update vendor pkg to support azure disk provisioning

Signed-off-by: Huamin Chen <hchen@redhat.com>

vendor/github.com/Azure/azure-sdk-for-go/arm/storage/accounts.go

@@ -0,0 +1,644 @@
+package storage
+
+// Copyright (c) Microsoft and contributors.  All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Code generated by Microsoft (R) AutoRest Code Generator 0.17.0.0
+// Changes may cause incorrect behavior and will be lost if the code is
+// regenerated.
+
+import (
+	"github.com/Azure/go-autorest/autorest"
+	"github.com/Azure/go-autorest/autorest/azure"
+	"net/http"
+)
+
+// AccountsClient is the the Storage Management Client.
+type AccountsClient struct {
+	ManagementClient
+}
+
+// NewAccountsClient creates an instance of the AccountsClient client.
+func NewAccountsClient(subscriptionID string) AccountsClient {
+	return NewAccountsClientWithBaseURI(DefaultBaseURI, subscriptionID)
+}
+
+// NewAccountsClientWithBaseURI creates an instance of the AccountsClient
+// client.
+func NewAccountsClientWithBaseURI(baseURI string, subscriptionID string) AccountsClient {
+	return AccountsClient{NewWithBaseURI(baseURI, subscriptionID)}
+}
+
+// CheckNameAvailability checks that account name is valid and is not in use.
+//
+// accountName is the name of the storage account within the specified
+// resource group. Storage account names must be between 3 and 24 characters
+// in length and use numbers and lower-case letters only.
+func (client AccountsClient) CheckNameAvailability(accountName AccountCheckNameAvailabilityParameters) (result CheckNameAvailabilityResult, err error) {
+	req, err := client.CheckNameAvailabilityPreparer(accountName)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", nil, "Failure preparing request")
+	}
+
+	resp, err := client.CheckNameAvailabilitySender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure sending request")
+	}
+
+	result, err = client.CheckNameAvailabilityResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// CheckNameAvailabilityPreparer prepares the CheckNameAvailability request.
+func (client AccountsClient) CheckNameAvailabilityPreparer(accountName AccountCheckNameAvailabilityParameters) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsJSON(),
+		autorest.AsPost(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/checkNameAvailability", pathParameters),
+		autorest.WithJSON(accountName),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// CheckNameAvailabilitySender sends the CheckNameAvailability request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) CheckNameAvailabilitySender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// CheckNameAvailabilityResponder handles the response to the CheckNameAvailability request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) CheckNameAvailabilityResponder(resp *http.Response) (result CheckNameAvailabilityResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// Create asynchronously creates a new storage account with the specified
+// parameters. If an account is already created and subsequent create request
+// is issued with different properties, the account properties will be
+// updated. If an account is already created and subsequent create or update
+// request is issued with exact same set of properties, the request will
+// succeed. This method may poll for completion. Polling can be canceled by
+// passing the cancel channel argument. The channel will be used to cancel
+// polling and any outstanding HTTP requests.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription. accountName is the name of the storage account within the
+// specified resource group. Storage account names must be between 3 and 24
+// characters in length and use numbers and lower-case letters only.
+// parameters is the parameters to provide for the created account.
+func (client AccountsClient) Create(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (result autorest.Response, err error) {
+	req, err := client.CreatePreparer(resourceGroupName, accountName, parameters, cancel)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", nil, "Failure preparing request")
+	}
+
+	resp, err := client.CreateSender(req)
+	if err != nil {
+		result.Response = resp
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure sending request")
+	}
+
+	result, err = client.CreateResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// CreatePreparer prepares the Create request.
+func (client AccountsClient) CreatePreparer(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsJSON(),
+		autorest.AsPut(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
+		autorest.WithJSON(parameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{Cancel: cancel})
+}
+
+// CreateSender sends the Create request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) CreateSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client,
+		req,
+		azure.DoPollForAsynchronous(client.PollingDelay))
+}
+
+// CreateResponder handles the response to the Create request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) CreateResponder(resp *http.Response) (result autorest.Response, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusAccepted, http.StatusOK),
+		autorest.ByClosing())
+	result.Response = resp
+	return
+}
+
+// Delete deletes a storage account in Microsoft Azure.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription. accountName is the name of the storage account within the
+// specified resource group. Storage account names must be between 3 and 24
+// characters in length and use numbers and lower-case letters only.
