if the OID has the PERCENTAGE_SET + * capability. + * + * It is optional if you have no fans at all with this feature. + */ +int +onlp_fani_percentage_set(onlp_oid_t id, int p) +{ + /* + p is between 0 and 100 ,p=100 represents 16000(max spd) + */ + int rpm_val,fan_set_rpm_cont,rc; + int local_id; + + VALIDATE(id); + + local_id = ONLP_OID_ID_GET(id); + + if((local_id==FAN_1_ON_PSU1)||(local_id==FAN_1_ON_PSU2)) + return ONLP_STATUS_E_UNSUPPORTED; + + if (chassis_fan_count() == 0) { + return ONLP_STATUS_E_INVALID; + } + + /* init the fan on the board*/ + if(fan_initd==0) + _onlp_fan_board_init(); + + /* reject p=0 (p=0, stop fan) */ + if (p == 0){ + return ONLP_STATUS_E_INVALID; + } + + rpm_val=p*(MAX_FAN_SPEED/100); + + /*get ret value for the speed set*/ + fan_set_rpm_cont=FAN_FROM_REG(rpm_val); + + /*set the rpm speed */ + rc=i2c_devname_write_byte("FAN_ON_BOARD", MAX6639_REG_TARGET_CNT(local_id), fan_set_rpm_cont); + + if(rc<0) + return ONLP_STATUS_E_INVALID; + + return ONLP_STATUS_OK; + + +} + + +/* + * This function sets the fan speed of the given OID as per + * the predefined ONLP fan speed modes: off, slow, normal, fast, max. + * + * Interpretation of these modes is up to the platform. + * + */ +int +onlp_fani_mode_set(onlp_oid_t id, onlp_fan_mode_t mode) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * This function sets the fan direction of the given OID. + * + * This function is only relevant if the fan OID supports both direction + * capabilities. + * + * This function is optional unless the functionality is available. + */ +int +onlp_fani_dir_set(onlp_oid_t id, onlp_fan_dir_t dir) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + +/* + * Generic fan ioctl. Optional. + */ +int +onlp_fani_ioctl(onlp_oid_t id, va_list vargs) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/ledi.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/ledi.c new file mode 100755 index 00000000..66443e10 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/ledi.c @@ -0,0 +1,375 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include +#include + +#include +#include "platform_lib.h" +#include "arm_delta_ag6248c_int.h" +#include "arm_delta_i2c.h" +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_LED(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + + +#define CPLD_LED_MODE_REG (0X0A) +#define CPLD_LED_MODE_TEMP_REG (0X0B) +#define CPLD_LED_MODE_REG_BIT(ch) (0x3<<2*((ch)-1)) +#define CPLD_LED_MODE_TEMP_REG_BIT (0x0C) +#define CPLD_LED_MODE_MASTER_REG_BIT (0x02) +#define CPLD_LED_MODE_REG_OFFSET(ch) (2*((ch)-1)) +#define CPLD_LED_MODE_TEMP_REG_OFFSET (2) +#define CPLD_LED_MODE_MASTER_REG_OFFSET (1) + + +/* + * Get the information for the given LED OID. + */ +static onlp_led_info_t linfo[] = +{ + { }, /* Not used */ + { + { ONLP_LED_ID_CREATE(LED_SYS), "sys", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_GREEN_BLINKING |ONLP_LED_CAPS_GREEN | + ONLP_LED_CAPS_RED_BLINKING | ONLP_LED_CAPS_RED , + }, + + { + { ONLP_LED_ID_CREATE(LED_FAN), "fan", 0 }, + ONLP_LED_STATUS_PRESENT, ONLP_LED_CAPS_ON_OFF | + ONLP_LED_CAPS_GREEN | ONLP_LED_CAPS_RED, + }, + + { + { ONLP_LED_ID_CREATE(LED_PSU2), "psu2", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF | ONLP_LED_CAPS_GREEN_BLINKING | + ONLP_LED_CAPS_GREEN , + }, + + { + { ONLP_LED_ID_CREATE(LED_PSU1), "psu1", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF | ONLP_LED_CAPS_GREEN_BLINKING | + ONLP_LED_CAPS_GREEN , + }, + + { + { ONLP_LED_ID_CREATE(LED_TEMP), "temp", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF | ONLP_LED_CAPS_GREEN | + ONLP_LED_CAPS_RED , + }, + + { + { ONLP_LED_ID_CREATE(LED_MASTER), "master", 0 }, + ONLP_LED_STATUS_PRESENT, + ONLP_LED_CAPS_ON_OFF | ONLP_LED_CAPS_GREEN , + }, +}; + +static int conver_led_light_mode_to_onl(uint32_t id, int led_ligth_mode) +{ + switch (id) { + case LED_SYS: + switch (led_ligth_mode) { + case SYS_LED_MODE_GREEN_BLINKING: return ONLP_LED_MODE_GREEN_BLINKING; + case SYS_LED_MODE_GREEN: return ONLP_LED_MODE_GREEN; + case SYS_LED_MODE_RED: return ONLP_LED_MODE_RED; + case SYS_LED_MODE_RED_BLINKING: return ONLP_LED_MODE_RED_BLINKING; + default: return ONLP_LED_MODE_OFF; + } + case LED_PSU1: + case LED_PSU2: + switch (led_ligth_mode) { + case PSU_LED_MODE_OFF: return ONLP_LED_MODE_OFF; + case PSU_LED_MODE_GREEN: return ONLP_LED_MODE_GREEN; + case PSU_LED_MODE_GREEN_BLINKING: return ONLP_LED_MODE_GREEN_BLINKING; + default: return ONLP_LED_MODE_OFF; + } + case LED_FAN: + switch (led_ligth_mode) { + case FAN_LED_MODE_OFF: return ONLP_LED_MODE_OFF; + case FAN_LED_MODE_GREEN: return ONLP_LED_MODE_GREEN; + case FAN_LED_MODE_RED: return ONLP_LED_MODE_RED; + default: return ONLP_LED_MODE_OFF; + } + case LED_TEMP: + switch (led_ligth_mode) { + case