# Pull Request Template
## Description
**This PR includes,**
- Added new pending FAQs view with approve/edit/delete actions for each
response.
- Implemented banner notification showing pending FAQ count on main
approved responses page.
- Created dedicated route for pending FAQs review at
/captain/responses/pending.
- Added automatic pending count updates when switching assistants or
routes.
- Modified ResponseCard component to show action buttons instead of
dropdown in pending view.
Fixes
https://linear.app/chatwoot/issue/CW-5833/pending-faqs-in-a-different-ux
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Loom video
https://www.loom.com/share/5fe8f79b04cd4681b9360c48710b9373
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Pranav <pranav@chatwoot.com>
### Problem
WhatsApp Cloud channels already handle Brazil/Argentina phone number
format mismatches (PRs #12492, #11173), but Twilio WhatsApp channels
were creating duplicate contacts
when:
- Template sent to new format: `whatsapp:+5541988887777` (13 digits)
- User responds from old format: `whatsapp:+554188887777` (12 digits)
### Solution
The solution extends the existing phone number normalization
infrastructure to support both WhatsApp providers while handling their
different payload formats:
### Provider Format Differences
- **WhatsApp Cloud**: `wa_id: "919745786257"` (clean number)
- **Twilio WhatsApp**: `From: "whatsapp:+919745786257"` (prefixed
format)
### Test Coverage
#### Brazil Phone Number Tests
**Case 1: New Format (13 digits with "9")**
- **Test 1**: No existing contact → Creates new contact with original
format
- **Test 2**: Contact exists in same format → Appends to existing
conversation
**Case 2: Old Format (12 digits without "9")**
- **Test 3**: Contact exists in old format → Appends to existing
conversation
- **Test 4** *(Critical)*: Contact exists in new format, message in old
format → Finds existing contact, prevents duplicate
- **Test 5**: No contact exists → Creates new contact with incoming
format
#### Argentina Phone Number Tests
**Case 3: With "9" after country code**
- **Test 6**: No existing contact → Creates new contact
- **Test 7**: Contact exists in normalized format → Uses existing
contact
**Case 4: Without "9" after country code**
- **Test 8**: Contact exists in same format → Appends to existing
- **Test 9**: No contact exists → Creates new contact
Fixes
https://linear.app/chatwoot/issue/CW-5565/inconsistencies-for-mobile-numbersargentina-brazil-and-mexico-numbers
# Pull Request Template
## Description
This PR introduces a new changelog component that can be used in the
sidebar.
Fixes
https://linear.app/chatwoot/issue/CW-5776/changelog-card-ui-component
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Screencast
https://github.com/user-attachments/assets/42e77e82-388a-4fc9-9b37-f3d0ea1a9d7f
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Muhsin <muhsinkeramam@gmail.com>
# Pull Request Template
## Description
This PR enables active tabs in inbox settings to persist in the URL for
easy sharing.
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Loom video
https://www.loom.com/share/63820ecb17ea491a9082339f8bb457b6?sid=4fef1acd-b4fd-431f-855c-7647015a330f
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Muhsin <muhsinkeramam@gmail.com>
# Pull Request Template
## Description
This PR enables URL-based search and tab selection, allowing search
queries and active tabs to persist in the URL for easy sharing.
Fixes
[CW-5766](https://linear.app/chatwoot/issue/CW-5766/cannot-impersonate-an-account),
https://github.com/chatwoot/chatwoot/issues/12623
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Loom video
https://www.loom.com/share/422a1d61f3fe4278a88e352ef98d2b78?sid=35fabee7-652f-4e17-83bd-e066a3bb804c
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
We should avoid using margins to define space between elements, instead
use the gap utility.
The problem with this particular instance was that if Google auth was
turned off and SSO is available, there is a weird spacing at the top
caused by the margin from the SSO element.
This PR will fix that. It also introduces a gap between the divider and
the button, but that should be okay.
# Pull Request Template
## Description
This PR removes the frame containing all channel icons from the “Create
Inbox” page.
## Type of change
- [x] Bug fix (non-breaking change which fixes an issue)
## How Has This Been Tested?
### Screenshots
**Before**
<img width="1314" height="1016" alt="image"
src="https://github.com/user-attachments/assets/2b773495-9ddb-48b4-b15d-9aef18259ce1"
/>
**After**
<img width="1314" height="979" alt="image"
src="https://github.com/user-attachments/assets/f4dc64cf-516c-4faf-a45c-2f7de05cc29b"
/>
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
## Context
Sidekiq logs only showed the Sidekiq wrapper class and JID, which wasn’t
helpful when debugging ActiveJobs.