+func (client AccountsClient) Delete(resourceGroupName string, accountName string) (result autorest.Response, err error) {
+	req, err := client.DeletePreparer(resourceGroupName, accountName)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", nil, "Failure preparing request")
+	}
+
+	resp, err := client.DeleteSender(req)
+	if err != nil {
+		result.Response = resp
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure sending request")
+	}
+
+	result, err = client.DeleteResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// DeletePreparer prepares the Delete request.
+func (client AccountsClient) DeletePreparer(resourceGroupName string, accountName string) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsDelete(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// DeleteSender sends the Delete request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) DeleteSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// DeleteResponder handles the response to the Delete request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
+		autorest.ByClosing())
+	result.Response = resp
+	return
+}
+
+// GetProperties returns the properties for the specified storage account
+// including but not limited to name, account type, location, and account
+// status. The ListKeys operation should be used to retrieve storage keys.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription. accountName is the name of the storage account within the
+// specified resource group. Storage account names must be between 3 and 24
+// characters in length and use numbers and lower-case letters only.
+func (client AccountsClient) GetProperties(resourceGroupName string, accountName string) (result Account, err error) {
+	req, err := client.GetPropertiesPreparer(resourceGroupName, accountName)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", nil, "Failure preparing request")
+	}
+
+	resp, err := client.GetPropertiesSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure sending request")
+	}
+
+	result, err = client.GetPropertiesResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// GetPropertiesPreparer prepares the GetProperties request.
+func (client AccountsClient) GetPropertiesPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsGet(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// GetPropertiesSender sends the GetProperties request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) GetPropertiesSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// GetPropertiesResponder handles the response to the GetProperties request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) GetPropertiesResponder(resp *http.Response) (result Account, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// List lists all the storage accounts available under the subscription. Note
+// that storage keys are not returned; use the ListKeys operation for this.
+func (client AccountsClient) List() (result AccountListResult, err error) {
+	req, err := client.ListPreparer()
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "List", nil, "Failure preparing request")
+	}
+
+	resp, err := client.ListSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure sending request")
+	}
+
+	result, err = client.ListResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// ListPreparer prepares the List request.
+func (client AccountsClient) ListPreparer() (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsGet(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/storageAccounts", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// ListSender sends the List request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) ListSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// ListResponder handles the response to the List request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) ListResponder(resp *http.Response) (result AccountListResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// ListByResourceGroup lists all the storage accounts available under the
+// given resource group. Note that storage keys are not returned; use the
+// ListKeys operation for this.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription.
+func (client AccountsClient) ListByResourceGroup(resourceGroupName string) (result AccountListResult, err error) {
+	req, err := client.ListByResourceGroupPreparer(resourceGroupName)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", nil, "Failure preparing request")
+	}
+
+	resp, err := client.ListByResourceGroupSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure sending request")
+	}
+
+	result, err = client.ListByResourceGroupResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
+func (client AccountsClient) ListByResourceGroupPreparer(resourceGroupName string) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsGet(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) ListByResourceGroupResponder(resp *http.Response) (result AccountListResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// ListKeys lists the access keys for the specified storage account.
+//
+// resourceGroupName is the name of the resource group. accountName is the
+// name of the storage account.
+func (client AccountsClient) ListKeys(resourceGroupName string, accountName string) (result AccountListKeysResult, err error) {
+	req, err := client.ListKeysPreparer(resourceGroupName, accountName)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", nil, "Failure preparing request")
+	}
+
+	resp, err := client.ListKeysSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure sending request")
+	}
+
+	result, err = client.ListKeysResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// ListKeysPreparer prepares the ListKeys request.