TEMP_LED_MODE_OFF: return ONLP_LED_MODE_OFF; + case TEMP_LED_MODE_GREEN: return ONLP_LED_MODE_GREEN; + case TEMP_LED_MODE_RED: return ONLP_LED_MODE_RED; + default: return ONLP_LED_MODE_OFF; + } + case LED_MASTER: + switch (led_ligth_mode) { + case MASTER_LED_MODE_OFF: return ONLP_LED_MODE_OFF; + case MASTER_LED_MODE_GREEN: return ONLP_LED_MODE_GREEN; + default: return ONLP_LED_MODE_OFF; + } + } + + return ONLP_LED_MODE_OFF; +} + +static int conver_onlp_led_light_mode_to_driver(uint32_t id, int led_ligth_mode) +{ + switch (id) { + case LED_SYS: + switch (led_ligth_mode) { + case ONLP_LED_MODE_GREEN_BLINKING: return SYS_LED_MODE_GREEN_BLINKING; + case ONLP_LED_MODE_GREEN: return SYS_LED_MODE_GREEN; + case ONLP_LED_MODE_RED: return SYS_LED_MODE_RED ; + case ONLP_LED_MODE_RED_BLINKING: return SYS_LED_MODE_RED_BLINKING; + default: return SYS_LED_MODE_UNKNOWN; + } + case LED_PSU1: + case LED_PSU2: + switch (led_ligth_mode) { + case ONLP_LED_MODE_OFF: return PSU_LED_MODE_OFF; + case ONLP_LED_MODE_GREEN: return PSU_LED_MODE_GREEN; + case ONLP_LED_MODE_GREEN_BLINKING: return PSU_LED_MODE_GREEN_BLINKING; + default: return PSU_LED_MODE_UNKNOWN; + } + case LED_FAN: + switch (led_ligth_mode) { + case ONLP_LED_MODE_OFF: return FAN_LED_MODE_OFF; + case ONLP_LED_MODE_GREEN: return FAN_LED_MODE_GREEN ; + case ONLP_LED_MODE_RED: return FAN_LED_MODE_RED; + default: return FAN_LED_MODE_UNKNOWN; + } + case LED_TEMP: + switch (led_ligth_mode) { + case ONLP_LED_MODE_OFF: return TEMP_LED_MODE_OFF; + case ONLP_LED_MODE_GREEN: return TEMP_LED_MODE_GREEN; + case ONLP_LED_MODE_RED: return TEMP_LED_MODE_RED; + default: return TEMP_LED_MODE_UNKNOWN; + } + case LED_MASTER: + switch (led_ligth_mode) { + case ONLP_LED_MODE_OFF: return MASTER_LED_MODE_OFF; + case ONLP_LED_MODE_GREEN: return MASTER_LED_MODE_GREEN; + default: return TEMP_LED_MODE_UNKNOWN; + } + + } + + return ONLP_LED_MODE_OFF; +} + +/* + * This function will be called prior to any other onlp_ledi_* functions. + */ +int +onlp_ledi_init(void) +{ + return ONLP_STATUS_OK; +} + +static int +onlp_ledi_oid_to_internal_id(onlp_oid_t id) +{ + int lid = ONLP_OID_ID_GET(id); + + switch (lid) { + case 1: return LED_SYS; + case 2: return LED_FAN; + case 3: return LED_PSU2; + case 4: return LED_PSU1; + case 5: return LED_TEMP; + case 6: return LED_MASTER; + default : + return LED_UNKNOW; + } + + return LED_UNKNOW; +} + +int +onlp_ledi_info_get(onlp_oid_t id, onlp_led_info_t* info) +{ + int r_data,m_data; + + VALIDATE(id); + + enum ag6248c_product_id pid = get_product_id(); + + int lid = onlp_ledi_oid_to_internal_id(id); + + if (pid == PID_AG6248C_48) { + if((lid >= LED_UNKNOW) || (lid < LED_SYS)) + return ONLP_STATUS_E_UNSUPPORTED; + } + else if (pid == PID_AG6248C_48P) { + if((lid >= LED_MASTER) || (lid < LED_SYS)) + return ONLP_STATUS_E_UNSUPPORTED; + } + else + return ONLP_STATUS_E_UNSUPPORTED; + + /* Set the onlp_oid_hdr_t and capabilities */ + *info = linfo[lid]; + + if((lid==LED_TEMP)||(lid==LED_MASTER)) + r_data=i2c_devname_read_byte("CPLD",CPLD_LED_MODE_TEMP_REG); + else + r_data=i2c_devname_read_byte("CPLD",CPLD_LED_MODE_REG); + + if(r_data<0) + return ONLP_STATUS_E_INTERNAL; + + if(lid==LED_TEMP) + m_data=(r_data & CPLD_LED_MODE_TEMP_REG_BIT); + else if(lid==LED_MASTER) + m_data=(r_data & CPLD_LED_MODE_MASTER_REG_BIT); + else + m_data=(r_data & CPLD_LED_MODE_REG_BIT(lid)); + + if(lid==LED_TEMP) + m_data=(m_data>> CPLD_LED_MODE_TEMP_REG_OFFSET); + else if(lid==LED_MASTER) + m_data=(m_data>> CPLD_LED_MODE_MASTER_REG_OFFSET); + else + m_data=(m_data>>CPLD_LED_MODE_REG_OFFSET(lid)); + + info->mode = conver_led_light_mode_to_onl(lid, m_data); + + /* Set the on/off status */ + if (info->mode != ONLP_LED_MODE_OFF) { + info->status |= ONLP_LED_STATUS_ON; + + } + + return ONLP_STATUS_OK; +} + +/* + * This function puts the LED into the given mode. It is a more functional + * interface for multimode LEDs. + * + * Only modes reported in the LED's capabilities will be attempted. + */ +int +onlp_ledi_mode_set(onlp_oid_t id, onlp_led_mode_t mode) +{ + int r_data,driver_mode, rc; + + VALIDATE(id); + + enum ag6248c_product_id pid = get_product_id(); + + int lid = onlp_ledi_oid_to_internal_id(id); + + if (pid == PID_AG6248C_48) { + if((lid >= LED_UNKNOW) || (lid < LED_SYS)) + return ONLP_STATUS_E_UNSUPPORTED; + } + else if (pid == PID_AG6248C_48P) { + if((lid >= LED_MASTER) || (lid < LED_SYS)) + return ONLP_STATUS_E_UNSUPPORTED; + } + else + return ONLP_STATUS_E_UNSUPPORTED; + + driver_mode = conver_onlp_led_light_mode_to_driver(lid, mode); + + if((driver_mode==SYS_LED_MODE_UNKNOWN)||(driver_mode==PSU_LED_MODE_UNKNOWN)||\ + (driver_mode==FAN_LED_MODE_UNKNOWN)||(driver_mode==TEMP_LED_MODE_UNKNOWN)||\ + (driver_mode==MASTER_LED_MODE_UNKNOWN)) + return ONLP_STATUS_E_UNSUPPORTED; + + if((lid==LED_TEMP)||(lid==LED_MASTER)) + r_data=i2c_devname_read_byte("CPLD",CPLD_LED_MODE_TEMP_REG); + else + r_data=i2c_devname_read_byte("CPLD",CPLD_LED_MODE_REG); + + if(r_data<0) + return ONLP_STATUS_E_INTERNAL; + + if(lid==LED_TEMP) + r_data=r_data&(~CPLD_LED_MODE_TEMP_REG_BIT); + else if(lid==LED_MASTER) + r_data=r_data&(~CPLD_LED_MODE_MASTER_REG_BIT); + else + r_data=r_data&(~CPLD_LED_MODE_REG_BIT(lid)); + + if(lid==LED_TEMP) + driver_mode=(driver_mode< +# +# Copyright 2014, 2015 Big Switch Networks, Inc. +# +# Licensed under the Eclipse Public License, Version 1.