## Changes
- Updated `ChatwootDequeuedLogger` to log the actual `ActiveJob class`
and `job_id` instead of the generic Sidekiq wrapper and JID.
> Example
> ```
> Dequeued ActionMailer::MailDeliveryJob
123e4567-e89b-12d3-a456-426614174000 from default
> ```
- Remove sidekiq worker and unify everything to `ActiveJob`
Previously, email replies were handled inside workers. There was no
execution logs. This meant if emails silently failed (as reported by a
customer), we had no way to trace where the issue happened, the only
assumption was “no error = mail sent.”
By moving email handling into jobs, we now have proper execution logs
for each attempt. This makes it easier to debug delivery issues and
would have better visibility when investigating customer reports.
Fixes
https://linear.app/chatwoot/issue/CW-5538/emails-are-not-sentdelivered-to-the-contact
---------
Co-authored-by: Sojan Jose <sojan@pepalo.com>
Co-authored-by: Shivam Mishra <scm.mymail@gmail.com>
This PR collapses multiple queries fetching stats from a single table to
a single query
```sql
SELECT
user_id as user_id,
COUNT(CASE WHEN name = 'conversation_resolved' THEN 1 END) as resolved_count,
AVG(CASE WHEN name = 'conversation_resolved' THEN value END) as avg_resolution_time,
AVG(CASE WHEN name = 'first_response' THEN value END) as avg_first_response_time,
AVG(CASE WHEN name = 'reply_time' THEN value END) as avg_reply_time
FROM "reporting_events"
WHERE
"reporting_events"."account_id" = <account_id> AND
"reporting_events"."created_at" >= '2025-09-14 18:30:00' AND
"reporting_events"."created_at" < '2025-10-14 18:29:59'
GROUP BY "reporting_events"."user_id";
```
### Why this works?
Here's why this optimization is faster based on PostgreSQL internals:
- Single Table Scan vs Multiple Scans: Earlier we did 4 sequential scans
(or 4 index scans) of the same data, with the same where clause, now in
a single scan all 4 `CASE` expressions are evaluated in a single pass.
- Shared Buffer Cache Efficiency: PostgreSQL's shared buffer cache
stores recently accessed pages, with this, pages are loaded once and
re-used for all aggregation, earlier with separate queries we were
forced to re-read all from the disk each time
- Reduced planning and network overhead (4 vs 1 query)
### How is it tested
1. The specs all pass without making any changes
2. Verified the reports side by side after generating from report seeder
#### How to test
Generate seed data using the following command
```bash
ACCOUNT_ID=1 ENABLE_ACCOUNT_SEEDING=true bundle exec rake db:seed:reports_data
```
Once done download the reports, checkout to this branch and download the
reports again and compare them
This PR adds inbox filtering to the conversation traffic heatmap,
allowing users to analyze patterns for specific inboxes. Additionally,
it also adds a new resolution count heatmap that shows when support
teams are most active in resolving conversations, using a green color to
distinguish it from the blue conversation heatmap.
The PR also reorganizes heatmap components into a cleaner structure with
a shared `BaseHeatmapContainer` that handles common functionality like
date range selection, inbox filtering, and data fetching. This makes it
easy to add new heatmap metrics in the future - just create a wrapper
component specifying the metric type and color scheme.
<img width="1926" height="1670" alt="CleanShot 2025-10-13 at 14 01
35@2x"
src="https://github.com/user-attachments/assets/67822a34-6170-4d19-9e11-7ad4ded5c388"
/>
<img width="1964" height="1634" alt="CleanShot 2025-10-13 at 14 03
00@2x"
src="https://github.com/user-attachments/assets/e4613c08-64b8-4fa6-91d8-7510946dd75d"
/>
Unrelated change, the data seeder conversation resolution would not work
correctly, we've fixed it.
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
## Changelog
- Added conditional Active Record encryption to every external
credential we store (SMTP/IMAP passwords, Twilio tokens,
Slack/OpenAI hook tokens, Facebook/Instagram tokens, LINE/Telegram keys,
Twitter secrets) so new writes are encrypted
whenever Chatwoot.encryption_configured? is true; legacy installs still
receive plaintext until their secrets are
updated.
