diff --git a/packages/base/any/kernels/4.14-lts/patches/drivers-i2c-busses-xgs_iproc_smbus-clk-freq.patch b/packages/base/any/kernels/4.14-lts/patches/drivers-i2c-busses-xgs_iproc_smbus-clk-freq.patch
new file mode 100644
index 00000000..3042bbd9
--- /dev/null
+++ b/packages/base/any/kernels/4.14-lts/patches/drivers-i2c-busses-xgs_iproc_smbus-clk-freq.patch
@@ -0,0 +1,86 @@
+diff -urpN a/drivers/i2c/busses/xgs_iproc_smbus.c b/drivers/i2c/busses/xgs_iproc_smbus.c
+--- a/drivers/i2c/busses/xgs_iproc_smbus.c	2018-12-17 15:00:29.412457650 +0000
++++ b/drivers/i2c/busses/xgs_iproc_smbus.c	2018-12-17 15:01:26.255275662 +0000
+@@ -52,6 +52,8 @@
+                                                       (regval & ~(mask)) | \
+                                                       ((fldval) << (startbit))
+ 
++//#define IPROC_SMB_DBG 1
++
+ typedef enum iproc_smb_clk_freq {
+ 	I2C_SPEED_100KHz = 0,
+ 	I2C_SPEED_400KHz = 1,
+@@ -178,7 +180,7 @@ static int iproc_smb_set_clk_freq(void _
+ 	SETREGFLDVAL(regval, val, CCB_SMB_TIMGCFG_MODE400_MASK,
+ 			CCB_SMB_TIMGCFG_MODE400_SHIFT);
+ 	writel(regval, base_addr + CCB_SMB_TIMGCFG_REG);
+-
++	
+ 	return 0;
+ }
+ 
+@@ -208,9 +210,20 @@ static int iproc_smbus_block_init(struct
+ 	udelay(100);
+ 
+ 	/* Set default clock frequency */
+-	if (of_property_read_u32(dn, "clock-frequency", &i2c_clk_freq))
+-		/*no property available, use default: 100KHz*/
+-		i2c_clk_freq = I2C_SPEED_100KHz;
++        if (of_property_read_u32(dn, "clock-frequency", &i2c_clk_freq)) {
++            /*no property available, use default: 100KHz*/
++            i2c_clk_freq = 100000;
++        }
++
++/* Edgecore patch */
++        if (i2c_clk_freq == 400000) {
++            dev_info(dev->dev, "bus set to %u Hz\n", i2c_clk_freq);
++            i2c_clk_freq = I2C_SPEED_400KHz;
++        } else {
++            dev_info(dev->dev, "bus set to %u Hz\n", 100000);
++            i2c_clk_freq = I2C_SPEED_100KHz;
++        }
++      
+ 	iproc_smb_set_clk_freq(base_addr, i2c_clk_freq);
+ 
+ 	/* Disable intrs */
+@@ -577,7 +590,9 @@ static int iproc_smb_data_send(struct i2
+ 
+ 		if (regval != MSTR_STS_XACT_SUCCESS) {
+ 			/* We can flush Tx FIFO here */
++#ifdef IPROC_SMB_DBG
+ 			dev_err(dev->dev, "Send: Error in transaction\n");
++#endif
+ 			return -EREMOTEIO;
+ 		}
+ 	}
+@@ -662,7 +677,9 @@ static int iproc_smb_data_recv(struct i2
+ 
+ 		if (regval != MSTR_STS_XACT_SUCCESS) {
+ 			/* We can flush Tx FIFO here */
++#ifdef IPROC_SMB_DBG
+ 			dev_info(dev->dev, "Error in transaction\n");
++#endif
+ 			return -EREMOTEIO;
+ 		}
+ 	}
+@@ -840,8 +857,10 @@ static int iproc_smb_xfer(struct i2c_ada
+ 		}
+        
+ 		if (rc < 0) {
++#ifdef IPROC_SMB_DBG
+ 			dev_info(dev->dev, "%s error accessing\n",
+ 			    (read_write == I2C_SMBUS_READ) ? "Read" : "Write");
++#endif
+ 			up(&dev->xfer_lock);
+ 			return -EREMOTEIO;
+ 		}
+@@ -856,7 +875,8 @@ static int iproc_smb_xfer(struct i2c_ada
+ 		}
+ 	}
+ 
+-	msleep(1);	
++	/* Edge-core comments out the sleep to speed up EEPROM dump */
++	//msleep(1);	
+ 	up(&dev->xfer_lock);
+ 
+ 	return (rc);
diff --git a/packages/base/any/kernels/4.14-lts/patches/drivers-usb-phy-phy-xgs-iproc-usb-phy-mode.patch b/packages/base/any/kernels/4.14-lts/patches/drivers-usb-phy-phy-xgs-iproc-usb-phy-mode.patch
new file mode 100644
index 00000000..56cc0e8b
--- /dev/null
+++ b/packages/base/any/kernels/4.14-lts/patches/drivers-usb-phy-phy-xgs-iproc-usb-phy-mode.patch
@@ -0,0 +1,26 @@
+diff -urpN a/drivers/usb/phy/phy-xgs-iproc.c b/drivers/usb/phy/phy-xgs-iproc.c
+--- a/drivers/usb/phy/phy-xgs-iproc.c	2018-12-17 14:49:55.121649311 +0000
++++ b/drivers/usb/phy/phy-xgs-iproc.c	2018-12-17 14:50:06.529412019 +0000
+@@ -161,12 +161,22 @@ static int xgs_iproc_usb_phy_mode(struct
+ 	int usb_mode = IPROC_USB_MODE_HOST;
+ 	u32 __maybe_unused val;
+ 	int __maybe_unused gpio_pin, ret;
++        const char *phy_mode_str;
+ 
+ 	if (!wrap_base)
+ 		dev_warn(dev, "no wrap base addr");
+ 
+ 	if (of_device_is_compatible(dn, "brcm,usb-phy-hx4") ||
+ 		of_device_is_compatible(dn, "brcm,usb-phy-kt2")) {
++
++                /* Edge-core patch: use "usb-phy-mode" in dts to decide host/device mode */
++                if (!of_property_read_string(dn, "usb-phy-mode", &phy_mode_str)) {
++                        if (!strcasecmp(phy_mode_str, "host"))
++                                return IPROC_USB_MODE_HOST;
++                        if (!strcasecmp(phy_mode_str, "device"))
++                                return IPROC_USB_MODE_DEVICE;
++                }
++
+ 		/* gpio pin 4 to control host/device mode */
+ 		gpio_pin = of_get_named_gpio(dev->of_node, "usbdev-gpio", 0);
+ 
diff --git a/packages/base/any/kernels/4.14-lts/patches/series b/packages/base/any/kernels/4.14-lts/patches/series
index 84d94c99..365505b3 100644
--- a/packages/base/any/kernels/4.14-lts/patches/series
+++ b/packages/base/any/kernels/4.14-lts/patches/series
@@ -1,3 +1,5 @@
 brcm-iproc-4.14.patch
+drivers-usb-phy-phy-xgs-iproc-usb-phy-mode.patch
+drivers-i2c-busses-xgs_iproc_smbus-clk-freq.patch
 0001-drivers-i2c-muxes-pca954x-deselect-on-exit.patch
 0002-driver-support-intel-igb-bcm5461S-phy.patch