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.eclipse.org/legal/epl-v10.html +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the +# License. +# +# +############################################################ +# +# +# +############################################################ + +LIBRARY := arm_delta_ag6248c +$(LIBRARY)_SUBDIR := $(dir $(lastword $(MAKEFILE_LIST))) +#$(LIBRARY)_LAST := 1 +include $(BUILDER)/lib.mk diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.c new file mode 100755 index 00000000..118cc437 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.c @@ -0,0 +1,85 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include "platform_lib.h" +#include "arm_delta_i2c.h" + + +psu_type_t get_psu_type(int id) +{ + if ((id == PSU1_ID)||(id == PSU2_ID)) + return PSU_TYPE_AC_B2F; + return PSU_TYPE_UNKNOWN; +} + +enum ag6248c_product_id get_product_id(void) +{ + int ret; + int pid = PID_UNKNOWN; + + ret = i2c_devname_read_byte("CPLD", 0X01); + + if(ret<0) + return PID_UNKNOWN; + + pid = ((ret&0xf0)>>4); + + + if (pid >= PID_UNKNOWN || pid < PID_AG6248C_48) { + return PID_UNKNOWN; + } + + return pid; +} + +int chassis_fan_count(void) +{ + enum ag6248c_product_id pid = get_product_id(); + + if ((pid == PID_AG6248C_48P)||(pid == PID_AG6248C_48)) { + return 4; + } + + return 0 ; +} + +int chassis_led_count(void) +{ + enum ag6248c_product_id pid = get_product_id(); + + if (pid == PID_AG6248C_48P) + return 5; + else if(pid == PID_AG6248C_48) + return 6; + else + return 0; +} diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.h b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.h new file mode 100755 index 00000000..7cd66a5f --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/platform_lib.h @@ -0,0 +1,136 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#ifndef __PLATFORM_LIB_H__ +#define __PLATFORM_LIB_H__ + +#include "arm_delta_ag6248c_log.h" + +#define CHASSIS_THERMAL_COUNT 4 +#define CHASSIS_PSU_COUNT 2 + +#define PSU1_ID 1 +#define PSU2_ID 2 + + +typedef enum psu_type { + PSU_TYPE_UNKNOWN, + PSU_TYPE_AC_F2B, + PSU_TYPE_AC_B2F +} psu_type_t; + +psu_type_t get_psu_type(int id); + +#define DEBUG_MODE 0 + +#if (DEBUG_MODE == 1) + #define DEBUG_PRINT(format, ...) printf(format, __VA_ARGS__) +#else + #define DEBUG_PRINT(format, ...) +#endif + +enum onlp_fan_duty_cycle_percentage +{ + FAN_IDLE_RPM = 5500, + FAN_LEVEL1_RPM = 7000, + FAN_LEVEL2_RPM = 9000, + FAN_LEVEL3_RPM = 12000, +}; + +enum ag6248c_product_id { + PID_AG6248C_48= 2, + PID_AG6248C_48P=4, + PID_UNKNOWN +}; +/* LED related data */ +enum sys_led_light_mode { + SYS_LED_MODE_GREEN_BLINKING = 0, + SYS_LED_MODE_GREEN, + SYS_LED_MODE_RED, + SYS_LED_MODE_RED_BLINKING, + SYS_LED_MODE_AUTO, + SYS_LED_MODE_UNKNOWN +}; + +enum fan_led_light_mode { + FAN_LED_MODE_OFF=0, + FAN_LED_MODE_GREEN, + FAN_LED_MODE_RED, + FAN_LED_MODE_RESERVERD, + FAN_LED_MODE_AUTO, + FAN_LED_MODE_UNKNOWN +}; + +enum psu_led_light_mode { + PSU_LED_MODE_OFF =0, + PSU_LED_MODE_GREEN, + PSU_LED_MODE_GREEN_BLINKING, + PSU_LED_MODE_RESERVERD, + PSU_LED_MODE_UNKNOWN +}; + +enum temp_led_light_mode { + TEMP_LED_MODE_OFF =0, + TEMP_LED_MODE_GREEN, + TEMP_LED_MODE_RED, + TEMP_LED_MODE_RESERVERD, + TEMP_LED_MODE_UNKNOWN +}; + +enum master_led_light_mode { + MASTER_LED_MODE_OFF =0, + MASTER_LED_MODE_GREEN, + MASTER_LED_MODE_OFF1, + MASTER_LED_MODE_RESERVERD, + MASTER_LED_MODE_UNKNOWN +}; + +typedef enum onlp_led_id +{ + LED_RESERVED = 0, + LED_SYS, + LED_FAN, + LED_PSU2, + LED_PSU1, + LED_TEMP, + LED_MASTER, + LED_UNKNOW +} onlp_led_id_t; + +enum ag6248c_product_id get_product_id(void); +int chassis_fan_count(void); +int chassis_led_count(void); + +typedef enum platform_id_e { + PLATFORM_ID_UNKNOWN, + PLATFORM_ID_POWERPC_DELTA_AG6248C_POE_R0, + PLATFORM_ID_POWERPC_DELTA_AG6248C_R0, +} platform_id_t; + +extern platform_id_t platform_id; + +extern int psu_status_info_get(int id, char *node); +#endif /* __PLATFORM_LIB_H__ */ + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/psui.