+func (client AccountsClient) ListKeysPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsPost(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/listKeys", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// ListKeysSender sends the ListKeys request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) ListKeysSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// ListKeysResponder handles the response to the ListKeys request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) ListKeysResponder(resp *http.Response) (result AccountListKeysResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// RegenerateKey regenerates the access keys for the specified storage account.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription. accountName is the name of the storage account within the
+// specified resource group. Storage account names must be between 3 and 24
+// characters in length and use numbers and lower-case letters only.
+// regenerateKey is specifies name of the key which should be regenerated.
+// key1 or key2 for the default keys
+func (client AccountsClient) RegenerateKey(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (result AccountListKeysResult, err error) {
+	req, err := client.RegenerateKeyPreparer(resourceGroupName, accountName, regenerateKey)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", nil, "Failure preparing request")
+	}
+
+	resp, err := client.RegenerateKeySender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure sending request")
+	}
+
+	result, err = client.RegenerateKeyResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// RegenerateKeyPreparer prepares the RegenerateKey request.
+func (client AccountsClient) RegenerateKeyPreparer(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsJSON(),
+		autorest.AsPost(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/regenerateKey", pathParameters),
+		autorest.WithJSON(regenerateKey),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// RegenerateKeySender sends the RegenerateKey request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) RegenerateKeySender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// RegenerateKeyResponder handles the response to the RegenerateKey request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) RegenerateKeyResponder(resp *http.Response) (result AccountListKeysResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}
+
+// Update the update operation can be used to update the account type,
+// encryption, or tags for a storage account. It can also be used to map the
+// account to a custom domain. Only one custom domain is supported per
+// storage account and. replacement/change of custom domain is not supported.
+// In order to replace an old custom domain, the old value must be
+// cleared/unregistered before a new value may be set. Update of multiple
+// properties is supported. This call does not change the storage keys for
+// the account. If you want to change storage account keys, use the
+// regenerate keys operation.  The location and name of the storage account
+// cannot be changed after creation.
+//
+// resourceGroupName is the name of the resource group within the user's
+// subscription. accountName is the name of the storage account within the
+// specified resource group. Storage account names must be between 3 and 24
+// characters in length and use numbers and lower-case letters only.
+// parameters is the parameters to provide for the updated account.
+func (client AccountsClient) Update(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (result Account, err error) {
+	req, err := client.UpdatePreparer(resourceGroupName, accountName, parameters)
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", nil, "Failure preparing request")
+	}
+
+	resp, err := client.UpdateSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure sending request")
+	}
+
+	result, err = client.UpdateResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// UpdatePreparer prepares the Update request.
+func (client AccountsClient) UpdatePreparer(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"accountName":       autorest.Encode("path", accountName),
+		"resourceGroupName": autorest.Encode("path", resourceGroupName),
+		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsJSON(),
+		autorest.AsPatch(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
+		autorest.WithJSON(parameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// UpdateSender sends the Update request. The method will close the
+// http.Response Body if it receives an error.
+func (client AccountsClient) UpdateSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// UpdateResponder handles the response to the Update request. The method always
+// closes the http.Response Body.
+func (client AccountsClient) UpdateResponder(resp *http.Response) (result Account, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}

vendor/github.com/Azure/azure-sdk-for-go/arm/storage/client.go

@@ -0,0 +1,58 @@
+// Package storage implements the Azure ARM Storage service API version
+// 2016-01-01.
+//
+// The Storage Management Client.
+package storage
+
+// Copyright (c) Microsoft and contributors.  All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Code generated by Microsoft (R) AutoRest Code Generator 0.17.0.0
+// Changes may cause incorrect behavior and will be lost if the code is
+// regenerated.
+
+import (
+	"github.com/Azure/go-autorest/autorest"
+)
+
+const (
+	// APIVersion is the version of the Storage
+	APIVersion = "2016-01-01"
+
+	// DefaultBaseURI is the default URI used for the service Storage
+	DefaultBaseURI = "https://management.azure.com"
+)
+
+// ManagementClient is the base client for Storage.
+type ManagementClient struct {
+	autorest.Client
+	BaseURI        string
+	APIVersion     string
+	SubscriptionID string
+}
+
+// New creates an instance of the ManagementClient client.