- Tuned encryption settings in config/application.rb to allow legacy
reads (support_unencrypted_data) and to extend
deterministic queries so lookups continue to match plaintext rows during
the rollout; added TODOs to retire the
fallback once encryption becomes mandatory.
- Introduced an MFA-pipeline test suite
(spec/models/external_credentials_encryption_spec.rb) plus shared
examples to
verify each attribute encrypts at rest and that plaintext records
re-encrypt on update, with a dedicated Telegram case.
The existing MFA GitHub workflow now runs these tests using the
preconfigured encryption keys.
fixes:
https://linear.app/chatwoot/issue/CW-5453/encrypt-sensitive-credentials-stored-in-plain-text-in-database
## Testing Instructions
1. Instance without encryption keys
- Unset ACTIVE_RECORD_ENCRYPTION_* vars (or run in an environment where
they’re absent).
- Create at least one credentialed channel (e.g., Email SMTP).
- Confirm workflows still function (send/receive mail or a similar
sanity check).
- In the DB you should still see plaintext values—this confirms the
guard prevents encryption when keys are missing.
2. Instance with encryption keys
- Configure the three encryption env vars and restart.
- Pick a couple of representative integrations (e.g., Email SMTP +
Twilio SMS).
- Legacy channel check:
- Use existing records created before enabling keys. Trigger their
workflow (send an email / SMS, or hit the
webhook) to ensure they still authenticate.
- Inspect the raw column—value remains plaintext until changed.
- Update legacy channel:
- Edit one legacy channel’s credential (e.g., change SMTP password).
- Verify the operation still works and the stored value is now encrypted
(raw column differs, accessor returns
original).
- New channel creation:
- Create a new channel of the same type; confirm functionality and that
the stored credential is encrypted from
the start.
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
# Changelog
When an agent bot webhook fails, we now flip any pending conversation
back to an open state so a human agent can pick
it up immediately. There will be an clear activity message giving the
team clear visibility into what went
wrong. This keeps customers from getting stuck in limbo when their
connected bot goes offline.
# Testing instructions
1. Initial setup: Create an agent bot with a working webhook URL and
connect it to a test inbox. Send a message from a
contact (e.g., via the widget) so a conversation is created; it should
enter the Pending state while the bot handles
the reply.
2. Introduce failure: Edit that agent bot and swap the webhook URL for a
dummy endpoint that will fail. Have the same
contact send another message in the existing conversation. Because the
webhook call now fails, the conversation should flip from Pending back
to Open, making it visible to agents. Also verify the activity message
3. New conversation check: With the dummy URL still in place, start a
brand-new conversation from a contact. When the
bot tries (and fails) to respond, confirm that the conversation appears
immediately as Open rather than remaining Pending. Also the activity
message is visible
4. Subsequent messages in open conversations will show no change
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
# Pull Request Template
## Description
This PR includes billing page improvements with the following updates:
### Self-hosted Users
* Automatically redirected to the dashboard when accessing the billing
page.
### Cloud Users – No Billing Plan (First Visit)
* Shows a loading spinner with the `Your billing account is being
configured. Please refresh the page and try again.` message.
* Automatically refreshes the page after 5 seconds to check for billing
setup.
### Cloud Users – No Billing Plan (After Refresh)
* Prevents infinite refresh loops using `sessionStorage` tracking.
* Displays the standard `Your billing account is being configured.
Please refresh the page and try again.` message without further refresh
attempts.
* Cleans up session flags for future visits.
### Cloud Users – With Billing Plan
* Displays the existing billing page normally with no refresh or
redirection logic.
Fixes
https://linear.app/chatwoot/issue/CW-5559/your-billing-page-is-being-set-up-message-on-billing-page-is-confusing
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Loom video
https://www.loom.com/share/d0ea13d6b90b4ab1acbc581b524f6382?sid=d3dd19f3-85aa-4127-9233-7eecb1be0884
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
This PR fixes a bug came from assuming the old null check only mattered
for the `is_not_present` filter.
The fix keeps `not_equal_to` working but lets each operator decide what
to do with `null`. Presence filters look at a shared `isNullish` flag,
text filters still rely on `contains`, and date filters skip
conversations with no timestamp. The new spec covers the null-assignee
scenario for both `equal_to` and `not_equal_to` so we don’t miss this
again.