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/psui.c new file mode 100755 index 00000000..3a0d8344 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/psui.c @@ -0,0 +1,381 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include +#include "platform_lib.h" +#include "arm_delta_ag6248c_int.h" +#include "arm_delta_i2c.h" + +#define PSU_STATUS_PRESENT 1 +#define PSU_STATUS_POWER_GOOD 1 +#define PSU_STATUS_REG (0X08) +#define PSU_STATUS_PRESENT_BIT(ch) (0x8<<4*(ch-1)) +#define PSU_STATUS_GOOD_BIT(ch) (0x4<<4*(ch-1)) +#define PSU_STATUS_PRESENT_OFFSET(ch) (4*ch-1) +#define PSU_STATUS_GOOD_OFFSET(ch) (0x2+4*(ch-1)) +#define PSU_PNBUS_VIN_REG (0x88) +#define PSU_PNBUS_IIN_REG (0x89) +#define PSU_PNBUS_PIN_REG (0x97) +#define PSU_PNBUS_VOUT_REG (0x8b) +#define PSU_PNBUS_IOUT_REG (0x8c) +#define PSU_PNBUS_POUT_REG (0x96) +#define PSU_PNBUS_SERIAL_REG (0x39) +#define PSU_PNBUS_MODEL_REG (0xc) + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_PSU(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + +static long psu_data_convert(unsigned int d, int mult) +{ + long X, Y, N, n; + + Y = d & 0x07FF; + N = (d >> 11) & 0x0f; + n = d & 0x8000 ? 1 : 0; + + if (n) + X = (Y * mult) / ((1<<(((~N)&0xf)+1))) ; + else + X = (Y * mult) * (N=(1<<(N&0xf))); + + return X; +} + +static long psu_data_convert_16(unsigned int d, int mult) +{ + long X; + X = (d * mult) / (1 << 9); + return X; + +} + + +int +psu_status_info_get(int id, char *node) +{ + int ret; + int r_data; + ret=i2c_devname_read_byte("CPLD",PSU_STATUS_REG); + + if(ret<0) + return -1; + + if (PSU1_ID == id) { + if(!strcmp("present",node)) + r_data=!((ret& PSU_STATUS_PRESENT_BIT(id))>> PSU_STATUS_PRESENT_OFFSET(id)); + else if(!strcmp("good",node)) + r_data=((ret& PSU_STATUS_GOOD_BIT(id))>> PSU_STATUS_GOOD_OFFSET(id)); + else + r_data=-1; + + } + else if (PSU2_ID == id) { + + if(!strcmp("present",node)) + r_data=!((ret& PSU_STATUS_PRESENT_BIT(id))>> PSU_STATUS_PRESENT_OFFSET(id)); + else if(!strcmp("good",node)) + r_data=((ret& PSU_STATUS_GOOD_BIT(id))>> PSU_STATUS_GOOD_OFFSET(id)); + else + r_data=-1; + } + else{ + r_data=-1; + } + + return r_data; +} + +static int +psu_value_info_get(int id, char *type) +{ + int ret; + char *dev_name; + int reg_offset; + + enum ag6248c_product_id pid = get_product_id(); + + if(pid == PID_AG6248C_48){ + if(PSU1_ID == id) + dev_name="PSU1_PMBUS"; + else + dev_name="PSU2_PMBUS"; + } + else{ + if(PSU1_ID == id) + dev_name="PSU1_PMBUS_POE"; + else + dev_name="PSU2_PMBUS_POE"; + } + + if(!strcmp(type,"vin")) + reg_offset=PSU_PNBUS_VIN_REG; + else if(!strcmp(type,"iin")) + reg_offset=PSU_PNBUS_IIN_REG; + else if(!strcmp(type,"pin")) + reg_offset=PSU_PNBUS_PIN_REG; + else if(!strcmp(type,"vout")) + reg_offset=PSU_PNBUS_VOUT_REG; + else if(!strcmp(type,"iout")) + reg_offset=PSU_PNBUS_IOUT_REG; + else + reg_offset=PSU_PNBUS_POUT_REG; + + ret=i2c_devname_read_word(dev_name,reg_offset); + + if(ret<0) + return -1; + + return ret; +} + + +static int +psu_serial_model_info_get(int id,char *type,char*data,int data_len) +{ + int i,r_data,re_cnt; + char *dev_name; + int reg_offset; + + enum ag6248c_product_id pid = get_product_id(); + + if(pid == PID_AG6248C_48){ + if(PSU1_ID == id) + dev_name="PSU1_EEPROM"; + else + dev_name="PSU2_EEPROM"; + } + else{ + if(PSU1_ID == id) + dev_name="PSU1_EEPROM_POE"; + else + dev_name="PSU2_EEPROM_POE"; + } + + if(!strcmp(type,"serial")) + reg_offset=PSU_PNBUS_SERIAL_REG; + else + reg_offset=PSU_PNBUS_MODEL_REG; + + for(i=0;istatus &= ~ONLP_PSU_STATUS_PRESENT; + return ONLP_STATUS_OK; + } + info->status |= ONLP_PSU_STATUS_PRESENT; + + /* Get power good status */ + val=psu_status_info_get(index,"good"); + + if (val<0) { + AIM_LOG_INFO("Unable to read PSU %d good value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + if (val != PSU_STATUS_POWER_GOOD) { + info->status |= ONLP_PSU_STATUS_FAILED; + return ONLP_STATUS_OK; + } + + /* Get PSU type + */ + psu_type = get_psu_type(index); + + switch (psu_type) { + case PSU_TYPE_AC_F2B: + case PSU_TYPE_AC_B2F: + info->caps = ONLP_PSU_CAPS_AC; + ret = ONLP_STATUS_OK; + break; + case PSU_TYPE_UNKNOWN: /* User insert a unknown PSU or unplugged.