+func New(subscriptionID string) ManagementClient {
+	return NewWithBaseURI(DefaultBaseURI, subscriptionID)
+}
+
+// NewWithBaseURI creates an instance of the ManagementClient client.
+func NewWithBaseURI(baseURI string, subscriptionID string) ManagementClient {
+	return ManagementClient{
+		Client:         autorest.NewClientWithUserAgent(UserAgent()),
+		BaseURI:        baseURI,
+		APIVersion:     APIVersion,
+		SubscriptionID: subscriptionID,
+	}
+}

vendor/github.com/Azure/azure-sdk-for-go/arm/storage/models.go

@@ -0,0 +1,295 @@
+package storage
+
+// Copyright (c) Microsoft and contributors.  All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Code generated by Microsoft (R) AutoRest Code Generator 0.17.0.0
+// Changes may cause incorrect behavior and will be lost if the code is
+// regenerated.
+
+import (
+	"github.com/Azure/go-autorest/autorest"
+	"github.com/Azure/go-autorest/autorest/date"
+)
+
+// AccessTier enumerates the values for access tier.
+type AccessTier string
+
+const (
+	// Cool specifies the cool state for access tier.
+	Cool AccessTier = "Cool"
+	// Hot specifies the hot state for access tier.
+	Hot AccessTier = "Hot"
+)
+
+// AccountStatus enumerates the values for account status.
+type AccountStatus string
+
+const (
+	// Available specifies the available state for account status.
+	Available AccountStatus = "Available"
+	// Unavailable specifies the unavailable state for account status.
+	Unavailable AccountStatus = "Unavailable"
+)
+
+// KeyPermission enumerates the values for key permission.
+type KeyPermission string
+
+const (
+	// FULL specifies the full state for key permission.
+	FULL KeyPermission = "FULL"
+	// READ specifies the read state for key permission.
+	READ KeyPermission = "READ"
+)
+
+// Kind enumerates the values for kind.
+type Kind string
+
+const (
+	// BlobStorage specifies the blob storage state for kind.
+	BlobStorage Kind = "BlobStorage"
+	// Storage specifies the storage state for kind.
+	Storage Kind = "Storage"
+)
+
+// ProvisioningState enumerates the values for provisioning state.
+type ProvisioningState string
+
+const (
+	// Creating specifies the creating state for provisioning state.
+	Creating ProvisioningState = "Creating"
+	// ResolvingDNS specifies the resolving dns state for provisioning state.
+	ResolvingDNS ProvisioningState = "ResolvingDNS"
+	// Succeeded specifies the succeeded state for provisioning state.
+	Succeeded ProvisioningState = "Succeeded"
+)
+
+// Reason enumerates the values for reason.
+type Reason string
+
+const (
+	// AccountNameInvalid specifies the account name invalid state for reason.
+	AccountNameInvalid Reason = "AccountNameInvalid"
+	// AlreadyExists specifies the already exists state for reason.
+	AlreadyExists Reason = "AlreadyExists"
+)
+
+// SkuName enumerates the values for sku name.
+type SkuName string
+
+const (
+	// PremiumLRS specifies the premium lrs state for sku name.
+	PremiumLRS SkuName = "Premium_LRS"
+	// StandardGRS specifies the standard grs state for sku name.
+	StandardGRS SkuName = "Standard_GRS"
+	// StandardLRS specifies the standard lrs state for sku name.
+	StandardLRS SkuName = "Standard_LRS"
+	// StandardRAGRS specifies the standard ragrs state for sku name.
+	StandardRAGRS SkuName = "Standard_RAGRS"
+	// StandardZRS specifies the standard zrs state for sku name.
+	StandardZRS SkuName = "Standard_ZRS"
+)
+
+// SkuTier enumerates the values for sku tier.
+type SkuTier string
+
+const (
+	// Premium specifies the premium state for sku tier.
+	Premium SkuTier = "Premium"
+	// Standard specifies the standard state for sku tier.
+	Standard SkuTier = "Standard"
+)
+
+// UsageUnit enumerates the values for usage unit.
+type UsageUnit string
+
+const (
+	// Bytes specifies the bytes state for usage unit.