Changes searchkick callback behavior to check `should_index?` before
creating reindex jobs, preventing unnecessary job creation for messages
that don't need indexing (activity messages, unpaid accounts, etc.).
Previously, `callbacks: :async` created reindex jobs for all messages
(~5,100/min or 7.3M/day in production), which were then filtered by
`should_index?` inside the job worker - resulting in 98% wasted jobs,
Redis memory pressure, and avoidable p0 alerts.
Now, `should_index?` is checked before job creation via `after_commit`
callback, reducing job creation to actual incoming/outgoing messages
from paid accounts.
Changes:
- Disable automatic searchkick callbacks
- Add manual `after_commit` callback with `should_index?` condition
- Add specs to verify callback behavior
Expected impact:
- 98% reduction in sidekiq job creation (~7.3M → ~150K jobs/day)
- Reduced redis memory usage
- Same async indexing behavior for eligible messages
# Pull Request Template
## Description
* add Company model with validations for name, domain, description and
avatar
* Add database migration fo
* Implement endpoints for company CRUD operations
* Add optional company relationship for contacts
* Add test for models, controllers, factories and policies
* Add authorization policies restricting delete to admins
* support JSON API responses
Please include a summary of the change and issue(s) fixed. Also, mention
relevant motivation, context, and any dependencies that this change
requires.
Fixes #(cw-5650)
## Type of change
Please delete options that are not relevant.
- [x] Bug fix (non-breaking change which fixes an issue)
- [ ] New feature (non-breaking change which adds functionality)
- [ ] Breaking change (fix or feature that would cause existing
functionality not to work as expected)
- [ ] This change requires a documentation update
## How Has This Been Tested?
Tests are implemented using `RSpec`
```
$ bundle exec rails db:migrate
$ bundle exec rspec spec/models/company_spec.rb spec/controllers/api/v1/accounts/companies_controller_spec.rb
```
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [x] I have added tests that prove my fix is effective or that my
feature works
- [ ] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
# Pull Request Template
## Description
This PR fixes the following error:
`I18n::MissingInterpolationArgument: missing interpolation argument
:assignee_name in "Asignado a %{assignee_name} por %{user_name}"
({user_name: "Marketing Telpronet"} given)
(I18n::MissingInterpolationArgument)`
**Issue**
In the Spanish locale, an `I18n::MissingInterpolationArgument` error
occurred during bulk assignee operations.
This happened because `assignee&.name` was returning `nil`, and the
`.compact` method removed the `assignee_name` key entirely from the
params.
<img width="1744" height="164" alt="image"
src="https://github.com/user-attachments/assets/3c15ed77-48c0-4938-a7fd-356bdb07da39"
/>
**Solution**
* Always include the `assignee_name` key with an empty string (`''`)
when its value is `nil`.
* Removed the `.compact` method call to ensure the interpolation key is
always present.
Fixes
https://linear.app/chatwoot/issue/CW-5747/i18nmissinginterpolationargument-missing-interpolation-argument
## Type of change
- [x] Bug fix (non-breaking change which fixes an issue)
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
This PR fixes URL parsing errors when WhatsApp template parameters
contain URLs with spaces or special characters. The solution adds proper
URL normalization using Addressable::URI before validation, which
automatically handles space encoding and special character
normalization.
Related with https://github.com/chatwoot/chatwoot/pull/12462
## Type of change
- [x] Bug fix (non-breaking change which fixes an issue)
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [x] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [x] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [x] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
# Pull Request Template
## Description
This PR increases the custom filter limit from 50 to 1000 per user
## Type of change
- [x] Bug fix (non-breaking change which fixes an issue)
## How Has This Been Tested?
### Screenshot
<img width="1264" height="71" alt="image"
src="https://github.com/user-attachments/assets/e12667bb-147c-4115-b8a8-9113fca471db"
/>
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [x] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
# Pull Request Template
## Description
Please include a summary of the change and issue(s) fixed. Also, mention
relevant motivation, context, and any dependencies that this change
requires.
Fixes # (issue)
## Type of change
Please delete options that are not relevant.