*/ + info->status |= ONLP_PSU_STATUS_UNPLUGGED; + info->status &= ~ONLP_PSU_STATUS_FAILED; + ret = ONLP_STATUS_OK; + break; + default: + ret = ONLP_STATUS_E_UNSUPPORTED; + break; + } + + /* Get PSU vin,vout*/ + + r_data=psu_value_info_get(index,"vin"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Vin value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->mvin=psu_data_convert(r_data,1000); + + r_data=psu_value_info_get(index,"vout"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Vout value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->mvout=psu_data_convert_16(r_data,1000); + /* Get PSU iin, iout + */ + r_data=psu_value_info_get(index,"iin"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Iin value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->miin=psu_data_convert(r_data,1000); + + r_data=psu_value_info_get(index,"iout"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Iout value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->miout=psu_data_convert(r_data,1000); + + /* Get PSU pin, pout + */ + r_data=psu_value_info_get(index,"pin"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Pin value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->mpin=psu_data_convert(r_data,1000); + + r_data=psu_value_info_get(index,"pout"); + + if (r_data<0) { + AIM_LOG_INFO("Unable to read PSU %d Pout value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + info->mpout=psu_data_convert(r_data,1000); + /* Get PSU serial + */ + + ret=psu_serial_model_info_get(index,"serial",sn_data,14); + if (ret!=ONLP_STATUS_OK) { + AIM_LOG_INFO("Unable to read PSU %d SN value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + strcpy(info->serial,sn_data); + + /* Get PSU model + */ + ret=psu_serial_model_info_get(index,"model",model_data,16); + if (ret!=ONLP_STATUS_OK) { + AIM_LOG_INFO("Unable to read PSU %d model value)\r\n", index); + return ONLP_STATUS_E_INVALID; + } + + strcpy(info->model,model_data); + + return ONLP_STATUS_OK; +} + +int +onlp_psui_ioctl(onlp_oid_t pid, va_list vargs) +{ + return ONLP_STATUS_E_UNSUPPORTED; +} + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sfpi.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sfpi.c new file mode 100755 index 00000000..4764bbe9 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sfpi.c @@ -0,0 +1,364 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include "platform_lib.h" + +#include +#include "arm_delta_ag6248c_log.h" +#include "arm_delta_i2c.h" + +#define SFP_PRESENT_REG (0X14) +#define SFP_RX_LOS_REG (0X11) +#define SFP_TX_DISABLE_REG (0X17) +#define SFP_PRESENT_PORT47_BIT (0X40) +#define SFP_PRESENT_PORT48_BIT (0X80) +#define SFP_PRESENT_PORT47_OFFSET (0X06) +#define SFP_PRESENT_PORT48_OFFSET (0X07) + + +/************************************************************ + * + * SFPI Entry Points + * + ***********************************************************/ +int +onlp_sfpi_init(void) +{ + /* Called at initialization time */ + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_bitmap_get(onlp_sfp_bitmap_t* bmap) +{ + int p; + int start_port, end_port; + + if((platform_id == PLATFORM_ID_POWERPC_DELTA_AG6248C_POE_R0)|| + (platform_id ==PLATFORM_ID_POWERPC_DELTA_AG6248C_R0)) + { + start_port = 47; + end_port = 48; + } + else /*reserved*/ + { + AIM_LOG_ERROR("The platform id %d is invalid \r\n", platform_id); + return ONLP_STATUS_E_UNSUPPORTED; + } + + for(p = start_port; p <=end_port; p++) { + AIM_BITMAP_SET(bmap, p); + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_is_present(int port) +{ + /* + * Return 1 if present. + * Return 0 if not present. + * Return < 0 if error. + */ + int present,r_data; + + if((port==47)||(port==48)) + r_data=i2c_devname_read_byte("CPLD", SFP_PRESENT_REG); + else{ + AIM_LOG_ERROR("The port %d is invalid \r\n", port); + return ONLP_STATUS_E_UNSUPPORTED; + } + + if(r_data<0){ + AIM_LOG_ERROR("Unable to read present status from port(%d)\r\n", port); + return ONLP_STATUS_E_INTERNAL; + } + + if(port==47){ + r_data&=SFP_PRESENT_PORT47_BIT; + present=!(r_data>>SFP_PRESENT_PORT47_OFFSET); + } + else{ + r_data&=SFP_PRESENT_PORT48_BIT; + present=!(r_data>>SFP_PRESENT_PORT48_OFFSET); + } + + return present; +} + +int +onlp_sfpi_presence_bitmap_get(onlp_sfp_bitmap_t* dst) +{ + int status; + int port, i = 0; + uint64_t presence_all=0; + + AIM_BITMAP_CLR_ALL(dst); + + if((platform_id == PLATFORM_ID_POWERPC_DELTA_AG6248C_POE_R0)|| \ + (platform_id ==PLATFORM_ID_POWERPC_DELTA_AG6248C_R0)){ + + port=47; + + } + else{ + AIM_LOG_ERROR("The platform id %d is invalid \r\n", platform_id); + return ONLP_STATUS_E_UNSUPPORTED; + } + + status=i2c_devname_read_byte("CPLD", SFP_PRESENT_REG); + + if(status<0){ + AIM_LOG_ERROR("Unable to read the sfp_is_present_all value. \r\n"); + return ONLP_STATUS_E_INTERNAL; + } + status=~status; + + status>>=6; + + /* Convert to 64 bit integer in port order */ + + presence_all = status & 0x3; + + presence_all <<= port; + + /* Populate bitmap */ + for(i = 0; presence_all; i++) { + AIM_BITMAP_MOD(dst, i, (presence_all & 1)); + presence_all >>= 1; + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_rx_los_bitmap_get(onlp_sfp_bitmap_t* dst) +{ + int status; + int port,i = 0; + uint64_t rx_los_all = 0; + + AIM_BITMAP_CLR_ALL(dst); + + if((platform_id == PLATFORM_ID_POWERPC_DELTA_AG6248C_POE_R0)|| \ + (platform_id ==PLATFORM_ID_POWERPC_DELTA_AG6248C_R0)){ + + port=47; + + } + else{ + AIM_LOG_ERROR("The platform id %d is invalid \r\n", platform_id); + return ONLP_STATUS_E_UNSUPPORTED; + } + + status=i2c_devname_read_byte("CPLD", SFP_RX_LOS_REG); + + if(status<0){ + AIM_LOG_ERROR("Unable to read the rx loss reg value. \r\n"); + return ONLP_STATUS_E_INTERNAL; + } + + status>>=6; + + /* Convert to 64 bit integer in port order */ + rx_los_all = status & 0x3; + + rx_los_all <<= port; + + /* Populate bitmap */ + for(i = 0; rx_los_all; i++) { + AIM_BITMAP_MOD(dst, i, (rx_los_all & 1)); + rx_los_all >>= 1; + } + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_eeprom_read(int port, uint8_t data[256]) +{ + /* + * Read the SFP eeprom into data[] + * + * Return MISSING if SFP is missing. + * Return OK if eeprom is read + */ + + int i, r_data, re_cnt; + char* sfp_name; + + memset(data, 0, 256); + + if(port==47) + sfp_name="SFP1"; + else + sfp_name="SFP2"; + + + for(i=0;i<256;i++){ + re_cnt=3; + while(re_cnt){ + r_data=i2c_devname_read_byte(sfp_name,i); + if(r_data<0){ + re_cnt--; + continue; + } + data[i]=r_data; + break; + } + if(re_cnt==0){ + AIM_LOG_ERROR("Unable to read the %d reg \r\n",i); + return ONLP_STATUS_E_INTERNAL; + } + + } + + + return ONLP_STATUS_OK; +} + +int +onlp_sfpi_dom_read(int port, uint8_t data[256]) +{ + + return onlp_sfpi_eeprom_read( port, data); +} + +int +onlp_sfpi_control_set(int port, onlp_sfp_control_t control, int value) +{ + /*value is 1 if the tx disable + value is 0 if the tx enable + */ + + int rc,r_data,dis_value,present; + + present=onlp_sfpi_is_present(port); + + if(present==0){ + AIM_LOG_INFO("The port %d is not present and can not set tx disable\r\n",port); + return ONLP_STATUS_E_UNSUPPORTED; + } + + r_data=i2c_devname_read_byte("CPLD", SFP_TX_DISABLE_REG); + + if(r_data<0){ + AIM_LOG_INFO("Unable to read sfp tx disable reg value\r\n"); + return ONLP_STATUS_E_INTERNAL; + } + + if(port==47){ + r_data&=~(0x1<>SFP_PRESENT_PORT47_OFFSET); + } + else{ + r_data&=(0x1<>SFP_PRESENT_PORT48_OFFSET); + } + + return ONLP_STATUS_OK; +} + + +int +onlp_sfpi_denit(void) +{ + return ONLP_STATUS_OK; +} diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sysi.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sysi.c new file mode 100755 index 00000000..b8b0adec --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/sysi.c @@ -0,0 +1,290 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * + * + ***********************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "arm_delta_ag6248c_int.h" +#include "arm_delta_ag6248c_log.h" + +#include "platform_lib.h" +#include "arm_delta_i2c.h" +platform_id_t platform_id = PLATFORM_ID_UNKNOWN; + +#define ONIE_PLATFORM_NAME "arm-delta-ag6248c-r0" + +const char* +onlp_sysi_platform_get(void) +{ + enum ag6248c_product_id pid = get_product_id(); + + if (pid == PID_AG6248C_48) + return "arm-delta-ag6248c"; + else if(pid == PID_AG6248C_48P) + return "arm-delta-ag6248c-poe"; + else + return "unknow"; +} + +int +onlp_sysi_platform_set(const char* platform) +{ + if(strstr(platform,"arm-delta-ag6248c-r0")) { + platform_id = PLATFORM_ID_POWERPC_DELTA_AG6248C_R0; + return ONLP_STATUS_OK; + } + if(strstr(platform,"arm-delta-ag6248c-poe-r0")) { + platform_id = PLATFORM_ID_POWERPC_DELTA_AG6248C_POE_R0; + return ONLP_STATUS_OK; + } + AIM_LOG_ERROR("No support for platform '%s'", platform); + return ONLP_STATUS_E_UNSUPPORTED; +} + +int +onlp_sysi_platform_info_get(onlp_platform_info_t* pi) +{ + int v; + + v = i2c_devname_read_byte("CPLD", 0X07); + + pi->cpld_versions = aim_fstrdup("%d", v); + + return 0; +} + +int +onlp_sysi_onie_data_get(uint8_t** data, int* size) +{ + uint8_t* rdata = aim_zmalloc(256); + int fd,rc_size; + char fullpath[20] = {0}; + + sprintf(fullpath, "/dev/mtd7"); + + fd=open(fullpath,O_RDWR); + + if(fd<0){ + aim_free(rdata); + return ONLP_STATUS_E_INTERNAL ; + } + + rc_size=read(fd,rdata,256); + + if(rc_size<0||rc_size!=256){ + aim_free(rdata); + return ONLP_STATUS_E_INTERNAL ; + } + + *data = rdata; + + return ONLP_STATUS_OK; + + +} + +void +onlp_sysi_onie_data_free(uint8_t* data) +{ + aim_free(data); +} + + + +int +onlp_sysi_oids_get(onlp_oid_t* table, int max) +{ + int i; + onlp_oid_t* e = table; + memset(table, 0, max*sizeof(onlp_oid_t)); + + /* 1 Thermal sensors on the chassis */ + for (i = 1; i <= CHASSIS_THERMAL_COUNT; i++) { + *e++ = ONLP_THERMAL_ID_CREATE(i); + } + + /* LEDs on the chassis */ + for (i = 1; i <= chassis_led_count(); i++) { + *e++ = ONLP_LED_ID_CREATE(i); + } + + /* 1 Fans on the chassis */ + for (i = 1; i <= chassis_fan_count(); i++) { + *e++ = ONLP_FAN_ID_CREATE(i); + } + + /* 2 PSUs on the chassis */ + for (i = 1; i <= CHASSIS_PSU_COUNT; i++) { + *e++ = ONLP_PSU_ID_CREATE(i); + } + + return 0; +} + +int +onlp_sysi_platform_manage_fans(void) +{ + + int rc; + onlp_thermal_info_t ti1; + onlp_thermal_info_t ti2; + int mtemp=0; + int new_rpm=0; + + if (chassis_fan_count() == 0) { + return ONLP_STATUS_E_UNSUPPORTED; + } + + /* Get temperature */ + rc = onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(1), &ti1); + + if (rc != ONLP_STATUS_OK) { + return rc; + } + + rc = onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(2), &ti2); + + if (rc != ONLP_STATUS_OK) { + return rc; + } + + mtemp=(ti1.mcelsius+ti2.mcelsius)/2; + /* Bring fan speed according the temp + */ + if(mtemp<50000) + new_rpm=FAN_IDLE_RPM; + else if((mtemp>=55000)&&(mtemp<60000)) + new_rpm=FAN_LEVEL1_RPM; + else if((mtemp>=65000)&&(mtemp<70000)) + new_rpm=FAN_LEVEL2_RPM; + else if(mtemp>=75000) + new_rpm=FAN_LEVEL3_RPM; + else{ + return ONLP_STATUS_OK; + } + + onlp_fani_rpm_set(ONLP_FAN_ID_CREATE(1),new_rpm); + onlp_fani_rpm_set(ONLP_FAN_ID_CREATE(2),new_rpm); + + + return ONLP_STATUS_OK; +} + + +int +onlp_sysi_platform_manage_leds(void) +{ + int rc,rc1; + + onlp_fan_info_t info1,info2; + onlp_led_mode_t fan_new_mode; + onlp_thermal_info_t ti; + onlp_led_mode_t temp_new_mode; + onlp_psu_info_t psu1; + onlp_led_mode_t psu1_new_mode; + onlp_psu_info_t psu2; + onlp_led_mode_t psu2_new_mode; + onlp_led_mode_t sys_new_mode; + /*fan led */ + rc=onlp_fani_info_get(ONLP_FAN_ID_CREATE(1), &info1); + + rc1=onlp_fani_info_get(ONLP_FAN_ID_CREATE(2), &info2); + + if ((rc != ONLP_STATUS_OK)||(rc1 != ONLP_STATUS_OK)){ + fan_new_mode=ONLP_LED_MODE_RED; + goto temp_led; + } + if(((info1.status&0x3)==1)&&((info2.status&0x3)==1)) + fan_new_mode=ONLP_LED_MODE_GREEN; + else + fan_new_mode=ONLP_LED_MODE_RED; + +temp_led: + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN),fan_new_mode); + + /*temperature led */ + + rc = onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(1), &ti); + if (rc != ONLP_STATUS_OK) { + temp_new_mode=ONLP_LED_MODE_OFF; + goto psu1_led; + } + if(ti.mcelsius >= 75000) + temp_new_mode=ONLP_LED_MODE_RED; + else + temp_new_mode=ONLP_LED_MODE_GREEN; + +psu1_led: + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_TEMP),temp_new_mode); + + /*psu1 and psu2 led */ + rc=onlp_psui_info_get(ONLP_PSU_ID_CREATE(1),&psu1); + + if (rc != ONLP_STATUS_OK) { + psu1_new_mode=ONLP_LED_MODE_OFF; + goto psu2_led; + } + + if((psu1.status&0x1)&&!(psu1.status&0x2)) + psu1_new_mode=ONLP_LED_MODE_GREEN; + else + psu1_new_mode=ONLP_LED_MODE_OFF; +psu2_led: + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_PSU1),psu1_new_mode); + //psu2 led ---------------- + rc=onlp_psui_info_get(ONLP_PSU_ID_CREATE(2),&psu2); + + if (rc != ONLP_STATUS_OK) { + psu2_new_mode=ONLP_LED_MODE_OFF; + goto sys_led; + } + + if((psu2.status&0x1)&&!(psu2.status&0x2)) + psu2_new_mode=ONLP_LED_MODE_GREEN; + else + psu2_new_mode=ONLP_LED_MODE_OFF; +sys_led : + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_PSU2),psu2_new_mode); + //sys led ---------------- + + if((fan_new_mode!=ONLP_LED_MODE_GREEN)||((psu2_new_mode!=ONLP_LED_MODE_GREEN)&& \ + (psu1_new_mode!=ONLP_LED_MODE_GREEN))) + sys_new_mode=ONLP_LED_MODE_RED_BLINKING; + else + sys_new_mode=ONLP_LED_MODE_GREEN; + + onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_SYS),sys_new_mode); + + + return ONLP_STATUS_OK; +} + diff --git a/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/thermali.c b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/thermali.c new file mode 100755 index 00000000..807855c9 --- /dev/null +++ b/packages/platforms/delta/armel/arm-delta-ag6248c/src/arm_delta_ag6248c/module/src/thermali.c @@ -0,0 +1,208 @@ +/************************************************************ + * + * + * Copyright 2014, 2015 Big Switch Networks, Inc. + * Copyright 2016 Accton Technology Corporation. + * Copyright 2017 Delta Networks, Inc + * Licensed under the Eclipse Public License, Version 1.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.eclipse.org/legal/epl-v10.html + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, + * either express or implied. See the License for the specific + * language governing permissions and limitations under the + * License. + * + * + ************************************************************ + * + * Thermal Sensor Platform Implementation. + * + ***********************************************************/ +#include +#include +#include +#include +#include +#include "platform_lib.h" +#include "arm_delta_ag6248c_log.h" +#include +#include "arm_delta_i2c.h" +#define prefix_path "/sys/bus/i2c/devices/" +#define LOCAL_DEBUG 0 + +#define VALIDATE(_id) \ + do { \ + if(!ONLP_OID_IS_THERMAL(_id)) { \ + return ONLP_STATUS_E_INVALID; \ + } \ + } while(0) + + +enum onlp_thermal_id +{ + THERMAL_RESERVED = 