+	Bytes UsageUnit = "Bytes"
+	// BytesPerSecond specifies the bytes per second state for usage unit.
+	BytesPerSecond UsageUnit = "BytesPerSecond"
+	// Count specifies the count state for usage unit.
+	Count UsageUnit = "Count"
+	// CountsPerSecond specifies the counts per second state for usage unit.
+	CountsPerSecond UsageUnit = "CountsPerSecond"
+	// Percent specifies the percent state for usage unit.
+	Percent UsageUnit = "Percent"
+	// Seconds specifies the seconds state for usage unit.
+	Seconds UsageUnit = "Seconds"
+)
+
+// Account is the storage account.
+type Account struct {
+	autorest.Response `json:"-"`
+	ID                *string             `json:"id,omitempty"`
+	Name              *string             `json:"name,omitempty"`
+	Type              *string             `json:"type,omitempty"`
+	Location          *string             `json:"location,omitempty"`
+	Tags              *map[string]*string `json:"tags,omitempty"`
+	Sku               *Sku                `json:"sku,omitempty"`
+	Kind              Kind                `json:"kind,omitempty"`
+	Properties        *AccountProperties  `json:"properties,omitempty"`
+}
+
+// AccountCheckNameAvailabilityParameters is
+type AccountCheckNameAvailabilityParameters struct {
+	Name *string `json:"name,omitempty"`
+	Type *string `json:"type,omitempty"`
+}
+
+// AccountCreateParameters is the parameters to provide for the account.
+type AccountCreateParameters struct {
+	Sku        *Sku                               `json:"sku,omitempty"`
+	Kind       Kind                               `json:"kind,omitempty"`
+	Location   *string                            `json:"location,omitempty"`
+	Tags       *map[string]*string                `json:"tags,omitempty"`
+	Properties *AccountPropertiesCreateParameters `json:"properties,omitempty"`
+}
+
+// AccountKey is an access key for the storage account.
+type AccountKey struct {
+	KeyName     *string       `json:"keyName,omitempty"`
+	Value       *string       `json:"value,omitempty"`
+	Permissions KeyPermission `json:"permissions,omitempty"`
+}
+
+// AccountListKeysResult is the ListKeys operation response.
+type AccountListKeysResult struct {
+	autorest.Response `json:"-"`
+	Keys              *[]AccountKey `json:"keys,omitempty"`
+}
+
+// AccountListResult is the list storage accounts operation response.
+type AccountListResult struct {
+	autorest.Response `json:"-"`
+	Value             *[]Account `json:"value,omitempty"`
+}
+
+// AccountProperties is
+type AccountProperties struct {
+	ProvisioningState   ProvisioningState `json:"provisioningState,omitempty"`
+	PrimaryEndpoints    *Endpoints        `json:"primaryEndpoints,omitempty"`
+	PrimaryLocation     *string           `json:"primaryLocation,omitempty"`
+	StatusOfPrimary     AccountStatus     `json:"statusOfPrimary,omitempty"`
+	LastGeoFailoverTime *date.Time        `json:"lastGeoFailoverTime,omitempty"`
+	SecondaryLocation   *string           `json:"secondaryLocation,omitempty"`
+	StatusOfSecondary   AccountStatus     `json:"statusOfSecondary,omitempty"`
+	CreationTime        *date.Time        `json:"creationTime,omitempty"`
+	CustomDomain        *CustomDomain     `json:"customDomain,omitempty"`
+	SecondaryEndpoints  *Endpoints        `json:"secondaryEndpoints,omitempty"`
+	Encryption          *Encryption       `json:"encryption,omitempty"`
+	AccessTier          AccessTier        `json:"accessTier,omitempty"`
+}
+
+// AccountPropertiesCreateParameters is
+type AccountPropertiesCreateParameters struct {
+	CustomDomain *CustomDomain `json:"customDomain,omitempty"`
+	Encryption   *Encryption   `json:"encryption,omitempty"`
+	AccessTier   AccessTier    `json:"accessTier,omitempty"`
+}
+
+// AccountPropertiesUpdateParameters is
+type AccountPropertiesUpdateParameters struct {
+	CustomDomain *CustomDomain `json:"customDomain,omitempty"`
+	Encryption   *Encryption   `json:"encryption,omitempty"`
+	AccessTier   AccessTier    `json:"accessTier,omitempty"`
+}
+
+// AccountRegenerateKeyParameters is
+type AccountRegenerateKeyParameters struct {
+	KeyName *string `json:"keyName,omitempty"`
+}
+
+// AccountUpdateParameters is the parameters to provide for the account.