- [ ] Bug fix (non-breaking change which fixes an issue)
- [ ] New feature (non-breaking change which adds functionality)
- [ ] Breaking change (fix or feature that would cause existing
functionality not to work as expected)
- [ ] This change requires a documentation update
## How Has This Been Tested?
Please describe the tests that you ran to verify your changes. Provide
instructions so we can reproduce. Please also list any relevant details
for your test configuration.
## Checklist:
- [ ] My code follows the style guidelines of this project
- [ ] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [ ] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [ ] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
Fixes
https://linear.app/chatwoot/issue/CW-5692/whatsapp-es-numbers-stuck-in-pending-due-to-premature-registration
### Problem
Multiple customers reported that their WhatsApp numbers remain stuck in
**Pending** in WhatsApp Manager even after successful onboarding.
- Our system triggers a **registration call**
(`/<PHONE_NUMBER_ID>/register`) as soon as the number is OTP verified.
- In many cases, Meta hasn’t finished **display name
review/provisioning**, so the call fails with:
```
code: 100, error_subcode: 2388001
error_user_title: "Cannot Create Certificate"
error_user_msg: "Your display name could not be processed. Please edit
your display name and try again."
```
- This leaves the number stuck in Pending, no messaging can start until
we manually retry registration.
- Some customers have reported being stuck in this state for **7+
days**.
### Root cause
- We only check `code_verification_status = VERIFIED` before attempting
registration.
- We **don’t wait** for display name provisioning (`name_status` /
`platform_type`) to be complete.
- As a result, registration fails prematurely and the number never
transitions out of Pending.
### Solution
#### 1. Health Status Monitoring
- Build a backend service to fetch **real-time health data** from Graph
API:
- `code_verification_status`
- `name_status` / `display_name_status`
- `platform_type`
- `throughput.level`
- `messaging_limit_tier`
- `quality_rating`
- Expose health data via API
(`/api/v1/accounts/:account_id/inboxes/:id/health`).
- Display this in the UI as an **Account Health tab** with clear badges
and direct links to WhatsApp Manager.
#### 2. Smarter Registration Logic
- Update `WebhookSetupService` to include a **dual-condition check**:
- Register if:
1. Phone is **not verified**, OR
2. Phone is **verified but provisioning incomplete** (`platform_type =
NOT_APPLICABLE`, `throughput.level = NOT_APPLICABLE`).
- Skip registration if number is already provisioned.
- Retry registration automatically when stuck.
- Provide a UI banner with complete registration button so customers can
retry without manual support.
### Screenshot
<img width="2292" height="1344" alt="CleanShot 2025-09-30 at 16 01
03@2x"
src="https://github.com/user-attachments/assets/1c417d2a-b11c-475e-b092-3c5671ee59a7"
/>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Sivin Varghese <64252451+iamsivin@users.noreply.github.com>
Fixes https://github.com/chatwoot/chatwoot/issues/10914
# Pull Request Template
## Description
Please include a summary of the change and issue(s) fixed. Also, mention
relevant motivation, context, and any dependencies that this change
requires.
Fixes # (issue)
## Type of change
Please delete options that are not relevant.
- [x] Bug fix (non-breaking change which fixes an issue)
- [x] New feature (non-breaking change which adds functionality)
- [] Breaking change (fix or feature that would cause existing
functionality not to work as expected)
- [ ] This change requires a documentation update
## How Has This Been Tested?
Please describe the tests that you ran to verify your changes. Provide
instructions so we can reproduce. Please also list any relevant details
for your test configuration.
## Checklist:
- [x ] My code follows the style guidelines of this project
- [ ] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [ ] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [ ] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
Co-authored-by: Sivin Varghese <64252451+iamsivin@users.noreply.github.com>
Co-authored-by: iamsivin <iamsivin@gmail.com>
# Pull Request Template
## Description
This PR adds a password visibility toggle to the auth form input
component.
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## How Has This Been Tested?
### Screencast
https://github.com/user-attachments/assets/17652e86-e823-46e6-a3ba-80af37c78906
## Checklist:
- [x] My code follows the style guidelines of this project
- [x] I have performed a self-review of my code
- [ ] I have commented on my code, particularly in hard-to-understand
areas
- [ ] I have made corresponding changes to the documentation
- [x] My changes generate no new warnings
- [ ] I have added tests that prove my fix is effective or that my
feature works
- [x] New and existing unit tests pass locally with my changes
- [ ] Any dependent changes have been merged and published in downstream
modules
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