0, + THERMAL_1_CLOSE_TO_MAC, + THERMAL_2_CLOSE_TO_PHY, + THERMAL_1_ON_PSU1, + THERMAL_1_ON_PSU2, +}; + +static char* last_path[] = /* must map with onlp_thermal_id */ +{ + "reserved", + "0-0049/temp1_input", + "0-004a/temp1_input", +}; + +/* Static values */ +static onlp_thermal_info_t linfo[] = { + { }, /* Not used */ + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_CLOSE_TO_MAC), "Thermal Sensor 1- close to mac", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_2_CLOSE_TO_PHY), "Thermal Sensor 2- close to phy", 0}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU1), "PSU-1 Thermal Sensor 1", ONLP_PSU_ID_CREATE(1)}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + }, + { { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU2), "PSU-2 Thermal Sensor 1", ONLP_PSU_ID_CREATE(2)}, + ONLP_THERMAL_STATUS_PRESENT, + ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS + } +}; +static int +_onlp_psu_thermali_val_to_temperature (int v,int mult) +{ + long X, Y, N, n; + Y = v & 0x07FF; + N = (v >> 11) & 0x0f; + n = v & 0x8000 ? 1 : 0; + if (n) + X = (Y * mult) / ((1<<(((~N)&0xf)+1))) ; + else + X = Y * mult * (N=(1<<(N&0xf))); + return X; +} +/* + * This will be called to intiialize the thermali subsystem. + */ +int +onlp_thermali_init(void) +{ + return ONLP_STATUS_OK; +} + +/* + * Retrieve the information structure for the given thermal OID. + * + * If the OID is invalid, return ONLP_E_STATUS_INVALID. + * If an unexpected error occurs, return ONLP_E_STATUS_INTERNAL. + * Otherwise, return ONLP_STATUS_OK with the OID's information. + * + * Note -- it is expected that you fill out the information + * structure even if the sensor described by the OID is not present. + */ +static int +_onlp_thermali_info_get(int id, onlp_thermal_info_t* info) +{ + int len, nbytes = 10, temp_base=1, local_id; + uint8_t r_data[10] = {0}; + char fullpath[50] = {0}; + + local_id = id; + + DEBUG_PRINT("\n[Debug][%s][%d][local_id: %d]", __FUNCTION__, __LINE__, local_id); + + /* get fullpath */ + sprintf(fullpath, "%s%s", prefix_path, last_path[local_id]); + + onlp_file_read(r_data,nbytes,&len, fullpath); + + info->mcelsius =ONLPLIB_ATOI((char*)r_data) / temp_base; + + DEBUG_PRINT("\n[Debug][%s][%d][save data: %d]\n", __FUNCTION__, __LINE__, info->mcelsius); + + return ONLP_STATUS_OK; +} + +static int +_onlp_thermali_psu_info_get(int id, onlp_thermal_info_t* info) +{ + int psu_present,psu_good; + int psu_id,local_id; + int r_data,temperature_v; + enum ag6248c_product_id pid; + + local_id=id; + + DEBUG_PRINT("\n[Debug][%s][%d][local_id: %d]", __FUNCTION__, __LINE__, local_id); + + psu_id=(local_id-THERMAL_1_ON_PSU1)+1; + pid=get_product_id(); + //if the psu is not, directly to return + psu_present=psu_status_info_get(psu_id, "present"); + psu_good=psu_status_info_get(psu_id, "good"); + if((psu_present<=0)||(psu_good<=0)){ + info->status &= ~ONLP_THERMAL_STATUS_PRESENT; + return ONLP_STATUS_OK; + } + //read the pus temperture register value + if(pid == PID_AG6248C_48){ + if(psu_id==1) + r_data=i2c_devname_read_word("PSU1_PMBUS", 0x8d); + else + r_data=i2c_devname_read_word("PSU2_PMBUS", 0x8d); + } + else{ + if(psu_id==1) + r_data=i2c_devname_read_word("PSU1_PMBUS_POE", 0x8d); + else + r_data=i2c_devname_read_word("PSU2_PMBUS_POE", 0x8d); + } + if(r_data<0) + return ONLP_STATUS_E_INVALID; + //get the real temperture value + temperature_v=_onlp_psu_thermali_val_to_temperature(r_data,1000); + + info->mcelsius=temperature_v; + + DEBUG_PRINT("\n[Debug][%s][%d][save data: %d]\n", __FUNCTION__, __LINE__, info->mcelsius); + + return ONLP_STATUS_OK; + +} + +int +onlp_thermali_info_get(onlp_oid_t id, onlp_thermal_info_t* info) +{ + int rc; + int local_id; + + VALIDATE(id); + + local_id=ONLP_OID_ID_GET(id); + + /* Set the onlp_oid_hdr_t and capabilities */ + *info = linfo[local_id]; + + if((local_id==THERMAL_1_CLOSE_TO_MAC) || (local_id==THERMAL_2_CLOSE_TO_PHY)) + rc= _onlp_thermali_info_get(local_id,info); + else if((local_id==THERMAL_1_ON_PSU1) || (local_id==THERMAL_1_ON_PSU2)) + rc=_onlp_thermali_psu_info_get(local_id,info); + else{ + rc=ONLP_STATUS_E_INVALID; + } + return rc; +} + + + diff --git a/packages/platforms/delta/armel/modules/Makefile b/packages/platforms/delta/armel/modules/Makefile new file mode 100644 index 00000000..003238cf --- /dev/null +++ b/packages/platforms/delta/armel/modules/Makefile @@ -0,0 +1 @@ +include $(ONL)/make/pkg.mk \ No newline at end of file diff --git a/packages/platforms/delta/armel/modules/PKG.yml b/packages/platforms/delta/armel/modules/PKG.yml new file mode 100644 index 00000000..e73b86da --- /dev/null +++ b/packages/platforms/delta/armel/modules/PKG.yml @@ -0,0 +1 @@ +!include $ONL_TEMPLATES/no-arch-vendor-modules.yml ARCH=armel VENDOR=delta