+type AccountUpdateParameters struct {
+	Sku        *Sku                               `json:"sku,omitempty"`
+	Tags       *map[string]*string                `json:"tags,omitempty"`
+	Properties *AccountPropertiesUpdateParameters `json:"properties,omitempty"`
+}
+
+// CheckNameAvailabilityResult is the CheckNameAvailability operation response.
+type CheckNameAvailabilityResult struct {
+	autorest.Response `json:"-"`
+	NameAvailable     *bool   `json:"nameAvailable,omitempty"`
+	Reason            Reason  `json:"reason,omitempty"`
+	Message           *string `json:"message,omitempty"`
+}
+
+// CustomDomain is the custom domain assigned to this storage account. This
+// can be set via Update.
+type CustomDomain struct {
+	Name         *string `json:"name,omitempty"`
+	UseSubDomain *bool   `json:"useSubDomain,omitempty"`
+}
+
+// Encryption is the encryption settings on the account.
+type Encryption struct {
+	Services  *EncryptionServices `json:"services,omitempty"`
+	KeySource *string             `json:"keySource,omitempty"`
+}
+
+// EncryptionService is an encrypted service.
+type EncryptionService struct {
+	Enabled         *bool      `json:"enabled,omitempty"`
+	LastEnabledTime *date.Time `json:"lastEnabledTime,omitempty"`
+}
+
+// EncryptionServices is the encrypted services.
+type EncryptionServices struct {
+	Blob *EncryptionService `json:"blob,omitempty"`
+}
+
+// Endpoints is the URIs that are used to perform a retrieval of a public
+// blob, queue or table object.
+type Endpoints struct {
+	Blob  *string `json:"blob,omitempty"`
+	Queue *string `json:"queue,omitempty"`
+	Table *string `json:"table,omitempty"`
+	File  *string `json:"file,omitempty"`
+}
+
+// Resource is
+type Resource struct {
+	ID       *string             `json:"id,omitempty"`
+	Name     *string             `json:"name,omitempty"`
+	Type     *string             `json:"type,omitempty"`
+	Location *string             `json:"location,omitempty"`
+	Tags     *map[string]*string `json:"tags,omitempty"`
+}
+
+// Sku is the SKU of the storage account.
+type Sku struct {
+	Name SkuName `json:"name,omitempty"`
+	Tier SkuTier `json:"tier,omitempty"`
+}
+
+// Usage is describes Storage Resource Usage.
+type Usage struct {
+	Unit         UsageUnit  `json:"unit,omitempty"`
+	CurrentValue *int32     `json:"currentValue,omitempty"`
+	Limit        *int32     `json:"limit,omitempty"`
+	Name         *UsageName `json:"name,omitempty"`
+}
+
+// UsageListResult is the List Usages operation response.
+type UsageListResult struct {
+	autorest.Response `json:"-"`
+	Value             *[]Usage `json:"value,omitempty"`
+}
+
+// UsageName is the Usage Names.
+type UsageName struct {
+	Value          *string `json:"value,omitempty"`
+	LocalizedValue *string `json:"localizedValue,omitempty"`
+}

vendor/github.com/Azure/azure-sdk-for-go/arm/storage/usageoperations.go

@@ -0,0 +1,101 @@
+package storage
+
+// Copyright (c) Microsoft and contributors.  All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Code generated by Microsoft (R) AutoRest Code Generator 0.17.0.0
+// Changes may cause incorrect behavior and will be lost if the code is
+// regenerated.
+
+import (
+	"github.com/Azure/go-autorest/autorest"
+	"github.com/Azure/go-autorest/autorest/azure"
+	"net/http"
+)
+
+// UsageOperationsClient is the the Storage Management Client.
+type UsageOperationsClient struct {
+	ManagementClient
+}
+
+// NewUsageOperationsClient creates an instance of the UsageOperationsClient
+// client.
+func NewUsageOperationsClient(subscriptionID string) UsageOperationsClient {
+	return NewUsageOperationsClientWithBaseURI(DefaultBaseURI, subscriptionID)
+}
+
+// NewUsageOperationsClientWithBaseURI creates an instance of the
+// UsageOperationsClient client.
+func NewUsageOperationsClientWithBaseURI(baseURI string, subscriptionID string) UsageOperationsClient {
+	return UsageOperationsClient{NewWithBaseURI(baseURI, subscriptionID)}
+}
+
+// List gets the current usage count and the limit for the resources under the
+// subscription.
+func (client UsageOperationsClient) List() (result UsageListResult, err error) {
+	req, err := client.ListPreparer()
+	if err != nil {
+		return result, autorest.NewErrorWithError(err, "storage.UsageOperationsClient", "List", nil, "Failure preparing request")
+	}
+
+	resp, err := client.ListSender(req)
+	if err != nil {
+		result.Response = autorest.Response{Response: resp}
+		return result, autorest.NewErrorWithError(err, "storage.UsageOperationsClient", "List", resp, "Failure sending request")
+	}
+
+	result, err = client.ListResponder(resp)
+	if err != nil {
+		err = autorest.NewErrorWithError(err, "storage.UsageOperationsClient", "List", resp, "Failure responding to request")
+	}
+
+	return
+}
+
+// ListPreparer prepares the List request.
+func (client UsageOperationsClient) ListPreparer() (*http.Request, error) {
+	pathParameters := map[string]interface{}{
+		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
+	}
+
+	queryParameters := map[string]interface{}{
+		"api-version": client.APIVersion,
+	}
+
+	preparer := autorest.CreatePreparer(
+		autorest.AsGet(),
+		autorest.WithBaseURL(client.BaseURI),
+		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/usages", pathParameters),
+		autorest.WithQueryParameters(queryParameters))
+	return preparer.Prepare(&http.Request{})
+}
+
+// ListSender sends the List request. The method will close the
+// http.Response Body if it receives an error.
+func (client UsageOperationsClient) ListSender(req *http.Request) (*http.Response, error) {
+	return autorest.SendWithSender(client, req)
+}
+
+// ListResponder handles the response to the List request. The method always
+// closes the http.Response Body.
+func (client UsageOperationsClient) ListResponder(resp *http.Response) (result UsageListResult, err error) {
+	err = autorest.Respond(
+		resp,
+		client.ByInspecting(),
+		azure.WithErrorUnlessStatusCode(http.StatusOK),
+		autorest.ByUnmarshallingJSON(&result),
+		autorest.ByClosing())
+	result.Response = autorest.Response{Response: resp}
+	return
+}

vendor/github.com/Azure/azure-sdk-for-go/arm/storage/version.go

@@ -0,0 +1,43 @@
+package storage
+
+// Copyright (c) Microsoft and contributors.  All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Code generated by Microsoft (R) AutoRest Code Generator 0.17.0.0
+// Changes may cause incorrect behavior and will be lost if the code is
+// regenerated.
+
+import (
+	"fmt"
+)
+
+const (
+	major = "3"
+	minor = "2"
+	patch = "0"
+	// Always begin a "tag" with a dash (as per http://semver.org)
+	tag             = "-beta"
+	semVerFormat    = "%s.%s.%s%s"
+	userAgentFormat = "Azure-SDK-for-Go/%s arm-%s/%s"
+)
+
+// UserAgent returns the UserAgent string to use when sending http.Requests.
+func UserAgent() string {
+	return fmt.Sprintf(userAgentFormat, Version(), "storage", "2016-01-01")
+}
+
+// Version returns the semantic version (see http://semver.org) of the client.
+func Version() string {
+	return fmt.Sprintf(semVerFormat, major, minor, patch, tag)
+}